Code: Select all
~ $ dmesg
[ 0.000000] CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.5-1 (2013-08-07)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64 root=UUID=8862a7a5-d04f-4efe-8e4d-3f7db166e0e8 ro vga=792 splash quiet quiet splash
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9cefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9cf000-0x00000000bfa0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb08fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb09000-0x00000000bfd0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd19000-0x00000000bfd1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd5efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd5f000-0x00000000bfd9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfde3000-0x00000000bfdfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Packard Bell EasyNote TJ65 /SJV50MV , BIOS V1.28 10/06/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6d30-0x000f6d3f] mapped at [ffff8800000f6d30]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0186e000, 0x0186efff] PGTABLE
[ 0.000000] BRK [0x0186f000, 0x0186ffff] PGTABLE
[ 0.000000] BRK [0x01870000, 0x01870fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01871000, 0x01871fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf8a0fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf7fffff] page 2M
[ 0.000000] [mem 0xbf800000-0xbf8a0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf8a7000-0xbf9cefff]
[ 0.000000] [mem 0xbf8a7000-0xbf9cefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfa0f000-0xbfb08fff]
[ 0.000000] [mem 0xbfa0f000-0xbfb08fff] page 4k
[ 0.000000] BRK [0x01872000, 0x01872fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbfd0f000-0xbfd18fff]
[ 0.000000] [mem 0xbfd0f000-0xbfd18fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfd1f000-0xbfd5efff]
[ 0.000000] [mem 0xbfd1f000-0xbfd5efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfd9f000-0xbfde2fff]
[ 0.000000] [mem 0xbfd9f000-0xbfde2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfdff000-0xbfdfffff]
[ 0.000000] [mem 0xbfdff000-0xbfdfffff] page 4k
[ 0.000000] RAMDISK: [mem 0x363b8000-0x371d3fff]
[ 0.000000] ACPI: RSDP 00000000000f6bb0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bfdf5890 0005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 00000000bfde5000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfde6000 092FA (v02 Intel CANTIGA 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfd9dfc0 00040
[ 0.000000] ACPI: HPET 00000000bfdfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfdfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC 00000000bfdfedfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: APIC 00000000bfdfef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfdfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfde4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffbfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf8a0fff]
[ 0.000000] node 0: [mem 0xbf8a7000-0xbf9cefff]
[ 0.000000] node 0: [mem 0xbfa0f000-0xbfb08fff]
[ 0.000000] node 0: [mem 0xbfd0f000-0xbfd18fff]
[ 0.000000] node 0: [mem 0xbfd1f000-0xbfd5efff]
[ 0.000000] node 0: [mem 0xbfd9f000-0xbfde2fff]
[ 0.000000] node 0: [mem 0xbfdff000-0xbfdfffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1047278
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10680 pages used for memmap
[ 0.000000] DMA32 zone: 781138 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
[ 0.000000] PM: Registered nosave memory: 00000000bf9cf000 - 00000000bfa0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfb09000 - 00000000bfd0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd19000 - 00000000bfd1f000
[ 0.000000] PM: Registered nosave memory: 00000000bfd5f000 - 00000000bfd9f000
[ 0.000000] PM: Registered nosave memory: 00000000bfde3000 - 00000000bfdff000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfe00000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85184 r8192 d21312 u1048576
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032937
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-2-amd64 root=UUID=8862a7a5-d04f-4efe-8e4d-3f7db166e0e8 ro vga=792 splash quiet quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4042024k/5242880k available (3651k kernel code, 1053768k absent, 147088k reserved, 3118k data, 920k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.556 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.11 BogoMIPS (lpj=8378224)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004051] Security Framework initialized
[ 0.004057] AppArmor: AppArmor disabled by boot time parameter
[ 0.004059] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004457] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006654] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008978] Mount-cache hash table entries: 256
[ 0.009263] Initializing cgroup subsys memory
[ 0.009286] Initializing cgroup subsys devices
[ 0.009288] Initializing cgroup subsys freezer
[ 0.009291] Initializing cgroup subsys net_cls
[ 0.009293] Initializing cgroup subsys blkio
[ 0.009295] Initializing cgroup subsys perf_event
[ 0.009336] CPU: Physical Processor ID: 0
[ 0.009338] CPU: Processor Core ID: 0
[ 0.009340] mce: CPU supports 6 MCE banks
[ 0.009349] CPU0: Thermal monitoring enabled (TM1)
[ 0.009359] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.009359] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.009359] tlb_flushall_shift: -1
[ 0.009441] Freeing SMP alternatives: 12k freed
[ 0.009906] ACPI: Core revision 20130328
[ 0.014940] ACPI: All ACPI Tables successfully acquired
[ 0.016463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056671] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (fam: 06, model: 17, stepping: 0a)
[ 0.060000] APIC calibration not consistent with PM-Timer: 319ms instead of 100ms
[ 0.060000] APIC delta adjusted to PM-Timer: 1246873 (3989943)
[ 0.060000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.060000] ... version: 2
[ 0.060000] ... bit width: 40
[ 0.060000] ... generic registers: 2
[ 0.060000] ... value mask: 000000ffffffffff
[ 0.060000] ... max period: 000000007fffffff
[ 0.060000] ... fixed-purpose events: 3
[ 0.060000] ... event mask: 0000000700000003
[ 0.060000] smpboot: Booting Node 0, Processors #1 OK
[ 0.008000] CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.070855] Brought up 2 CPUs
[ 0.070860] smpboot: Total of 2 processors activated (8378.22 BogoMIPS)
[ 0.070944] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076060] devtmpfs: initialized
[ 0.079553] PM: Registering ACPI NVS region [mem 0xbfd5f000-0xbfd9efff] (262144 bytes)
[ 0.079553] regulator-dummy: no parameters
[ 0.079553] NET: Registered protocol family 16
[ 0.079553] ACPI: bus type PCI registered
[ 0.079553] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.079553] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.079553] PCI: not using MMCONFIG
[ 0.079553] PCI: Using configuration type 1 for base access
[ 0.080075] bio: create slab <bio-0> at 0
[ 0.080075] ACPI: Added _OSI(Module Device)
[ 0.080075] ACPI: Added _OSI(Processor Device)
[ 0.080075] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080075] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.081503] ACPI: EC: Look up EC in DSDT
[ 0.086999] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.087772] ACPI: SSDT 00000000bfd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.088132] ACPI: Dynamic OEM Table Load:
[ 0.088135] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.088261] ACPI: SSDT 00000000bfd19620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.088587] ACPI: Dynamic OEM Table Load:
[ 0.088590] ACPI: SSDT (null) 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.108315] ACPI: SSDT 00000000bfd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.108690] ACPI: Dynamic OEM Table Load:
[ 0.112002] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.124101] ACPI: SSDT 00000000bfd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.124448] ACPI: Dynamic OEM Table Load:
[ 0.124451] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.648073] ACPI: Interpreter enabled
[ 0.648083] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[ 0.648088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.648107] ACPI: (supports S0 S3 S4 S5)
[ 0.648109] ACPI: Using IOAPIC for interrupt routing
[ 0.648136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.649013] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.677794] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.677916] ACPI: No dock devices found.
[ 0.688321] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.689296] PCI host bridge to bus 0000:00
[ 0.689301] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.689304] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.689307] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.689310] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.689313] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.689316] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.689319] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.689322] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.689325] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.689328] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.689340] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.689363] DMAR: Forcing write-buffer flush capability
[ 0.689365] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.689483] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.689530] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.689620] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.689668] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.689763] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.689816] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.689864] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.689960] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.690020] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.690044] pci 0000:00:1a.7: reg 10: [mem 0xf3404800-0xf3404bff]
[ 0.690143] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.690193] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.690249] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.690267] pci 0000:00:1b.0: reg 10: [mem 0xf3400000-0xf3403fff 64bit]
[ 0.690343] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.690393] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.690443] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.690519] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.690614] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.690690] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.690787] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.690863] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.690968] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.691014] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.691098] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.691148] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.691196] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.691282] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.691334] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.691389] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.691485] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.691536] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.691583] pci 0000:00:1d.3: reg 20: [io 0x18a0-0x18bf]
[ 0.691673] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.691732] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.691756] pci 0000:00:1d.7: reg 10: [mem 0xf3404c00-0xf3404fff]
[ 0.691855] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.691898] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.691947] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.692030] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.692082] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.692259] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.692280] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
[ 0.692289] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
[ 0.692299] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
[ 0.692308] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
[ 0.692317] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
[ 0.692327] pci 0000:00:1f.2: reg 24: [mem 0xf3404000-0xf34047ff]
[ 0.692378] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.692484] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.692502] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.692526] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.692712] pci 0000:01:00.0: [10de:06ec] type 00 class 0x030000
[ 0.692729] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[ 0.692746] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.692763] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit]
[ 0.692775] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.692786] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.700014] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.700019] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.700023] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 0.700028] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.700281] pci 0000:02:00.0: [14e4:1698] type 00 class 0x020000
[ 0.700311] pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf300ffff 64bit]
[ 0.700474] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.700510] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.700578] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.700585] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.700680] pci 0000:03:00.0: [168c:002a] type 00 class 0x028000
[ 0.700706] pci 0000:03:00.0: reg 10: [mem 0xf3100000-0xf310ffff 64bit]
[ 0.700828] pci 0000:03:00.0: supports D1
[ 0.700830] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.700902] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.700913] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.700920] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.700996] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.701096] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.701107] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.701110] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.701113] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.701117] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.701120] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.701123] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.701126] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.701129] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.701133] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.701157] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.701160] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.701680] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.701756] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 0.701830] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[ 0.701903] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 0.701976] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[ 0.702049] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[ 0.702121] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.702194] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[ 0.702417] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.702462] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.702516] Found 1 acpi root devices
[ 0.702731] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.702830] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.702830] vgaarb: loaded
[ 0.702830] vgaarb: bridge control possible 0000:01:00.0
[ 0.702830] PCI: Using ACPI for IRQ routing
[ 0.706520] PCI: pci_cache_line_size set to 64 bytes
[ 0.706736] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.706738] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 0.706741] e820: reserve RAM buffer [mem 0xbf9cf000-0xbfffffff]
[ 0.706744] e820: reserve RAM buffer [mem 0xbfb09000-0xbfffffff]
[ 0.706747] e820: reserve RAM buffer [mem 0xbfd19000-0xbfffffff]
[ 0.706749] e820: reserve RAM buffer [mem 0xbfd5f000-0xbfffffff]
[ 0.706752] e820: reserve RAM buffer [mem 0xbfde3000-0xbfffffff]
[ 0.706754] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[ 0.706934] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.706939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.706944] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.712017] Switching to clocksource hpet
[ 0.714285] pnp: PnP ACPI init
[ 0.714306] ACPI: bus type PNP registered
[ 0.714505] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.714547] pnp 00:01: Plug and Play ACPI device, IDs SYN1b21 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.714561] pnp 00:02: [dma 4]
[ 0.714589] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.714627] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.714781] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.714786] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.714831] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.714898] system 00:06: [io 0x0480-0x048f] has been reserved
[ 0.714901] system 00:06: [io 0xffff] has been reserved
[ 0.714905] system 00:06: [io 0xffff] has been reserved
[ 0.714908] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.714912] system 00:06: [io 0x1180-0x11ff] has been reserved
[ 0.714915] system 00:06: [io 0xfe00] has been reserved
[ 0.714919] system 00:06: [mem 0xff800000-0xff800fff] has been reserved
[ 0.714922] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.714966] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.715192] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.715195] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.715199] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.715203] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.715206] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.715209] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.715213] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.715379] pnp: PnP ACPI: found 9 devices
[ 0.715381] ACPI: bus type PNP unregistered
[ 0.722558] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.722563] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.722573] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.722577] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.722587] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.722591] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.722594] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.722613] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.722616] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.722619] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.722623] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.722626] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.722629] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.722632] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.722640] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.722646] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.722650] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
[ 0.722655] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.722660] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.722664] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.722668] pci 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.722673] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0800000-0xc08000ff 64bit]
[ 0.722687] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.722690] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.722694] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.722698] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
[ 0.722703] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.722708] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.722712] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.722717] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.722722] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.722729] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.722733] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.722739] pci 0000:00:1c.1: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.722744] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.722750] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.722754] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.722760] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff]
[ 0.722765] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.722772] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.723122] pci 0000:00:1e.0: setting latency timer to 64
[ 0.723127] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.723130] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.723133] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.723135] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.723138] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.723141] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.723143] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[ 0.723146] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.723149] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.723152] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.723155] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[ 0.723158] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.723161] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.723164] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf30fffff]
[ 0.723167] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.723170] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.723173] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.723176] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.723179] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
[ 0.723182] pci_bus 0000:04: resource 1 [mem 0xc0400000-0xc05fffff]
[ 0.723184] pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.723188] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 0.723191] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 0.723193] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.723196] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.723199] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.723202] pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.723204] pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff]
[ 0.723207] pci_bus 0000:0d: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.723210] pci_bus 0000:0d: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.723267] NET: Registered protocol family 2
[ 0.723526] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.723762] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.723934] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.724046] TCP: reno registered
[ 0.724065] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.724108] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.724256] NET: Registered protocol family 1
[ 0.725640] pci 0000:01:00.0: Boot video device
[ 0.725800] PCI: CLS 64 bytes, default 64
[ 0.725860] Unpacking initramfs...
[ 4.048142] Freeing initrd memory: 14448k freed
[ 4.055447] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.055454] software IO TLB [mem 0xbb8a1000-0xbf8a1000] (64MB) mapped at [ffff8800bb8a1000-ffff8800bf8a0fff]
[ 4.055523] Simple Boot Flag at 0x57 set to 0x1
[ 4.055931] audit: initializing netlink socket (disabled)
[ 4.055947] type=2000 audit(1390372665.048:1): initialized
[ 4.071923] bounce pool size: 64 pages
[ 4.071929] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.072498] VFS: Disk quotas dquot_6.5.2
[ 4.072525] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.072631] msgmni has been set to 7922
[ 4.072863] alg: No test for stdrng (krng)
[ 4.072892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.072927] io scheduler noop registered
[ 4.072929] io scheduler deadline registered
[ 4.072942] io scheduler cfq registered (default)
[ 4.073051] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 4.073130] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 4.073206] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 4.073279] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 4.073371] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.073392] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.073445] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 4.073447] vesafb: scrolling: redraw
[ 4.073449] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.073848] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
[ 4.121564] Console: switching to colour frame buffer device 128x48
[ 4.169182] fb0: VESA VGA frame buffer device
[ 4.169201] intel_idle: does not run on family 6 model 23
[ 4.169249] GHES: HEST is not enabled!
[ 4.169319] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.169920] Linux agpgart interface v0.103
[ 4.170136] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.182474] i8042: Detected active multiplexing controller, rev 1.1
[ 4.190892] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.190899] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.190933] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.190960] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.190989] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.191136] mousedev: PS/2 mouse device common for all mice
[ 4.191496] rtc_cmos 00:07: RTC can wake from S4
[ 4.191631] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 4.191657] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 4.191667] cpuidle: using governor ladder
[ 4.191669] cpuidle: using governor menu
[ 4.191703] drop_monitor: Initializing network drop monitor service
[ 4.191793] TCP: cubic registered
[ 4.191826] NET: Registered protocol family 10
[ 4.192059] mip6: Mobile IPv6
[ 4.192062] NET: Registered protocol family 17
[ 4.192365] PM: Hibernation image not present or could not be loaded.
[ 4.192376] registered taskstats version 1
[ 4.193296] rtc_cmos 00:07: setting system clock to 2014-01-22 06:37:46 UTC (1390372666)
[ 4.194457] Freeing unused kernel memory: 920k freed
[ 4.194719] Write protecting the kernel read-only data: 6144k
[ 4.196270] Freeing unused kernel memory: 436k freed
[ 4.197970] Freeing unused kernel memory: 488k freed
[ 4.222738] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.276880] udevd[61]: starting version 175
[ 4.303357] ACPI: bus type USB registered
[ 4.303397] usbcore: registered new interface driver usbfs
[ 4.303411] usbcore: registered new interface driver hub
[ 4.336104] usbcore: registered new device driver usb
[ 4.346030] SCSI subsystem initialized
[ 4.346631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.347802] ehci-pci: EHCI PCI platform driver
[ 4.347956] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 4.347976] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 4.347989] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.347990] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.348045] ehci-pci 0000:00:1a.7: debug port 1
[ 4.351964] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 4.351997] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf3404800
[ 4.352482] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 4.353760] ACPI: Lid Switch [LID0]
[ 4.353834] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 4.353839] ACPI: Sleep Button [SLPB]
[ 4.353898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.353901] ACPI: Power Button [PWRF]
[ 4.355387] pps_core: LinuxPPS API ver. 1 registered
[ 4.355391] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.356327] PTP clock support registered
[ 4.357248] tg3.c:v3.132 (May 21, 2013)
[ 4.358639] ACPI: bus type ATA registered
[ 4.366368] libata version 3.00 loaded.
[ 4.371453] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.371490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.371493] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.371496] usb usb1: Product: EHCI Host Controller
[ 4.371499] usb usb1: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[ 4.371501] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.371682] hub 1-0:1.0: USB hub found
[ 4.371689] hub 1-0:1.0: 4 ports detected
[ 4.372074] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 4.372088] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.372096] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.372113] ehci-pci 0000:00:1d.7: debug port 1
[ 4.376044] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.391229] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3404c00
[ 4.400042] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.400102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.400105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.400108] usb usb2: Product: EHCI Host Controller
[ 4.400111] usb usb2: Manufacturer: Linux 3.10-2-amd64 ehci_hcd
[ 4.400114] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.400290] hub 2-0:1.0: USB hub found
[ 4.400298] hub 2-0:1.0: 8 ports detected
[ 4.400609] wmi: Mapper loaded
[ 4.400790] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.400795] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.400804] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.400839] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[ 4.400887] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.400891] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.400893] usb usb3: Product: UHCI Host Controller
[ 4.400896] usb usb3: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 4.400899] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.401111] hub 3-0:1.0: USB hub found
[ 4.401120] hub 3-0:1.0: 2 ports detected
[ 4.401397] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.401402] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.401411] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.401443] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[ 4.401494] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.401497] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.401500] usb usb4: Product: UHCI Host Controller
[ 4.401502] usb usb4: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 4.401505] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.401835] hub 4-0:1.0: USB hub found
[ 4.401843] hub 4-0:1.0: 2 ports detected
[ 4.402095] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.402099] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.402108] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.402143] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 4.402194] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.402197] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.402200] usb usb5: Product: UHCI Host Controller
[ 4.402202] usb usb5: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 4.402205] usb usb5: SerialNumber: 0000:00:1d.0
[ 4.402377] hub 5-0:1.0: USB hub found
[ 4.402385] hub 5-0:1.0: 2 ports detected
[ 4.402622] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.402626] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.402635] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.402682] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860
[ 4.402729] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.402732] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.402735] usb usb6: Product: UHCI Host Controller
[ 4.402737] usb usb6: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 4.402740] usb usb6: SerialNumber: 0000:00:1d.1
[ 4.402897] hub 6-0:1.0: USB hub found
[ 4.402903] hub 6-0:1.0: 2 ports detected
[ 4.403119] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.403124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.403131] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.403172] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 4.403214] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.403217] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.403220] usb usb7: Product: UHCI Host Controller
[ 4.403223] usb usb7: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 4.403225] usb usb7: SerialNumber: 0000:00:1d.2
[ 4.403368] hub 7-0:1.0: USB hub found
[ 4.403375] hub 7-0:1.0: 2 ports detected
[ 4.403514] ahci 0000:00:1f.2: version 3.0
[ 4.403665] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 4.403732] ahci: SSS flag set, parallel bus scan disabled
[ 4.403767] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.403771] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 4.403777] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.433389] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:26:2d:5f:5c:c0
[ 4.433394] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 4.433398] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.433401] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.483276] scsi0 : ahci
[ 4.483406] scsi1 : ahci
[ 4.483617] scsi2 : ahci
[ 4.483822] scsi3 : ahci
[ 4.484081] scsi4 : ahci
[ 4.484292] scsi5 : ahci
[ 4.484373] ata1: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404100 irq 44
[ 4.484376] ata2: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404180 irq 44
[ 4.484378] ata3: DUMMY
[ 4.484380] ata4: DUMMY
[ 4.484383] ata5: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404300 irq 44
[ 4.484386] ata6: SATA max UDMA/133 abar m2048@0xf3404000 port 0xf3404380 irq 44
[ 4.484682] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.484688] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.484701] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 4.484734] uhci_hcd 0000:00:1d.3: irq 18, io base 0x000018a0
[ 4.484783] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.484786] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.484789] usb usb8: Product: UHCI Host Controller
[ 4.484792] usb usb8: Manufacturer: Linux 3.10-2-amd64 uhci_hcd
[ 4.484794] usb usb8: SerialNumber: 0000:00:1d.3
[ 4.484994] hub 8-0:1.0: USB hub found
[ 4.485002] hub 8-0:1.0: 2 ports detected
[ 4.628100] acpi device:03: registered as cooling_device0
[ 4.629546] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.629614] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 4.643764] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.643768] ACPI: Thermal Zone [TZS0] (29 C)
[ 4.653944] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.653948] ACPI: Thermal Zone [TZS1] (29 C)
[ 4.712019] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 4.804022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.855467] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 4.855470] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.858030] ata1.00: configured for UDMA/133
[ 4.858186] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 4.881649] usb 2-5: New USB device found, idVendor=04f2, idProduct=b044
[ 4.881653] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 4.881655] usb 2-5: Product: CNF7017
[ 4.881658] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.881660] usb 2-5: SerialNumber: SN0001
[ 5.052017] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[ 5.052024] Switching to clocksource tsc
[ 5.176019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.190085] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, AC01, max UDMA/100
[ 5.190088] ata2.00: applying bridge limits
[ 5.202993] ata2.00: configured for UDMA/100
[ 5.205484] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C AC01 PQ: 0 ANSI: 5
[ 5.524015] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.844015] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.850032] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.850097] sd 0:0:0:0: [sda] Write Protect is off
[ 5.850101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.850128] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.854621] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.854625] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.854769] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.857099] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.857197] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.957957] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 5.958604] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.065972] uvesafb: NVIDIA Corporation, G98 Board - 05666ec0, Chip Rev , OEM: NVIDIA, VBE v3.0
[ 7.255798] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 7.255801] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 7.256825] uvesafb: scrolling: redraw
[ 7.256829] uvesafb: request region 0x3c0-0x3e0 failed
[ 7.257300] uvesafb: probe of uvesafb.0 failed with error -5
[ 7.259606] vga16fb: initializing
[ 7.259611] vga16fb: mapped to 0xffff8800000a0000
[ 7.259617] checking generic (f1000000 300000) vs hw (a0000 10000)
[ 7.259685] fb1: VGA16 VGA frame buffer device
[ 7.388014] raid6: sse2x1 3256 MB/s
[ 7.456012] raid6: sse2x2 3671 MB/s
[ 7.524008] raid6: sse2x4 6166 MB/s
[ 7.524010] raid6: using algorithm sse2x4 (6166 MB/s)
[ 7.524013] raid6: using ssse3x2 recovery algorithm
[ 7.524584] xor: measuring software checksum speed
[ 7.564004] prefetch64-sse: 8826.000 MB/sec
[ 7.604002] generic_sse: 7778.000 MB/sec
[ 7.604004] xor: using function: prefetch64-sse (8826.000 MB/sec)
[ 7.608781] bio: create slab <bio-1> at 1
[ 7.608938] Btrfs loaded
[ 7.887422] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 10.354736] udevd[434]: starting version 175
[ 12.748688] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 12.748697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.748702] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 12.748706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.748708] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 12.748713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.748715] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.779767] ACPI: AC Adapter [ADP1] (on-line)
[ 12.799800] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[ 12.861333] media: Linux media interface: v0.10
[ 12.901681] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[ 12.901690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.914970] ACPI: Requesting acpi_cpufreq
[ 12.918210] Monitor-Mwait will be used to enter C-1 state
[ 12.918224] Monitor-Mwait will be used to enter C-2 state
[ 12.918231] tsc: Marking TSC unstable due to TSC halts in idle
[ 12.918243] ACPI: acpi_idle registered with cpuidle
[ 12.918708] Switching to clocksource hpet
[ 12.925778] ACPI: Battery Slot [BAT0] (battery present)
[ 12.948440] Linux video capture interface: v2.00
[ 13.176188] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 13.176239] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[ 13.176264] platform microcode: firmware: agent loaded intel-ucode/06-17-0a into memory
[ 13.176345] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.280090] iTCO_vendor_support: vendor-support=0
[ 13.281205] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 13.281250] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 13.281379] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.358055] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 13.361247] acer_wmi: Function bitmap for Communication Device: 0x3
[ 13.361716] acer_wmi: Brightness must be controlled by acpi video driver
[ 13.361963] input: Acer BMA150 accelerometer as /devices/virtual/input/input5
[ 13.393559] cfg80211: Calling CRDA to update world regulatory domain
[ 13.453579] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
[ 13.509562] input: CNF7017 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6
[ 13.509733] usbcore: registered new interface driver uvcvideo
[ 13.509735] USB Video Class driver (1.1.1)
[ 13.999462] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
[ 14.056673] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 14.298589] ath: EEPROM regdomain: 0x65
[ 14.298593] ath: EEPROM indicates we should expect a direct regpair map
[ 14.298596] ath: Country alpha2 being used: 00
[ 14.298598] ath: Regpair used: 0x65
[ 14.375598] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.375902] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900107c0000, irq=17
[ 15.121473] nvidia: module license 'NVIDIA' taints kernel.
[ 15.121478] Disabling lock debugging due to kernel taint
[ 15.145261] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.145472] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
[ 15.402360] cfg80211: World regulatory domain updated:
[ 15.402365] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.402368] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.402370] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.402373] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.402375] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.402378] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.609779] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 15.693035] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 15.720142] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.720328] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.720486] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 18.709052] Adding 4152316k swap on /dev/sda7. Priority:-1 extents:1 across:4152316k
[ 18.766097] EXT4-fs (sda8): re-mounted. Opts: (null)
[ 19.036244] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 19.643787] device-mapper: uevent: version 1.0.3
[ 19.644126] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 20.100322] FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.172365] fuse init (API version 7.22)
[ 20.246066] loop: module loaded
[ 20.374138] lp: driver loaded but no devices found
[ 20.486627] usbserial: `0\xffffffc3\xffffff97\xffffff9761b4' invalid for parameter `product'
[ 20.512676] usbcore: registered new interface driver usbserial
[ 20.512693] usbcore: registered new interface driver usbserial_generic
[ 20.512706] usbserial: USB Serial support registered for generic
[ 20.542717] usbcore: registered new interface driver option
[ 20.542736] usbserial: USB Serial support registered for GSM modem (1-port)
[ 27.802837] ppdev: user-space parallel port driver
[ 30.285316] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[ 30.390611] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.413593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.336681] wlan0: authenticate with 00:1d:19:a4:66:27
[ 33.367633] wlan0: send auth to 00:1d:19:a4:66:27 (try 1/3)
[ 33.369515] wlan0: authenticated
[ 33.372029] wlan0: associate with 00:1d:19:a4:66:27 (try 1/3)
[ 33.377066] wlan0: RX AssocResp from 00:1d:19:a4:66:27 (capab=0x431 status=0 aid=2)
[ 33.377305] wlan0: associated
[ 33.377339] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.784553] NVRM: Your system is not currently configured to drive a VGA console
[ 35.784561] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 35.784565] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 35.784568] NVRM: drivers including, but not limited to, vesafb, may result in
[ 35.784571] NVRM: corruption and stability problems, and is not supported.
[ 864.031954] traps: nemo[3416] trap int3 ip:7fb6e2929e8d sp:7fff72e4ea00 error:0