LMDE Breakages (Tracking SID)

Post your update and upgrade related errors here
Forum rules
Before you post please read how to get help

Re: LMDE Breakages (Tracking SID)

Postby wayne128 on Wed Jun 18, 2014 5:26 am

d-u today...

reboot and found it took more than 3 minutes to boot :evil:
the longest :lol: :lol:
much worst than booting a 11-yr old presario, which can boot within 60 seconds

see systemd-analyze data

dmesg has a jump from 12 seconds to 103 seconds

Code: Select all
wayne@hp8000:~$ systemd-analyze
Startup finished in 5.525s (kernel) + 3min 4.512s (userspace) = 3min 10.038s
wayne@hp8000:~$ systemd-analyze blame
          7.521s nmbd.service
          7.364s winbind.service
          7.019s samba-ad-dc.service
          6.133s lightdm.service
          5.270s ModemManager.service
          5.175s NetworkManager.service
          4.740s exim4.service
          4.669s accounts-daemon.service
          3.539s avahi-daemon.service
          3.389s systemd-logind.service
          2.058s ntp.service
          1.678s bootlogs.service
          1.637s nfs-common.service
          1.615s systemd-fsck-root.service
          1.271s networking.service
          1.239s keyboard-setup.service
          1.238s lm-sensors.service
          1.210s kbd.service
          1.190s rsyslog.service
          1.146s polkitd.service
          1.015s minissdpd.service
           911ms nfs-kernel-server.service
           687ms dev-hugepages.mount
           622ms rpcbind.service
           616ms dev-mqueue.mount
           616ms sys-kernel-debug.mount
           528ms hdparm.service
           527ms saned.service
           490ms systemd-udev-trigger.service
           468ms systemd-tmpfiles-setup-dev.service
           461ms systemd-modules-load.service
           452ms systemd-user-sessions.service
           439ms systemd-tmpfiles-setup.service
           392ms hddtemp.service
           388ms motd.service
           345ms smbd.service
           324ms udev-finish.service
           277ms udisks2.service
           243ms console-setup.service
           238ms console-kit-log-system-start.service
           232ms upower.service
           224ms packagekit.service
           195ms systemd-remount-fs.service
           171ms pppd-dns.service
           167ms rc-local.service
           159ms alsa-restore.service
           156ms sys-fs-fuse-connections.mount
           154ms smartmontools.service
            97ms systemd-sysctl.service
            95ms systemd-update-utmp-runlevel.service
            68ms console-kit-daemon.service
            36ms systemd-udevd.service
             2ms systemd-journal-flush.service
             2ms systemd-random-seed-load.service
             1ms run-user.mount
             1ms pulseaudio.service
           981us run-lock.mount
wayne@hp8000:~$ dmesg | tail
[   12.143874] RPC: Registered tcp transport module.
[   12.143876] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.160002] FS-Cache: Loaded
[   12.173352] FS-Cache: Netfs 'nfs' registered for caching
[   12.214264] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  103.125073] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[  103.228782] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[  103.229102] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  106.633277] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  106.633321] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wayne@hp8000:~$



anyone know what is wrong on this
12.173352] FS-Cache: Netfs 'nfs' registered for caching
[ 12.214264] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[ 103.125073] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 103.228782] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X

and how to get it sorted out :idea:
wayne128
Level 10
Level 10
 
Posts: 3325
Joined: Tue Jul 13, 2010 12:15 am

Linux Mint is funded by ads and donations.
 

Re: LMDE Breakages (Tracking SID)

Postby wayne128 on Wed Jun 18, 2014 5:32 am

d-u today...

reboot and found it took more than 3 minutes to boot :evil:
the longest record..... :lol: :lol:
much worst than booting a 11-yr old presario, which can boot within 60 seconds

see systemd-analyze data

dmesg has a jump from 12 seconds to 103 seconds

Code: Select all
wayne@hp8000:~$ systemd-analyze
Startup finished in 5.525s (kernel) + 3min 4.512s (userspace) = 3min 10.038s
wayne@hp8000:~$ systemd-analyze blame
          7.521s nmbd.service
          7.364s winbind.service
          7.019s samba-ad-dc.service
          6.133s lightdm.service
          5.270s ModemManager.service
          5.175s NetworkManager.service
          4.740s exim4.service
          4.669s accounts-daemon.service
          3.539s avahi-daemon.service
          3.389s systemd-logind.service
          2.058s ntp.service
          1.678s bootlogs.service
          1.637s nfs-common.service
          1.615s systemd-fsck-root.service
          1.271s networking.service
          1.239s keyboard-setup.service
          1.238s lm-sensors.service
          1.210s kbd.service
          1.190s rsyslog.service
          1.146s polkitd.service
          1.015s minissdpd.service
           911ms nfs-kernel-server.service
           687ms dev-hugepages.mount
           622ms rpcbind.service
           616ms dev-mqueue.mount
           616ms sys-kernel-debug.mount
           528ms hdparm.service
           527ms saned.service
           490ms systemd-udev-trigger.service
           468ms systemd-tmpfiles-setup-dev.service
           461ms systemd-modules-load.service
           452ms systemd-user-sessions.service
           439ms systemd-tmpfiles-setup.service
           392ms hddtemp.service
           388ms motd.service
           345ms smbd.service
           324ms udev-finish.service
           277ms udisks2.service
           243ms console-setup.service
           238ms console-kit-log-system-start.service
           232ms upower.service
           224ms packagekit.service
           195ms systemd-remount-fs.service
           171ms pppd-dns.service
           167ms rc-local.service
           159ms alsa-restore.service
           156ms sys-fs-fuse-connections.mount
           154ms smartmontools.service
            97ms systemd-sysctl.service
            95ms systemd-update-utmp-runlevel.service
            68ms console-kit-daemon.service
            36ms systemd-udevd.service
             2ms systemd-journal-flush.service
             2ms systemd-random-seed-load.service
             1ms run-user.mount
             1ms pulseaudio.service
           981us run-lock.mount
wayne@hp8000:~$ dmesg | tail
[   12.143874] RPC: Registered tcp transport module.
[   12.143876] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.160002] FS-Cache: Loaded
[   12.173352] FS-Cache: Netfs 'nfs' registered for caching
[   12.214264] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  103.125073] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[  103.228782] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[  103.229102] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  106.633277] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  106.633321] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wayne@hp8000:~$



anyone know what is wrong on this
12.173352] FS-Cache: Netfs 'nfs' registered for caching
[ 12.214264] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[ 103.125073] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 103.228782] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X

and how to get it sorted out :idea:
wayne128
Level 10
Level 10
 
Posts: 3325
Joined: Tue Jul 13, 2010 12:15 am

Re: LMDE Breakages (Tracking SID)

Postby kurotsugi on Wed Jun 18, 2014 5:21 pm

Code: Select all
cat /var/log/apt/history.log
cat /var/log/dpkg.log
systemd-analyze critical-chain


dmesg tell you everything happened i your system. you need to filter the message with 'dmesg -l warn' or 'dmesg -l err'
kurotsugi
Level 6
Level 6
 
Posts: 1040
Joined: Fri Jan 25, 2013 3:54 am

Re: LMDE Breakages (Tracking SID)

Postby Brian49 on Thu Jun 26, 2014 12:56 pm

Something strange is going on with the xserver-xorg-video-radeon package. An upgrade has just come through, from 1:7.3.0-2 to 1:7.4.0-1. When I try to upgrade, I get a message about unmet dependencies and held packages. I do have some held packages, but they aren't dependencies of this package as far as I can see.
Brian49
Level 5
Level 5
 
Posts: 612
Joined: Thu Oct 29, 2009 2:27 pm

Re: LMDE Breakages (Tracking SID)

Postby kurotsugi on Thu Jun 26, 2014 3:24 pm

it could a chained dependency from these package
Code: Select all
libc6 (>= 2.17), libdrm-radeon1 (>= 2.4.39), libpciaccess0, libudev1 (>= 183), xorg-video-abi-15, xserver-xorg-core (>= 2:1.14.99.902)
it will be easier for us to analyze it if you show the result of 'sudo aptitude -s dist-upgrade' command.
kurotsugi
Level 6
Level 6
 
Posts: 1040
Joined: Fri Jan 25, 2013 3:54 am

Re: LMDE Breakages (Tracking SID)

Postby Brian49 on Thu Jun 26, 2014 6:27 pm

Thanks for responding. There's no informative result from 'dist-upgrade' run in a terminal - it just says '0 to upgrade', etc. The error message appears only in Synaptic. I've never seen this behaviour with any package upgrade before.
Brian49
Level 5
Level 5
 
Posts: 612
Joined: Thu Oct 29, 2009 2:27 pm

Re: LMDE Breakages (Tracking SID)

Postby kurotsugi on Fri Jun 27, 2014 3:10 am

the command have to be executed before d-u.
kurotsugi
Level 6
Level 6
 
Posts: 1040
Joined: Fri Jan 25, 2013 3:54 am

Re: LMDE Breakages (Tracking SID)

Postby Brian49 on Sat Jun 28, 2014 3:16 pm

I've located the problem. I had previously upgraded xserver-xorg-core from the Experimental repository, and it was incompatible with the xserver-xorg-video-radeon upgrade because it contained xorg-video-abi-20 instead of the required xorg-video-abi-15. I've now downgraded xserver-xorg-core, and all is well. Thank you again for your kind advice.
Brian49
Level 5
Level 5
 
Posts: 612
Joined: Thu Oct 29, 2009 2:27 pm

Re: LMDE Breakages (Tracking SID)

Postby Brian49 on Wed Jul 16, 2014 5:36 am

I've just upgraded the packages libgudev-1.0-0, libudev1 and udev to version 208-6. When I reboot, the process hangs on "waiting for /dev to be fully populated", for about 20 seconds. This never happened before the upgrade. I wonder what's going on, please? I tried setting GRUB to give verbose output, but this resulted in so much detail that I don't know what to make of it. Many thanks.
Brian49
Level 5
Level 5
 
Posts: 612
Joined: Thu Oct 29, 2009 2:27 pm

Re: LMDE Breakages (Tracking SID)

Postby kurotsugi on Wed Jul 16, 2014 2:55 pm

LMDE is abandoned. you might be the last one who use LMDE+sid. I'm afraid that no one can help you in this forum. please go to siduction thread instead :3
http://forum.siduction.org/index.php?board=22.0

anyway, grub only used to load the kernel so that you can turn on your system. you won't get much information from grub. instead of it, check your bootlog. it record anything from grub until your desktop is ready. I'm quite sure that the culprit it systemd update on today. https://tracker.debian.org/news/558376

my suggestion is try to downgrade systemd into 204.
kurotsugi
Level 6
Level 6
 
Posts: 1040
Joined: Fri Jan 25, 2013 3:54 am

Re: LMDE Breakages (Tracking SID)

Postby Brian49 on Wed Jul 16, 2014 3:50 pm

Thanks. I've been able to downgrade all the related packages to 204 from Testing, and the problem has disappeared.

I hadn't heard about the death of LMDE! It's true that my system is closer to Siduction these days.
Brian49
Level 5
Level 5
 
Posts: 612
Joined: Thu Oct 29, 2009 2:27 pm

Re: LMDE Breakages (Tracking SID)

Postby GeneC on Wed Jul 16, 2014 4:02 pm

kurotsugi wrote:LMDE is abandoned. you might be the last one who use LMDE+sid. I'm afraid that no one can help you in this forum. please go to siduction thread instead :3
http://forum.siduction.org/index.php?board=22.0

................

No its not. I'll be back as soon as a new LMDE iso is released.. :wink:
Siduction forum is an excellent source, though. Let's see if we can resurrect this LMDE SID

I had a boatload of problems with LMDE SID when debian went to systemd. But a new install of 'Spark Linux' with systemd works perfectly. So will re-visit LMDE-SID. If a new iso is not released soon (should be). I'll improvise..
GeneC

AMD Phenom2x4 3.2 ghz, 12GB DDR3, Nvidia GTX 460

Sparky Cin 2.2 (Debian Testing)
Manjaro .9.0dev (Cin 2.4) Unstable
Sparky Gnome 3.14 (SID)
User avatar
GeneC
Level 7
Level 7
 
Posts: 1575
Joined: Fri Sep 03, 2010 1:59 pm
Location: Maine, USA

Re: LMDE Breakages (Tracking SID)

Postby kurotsugi on Wed Jul 16, 2014 4:43 pm

I hadn't heard about the death of LMDE! It's true that my system is closer to Siduction these days.
what I mean was abandoned by the user. LMDE is claimed to be fully maintained by mint team. although it might be true that LMDE+sid will die when LMDE becomes based on debian stable. you can read some discussion here viewtopic.php?f=201&t=173117
No its not. I'll be back as soon as a new LMDE iso is released.. :wink:
Siduction forum is an excellent source, though. Let's see if we can resurrect this LMDE SID
it might not die yet but it definetely on the verge of dying. the mass migration to other distro is one of the reason but the biggest reason for LMDE+sid death would be LMDE migration into debian stable. when it happened this forum will officially die.

anyway, it surely fun to play around here. it's sure my pleasure to meet all of you. too bad that but lots of user can't stand the historical lack of commitment on LMDE so that most of us is already move to another distro. it's still a nice place to discuss what happened on sid (that's why I'm still around here :3) but it's not a place for looking a solution for you breakage anymore. don't worry, I'll be still around here till this forum officially die :3
kurotsugi
Level 6
Level 6
 
Posts: 1040
Joined: Fri Jan 25, 2013 3:54 am

Re: LMDE Breakages (Tracking SID)

Postby GeneC on Wed Jul 16, 2014 4:54 pm

Nice to have you around here, as well... :) Perhaps when LMDE goes stable a few folks will decide they prefer something more cutting edge and come to LMDE tracking SID and have some fun.. 8)
I updated the OP to make it more up to date. The links to other Debian SID forums are still valid I think, and they are very good. Any distro BASED on Debian SID is bound to have info that we don't.

Some may ask why use an LMDE based on SID, rather than just say using 'Siduction'. In a word (er, two words... :lol: ..) the community here. Its always been the best.
GeneC

AMD Phenom2x4 3.2 ghz, 12GB DDR3, Nvidia GTX 460

Sparky Cin 2.2 (Debian Testing)
Manjaro .9.0dev (Cin 2.4) Unstable
Sparky Gnome 3.14 (SID)
User avatar
GeneC
Level 7
Level 7
 
Posts: 1575
Joined: Fri Sep 03, 2010 1:59 pm
Location: Maine, USA

Re: LMDE Breakages (Tracking SID)

Postby wayne128 on Wed Jul 16, 2014 10:57 pm

d-u on xfce..
lost the suspense and hibernate.

this bug
https://bugs.debian.org/cgi-bin/bugrepo ... bug=752425

From: Andreas Henriksson <andreas@fatal.se>
To: 752425@bugs.debian.org
Subject: upower transition started
Date: Mon, 14 Jul 2014 13:39:14 +0200


so systemd change needs xfce to catch up


return to older version to capture outstanding bug reports.
upower transition
unetbootin
bleuz
etc


Parsing Found/Fixed information... Done
critical bugs of libffi6 (3.1~rc1+r3.0.13-12 → 3.1-2) <Outstanding>
#751907 - libffi6: cannot enable executable stack as shared object requires: Permission denied
grave bugs of memtest86+ (4.20-1.1 → 5.01-1) <Outstanding>
#753627 - memtest86+ 5.01-1 from Debian unstable doesn't work at all - always reboots at the start of tests
serious bugs of liblognorm1 (→ 1.0.1-1) <Outstanding>
#753510 - liblognorm1 - Conflicts against liblognorm0 without justification
serious bugs of unetbootin (585-2 → 603-1) <Outstanding>
#752178 - [unetbootin] The resulting usb pendrive looping with menu32.c32 error
serious bugs of xfce4-session (4.10.1-5 → 4.10.1-6) <Forwarded>
#752425 - xfce4-session: upower-1.0 transition
Merged with: 754850
grave bugs of bluez (4.101-4.1 → 5.21-1) <Pending Upload>
#754830 - bluez: rfcomm and bluetoothd fail to start
serious bugs of xfce4-power-manager (1.2.0-3 → 1.2.0-4) <Pending Upload>
#754846 - upower upgrade breaks xfce4-power-manager suspend
Merged with: 752428
wayne128
Level 10
Level 10
 
Posts: 3325
Joined: Tue Jul 13, 2010 12:15 am

Re: LMDE Breakages (Tracking SID)

Postby wayne128 on Wed Jul 16, 2014 11:53 pm

One month ago:

Re: LMDE Breakages (Tracking SID)

Postby wayne128 » Wed Jun 18, 2014 6:32 pm
d-u today...

reboot and found it took more than 3 minutes to boot :evil:
the longest record..... :lol: :lol:
much worst than booting a 11-yr old presario, which can boot within 60 seconds

see systemd-analyze data

dmesg has a jump from 12 seconds to 103 seconds



One month later, now, fully-d-u , take in all the bugs, just to see what systemd did :mrgreen:

xfce no longer has suspense and hibernate as in last post because of bugs.

dmesg | tail back to 23 seconds.. :)
wayne@hp8000:~$ dmesg | tail
[ 17.326343] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.326344] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 17.326346] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 17.326347] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 17.326349] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 19.877668] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 19.979215] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 19.979548] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 23.339854] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 23.339897] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
wayne@hp8000:~$


and.. no longer need to wait 3 minutes just to boot up :mrgreen:
wayne@hp8000:~$ systemd-analyze
Startup finished in 5.740s (kernel) + 16.989s (userspace) = 22.730s
wayne@hp8000:~$



now just waiting for xfce to catch-up with systemd :!: :!:
wayne128
Level 10
Level 10
 
Posts: 3325
Joined: Tue Jul 13, 2010 12:15 am

Re: LMDE Breakages (Tracking SID)

Postby wayne128 on Thu Jul 17, 2014 4:42 am

just for the fun of it..to check dmesg and systemd-analyze on the P4 machine

clone to this 11-year-old pentium4.
Code: Select all


:~$ inxi -Fxz
System:    Host: hp8000 Kernel: 3.14-1-686-pae i686 (32 bit gcc: 4.8.3)
           Desktop: N/A Distro: Debian GNU/Linux jessie/sid
Machine:   System: Compaq Presario 061 product: DK266A-AB4 S4150AP SE210 v: 0oK0411RE101KUNGU10
           Mobo: MICRO-STAR model: MS-6575 v: 3.10
           Bios: Phoenix v: 3.06 date: 10/16/2003
CPU:       Single core Intel Pentium 4 (-UP-) cache: 512 KB
           flags: (pae sse sse2) bmips: 4799 clocked at 2399 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV280 [Radeon 9200]
           bus-ID: 01:00.0
           Display Server: X.Org 1.15.99.904 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1440x900@59.89hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
           GLX Version: 3.0 Mesa 10.2.3 Direct Rendering: Yes
Audio:     Card Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller
           driver: snd_intel8x0 ports: e000 e400 bus-ID: 00:02.7
           Sound: Advanced Linux Sound Architecture v: k3.14-1-686-pae
Network:   Card: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet
           driver: sis900 port: e800 bus-ID: 00:04.0
           IF: eth2 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 40.0GB (28.6% used)
           ID-1: /dev/sda model: ST340015A size: 40.0GB
Partition: ID-1: / size: 19G used: 11G (62%) fs: ext4 dev: /dev/sda2
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 124 Uptime: 1 min Memory: 229.2/1262.0MB
           Init: systemd runlevel: 5 Gcc sys: 4.9.0
           Client: Shell (bash 4.3.111) inxi: 2.1.28


Code: Select all
:~$ dmesg | tail
[   27.832523] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.832527] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   27.832530] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   27.832533] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   27.832535] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   27.832538] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   27.832541] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   30.484436] eth2: Media Link Off
[   31.359344] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   35.490802] eth2: Media Link On 100mbps full-duplex
Code: Select all


:~$ systemd-analyze
Startup finished in 5.431s (kernel) + 39.514s (userspace) = 44.946s


less than a minute to boot... not bad at all... :mrgreen:

modemmanager, samba not removed.
if i remove them it should boot faster

Code: Select all

:~$ systemd-analyze blame
         27.117s nmbd.service
         25.050s samba-ad-dc.service
         12.773s ModemManager.service
         12.017s NetworkManager.service
         10.530s exim4.service
          8.950s lightdm.service
          8.899s avahi-daemon.service
          8.415s systemd-logind.service
          6.160s bootlogs.service
          4.158s keyboard-setup.service
          4.120s rsyslog.service
          4.049s ntp.service
          2.263s systemd-fsck-root.service
          2.083s lm-sensors.service
          2.071s console-screen.service
          1.910s live-config.service
          1.634s acpi-support.service
          1.610s hdparm.service
          1.332s networking.service
          1.216s systemd-sysctl.service
          1.098s smbd.service
           983ms systemd-user-sessions.service
           979ms systemd-tmpfiles-setup-dev.service
           898ms systemd-random-seed.service
           886ms user@1000.service
           852ms systemd-tmpfiles-setup.service
           785ms systemd-udev-trigger.service
           767ms nfs-common.service
           759ms console-kit-log-system-start.service
           759ms alsa-restore.service
           754ms sys-kernel-debug.mount
           753ms minissdpd.service
           742ms dev-mqueue.mount
           684ms dev-hugepages.mount
           605ms polkitd.service
           533ms console-setup.service
           524ms udev-finish.service
           517ms console-kit-daemon.service
           509ms systemd-journal-flush.service
           507ms smartmontools.service
           507ms glances.service
           487ms hddtemp.service
           482ms motd.service
           415ms upower.service
           380ms systemd-update-utmp.service
           372ms rpcbind.service
           347ms udisks2.service
           302ms kmod-static-nodes.service
           255ms swapfile.swap
           224ms systemd-udevd.service
           222ms systemd-remount-fs.service
            73ms saned.service
            50ms pppd-dns.service
            46ms rc-local.service
            43ms live.service
            34ms live-tools.service
            12ms systemd-update-utmp-runlevel.service
            12ms run-lock.mount
            10ms sys-fs-fuse-connections.mount
            10ms run-user.mount
             7ms systemd-modules-load.service
wayne128
Level 10
Level 10
 
Posts: 3325
Joined: Tue Jul 13, 2010 12:15 am

Re: LMDE Breakages (Tracking SID)

Postby GeneC on Thu Jul 17, 2014 6:49 am

Hi Wayne

Glad to see you still have your SID... :D I hope to have a SID install back soon. However 'Sparky' (Debian Testing) with systemd
Code: Select all
gene@sparky:~$ systemd-analyze
Startup finished in 3.732s (kernel) + 6.318s (userspace) = 10.051s
gene@sparky:~$ systemd-analyze blame
          2.494s exim4.service
          2.091s ModemManager.service
          2.025s NetworkManager.service
          1.936s lightdm.service
          1.861s accounts-daemon.service
          1.450s bootlogs.service
          1.311s rc-local.service
          1.151s avahi-daemon.service
          1.132s systemd-logind.service
          1.011s ntp.service
           974ms minissdpd.service
           968ms acpi-support.service
           903ms binfmt-support.service
           898ms upower.service
           848ms systemd-fsck-root.service
           700ms systemd-modules-load.service
           654ms keyboard-setup.service
           628ms rsyslog.service
           620ms ufw.service
           521ms systemd-remount-fs.service
           483ms hdparm.service
           418ms motd.service
           384ms dev-hugepages.mount
           384ms dev-mqueue.mount
           383ms sys-kernel-debug.mount
           383ms proc-sys-fs-binfmt_misc.mount
           344ms udisks2.service
           340ms saned.service
           316ms networking.service
           309ms hddtemp.service
           290ms ifplugd.service
           286ms polkitd.service
           276ms nfs-common.service
           262ms console-kit-log-system-start.service
           259ms systemd-tmpfiles-setup-dev.service
           216ms nvidia-kernel.service
           184ms dev-disk-by\x2duuid-24e0680a\x2de72f\x2d4aac\x2da3fd\x2dc0792174fdd3.swap
           179ms systemd-udev-trigger.service
           173ms media-gene-Qiana.mount
           157ms console-setup.service
           156ms lm-sensors.service
           137ms systemd-user-sessions.service
           123ms kbd.service
           111ms systemd-update-utmp-runlevel.service
            91ms pppd-dns.service
            87ms systemd-sysctl.service
            85ms rpcbind.service
            81ms pulseaudio.service
            66ms console-kit-daemon.service
            49ms systemd-random-seed-load.service
            46ms udev-finish.service
            35ms systemd-tmpfiles-setup.service
            35ms rtkit-daemon.service
            32ms media-disk1part6.mount
            29ms systemd-udevd.service
            28ms alsa-restore.service
            13ms systemd-tmpfiles-clean.service
             4ms systemd-journal-flush.service
             2ms run-lock.mount
             2ms run-user.mount
             1ms sys-fs-fuse-connections.mount
gene@sparky:~$
Last edited by GeneC on Thu Jul 17, 2014 9:01 am, edited 2 times in total.
GeneC

AMD Phenom2x4 3.2 ghz, 12GB DDR3, Nvidia GTX 460

Sparky Cin 2.2 (Debian Testing)
Manjaro .9.0dev (Cin 2.4) Unstable
Sparky Gnome 3.14 (SID)
User avatar
GeneC
Level 7
Level 7
 
Posts: 1575
Joined: Fri Sep 03, 2010 1:59 pm
Location: Maine, USA

Re: LMDE Breakages (Tracking SID)

Postby GregE on Thu Jul 17, 2014 8:07 am

I will admit to cheating. I installed a Debian Testing snapshot, then upgraded to Sid, then added Mint bits. The result is a rock stable fast booting system.

My apt sources looks like this ..

deb http://ftp.au.debian.org/debian/ unstable main contrib non-free
deb-src http://ftp.au.debian.org/debian/ unstable main contrib non-free

deb http://ftp.au.debian.org/debian/ testing main contrib non-free
deb-src http://ftp.au.debian.org/debian/ testing main contrib non-free
deb http://extra.linuxmint.com/ debian main
deb http://packages.linuxmint.com/ debian main upstream import
deb http://www.deb-multimedia.org sid main non-free

Is it LMDE? No. Is it pure Debian? No. Call it Debint. I add the bits of Mint I want and run Gnome Shell 3.12.2. I have a LMDE/Sid/Xfce4 secondary box as well. Cinnamon has never really worked on either. I could do some fancy apt-pinning but I prefer Gnome anyway.

Just my two cents worth.

ps I have an i3 2120, 8gb ram and a 256Gb SSD - cop this ....

greg@greg-desktop-1:~$ systemd-analyze
Startup finished in 1.224s (kernel) + 1.375s (userspace) = 2.599s
User avatar
GregE
Level 4
Level 4
 
Posts: 455
Joined: Sun Jan 16, 2011 6:24 am
Location: Melbourne, Australia

Re: LMDE Breakages (Tracking SID)

Postby GeneC on Thu Jul 17, 2014 9:03 am

Hi Greg..

Nice to see you still here..

I will not have a true LMDE SID either. Too hard until a new iso is released. Will use "Sparky" and like you add Mint repo and update to SID. Hopefully will do that very soon.
GeneC

AMD Phenom2x4 3.2 ghz, 12GB DDR3, Nvidia GTX 460

Sparky Cin 2.2 (Debian Testing)
Manjaro .9.0dev (Cin 2.4) Unstable
Sparky Gnome 3.14 (SID)
User avatar
GeneC
Level 7
Level 7
 
Posts: 1575
Joined: Fri Sep 03, 2010 1:59 pm
Location: Maine, USA

Linux Mint is funded by ads and donations.
 
PreviousNext

Return to Update/Upgrade Issues

Who is online

Users browsing this forum: No registered users and 4 guests