Hi!
Everytime I change user (System->Quit->Change user), the secondary user can't use the mouse anymore. The mousepointer is not responding.
If I do a "ctrl+alt+f7"+Mousemovements ->then "ctrl+alt+f9", the secondary user gets the control of the mouse back.
Is this behaviour reproducable, can s.o. confirmed this bug? Is there an another way to solve this mouse trouble.
Greetings
PS: I am using Cassandra.
[solved]Switching to secondary user->Touchpad dead!
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
[solved]Switching to secondary user->Touchpad dead!
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 3 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Thanks for your feedback.
I have a radeon 9200mobility-cpu athlon 2600 m- on an acer 1355 laptop.
Take a look at my xorf.conf
I don't see any problems there. I have also tried the "ati" driver, but there is no difference. When I change user, the mouse is dead->btw the mousepointer is allready dead when I see the gdm-greeting picture.
Here is the xorg.log, while I was changing the user:
I am not a hacker so I don't really see what could be wrong.
Any ideas?
K.
I have a radeon 9200mobility-cpu athlon 2600 m- on an acer 1355 laptop.
Take a look at my xorf.conf
Code: Select all
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#
# File edited by xorg-edit v07.04.23 at Tue May 22 20:18:20 2007
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)]"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)]"
Monitor "Standardbildschirm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Here is the xorg.log, while I was changing the user:
Code: Select all
(II) AIGLX: Suspending AIGLX clients for VT switch
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81f5520)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff0000
(**) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Ok, leaving now...
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event3
(**) Option "Device" "/dev/input/event3"
(--) Synaptics Touchpad touchpad found
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(**) RADEON(0): RADEONEnterVT
(**) RADEON(0): RADEONModeInit()
1024x768 65.00 1024 1048 1256 1344 768 771 777 806 (24,32)
1024x768 65.00 1024 1048 1256 1344 768 771 777 806 (24,32)
(**) RADEON(0): Pitch = 8388736 bytes (virtualX = 1024, displayWidth = 1024)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x81f5ed0
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81f5ed0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xdbffd800
(**) RADEON(0): MC_AGP_LOCATION : 0xe07fe000
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 20067c7c to 200b5c5c
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(II) RADEON(0): [agp] Mode 0x1f000a09 [AGP 0x1106/0x3205; Card 0x1002/0x5c61]
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): RADEONSaveScreen(2)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
SetGrabKeysState - disabled
SetGrabKeysState - enabled
Any ideas?
K.
Hey!
I forgot to mention that this problem is related to my touchpad.
Example: User 2 wants his desktop. He enters the gdm. Here is the touchpad dead. When he plugs an usb-mouse in, then the usb-mouse workes. (The touchpad still refuses to work). For the primary user->both touchpad and usb-m work. When user 1 touches the touchpad to move the pointer, and then he switches to user 2-> the user 2 has full control of usbmouse *and* touchpad.
I don't know if those infos will help anyone (they didn't help me to solve my probs)
K.
sorry for my poor english...
I forgot to mention that this problem is related to my touchpad.
Example: User 2 wants his desktop. He enters the gdm. Here is the touchpad dead. When he plugs an usb-mouse in, then the usb-mouse workes. (The touchpad still refuses to work). For the primary user->both touchpad and usb-m work. When user 1 touches the touchpad to move the pointer, and then he switches to user 2-> the user 2 has full control of usbmouse *and* touchpad.
I don't know if those infos will help anyone (they didn't help me to solve my probs)
K.
sorry for my poor english...
It seems to be a ubuntu bug....let´s see if this bug will be fixed shortly.
https://bugs.launchpad.net/ubuntu/+sour ... +bug/68370[/url]
https://bugs.launchpad.net/ubuntu/+sour ... +bug/68370[/url]