Kernel freeze shortly after resume from hibernate

Questions about Grub, the liveCD and the installer
Forum rules
Before you post please read this

Kernel freeze shortly after resume from hibernate

Postby tdtodd on Tue Mar 27, 2012 1:58 am

Greetings! I'm runnning LMDE (64bit with update pack 3) on a Thinkpad
X201s and sometimes get a kernel freeze shortly after resuming from
hibernation.

I've included part of my syslog, the problem seems to occur at the
"divide error: 0000 [#1] SMP" line below. The resume eventually
finishes but I get a kernel freeze shortly afterwards.

Any ideas or help with this would be much appreciated.

Thanks,
Terry

Mar 27 00:50:33 bee kernel: [ 5740.366928] iwlagn 0000:02:00.0: RF_KILL bit toggled to enable radio.
Mar 27 00:50:33 bee kernel: [ 5740.366933] pci 0000:00:1e.0: setting latency timer to 64
Mar 27 00:50:33 bee kernel: [ 5740.370202] sd 0:0:0:0: [sda] Starting disk
Mar 27 00:50:33 bee kernel: [ 5740.403849] Extended CMOS year: 2000
Mar 27 00:50:33 bee kernel: [ 5740.474866] divide error: 0000 [#1] SMP
Mar 27 00:50:33 bee kernel: [ 5740.474871] CPU 0
Mar 27 00:50:33 bee kernel: [ 5740.474873] Modules linked in: iwlagn mac80211 aesni_intel cryptd aes_x86_64 aes_generic parport_pc ppdev lp parport bnep rfcomm acpi_cpufreq mperf cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc fuse loop dm_crypt dm_mod joydev btusb bluetooth snd_hda_codec_hdmi snd_hda_codec_conexant i915 snd_hda_intel snd_hda_codec drm_kms_helper snd_hwdep snd_pcm_oss drm snd_mixer_oss thinkpad_acpi arc4 i2c_algo_bit snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse snd_timer evdev intel_ips snd_seq_device serio_raw battery snd pcspkr i2c_i801 cfg80211 nvram rfkill soundcore tpm_tis ac tpm power_supply snd_page_alloc tpm_bios i2c_core wmi video button processor ext4 mbcache jbd2 crc16 btrfs zlib_deflate crc32c libcrc32c sg sd_mod crc_t10dif ahci libahci libata scsi_mod ehci_hcd usbcore thermal thermal_sys e1000e [last unloaded: mac80211]
Mar 27 00:50:33 bee kernel: [ 5740.474940]
Mar 27 00:50:33 bee kernel: [ 5740.474943] Pid: 470, comm: ips-monitor Tainted: G O 3.0.0-1-amd64 #1 LENOVO 514328U/514328U
Mar 27 00:50:33 bee kernel: [ 5740.474946] RIP: 0010:[<ffffffffa03bd3c8>] [<ffffffffa03bd3c8>] i915_chipset_val+0xbc/0xea [i915]
Mar 27 00:50:33 bee kernel: [ 5740.474962] RSP: 0018:ffff880231b67dd0 EFLAGS: 00010246
Mar 27 00:50:33 bee kernel: [ 5740.474964] RAX: 0000000000000004 RBX: ffff88022f7d0000 RCX: 0000000000000126
Mar 27 00:50:33 bee kernel: [ 5740.474966] RDX: 0000000000000000 RSI: 0000000000005f8c RDI: 0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474968] RBP: 0000000000530b64 R08: ffff880231b66000 R09: 00000000000000f5
Mar 27 00:50:33 bee kernel: [ 5740.474970] R10: dead000000100100 R11: 0000000000000001 R12: 0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474972] R13: 000000000031dd2b R14: 000000000000b71a R15: 000000010014c2a7
Mar 27 00:50:33 bee kernel: [ 5740.474974] FS: 0000000000000000(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474977] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Mar 27 00:50:33 bee kernel: [ 5740.474978] CR2: 0000000001bdf9f8 CR3: 0000000001603000 CR4: 00000000000006f0
Mar 27 00:50:33 bee kernel: [ 5740.474981] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Mar 27 00:50:33 bee kernel: [ 5740.474983] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Mar 27 00:50:33 bee kernel: [ 5740.474985] Process ips-monitor (pid: 470, threadinfo ffff880231b66000, task ffff880231ffd8d0)
Mar 27 00:50:33 bee kernel: [ 5740.474987] Stack:
Mar 27 00:50:33 bee kernel: [ 5740.474988] ffff88022f7d0000 000000010014c2a7 ffff880231b67e50 ffff880231ffd8d0
Mar 27 00:50:33 bee kernel: [ 5740.474992] 0000000000000077 ffffffffa03bd648 ffff880231ffd8d0 ffff8802314d7d80
Mar 27 00:50:33 bee kernel: [ 5740.474995] 000000010014c2a7 ffffffffa0278d6c ffff880231ffd8d0 ffff88022f4c6d40
Mar 27 00:50:33 bee kernel: [ 5740.474998] Call Trace:
Mar 27 00:50:33 bee kernel: [ 5740.475006] [<ffffffffa03bd648>] ? i915_read_mch_val+0x28/0x44 [i915]
Mar 27 00:50:33 bee kernel: [ 5740.475012] [<ffffffffa0278d6c>] ? ips_monitor+0x341/0x425 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475017] [<ffffffffa02782df>] ? ips_remove+0x125/0x125 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475021] [<ffffffffa0278a2b>] ? kzalloc.clone.10+0x12/0x12 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475026] [<ffffffffa0278a2b>] ? kzalloc.clone.10+0x12/0x12 [intel_ips]
Mar 27 00:50:33 bee kernel: [ 5740.475031] [<ffffffff8105fc0b>] ? kthread+0x7a/0x82
Mar 27 00:50:33 bee kernel: [ 5740.475036] [<ffffffff8133cba4>] ? kernel_thread_helper+0x4/0x10
Mar 27 00:50:33 bee kernel: [ 5740.475039] [<ffffffff8105fb91>] ? kthread_worker_fn+0x149/0x149
Mar 27 00:50:33 bee kernel: [ 5740.475042] [<ffffffff8133cba0>] ? gs_change+0x13/0x13
Mar 27 00:50:33 bee kernel: [ 5740.475043] Code: 48 63 c9 0f b7 14 cd 74 1d 3f a0 0f b7 34 cd 76 1d 3f a0 eb 0f ff c1 48 83 c6 08 83 f9 06 75 c9 31 f6 31 d2 89 d1 45 89 e4 31 d2
Mar 27 00:50:33 bee kernel: [ 5740.475062] RIP [<ffffffffa03bd3c8>] i915_chipset_val+0xbc/0xea [i915]
Mar 27 00:50:33 bee kernel: [ 5740.475069] RSP <ffff880231b67dd0>
Mar 27 00:50:33 bee kernel: [ 5740.475074] ---[ end trace 1ea35cfbaf795adf ]---
Mar 27 00:50:33 bee kernel: [ 5740.686744] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.694737] ata5: SATA link down (SStatus 0 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.702869] ata2: SATA link down (SStatus 0 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.710818] ata6: SATA link down (SStatus 0 SControl 300)
Mar 27 00:50:33 bee kernel: [ 5740.714738] usb 1-1: reset high speed USB device number 2 using ehci_hcd
Mar 27 00:50:33 bee kernel: [ 5740.740304] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Mar 27 00:50:33 bee kernel: [ 5740.740310] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.740316] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.850414] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Mar 27 00:50:33 bee kernel: [ 5740.850421] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.850427] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 27 00:50:33 bee kernel: [ 5740.920258] ata1.00: configured for UDMA/133
Mar 27 00:50:33 bee kernel: [ 5740.958712] usb 2-1: reset high speed USB device number 2 using ehci_hcd
Mar 27 00:50:33 bee kernel: [ 5741.162877] usb 1-1.3: reset full speed USB device number 3 using ehci_hcd
Mar 27 00:50:33 bee kernel: [ 5741.255632] PM: restore of devices complete after 897.179 msecs
Mar 27 00:50:33 bee kernel: [ 5741.388917] PM: Image restored successfully.
Mar 27 00:50:33 bee acpid: client 1712[0:0] has disconnected
tdtodd
Level 1
Level 1
 
Posts: 7
Joined: Tue Mar 27, 2012 1:37 am

Linux Mint is funded by ads and donations.
 

Re: Kernel freeze shortly after resume from hibernate

Postby jspice9000 on Tue May 29, 2012 10:42 pm

A bit late, but this might help you. I just installed LM13 and I had the same problem using XFCE, Cinnamon, MATE etc. I increased my swap size and the problem went away. I made my swap 150% of my RAM. I also noted the same problem running LM12 from a flash drive...

Update.
Increasing the swap helped but it would still freeze intermittently. It appears that my MSI Wind U120 had a networking issue due to the R8187SE Wifi Card. I followed instructions found on the link below which appears to have fixed fixed the issue:

http://www.pcurtis.com/wind.htm#critical_power

One tiny note for less sophisticated users (like me), gksudo works in MATE, but not Cinnamon.
jspice9000
Level 1
Level 1
 
Posts: 20
Joined: Fri Dec 25, 2009 9:08 pm


Return to Installation & Boot

Who is online

Users browsing this forum: No registered users and 5 guests