LMDE BREAKAGES - (Tracking SID!) -{CLOSED}

[craigevil]

No issues here fully upgrade sid. Might help that I am using the radeon driver, the ATI in this thing is too old for fglrx. Never had any problems over the years using nvidia.


# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

My 10 yr old IBM Thinkpad R40: running KDE4

Code: Select all

$ inxi -F
System:    Host debian Kernel 2.6.39-2-486 i686 (32 bit)
           Desktop KDE 4.6.3 (Qt 4.7.3) Distro Debian GNU/Linux wheezy/sid                                                   
Machine:   Mobo IBM model 27223YU Bios IBM version 1PET41WW (1.09 ) date 03/03/2003                                         
CPU:       Single core Intel Pentium M (-UP-) cache 1024 KB flags (sse sse2) bmips 1195.95 clocked at 600.00 MHz             
Graphics:  Card: ATI Radeon Mobility M7 LW [Radeon Mobility 7500] bus-ID: 01:00.0                                           
           X.Org 1.10.2 driver loaded: radeon Resolution 1024x768@60.0hz                                                     
           GLX Renderer Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL GLX Version 1.3 Mesa 7.10.3 Direct Rendering Yes                                                                                                                     
Audio:     Card Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver Intel ICH ports 1c00 18c0 bus-ID: 00:1f.5                                                                                                                       
           Sound: Advanced Linux Sound Architecture Version 1.0.24                                                           
Network:   Card-1 Intel 82801DB PRO/100 VE (MOB) Ethernet Controller driver e100 v: 3.5.24-k2-NAPI port 8000 bus-ID: 02:08.0
           IF: eth0 state: down speed: 10 Mbps duplex: half mac:                                           
           Card-2 Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter driver ipw2100 v: git-1.2.2 bus-ID: 02:02.0               
           IF: eth1 state: up mac:                                                                       
Drives:    HDD Total Size: 17.2GB (78.9% used) 1: /dev/sda IC25N020ATCS04 17.2GB                                             
           Optical: /dev/sr0 model: TEAC CD-224E rev: 2.9A dev-links: cdrom,scd0                                             
Partition: ID:/ size: 16G used: 13G (89%) fs: ext3 ID:/boot size: 228M used: 36M (17%) fs: ext2                             
           ID:swap-1 size: 0.51GB used: 0.00GB (0%) fs: swap                                                                 
Sensors:   System Temperatures: cpu: 47.0C mobo: 45.0C                                                                       
           Fan Speeds (in rpm): cpu: 0                                                                                       
Info:      Processes 137 Uptime 55 min Memory 469.8/1263.9MB Runlevel 2 Client Shell inxi 1.7.0-3 

[wayne128]

Debian Sid gnome fully updated, with 2.6.39-2 kernel, no issue

Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@debian:/home/wayne# uname -r
2.6.39-2-amd64

[wayne128]

today while trying out du

saw a bug 631252, so just hold on

Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
Parsing Found/Fixed information... Done
serious bugs of libwrap0 (7.6.q-19 -> 7.6.q-20) <unfixed>
#631252 - File conflict between libwrap0 and tcpd
Summary:
libwrap0(1 bug)
Are you sure you want to install/upgrade the above packages? [Y/n/?/...] n
****************************************************************************
****** Exit with an error by force in order to stop the installation. ******
****************************************************************************
E: Sub-process /usr/sbin/apt-listbugs apt || exit 10 returned an error code (10)
E: Failure running script /usr/sbin/apt-listbugs apt || exit 10
root@debian:/home/wayne#

[craigevil]

For those that might be using smxi, libwrap0 is on hold until bug 631252 is fixed.

[wayne128]

Code: Select all

serious bugs of libwrap0 (7.6.q-19 -> 7.6.q-20) <unfixed>
#631252 - File conflict between libwrap0 and tcpd
Summary:
libwrap0(1 bug)

Today check, libwrap0 had version 7.6.q-21 in Sid repos, supposed to fix the above bug

Went ahead to d.u. and succeed.

root@debian:/home/wayne# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

[craigevil]

No issues here.
Host debian Kernel 2.6.39-2-486 i686 (32 bit) Desktop KDE 4.6.4 Distro Debian GNU/Linux wheezy/sid

# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
gir1.2-glib-2.0 libgirepository-1.0-1 opera-next
3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 11.3 MB of archives.
After this operation, 1,145 kB of additional disk space will be used.
Do you want to continue [Y/n]? y

[craigevil]

If you are running KDE libqtgui4 is broken in sid.
4:4.7.3-2 is the good version if you already upgraded to -3 use the snapshot repo to downgrade or wait for the fixed packages to be uploaded to the Debian repos.

If you are using smxi libqtgui4 is on hold so d-u is safe using smxi.

Edit- New packages are already in Debian Incoming and should hit the repos soon.

From #debian-kde
WARNING: avoid libqtgui4 4:4.7.3-3 at all costs (#631652) || KDE Plasma Workspaces 4.6.4 uploaded to unstable. There won't be more until 4.6.5.

#631652 - libqtgui4 4:4.7.3-3 causes crashes in various Qt/KDE applications - Debian Bug report logs - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631652

[wayne128]

today try du on Debian Sid-gnome, saw new bug report libsqlite so just hold.

Fetched 35.8 MB in 57s (624 kB/s)
Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
Parsing Found/Fixed information... Done
serious bugs of libsqlite3-0 (3.7.6.3-1 -> 3.7.7-1) <forwarded>
#631736 - sqlite3: PRAGMA case_sensitive_like=1 fails
Summary:
libsqlite3-0(1 bug)
Are you sure you want to install/upgrade the above packages? [Y/n/?/...] n

[craigevil]

today try du on Debian Sid-gnome, saw new bug report libsqlite so just hold.

Fetched 35.8 MB in 57s (624 kB/s)
Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
Parsing Found/Fixed information... Done
serious bugs of libsqlite3-0 (3.7.6.3-1 -> 3.7.7-1) <forwarded>
#631736 - sqlite3: PRAGMA case_sensitive_like=1 fails
Summary:
libsqlite3-0(1 bug)
Are you sure you want to install/upgrade the above packages? [Y/n/?/...] n

Should already be fixed:
#631736 - sqlite3: PRAGMA case_sensitive_like=1 fails - Debian Bug report logs - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631736

Source: sqlite3
Source-Version: 3.7.7-2

We believe that the bug you reported is fixed in the latest version of
sqlite3, which is due to be installed in the Debian FTP archive:

lemon_3.7.7-2_amd64.deb
to main/s/sqlite3/lemon_3.7.7-2_amd64.deb
libsqlite3-0-dbg_3.7.7-2_amd64.deb
to main/s/sqlite3/libsqlite3-0-dbg_3.7.7-2_amd64.deb
libsqlite3-0_3.7.7-2_amd64.deb
to main/s/sqlite3/libsqlite3-0_3.7.7-2_amd64.deb
libsqlite3-dev_3.7.7-2_amd64.deb
to main/s/sqlite3/libsqlite3-dev_3.7.7-2_amd64.deb
libsqlite3-tcl_3.7.7-2_amd64.deb
to main/s/sqlite3/libsqlite3-tcl_3.7.7-2_amd64.deb
sqlite3-doc_3.7.7-2_all.deb
to main/s/sqlite3/sqlite3-doc_3.7.7-2_all.deb
sqlite3_3.7.7-2.debian.tar.gz
to main/s/sqlite3/sqlite3_3.7.7-2.debian.tar.gz
sqlite3_3.7.7-2.dsc
to main/s/sqlite3/sqlite3_3.7.7-2.dsc
sqlite3_3.7.7-2_amd64.deb
to main/s/sqlite3/sqlite3_3.7.7-2_amd64.deb

Anyway it was only an issue if you used svn, it didn't really affect anything else.
I went ahead with the upgrade when I saw the bug.
Usually the only time I won't upgrade is if the bug is 'grave' or 'severe' and might affect KDE/kdm from starting.

[wayne128]

Anyway it was only an issue if you used svn, it didn't really affect anything else.
I went ahead with the upgrade when I saw the bug.
Usually the only time I won't upgrade is if the bug is 'grave' or 'severe' and might affect KDE/kdm from starting.

Thanks craigevil for the tip.

try again today, yes , no more report on apt-listbugs and du succeeded.

Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@debian:/home/wayne#

[wayne128]

try du. saw two bugs , related to freeBSD , felt it should not harm my Debian Sid Gnome . Decided to go ahead.

gnome terminal is 3.01, read this one creates some issue like theme??

but my theme seems intact, tested other functions,
all is well on Sid.

[rhodry]

Just migrated my LMDE (Xfce) to 'sid' based. aptitude full-upgrade worked fine and everything going ok.

When others migrated here, did you have to make any adjustments to /etc/apt/preferences or other central config files? All I have done is change my debian sources.list entries and do an aptitude full-upgrade outside X.

I noticed though that Linuxmint repos are pinned higher than Debian - does that create any library dependency issues?

btw, I've made the change prompted by the new 'standard' download arrangements. Not because I don't like them - but because the new repos (copies) don't have any mirrors. My ISP has a complete Debian mirror ( in fact it has many Linux versions but not Mint) and all downloads from that mirror are 'download quota' free. Our internet plans here in Oz all have download quotas on them per month. I could have just stayed attached to 'testing' but eventually I would expect all 'standard' LMDEers will move to either "incoming" or "latest" and use the Update Pack method. ( I hope they do a better job than the old Microsoft Service Packs used to?!). So, why stay linked to testing if I'm not going to use Mint Update - I may as well move to Sid and save my quota and have some fun while I'm at it!

cheers,
rhodry.

[autocrosser]

Welcome to the "interesting" thread.....I hope you have fun here. As far as any changes, well I run Sid & Experimental with no config changes...so I would say that you are good to go.

[wayne128]

Suddenly so many packages from Sid and one serious bug, how serious?

Anyway I just hold on for a while.

264 packages upgraded, 15 newly installed, 9 to remove and 0 not upgraded.
Need to get 0 B/427 MB of archives. After unpacking 27.1 MB will be used.

Reading package fields... Done
Reading package status... Done
Retrieving bug reports... Done
Parsing Found/Fixed information... Done
serious bugs of libudev0 (171-1 -> 171-2) <unfixed>
#632322 - libudev0: missing copyright file
Summary:
libudev0(1 bug)
Are you sure you want to install/upgrade the above packages? [Y/n/?/...] n

[autocrosser]

I went ahead & did it...no problems.

[craigevil]

#632322 - libudev0: missing copyright file isn't going to affect anything, go ahead and upgrade.

The following NEW packages will be installed:
libx264-116
The following packages will be upgraded:
cpp dialog g++ gcc libgcj-common libpython2.6 libpython2.7 libv4l-0 libzbar0 mencoder mplayer python2.6 python2.6-minimal
python2.7 python2.7-minimal
15 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 23.7 MB of archives.
After this operation, 1,069 kB of additional disk space will be used.


No issues here.

[wayne128]

thanks autocrosser and craigevil ,

went ahead, but this time apt-listbugs did not flag that error.
after du, libudev0 had version 171-2

no issue
how come Debian sid is so stable?

[TheGreatSudoku]

Is anything currently broken in SID that would cause Gnome to just load my desktop wallpaper and never load the rest of Gnome? Frustrating as hell, it kind of makes me wish my computer had a face so I could punch it there.

[LifeInTheGrey]

Yeah, had the same problem on multiple systems ... my gnome-panel never shows up, and CPU usage is always a minimum of 39%. Ironically, gnome-panel is 10% of that.

Luckily, I reinstalled two of the systems back to LMDE on the new "latest" testing repo, and those are working well. I'll just ride it out and keep updating sid until its fixed.

[wayne128]

Strange. My update of Debian-Sid-gnome went well.