MInt 13- problém s inštaláciou [vyřešeno]

Czech forums

Moderator: KOLEGA

MInt 13- problém s inštaláciou [vyřešeno]

Postby kamowski on Sat Jul 07, 2012 12:13 pm

zdravím,
mám takýto problém:
opakovane som si stiahol iso M13 (gnome, xfce) z rôznych zrkadiel a vytvoril som si inštalačné CD, USB (tvorca štart. disku, unetbootin, imagewriter)
všetky moje pokusy o inštaláciu na notebooku ASUS A6R zlyhali :(
nabehla úvodná obrazovka, počkal som na odpočítanie sekúnd (alebo som sa preklikol na druhú obrazovku a vybral prvú možnosť), monitor preblikol na svetlo sivú farbu, potom nastala tma a tým aj koniec. Vôbec mi to nenabehne.
Skúšal som to aj v kompatibilnom režime, tam to nabehne ale bez wifi (b43:blacklist) a nie som si istý, či inštalácia na HDD v tomto režime bude úspešná.
Iné distribúcie (...11,12,gnome,KDE,....) všetky nabehnú bez problémov.
Na desktope aj na iných notebookoch to z tých istých médii nabehne.
Máte nejaký nápad ako by som zistil, kde robím chybu alebo ako zistiť, či mám chybu v notebooku ?


description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 1885MiB
*-cpu
product: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 6.14.8
serial: 0000-06E8-0000-0000-0000-0000
size: 1600MHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx constant_tsc up arch_perfmon bts aperfmperf pni monitor tm2 xtpr pdcm
*-pci
description: Host bridge
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 100
bus info: pci@0000:00:00.0
version: 01
width: 64 bits
clock: 66MHz
configuration: latency=64
resources: memory:0-1fffffff
*-pci:0
description: PCI bridge
product: RS480 PCI Bridge
vendor: ATI Technologies Inc
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master cap_list
resources: ioport:9000(size=4096) memory:fe100000-fe1fffff memory:bdf00000-ddefffff
*-display
description: VGA compatible controller
product: RC410 [Radeon Xpress 200M]
vendor: ATI Technologies Inc
physical id: 5
bus info: pci@0000:01:05.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: vga_controller bus_master cap_list rom
configuration: driver=radeon latency=64 mingnt=8
resources: irq:17 memory:c0000000-cfffffff ioport:9800(size=256) memory:fe1f0000-fe1fffff memory:fe1c0000-fe1dffff
*-usb:0
description: USB Controller
product: IXP SB400 USB Host Controller
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@0000:00:13.0
version: 80
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:19 memory:febff000-febfffff
*-usb:1
description: USB Controller
product: IXP SB400 USB Host Controller
vendor: ATI Technologies Inc
physical id: 13.1
bus info: pci@0000:00:13.1
version: 80
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:19 memory:febfe000-febfefff
*-usb:2
description: USB Controller
product: IXP SB400 USB2 Host Controller
vendor: ATI Technologies Inc
physical id: 13.2
bus info: pci@0000:00:13.2
version: 80
width: 32 bits
clock: 66MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:19 memory:febfd000-febfdfff
*-serial
description: SMBus
product: IXP SB400 SMBus Controller
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@0000:00:14.0
version: 82
width: 32 bits
clock: 66MHz
configuration: driver=piix4_smbus latency=0
resources: irq:0 ioport:b00(size=16) memory:78000000-780003ff
*-ide
description: IDE interface
product: IXP SB400 IDE Controller
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@0000:00:14.1
version: 80
width: 32 bits
clock: 66MHz
capabilities: ide bus_master cap_list
configuration: driver=pata_atiixp latency=64
resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16)
*-multimedia
description: Audio device
product: IXP SB4x0 High Definition Audio Controller
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@0000:00:14.2
version: 01
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=HDA Intel latency=64
resources: irq:40 memory:febf8000-febfbfff
*-isa
description: ISA bridge
product: IXP SB400 PCI-ISA Bridge
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@0000:00:14.3
version: 80
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:1
description: PCI bridge
product: IXP SB400 PCI-PCI Bridge
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@0000:00:14.4
version: 80
width: 32 bits
clock: 66MHz
capabilities: pci subtractive_decode bus_master
resources: ioport:a000(size=8192) memory:fe200000-feafffff memory:ddf00000-dfefffff
*-network:0
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 10
serial: 00:18:f3:27:3c:72
size: 10Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s
resources: irq:20 ioport:b800(size=256) memory:feaffc00-feaffcff
*-pcmcia
description: CardBus bridge
product: RL5c476 II
vendor: Ricoh Co Ltd
physical id: 1
bus info: pci@0000:02:01.0
version: b3
width: 64 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128
resources: iomemory:b00603020-b0060301f irq:16 memory:fe200000-fe200fff ioport:a000(size=256) ioport:a400(size=256) memory:7c000000-7fffffff memory:80000000-83ffffff
*-generic:0
description: SD Host controller
product: R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.1
bus info: pci@0000:02:01.1
version: 17
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=sdhci-pci latency=64
resources: irq:18 memory:feaff800-feaff8ff
*-generic:1 UNCLAIMED
description: System peripheral
product: R5C592 Memory Stick Bus Host Adapter
vendor: Ricoh Co Ltd
physical id: 1.2
bus info: pci@0000:02:01.2
version: 08
width: 32 bits
clock: 33MHz
capabilities: cap_list
configuration: latency=0
resources: memory:feaff400-feaff4ff
*-network:1
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:02:03.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=64
resources: irq:22 memory:feafc000-feafdfff
*-network
description: Wireless interface
physical id: 1
logical name: wlan0
serial: xxxxxxxxx
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=b43 driverversion=2.6.38-8-generic firmware=410.2160 ip=xxxxxxx multicast=yes wireless=IEEE 802.11bg
Last edited by kamowski on Wed Oct 10, 2012 3:41 pm, edited 1 time in total.
kamowski
Level 1
Level 1
 
Posts: 28
Joined: Sun May 06, 2012 2:20 pm

Linux Mint is funded by ads and donations.
 

Re: MInt 13- problém s inštaláciou

Postby labeent on Mon Jul 09, 2012 6:31 pm

Občas se mi to také stalo na některém pc. Na vině bude zřejmě aktuální konfigurace pc. Něco se špatně detekuje, často to bývá i grafika. Doporučuji odpojit přebytečné věci ( tiskárna, druhý monitor, kamera ...) a pokusit se ještě jednou. Pokud to nepomůže tak zkusit onu "kompatibilní" instalaci a poté případně doinstalovat, co bude chybět. Možná budeš muset povolit i nějaké dodatečné ovladače třetích stran.

Jinak doporučuju Cinnamon verzi Mintu.
labeent
Level 2
Level 2
 
Posts: 71
Joined: Sun Aug 21, 2011 1:30 pm
Location: Czech Republic

Re: MInt 13- problém s inštaláciou

Postby kamowski on Tue Jul 10, 2012 2:43 am

ďakujem za odpoveď
fungujem na M11, s ňou nemám žiadne problémy.
Všetky ostatné verzie skúšam na inom HDD. Ako som písal, všetky idú okrem M13 aj keď je zaujímavé, že rc verzia sa mi spustila bez problémov a mám ju aj na virtualboxe. Žiaľ už som ju vymazal z PC a bola na RW, ktoré je už prepísané :(
Tiež to tipujem na grafickú katru ale neviem ako to overiť.
Skúsil som vymeniť aj ramky z iného NB, nepomohlo.
Ešte skúsim vymeniť dvdrom, pri boot v kompatibilnom móde som v tom množstve textu :D zachytil nejakú info o sr0.
kamowski
Level 1
Level 1
 
Posts: 28
Joined: Sun May 06, 2012 2:20 pm

Re: MInt 13- problém s inštaláciou

Postby kamowski on Sat Sep 29, 2012 2:12 am

nepomohol žiaden postup, sťahujem rc verziu a vyskúšam
kamowski
Level 1
Level 1
 
Posts: 28
Joined: Sun May 06, 2012 2:20 pm

Re: MInt 13- problém s inštaláciou

Postby kamowski on Sat Sep 29, 2012 2:59 am

takže nič :( ani rc sa mi nespustilo, počkám na LM14 :wink:
kamowski
Level 1
Level 1
 
Posts: 28
Joined: Sun May 06, 2012 2:20 pm

Re: MInt 13- problém s inštaláciou

Postby kamowski on Mon Oct 08, 2012 3:44 pm

vyriešené :D
boli tam hneď dva problémy - grafika a wifi
takže: Live CD LM13 (všetky verzie)
bootmenu - šípka dole - druhá obrazovka - TAB - e - predposledný riadok - prepísať :
ro quiet splash $vt_handoff
na:
ro quiet splash radeon.modeset=0
b43.blacklist=yes (alebo: b43.blacklist=1)
kamowski
Level 1
Level 1
 
Posts: 28
Joined: Sun May 06, 2012 2:20 pm


Return to Czech

Who is online

Users browsing this forum: No registered users and 2 guests