Laptop model:
Dell Vostro 1500 (Dell Page with Windows Drivers)http://support.dell.com/support/downloa ... id=&impid=
2GB RAM
Linux Mint 10 32bit edition.
DMESG minus my hardware MAC information.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable)
[ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fe6d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fe6d800 (usable)
[ 0.000000] modified: 000000007fe6d800 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 3707d000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009a5000 - 019176ee
[ 0.000000] Move RAMDISK from 000000003707d000 - 0000000037fef6ed to 009a5000 - 019176ed
[ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 7fe6f200 0005C (v01 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: FACP 7fe6f09c 000F4 (v04 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: DSDT 7fe6f800 05658 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 7fe7e000 00040
[ 0.000000] ACPI: HPET 7fe6f300 00038 (v01 DELL M08 00000001 ASL 00000061)
[ 0.000000] ACPI: APIC 7fe6f400 00068 (v01 DELL M08 27D80415 ASL 00000047)
[ 0.000000] ACPI: MCFG 7fe6f3c0 0003E (v16 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: SLIC 7fe6f49c 00176 (v01 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: BOOT 7fe6efc0 00028 (v01 DELL M08 27D80415 ASL 00000061)
[ 0.000000] ACPI: SSDT 7fe6dd06 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fe6d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe6d
[ 0.000000] On node 0 totalpages: 523773
[ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1919020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2317 pages used for memmap
[ 0.000000] HighMem zone: 294242 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:74000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=d8c95101-3ead-434e-95b9-76be717721f7 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10477680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (47 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved
[ 0.000000] #4 [00009a1000 - 00009a4188] BRK
[ 0.000000] #5 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #6 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #7 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #8 [00009a5000 - 0001918000] NEW RAMDISK
[ 0.000000] #9 [0001918000 - 0001919000] BOOTMEM
[ 0.000000] #10 [0001919000 - 0002919000] BOOTMEM
[ 0.000000] #11 [0002919000 - 0002919004] BOOTMEM
[ 0.000000] #12 [0002919040 - 0002919100] BOOTMEM
[ 0.000000] #13 [0002919100 - 0002919154] BOOTMEM
[ 0.000000] #14 [0002919180 - 000291c180] BOOTMEM
[ 0.000000] #15 [000291c180 - 000291c1f0] BOOTMEM
[ 0.000000] #16 [000291c200 - 0002922200] BOOTMEM
[ 0.000000] #17 [0002922200 - 0002922225] BOOTMEM
[ 0.000000] #18 [0002922240 - 0002922267] BOOTMEM
[ 0.000000] #19 [0002922280 - 0002922408] BOOTMEM
[ 0.000000] #20 [0002922440 - 0002922480] BOOTMEM
[ 0.000000] #21 [0002922480 - 00029224c0] BOOTMEM
[ 0.000000] #22 [00029224c0 - 0002922500] BOOTMEM
[ 0.000000] #23 [0002922500 - 0002922540] BOOTMEM
[ 0.000000] #24 [0002922540 - 0002922580] BOOTMEM
[ 0.000000] #25 [0002922580 - 00029225c0] BOOTMEM
[ 0.000000] #26 [00029225c0 - 0002922600] BOOTMEM
[ 0.000000] #27 [0002922600 - 0002922640] BOOTMEM
[ 0.000000] #28 [0002922640 - 0002922680] BOOTMEM
[ 0.000000] #29 [0002922680 - 00029226c0] BOOTMEM
[ 0.000000] #30 [00029226c0 - 0002922700] BOOTMEM
[ 0.000000] #31 [0002922700 - 0002922710] BOOTMEM
[ 0.000000] #32 [0002922740 - 0002922750] BOOTMEM
[ 0.000000] #33 [0002922780 - 00029227ea] BOOTMEM
[ 0.000000] #34 [0002922800 - 000292286a] BOOTMEM
[ 0.000000] #35 [0002c00000 - 0002c0e000] BOOTMEM
[ 0.000000] #36 [0002e00000 - 0002e0e000] BOOTMEM
[ 0.000000] #37 [0002924880 - 0002924884] BOOTMEM
[ 0.000000] #38 [00029248c0 - 00029248c4] BOOTMEM
[ 0.000000] #39 [0002924900 - 0002924908] BOOTMEM
[ 0.000000] #40 [0002924940 - 0002924948] BOOTMEM
[ 0.000000] #41 [0002924980 - 0002924a28] BOOTMEM
[ 0.000000] #42 [0002924a40 - 0002924aa8] BOOTMEM
[ 0.000000] #43 [0002924ac0 - 0002928ac0] BOOTMEM
[ 0.000000] #44 [0002928ac0 - 00029a8ac0] BOOTMEM
[ 0.000000] #45 [00029a8ac0 - 00029e8ac0] BOOTMEM
[ 0.000000] #46 [0002e0e000 - 000380c070] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fe6d)
[ 0.000000] Memory: 2042828k/2095540k available (4928k kernel code, 52264k reserved, 2336k data, 684k init, 1186236k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
[ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.859 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.71 BogoMIPS (lpj=7979436)
[ 0.004015] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.008011] AppArmor: AppArmor initialized
[ 0.008015] Yama: becoming mindful.
[ 0.008100] Mount-cache hash table entries: 512
[ 0.008295] Initializing cgroup subsys ns
[ 0.008301] Initializing cgroup subsys cpuacct
[ 0.008309] Initializing cgroup subsys memory
[ 0.008323] Initializing cgroup subsys devices
[ 0.008327] Initializing cgroup subsys freezer
[ 0.008331] Initializing cgroup subsys net_cls
[ 0.008373] CPU: Physical Processor ID: 0
[ 0.008377] CPU: Processor Core ID: 0
[ 0.008381] mce: CPU supports 6 MCE banks
[ 0.008395] CPU0: Thermal monitoring enabled (TM2)
[ 0.008401] using mwait in idle threads.
[ 0.008411] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.008420] PEBS disabled due to CPU errata.
[ 0.008431] ... version: 2
[ 0.008434] ... bit width: 40
[ 0.008437] ... generic registers: 2
[ 0.008440] ... value mask: 000000ffffffffff
[ 0.008444] ... max period: 000000007fffffff
[ 0.008447] ... fixed-purpose events: 3
[ 0.008450] ... event mask: 0000000700000003
[ 0.013075] ACPI: Core revision 20100428
[ 0.024014] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.024023] ftrace: allocating 21758 entries in 43 pages
[ 0.028066] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068758] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.160021] Brought up 2 CPUs
[ 0.160026] Total of 2 processors activated (7979.71 BogoMIPS).
[ 0.161094] devtmpfs: initialized
[ 0.161702] regulator: core version 0.5
[ 0.161743] Time: 22:44:14 Date: 02/17/11
[ 0.161809] NET: Registered protocol family 16
[ 0.161844] Trying to unpack rootfs image as initramfs...
[ 0.162021] EISA bus registered
[ 0.162034] ACPI: bus type pci registered
[ 0.162155] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.162160] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.162164] PCI: Using MMCONFIG for extended config space
[ 0.162168] PCI: Using configuration type 1 for base access
[ 0.168230] bio: create slab <bio-0> at 0
[ 0.170791] ACPI: EC: Look up EC in DSDT
[ 0.210288] ACPI: SSDT 7fe6e1d2 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.210288] ACPI: Dynamic OEM Table Load:
[ 0.210288] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.210288] ACPI: SSDT 7fe6e7b7 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.212657] ACPI: Dynamic OEM Table Load:
[ 0.212663] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.212780] ACPI: Interpreter enabled
[ 0.212786] ACPI: (supports S0 S3 S4 S5)
[ 0.212824] ACPI: Using IOAPIC for interrupt routing
[ 0.276220] ACPI: No dock devices found.
[ 0.276229] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.304614] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.361357] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.361364] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.361370] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.361375] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.361381] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf3ffffff]
[ 0.361386] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfebfffff]
[ 0.361391] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
[ 0.361396] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
[ 0.361401] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
[ 0.361406] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
[ 0.361411] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
[ 0.361416] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff]
[ 0.361558] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.361565] pci 0000:00:01.0: PME# disabled
[ 0.361685] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
[ 0.361773] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
[ 0.361860] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.361945] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.361953] pci 0000:00:1a.7: PME# disabled
[ 0.362015] pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
[ 0.362098] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.362106] pci 0000:00:1b.0: PME# disabled
[ 0.362239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.362247] pci 0000:00:1c.0: PME# disabled
[ 0.362385] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.362392] pci 0000:00:1c.1: PME# disabled
[ 0.362533] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.362540] pci 0000:00:1c.3: PME# disabled
[ 0.362628] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
[ 0.362715] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
[ 0.362801] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
[ 0.362889] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.362974] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.362983] pci 0000:00:1d.7: PME# disabled
[ 0.363198] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.363205] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.363213] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.363222] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.363293] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.363305] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.363316] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 0.363328] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 0.363339] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
[ 0.363409] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
[ 0.363421] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
[ 0.363433] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
[ 0.363444] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
[ 0.363456] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eef]
[ 0.363467] pci 0000:00:1f.2: reg 24: [io 0xeff0-0xefff]
[ 0.363509] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.363516] pci 0000:00:1f.2: PME# disabled
[ 0.363552] pci 0000:00:1f.3: reg 10: [mem 0xfebfbf00-0xfebfbfff]
[ 0.363587] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
[ 0.363719] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.363741] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.363763] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.363776] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.363789] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
[ 0.372025] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.372032] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.372038] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.372047] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.372132] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.372140] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372149] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.372161] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372292] pci 0000:0c:00.0: reg 10: [mem 0xf9ffc000-0xf9ffffff]
[ 0.372413] pci 0000:0c:00.0: supports D1 D2
[ 0.372449] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.372466] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.372474] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372483] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.372495] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372579] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.372587] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.372595] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff]
[ 0.372607] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.372688] pci 0000:03:00.0: reg 10: [mem 0xf9bfe000-0xf9bfffff]
[ 0.372766] pci 0000:03:00.0: supports D1 D2
[ 0.372770] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372777] pci 0000:03:00.0: PME# disabled
[ 0.372826] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.372830] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.372847] pci 0000:03:01.0: reg 10: [mem 0xf9bfd800-0xf9bfdfff]
[ 0.372925] pci 0000:03:01.0: supports D1 D2
[ 0.372929] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372937] pci 0000:03:01.0: PME# disabled
[ 0.372988] pci 0000:03:01.1: reg 10: [mem 0xf9bfd400-0xf9bfd4ff]
[ 0.373067] pci 0000:03:01.1: supports D1 D2
[ 0.373071] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373079] pci 0000:03:01.1: PME# disabled
[ 0.373128] pci 0000:03:01.2: reg 10: [mem 0xf9bfd600-0xf9bfd6ff]
[ 0.373208] pci 0000:03:01.2: supports D1 D2
[ 0.373212] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373220] pci 0000:03:01.2: PME# disabled
[ 0.373270] pci 0000:03:01.3: reg 10: [mem 0xf9bfd700-0xf9bfd7ff]
[ 0.373349] pci 0000:03:01.3: supports D1 D2
[ 0.373352] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373361] pci 0000:03:01.3: PME# disabled
[ 0.373456] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.373464] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.373472] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff]
[ 0.373484] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.373489] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.373494] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.373499] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.373504] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.373509] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf3ffffff] (subtractive decode)
[ 0.373513] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
[ 0.373518] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[ 0.373523] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
[ 0.373527] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
[ 0.373532] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
[ 0.373541] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
[ 0.373545] pci 0000:00:1e.0: bridge window [mem 0xffb00000-0xffefffff] (subtractive decode)
[ 0.373588] pci_bus 0000:00: on NUMA node 0
[ 0.373599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.374218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.374483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.374617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.374764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.374918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.400464] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
[ 0.400681] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.400893] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 0.401106] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.401320] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.401540] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.401759] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.401952] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.402055] HEST: Table is not found!
[ 0.402199] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.402211] vgaarb: loaded
[ 0.402495] SCSI subsystem initialized
[ 0.402621] libata version 3.00 loaded.
[ 0.402711] usbcore: registered new interface driver usbfs
[ 0.402733] usbcore: registered new interface driver hub
[ 0.402775] usbcore: registered new device driver usb
[ 0.403195] ACPI: WMI: Mapper loaded
[ 0.403199] PCI: Using ACPI for IRQ routing
[ 0.403204] PCI: pci_cache_line_size set to 64 bytes
[ 0.403397] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.403401] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.403406] reserve RAM buffer: 000000007fe6d800 - 000000007fffffff
[ 0.403563] NetLabel: Initializing
[ 0.403567] NetLabel: domain hash size = 128
[ 0.403570] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.403590] NetLabel: unlabeled traffic allowed by default
[ 0.403641] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.403652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.403661] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.412050] Switching to clocksource tsc
[ 0.431269] AppArmor: AppArmor Filesystem Enabled
[ 0.431290] pnp: PnP ACPI init
[ 0.431317] ACPI: bus type pnp registered
[ 0.461374] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461382] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461575] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461582] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461588] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.461594] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.494872] pnp: PnP ACPI: found 12 devices
[ 0.494876] ACPI: ACPI bus type pnp unregistered
[ 0.494883] PnPBIOS: Disabled by ACPI PNP
[ 0.494905] system 00:05: [io 0x0c80-0x0cff] could not be reserved
[ 0.494919] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.494930] system 00:09: [io 0x0900-0x097f] has been reserved
[ 0.494936] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.494946] system 00:0a: [io 0xf400-0xf4fe] has been reserved
[ 0.494952] system 00:0a: [io 0x1080-0x10bf] has been reserved
[ 0.494957] system 00:0a: [io 0x10c0-0x10df] has been reserved
[ 0.494962] system 00:0a: [io 0x0809] has been reserved
[ 0.494972] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
[ 0.494978] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
[ 0.494983] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.494988] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.494994] system 00:0b: [mem 0x00100000-0x7fe6d7ff] could not be reserved
[ 0.494999] system 00:0b: [mem 0x7fe6d800-0x7fefffff] has been reserved
[ 0.495005] system 00:0b: [mem 0x7ff00000-0x7fffffff] has been reserved
[ 0.495010] system 00:0b: [mem 0x7ff00000-0x806fffff] could not be reserved
[ 0.495015] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.495021] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
[ 0.495026] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.495031] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.495037] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.495042] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.495047] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.495052] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.495058] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.495063] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.495068] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.532344] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.532353] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.532360] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.532366] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.532372] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.532377] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.532382] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.532389] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.532396] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.532404] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 0.532410] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.532419] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.532427] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.532439] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 0.532445] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.532454] pci 0000:00:1c.1: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.532462] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.532474] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.532480] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.532490] pci 0000:00:1c.3: bridge window [mem 0xf9c00000-0xf9efffff]
[ 0.532498] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.532511] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.532514] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.532523] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xf9bfffff]
[ 0.532531] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.532556] alloc irq_desc for 16 on node -1
[ 0.532560] alloc kstat_irqs on node -1
[ 0.532571] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532578] pci 0000:00:01.0: setting latency timer to 64
[ 0.532595] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532603] pci 0000:00:1c.0: setting latency timer to 64
[ 0.532619] alloc irq_desc for 17 on node -1
[ 0.532622] alloc kstat_irqs on node -1
[ 0.532629] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.532637] pci 0000:00:1c.1: setting latency timer to 64
[ 0.532653] alloc irq_desc for 19 on node -1
[ 0.532656] alloc kstat_irqs on node -1
[ 0.532662] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.532670] pci 0000:00:1c.3: setting latency timer to 64
[ 0.532684] pci 0000:00:1e.0: setting latency timer to 64
[ 0.532692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.532696] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.532701] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.532705] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.532710] pci_bus 0000:00: resource 8 [mem 0x80000000-0xf3ffffff]
[ 0.532714] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.532718] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.532723] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.532727] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.532732] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
[ 0.532736] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
[ 0.532740] pci_bus 0000:00: resource 15 [mem 0xffb00000-0xffefffff]
[ 0.532745] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.532749] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.532754] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.532759] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.532763] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[ 0.532768] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.532772] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 0.532776] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.532781] pci_bus 0000:0c: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.532785] pci_bus 0000:0d: resource 0 [io 0xc000-0xcfff]
[ 0.532789] pci_bus 0000:0d: resource 1 [mem 0xf9c00000-0xf9efffff]
[ 0.532794] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.532799] pci_bus 0000:03: resource 1 [mem 0xf9b00000-0xf9bfffff]
[ 0.532803] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.532807] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.532812] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.532816] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.532820] pci_bus 0000:03: resource 8 [mem 0x80000000-0xf3ffffff]
[ 0.532825] pci_bus 0000:03: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.532829] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
[ 0.532834] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 0.532838] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 0.532842] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
[ 0.532847] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
[ 0.532851] pci_bus 0000:03: resource 15 [mem 0xffb00000-0xffefffff]
[ 0.532916] NET: Registered protocol family 2
[ 0.533027] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.533440] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.534004] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.534283] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.534287] TCP reno registered
[ 0.534292] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.534304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.534426] NET: Registered protocol family 1
[ 0.534682] pci 0000:01:00.0: Boot video device
[ 0.534714] PCI: CLS 64 bytes, default 64
[ 0.534753] Simple Boot Flag at 0x79 set to 0x1
[ 0.535037] cpufreq-nforce2: No nForce2 chipset.
[ 0.535088] Scanning for low memory corruption every 60 seconds
[ 0.535292] audit: initializing netlink socket (disabled)
[ 0.535313] type=2000 audit(1297982654.528:1): initialized
[ 0.553777] highmem bounce pool size: 64 pages
[ 0.553787] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.556462] VFS: Disk quotas dquot_6.5.2
[ 0.556573] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.557602] fuse init (API version 7.14)
[ 0.557759] msgmni has been set to 1673
[ 0.562125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.562130] io scheduler noop registered
[ 0.562134] io scheduler deadline registered
[ 0.562157] io scheduler cfq registered (default)
[ 0.562363] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.562407] alloc irq_desc for 40 on node -1
[ 0.562411] alloc kstat_irqs on node -1
[ 0.562424] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.562553] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.562616] alloc irq_desc for 41 on node -1
[ 0.562620] alloc kstat_irqs on node -1
[ 0.562633] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.562788] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.562851] alloc irq_desc for 42 on node -1
[ 0.562854] alloc kstat_irqs on node -1
[ 0.562867] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.563019] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.563083] alloc irq_desc for 43 on node -1
[ 0.563086] alloc kstat_irqs on node -1
[ 0.563099] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.563291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.563488] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.563648] intel_idle: MWAIT substates: 0x22220
[ 0.563652] intel_idle: does not run on family 6 model 15
[ 0.563863] ACPI: AC Adapter [AC] (on-line)
[ 0.564000] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.564567] ACPI: Lid Switch [LID]
[ 0.564648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.564656] ACPI: Power Button [PBTN]
[ 0.564732] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.564738] ACPI: Sleep Button [SBTN]
[ 0.565241] ACPI: acpi_idle registered with cpuidle
[ 0.565898] Monitor-Mwait will be used to enter C-1 state
[ 0.575907] Monitor-Mwait will be used to enter C-2 state
[ 0.575948] Monitor-Mwait will be used to enter C-3 state
[ 0.575958] Marking TSC unstable due to TSC halts in idle
[ 0.584073] Switching to clocksource hpet
[ 0.587846] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.587861] ACPI: Thermal Zone [THM] (55 C)
[ 0.588077] ERST: Table is not found!
[ 0.588381] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.591071] brd: module loaded
[ 0.591990] loop: module loaded
[ 0.591990] ata_piix 0000:00:1f.1: version 2.13
[ 0.591990] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.591990] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.591990] scsi0 : ata_piix
[ 0.592007] scsi1 : ata_piix
[ 0.593738] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 0.593744] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 0.593782] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.593791] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.593938] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.593958] isapnp: Scanning for PnP cards...
[ 0.643359] ata2: port disabled. ignoring.
[ 0.774335] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.818081] scsi2 : ata_piix
[ 0.862060] scsi3 : ata_piix
[ 0.863151] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
[ 0.863163] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
[ 0.863792] Fixed MDIO Bus: probed
[ 0.863853] PPP generic driver version 2.4.2
[ 0.863956] tun: Universal TUN/TAP device driver, 1.6
[ 0.863959] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.864116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.864152] alloc irq_desc for 22 on node -1
[ 0.864155] alloc kstat_irqs on node -1
[ 0.864167] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.864193] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.864199] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.864264] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.864306] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.868194] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.868223] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 0.872519] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T11N, A103, max UDMA/33
[ 0.887784] Freeing initrd memory: 15820k freed
[ 0.908045] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.908328] hub 1-0:1.0: USB hub found
[ 0.908337] hub 1-0:1.0: 4 ports detected
[ 0.908487] alloc irq_desc for 20 on node -1
[ 0.908491] alloc kstat_irqs on node -1
[ 0.908504] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.908535] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.908541] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.908614] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.908658] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.912539] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.912570] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 0.928018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.928198] hub 2-0:1.0: USB hub found
[ 0.928205] hub 2-0:1.0: 6 ports detected
[ 0.928345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.928376] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.928433] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.928444] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.928449] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.928506] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.928542] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 0.928742] hub 3-0:1.0: USB hub found
[ 0.928750] hub 3-0:1.0: 2 ports detected
[ 0.928866] alloc irq_desc for 21 on node -1
[ 0.928870] alloc kstat_irqs on node -1
[ 0.928878] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.928888] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.928894] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.928954] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.929002] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 0.929203] hub 4-0:1.0: USB hub found
[ 0.929210] hub 4-0:1.0: 2 ports detected
[ 0.929323] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.929333] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.929339] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.929395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.929430] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 0.929641] hub 5-0:1.0: USB hub found
[ 0.929650] hub 5-0:1.0: 2 ports detected
[ 0.929760] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.929770] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.929776] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.929836] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.929869] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 0.930068] hub 6-0:1.0: USB hub found
[ 0.930075] hub 6-0:1.0: 2 ports detected
[ 0.930189] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.930199] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.930204] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.930261] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.930296] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 0.930508] hub 7-0:1.0: USB hub found
[ 0.930515] hub 7-0:1.0: 2 ports detected
[ 0.930745] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.933526] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.933537] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.933723] mice: PS/2 mouse device common for all mice
[ 0.933972] rtc_cmos 00:03: RTC can wake from S4
[ 0.934038] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.934077] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.934276] device-mapper: uevent: version 1.0.3
[ 0.934461] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.934581] device-mapper: multipath: version 1.1.1 loaded
[ 0.934586] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.934775] EISA: Probing bus 0 at eisa.0
[ 0.934779] EISA: Cannot allocate resource for mainboard
[ 0.934784] Cannot allocate resource for EISA slot 1
[ 0.934787] Cannot allocate resource for EISA slot 2
[ 0.934791] Cannot allocate resource for EISA slot 3
[ 0.934795] Cannot allocate resource for EISA slot 4
[ 0.934799] Cannot allocate resource for EISA slot 5
[ 0.934802] Cannot allocate resource for EISA slot 6
[ 0.934806] Cannot allocate resource for EISA slot 7
[ 0.934809] Cannot allocate resource for EISA slot 8
[ 0.934812] EISA: Detected 0 cards.
[ 0.935050] cpuidle: using governor ladder
[ 0.935242] cpuidle: using governor menu
[ 0.935829] TCP cubic registered
[ 0.936072] NET: Registered protocol family 10
[ 0.936730] lo: Disabled Privacy Extensions
[ 0.937170] NET: Registered protocol family 17
[ 0.937237] Using IPI No-Shortcut mode
[ 0.937371] PM: Resume from disk failed.
[ 0.937396] registered taskstats version 1
[ 0.937892] Magic number: 15:271:755
[ 0.938012] rtc_cmos 00:03: setting system clock to 2011-02-17 22:44:15 UTC (1297982655)
[ 0.938017] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.938020] EDD information not available.
[ 0.939803] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.960199] isapnp: No Plug & Play device found
[ 0.960564] ata1.00: configured for UDMA/33
[ 0.969785] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T11N A103 PQ: 0 ANSI: 5
[ 0.981974] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.981980] Uniform CD-ROM driver Revision: 3.20
[ 0.982181] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.982287] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.656250] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.656274] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.714003] ata3.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[ 1.714009] ata3.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.728942] ata3.00: configured for UDMA/133
[ 1.729217] scsi 2:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5
[ 1.729465] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.729486] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.729564] sd 2:0:0:0: [sda] Write Protect is off
[ 1.729569] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.729664] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.730138] sda: sda1 sda2 < sda5 >
[ 1.757360] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.244145] ata4.01: failed to resume link (SControl 0)
[ 2.244206] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 2.244234] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 2.244340] Freeing unused kernel memory: 684k freed
[ 2.244908] Write protecting the kernel text: 4932k
[ 2.245006] Write protecting the kernel read-only data: 1976k
[ 2.276904] udev[92]: starting version 163
[ 2.459717] sdhci: Secure Digital Host Controller Interface driver
[ 2.459722] sdhci: Copyright(c) Pierre Ossman
[ 2.471307] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 2.471333] alloc irq_desc for 18 on node -1
[ 2.471337] alloc kstat_irqs on node -1
[ 2.471348] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.522260] Registered led device: mmc0::
[ 2.528467] Linux agpgart interface v0.103
[ 2.534316] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.534331] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
[ 2.534358] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 2.558270] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.563316] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[ 2.563331] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[ 2.563344] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[ 2.563358] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[ 2.600976] acpi device:30: registered as cooling_device2
[ 2.601837] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/LNXVIDEO:00/input/input4
[ 2.601910] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.601992] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 2.604180] ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
[ 2.728195] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[ 2.728250] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.748177] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 2.748190] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 2.748201] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 2.788162] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 2.788203] b44: b44.c:v2.0
[ 2.813431] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1c:23:82
36[ 3.056562] Btrfs loaded
[ 3.065580] xor: automatically using best checksumming function: pIII_sse
[ 3.084027] pIII_sse : 4396.000 MB/sec
[ 3.084031] xor: using function: pIII_sse (4396.000 MB/sec)
[ 3.088487] device-mapper: dm-raid45: initialized v0.2594b
[ 3.221204] firewire_core: created device fw0: GUID 484fc0001bad2981, S400
[ 3.525305] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 3.525313] EXT4-fs (sda5): write access will be enabled during recovery
[ 4.848208] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 4.848224] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787289
[ 4.848271] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787288
[ 4.848289] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787287
[ 4.848305] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787286
[ 4.848321] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787284
[ 4.848336] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 27787282
[ 4.848412] EXT4-fs (sda5): 6 orphan inodes deleted
[ 4.848418] EXT4-fs (sda5): recovery complete
[ 5.034302] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 16.216249] udev[452]: starting version 163
[ 16.266584] lp: driver loaded but no devices found
[ 16.318670] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k
[ 16.705998] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 16.743506] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 16.751612] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 16.761450] r852: driver loaded succesfully
[ 17.121182] input: Dell WMI hotkeys as /devices/virtual/input/input5
[ 17.133072] cfg80211: Calling CRDA to update world regulatory domain
[ 17.174398] nvidia: module license 'NVIDIA' taints kernel.
[ 17.174403] Disabling lock debugging due to kernel taint
[ 17.176720] cfg80211: World regulatory domain updated:
[ 17.176725] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.176731] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.176737] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.176742] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.176747] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.176752] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.237121] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 17.298621] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000/0x0
[ 17.298626] Synaptics: Clickpad mode enabled
[ 17.298632] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 17.334512] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 17.414442] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 17.414515] alloc irq_desc for 44 on node -1
[ 17.414519] alloc kstat_irqs on node -1
[ 17.414537] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 17.414586] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.521461] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 17.521600] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.536077] phy0: Selected rate control algorithm 'minstrel'
[ 17.537231] Registered led device: b43-phy0::tx
[ 17.537271] Registered led device: b43-phy0::rx
[ 17.537304] Registered led device: b43-phy0::radio
[ 17.537395] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 18.767338] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.767354] nvidia 0000:01:00.0: setting latency timer to 64
[ 18.767362] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.767577] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 18.799572] type=1400 audit(1297982673.356:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=904 comm="apparmor_parser"
[ 18.799591] type=1400 audit(1297982673.356:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=899 comm="apparmor_parser"
[ 18.800796] type=1400 audit(1297982673.356:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser"
[ 18.800985] type=1400 audit(1297982673.356:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=899 comm="apparmor_parser"
[ 18.801502] type=1400 audit(1297982673.360:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser"
[ 18.801742] type=1400 audit(1297982673.360:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=899 comm="apparmor_parser"
[ 18.804405] type=1400 audit(1297982673.360:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=906 comm="apparmor_parser"
[ 18.805679] type=1400 audit(1297982673.364:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=906 comm="apparmor_parser"
[ 18.806383] type=1400 audit(1297982673.364:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=906 comm="apparmor_parser"
[ 18.879056] type=1400 audit(1297982673.436:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=995 comm="apparmor_parser"
[ 19.228166] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 19.328824] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.344915] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.549120] ppdev: user-space parallel port driver
[ 31.361598] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 31.361605] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 31.361607] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 31.361609] vboxdrv: the usage of hardware performance counters by
[ 31.361611] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 31.361616] vboxdrv: Found 2 processor cores.
[ 31.362977] vboxdrv: fAsync=0 offMin=0x302 offMax=0x1a5e
[ 31.364447] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 31.364452] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001).
[ 33.221989] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 63.685652] wlan0: authenticate with ##:##:##:##:##:## (try 1)
[ 63.688336] wlan0: authenticated
[ 63.688676] wlan0: associate with ##:##:##:##:##:## (try 1)
[ 63.691063] wlan0: RX AssocResp from ##:##:##:##:##:## (capab=0x451 status=0 aid=3)
[ 63.691069] wlan0: associated
[ 63.692368] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 67.005591] padlock: VIA PadLock not detected.
[ 74.417032] wlan0: no IPv6 routers present
[ 87.925064] CE: hpet increased min_delta_ns to 7500 nsec
It is an awesome Linux project! I really like it. Wireless set up was a little difficult at first, but I managed to find out how to set it up in less than an hour after live CD was installed on the hard drive. I went to this distribution from trying Debian 6.0. I liked that one, but laptops usually have a non-standard set up and I felt more comfortable setting up my laptop on Mint Linux 10.