Not deenergizing of the monitor

Questions about other topics - please check if your question fits better in another category before posting here
Forum rules
Before you post please read how to get help

Not deenergizing of the monitor

Postby gramnemo on Sat Feb 24, 2007 7:41 pm

Not deenergizing of the monitor at me is a problem on one of laptops Acer Aspire 3000 I has put sgreensawers prompt that joined after 5 minutes of inactivity and after 15 minutes of inactivity that the monitor was switched off so sgreensawers the prompt works normally but the monitor is not switched off after 15 minutes the prompt vanishes and the monitor by colors and divorces who is shone will prompt? Where to dig? I sin on HAL it can is connected?( ----- Image -----) As sometimes at start the window speaks that failed inicialise Hal it at many on such iron as it ( nautilus@NAUTILUS-ACER:~$ lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter
nautilus@NAUTILUS-ACER:~$ ) Help if probably thanks
User avatar
gramnemo
Level 2
Level 2
 
Posts: 99
Joined: Sat Nov 25, 2006 6:40 am
Location: Argentina Bs. As

Linux Mint is funded by ads and donations.
 

The problem with HAL and not deenergizing monitor is solved

Postby gramnemo on Sun Feb 25, 2007 7:58 pm

The problem with HAL and not deenergizing of the monitor is solved simply. Why that in sinaptik costs established by default ( intel driver resolution modification tool for Intel graphic chipset) chipset which to me is not necessary. It has removed then through the console and a config has exposed the driver all it works a bug Ubunty Who has it by default from a box? And what for it put by default ?
User avatar
gramnemo
Level 2
Level 2
 
Posts: 99
Joined: Sat Nov 25, 2006 6:40 am
Location: Argentina Bs. As


Return to Other topics

Who is online

Users browsing this forum: No registered users and 5 guests