hopetoregistersoon wrote:got the freeze on emerald theme manager too. Freezes for like 30 seconds when i click on anything but once set it's fine
roadrash wrote:Just tried the new RC1 as a live cd and I don't know if this is normal or a bug but on my PC I was unable to see any other file systems in the file manager except the cd until I ran "Parted" and then they all appeared. Also when I checked etc/fstab before running "Parted" it also only showed the file system on the cd. Is this normal?. I'm not familiar with the XFCE edition as I use the KDE edition but even in this edition I would have expected the other file systems to have been available without having to run the partition editor.
zwopper@zwopper-lifebook-t4215 ~ $ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT
Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GM
L Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML E
xpress Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Aud
io Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (r
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (r
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (r
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Control
ler (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (re
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (re
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit
Ethernet Controller (rev 12)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Conne
ction (rev 02)
08:03.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (re
08:03.1 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (re
08:03.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller
08:03.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller
Zwopper wrote:Well I'm sad to report that my sound card behave just as strange in this version that everything based on Intrepid does...
I wonder if there is a way to have the sound card drivers from Mint 5 in Mint 6?
The problem in Mint 6 is this:
* When I plug in the headphones the internal speakers don't get muted
* I can set the microphone input as headphone out (a radio button), this mutes the internal speakers
* The problem with the above solution is that the sound get thin and distorted
I have an Intel HDA in a Fujitsu-Siemens Lifebook T4215.
Output from lspci under Mint 5:
options snd-hda-intel model=fujitsu
options snd-hda-intel probe_mask=1 model=fujitsu
options snd-hda-intel probe_mask=8 model=fujitsu
FedoraRefugee wrote:Zimbo, yes, I am using the AR5007EG (which I believe has the same problems as your chipset) in Mint 6 Gnome. But I had many problems trying to get it to work. I tried to install the Ubuntu backport module as instructed and this did not work. I then tried blacklisting ath_pci. After this was a no go I removed the backports module and tried to install the madwifi driver like I have always done. This did not work either, even trying to blacklist ath-pci or ath5k and disabling the Mint driver did not work...
sudo apt-get install linux-backports-modules-intrepid (this will also install linux-backports-modules-intrepid-generic)
sudo modprobe -r ath_pci
sudo nano /etc/modprobe.d/blacklist (add the line: blacklist ath_pci at the end of the file then save and exit)
sudo modprobe ath9k
sudo ifconfig wlan0 up
Jumped the gun before the official announcement and installed the mint 6 xfce rc1. Almost everything works except for the emerald theme manager freezing and errors with totem and xchat. I will repost the info when the bug thread for the release is official.
When trying to open an url from xchat I receive an Unable to show ...http://linuxmint.com/forum Operation Not Supported error.
Totem when trying to view a youtube video using the youtube plugin I receive a Location not found error.
This is a wired connection to router to cable modem. No proxy is used and no changes were made to the proxy settings in xfce. The same result occurs whether using wicd or network manager 0.7. Firefox and all other apps seem to work fine.
Users browsing this forum: dollyp and 10 guests