this is odd because last time i installed LMDE it worked out of the box.
well, I installed the b-43fwcutter and the broadcom firmware installer but theres still nothing working.
Code: Select all
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Subsystem: Hewlett-Packard Company Device 365e
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-ff-ff-00-ff-ff
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
what do I do next?
thanks,
>G