No rendering in LMDE

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read this

No rendering in LMDE

Postby johand on Tue Dec 07, 2010 5:29 pm

Hello,
I have a notebook with a ATI Radeon X1900 card.
Mint 10 works fine but I have no rendering in LMDE

I get this :

Johan@mintdebian ~ $ ./compiz-check

Gathering information about your system...

Distribution: Linux Mint
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Device 7284
Driver in use: radeon
Rendering method: None

Checking if it's possible to run Compiz on your system... [SKIP]

Checking for hardware/setup problems... [SKIP]

At least one check had to be skipped:
Error: No rendering method in use (AIGLX, Xgl or Nvidia)

I tried already a lot of things I found on the forum;but none of them worked like compiz --replace or metacity --replace etc...

don't know really what to do anymore.

can you help please ?

Thanks,

Johan

Johan
johand
Level 1
Level 1
 
Posts: 19
Joined: Sun Nov 09, 2008 7:19 am
Location: BELGIUM

Linux Mint is funded by ads and donations.
 

Re: No rendering in LMDE

Postby DrHu on Tue Dec 07, 2010 5:38 pm

Have a look thorugh the driver data, in /etc/X11/xorg.conf and see what is or is not turned on..
http://manpages.ubuntu.com/manpages/jau ... eon.4.html
http://art.ubuntuforums.org/showthread.php?t=1362818
rendering missing..

You may also get some more information/data by running compiz-check
http://ubuntu-tutorials.com/2008/05/10/ ... buntu-804/

If it's a Ubuntu (launchpad) bug
--I don't know if it is fixed yet..please check their site..
http://newyork.ubuntuforums.org/showthr ... ?t=1480218
User avatar
DrHu
Level 16
Level 16
 
Posts: 6710
Joined: Wed Jun 17, 2009 8:20 pm

Re: No rendering in LMDE

Postby johand on Tue Dec 07, 2010 5:52 pm

Thank you for the fast reply.

Well the output I have posted is already from compiz-check....

I cannot find any xorg.conf in /etc/X11/;is it located somewhere else ?

this is the output from running compiz from the command prompt.

compiz
compiz (core) - Fatal: Software rendering detected.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

Launching fallback window manager
johand
Level 1
Level 1
 
Posts: 19
Joined: Sun Nov 09, 2008 7:19 am
Location: BELGIUM

Re: No rendering in LMDE

Postby DrHu on Tue Dec 07, 2010 6:08 pm

johand wrote:I cannot find any xorg.conf in /etc/X11/;is it located somewhere else ?

Nope, however Ubuntu and I guess the freedesktop.org group have decided they don't need any manually editing of an /etc/X11/xorg.conf file by users, and so do not make one when installing their drivers for graphics cards and mice etc..

You can make your own and edit it and the system will use it, but maybe not forever into the future, if this automation method of detecting and setting graphics/desktop becomes the only method of setting up a graphic's card + desktop resolution and color settings..

sudo touch /etc/X11/xorg.conf
--would create the file, and empty one, or you could use a previous /etc/X11/xorg.conf file that worked for that display or find one on the internet, as a sample

The reason people may still want their xorg.conf file is for special devices, that are not automatically configured or if they wished to tweak the system settings; preferring some option rather than the automatically selected ones (which in all likelyhood will be of a generic type, to copver the most common settings), no matter how much automation is thrown at the problem
    User's can't handle text editing, even if it is a UNIX/Linux style system..
    --let's make it as easy as possibe for them

Everyone knows automation (computer programmatic) methods are not 100% guarenteed to succeed
--as they have already seen all the patches/updates, computer glitch failures .

/etc/X11/xorg.conf file samples..
http://www.osguides.net/operation-syste ... u-910.html
    xorg missing in later Ubuntu and Ubuntu based Linux distributions..
    --creating one
https://wiki.archlinux.org/index.php/Xorg
http://ubuntuforums.org/showthread.php?t=931280
User avatar
DrHu
Level 16
Level 16
 
Posts: 6710
Joined: Wed Jun 17, 2009 8:20 pm

Re: No rendering in LMDE

Postby johand on Sun Dec 12, 2010 12:53 pm

Thanks for the reply's.

I tried already some things without success but I was wondering:

On this same notebook I have a dualboot with Mint 10 als LMDE .

In MINT 10 everything is working fine.

Is there a possibility to copy the graphical configuration (currently on MINT 10 there is no xorg.conf) to the LMDE version somehow so I have at least the correct configuration ?

I know that I will be missing maybe the correct drivers,but that would be at least a good start.

Thanks for helping.
johand
Level 1
Level 1
 
Posts: 19
Joined: Sun Nov 09, 2008 7:19 am
Location: BELGIUM

Re: No rendering in LMDE

Postby Rami on Sun Dec 12, 2010 1:25 pm

If you are using open source driver for Radeon, you need package libgl1-mesa-dri installed for direct rendering. Check from synaptic if it is installed. It is not by default on LMDE.
Rami
Level 1
Level 1
 
Posts: 3
Joined: Sun Dec 12, 2010 1:21 pm

Re: No rendering in LMDE

Postby tdockery97 on Sun Dec 12, 2010 1:55 pm

Rami wrote:If you are using open source driver for Radeon, you need package libgl1-mesa-dri installed for direct rendering. Check from synaptic if it is installed. It is not by default on LMDE.

+1. This is the "magic" dependency that made Google Earth work on LMDE.
Image

HP Pavilion 17 Notebook, 8GB DDR3, 2.5GHZ A10-APU, Radeon HD 8650G
Registered Linux User #520972
User avatar
tdockery97
Level 13
Level 13
 
Posts: 4869
Joined: Sun Jan 10, 2010 8:54 am
Location: Salem, Oregon

Re: No rendering in LMDE

Postby johand on Sun Dec 12, 2010 4:29 pm

Well libgl1-mesa-dri was already installed.... so I'm getting a little bit desperate....

I feel I have so little control on how things are working;what driver is being used etc....

How can I check what driver is loaded/used beside the things I have already done ?

lspci gives me this :

03:00.0 VGA compatible controller: ATI Technologies Inc Device 7284

Hardinfo this :

-Display-
Resolution : 1440x900 pixels
Vendor : The X.Org Foundation
Version : 1.7.7
-Monitors-
Monitor 0 : 1440x900 pixels
-Extensions-
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
GLX
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
RANDR
RECORD
RENDER
SECURITY
SGI-GLX
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-DGA
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
-OpenGL-
Vendor : Brian Paul
Renderer : Mesa X11
Version : 2.1 Mesa 7.7.1
Direct Rendering : Yes


In Mint 10 (same notebook with rendering working ) compiz.check gives me this:

athering information about your system...

Distribution: Linux Mint
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Device 7284
Driver in use: radeon
Rendering method: AIGLX

Checking if it's possible to run Compiz on your system...

Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems...


Thanks for helping.
johand
Level 1
Level 1
 
Posts: 19
Joined: Sun Nov 09, 2008 7:19 am
Location: BELGIUM

Re: No rendering in LMDE

Postby sumski on Mon Dec 13, 2010 2:43 am

http://wiki.debian.org/AtiHowTo

you also need firmware-linux-nonfree installed
Acer Extensa 5630G - Core2Duo T5800 2GHz , 4 GB ram, Ati Mobility 3650.
OpenSUSE 12.1 KDE 4.7.3
Debian Sid KDE 4.7.1/2
User avatar
sumski
Level 3
Level 3
 
Posts: 109
Joined: Fri Nov 26, 2010 6:36 am
Location: Zagreb, Croatia

Re: No rendering in LMDE

Postby Rami on Mon Dec 13, 2010 4:42 am

Do you have libgl1-mesa-glx installed? You can test if you have direct rendering enabled with glxinfo command. Post your /var/log/Xorg.0.log here.
Rami
Level 1
Level 1
 
Posts: 3
Joined: Sun Dec 12, 2010 1:21 pm

Re: No rendering in LMDE

Postby johand on Fri Dec 24, 2010 12:05 pm

No I had libgl1-mesa-sw11 installed.
My glxinfo gives me this
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: Brian Paul
server glx version string: 1.4 Mesa 7.7.1
server glx extensions:
GLX_MESA_copy_sub_buffer, GLX_MESA_pixmap_colormap,
GLX_MESA_release_buffers, GLX_ARB_get_proc_address,
GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer
client glx vendor string: Brian Paul
client glx version string: 1.4 Mesa 7.7.1
client glx extensions:
GLX_MESA_copy_sub_buffer, GLX_MESA_pixmap_colormap,
GLX_MESA_release_buffers, GLX_ARB_get_proc_address,
GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer
GLX version: 1.4
GLX extensions:
GLX_MESA_copy_sub_buffer, GLX_MESA_pixmap_colormap,
GLX_MESA_release_buffers, GLX_ARB_get_proc_address,
GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer
OpenGL vendor string: Brian Paul
OpenGL renderer string: Mesa X11
OpenGL version string: 2.1 Mesa 7.7.1
OpenGL shading language version string: 1.20
OpenGL extensions:
GL_EXT_compiled_vertex_array, GL_EXT_texture_env_add, GL_ARB_copy_buffer,
GL_ARB_depth_texture, GL_ARB_depth_clamp, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_framebuffer_object, GL_ARB_half_float_pixel, GL_ARB_imaging,
GL_ARB_map_buffer_range, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_occlusion_query, GL_ARB_pixel_buffer_object,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_provoking_vertex,
GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_shading_language_120, GL_ARB_shadow, GL_ARB_shadow_ambient,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_bgra,
GL_ARB_vertex_array_object, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_convolution, GL_EXT_copy_texture, GL_EXT_depth_bounds_test,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_multisample, GL_EXT_framebuffer_object,
GL_EXT_fog_coord, GL_EXT_gpu_program_parameters, GL_EXT_histogram,
GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object,
GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_provoking_vertex,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_two_side,
GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB,
GL_EXT_texture_swizzle, GL_EXT_timer_query, GL_EXT_vertex_array,
GL_EXT_vertex_array_bgra, GL_3DFX_texture_compression_FXT1,
GL_APPLE_packed_pixels, GL_APPLE_vertex_array_object,
GL_ATI_blend_equation_separate, GL_ATI_envmap_bumpmap,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATI_fragment_shader, GL_ATI_separate_stencil,
GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_resize_buffers, GL_MESA_texture_array,
GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_blend_square,
GL_NV_depth_clamp, GL_NV_fragment_program, GL_NV_fragment_program_option,
GL_NV_light_max_exponent, GL_NV_packed_depth_stencil, GL_NV_point_sprite,
GL_NV_texture_env_combine4, GL_NV_texture_rectangle,
GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1,
GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGI_texture_color_table, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays

3 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 16 0 0 None
0x22 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 16 0 0 None
0x53 32 tc 0 32 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None

3 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 0 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 16 0 0 None
0x22 0 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 16 0 0 None
0x53 0 tc 0 32 0 r y . 8 8 8 0 0 16 8 16 16 16 16 0 0 None

If I change to libgl1-mesa-glx and I run glxinfo I get this :
name of display: :0.0
Segmentation fault

Thanks for helping.
johand
Level 1
Level 1
 
Posts: 19
Joined: Sun Nov 09, 2008 7:19 am
Location: BELGIUM

Re: No rendering in LMDE

Postby johand on Sat Dec 25, 2010 7:12 am

Hello,

I am a step further now and almost there.....
I can run glxgears which means rendering works now I believe.

Last thing : How to enable desktop effects ?
Before (linux Mint 9,10) in menu preferences,appearance there was a tab,where you could enable desktop effects.But it is no longer there.
When I run docky I still get :Docky requires compositing to work properly,enable compositing and restart docky

This is my xorg.log

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-686 i686 Debian
Current Operating System: Linux mintdebian 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=61134ce7-9356-4cdb-b730-844fb7d6f099 ro quiet
Build Date: 02 December 2010 01:08:37AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 25 12:52:07 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ec060
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:3:0:0) 1002:7284:1734:10ac ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xffdf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 03@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) RADEON(0): TOTO SAYS 00000000ffdf0000
(II) RADEON(0): MMIO registers at 0x00000000ffdf0000: size 64KB
(II) RADEON(0): PCI bus 3 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1900" (ChipID = 0x7284)
(--) RADEON(0): Linear framebuffer at 0x00000000c0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1734 SubsystemID: 0x10ac
IOBaseAddress: 0xd000
Filename: BR022160.003
BIOS Bootup Message:

P72IA0_FSCM68 A12 ATOMBIOS CRT/LCD/TV/DFP 470m/400e


(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 400000
(II) RADEON(0): Default Memory Clock: 470000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] This chipset requires a kernel module version of 1.17.0,
[dri] but the kernel reports a version of 2.0.0.[dri] If using legacy modesetting, upgrade your kernel.
[dri] If using kernel modesetting, make sure your module is
[dri] loaded prior to starting X, and that this driver was built
[dri] with support for KMS.
[dri] Disabling DRI.
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (256 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=110000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1440, YRes: 900, DotClock: 96300
HBlank: 320, HOverPlus: 64, HSyncWidth: 32
VBlank: 12, VOverPlus: 3, VSyncWidth: 3
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVTM1
DDC reg: 0x0
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT1: INTERNAL_KLDSCP_DAC1
DFP1: INTERNAL_KLDSCP_TMDS1
DDC reg: 0x7e50
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 1
finished all detect
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x175" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x200" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "360x200" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x600" (vrefresh out of range)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1024x768" (interlace mode not supported)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1280x960" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x480" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) RADEON(0): Not using default mode "896x672" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) RADEON(0): Not using default mode "928x696" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "832x624" (vrefresh out of range)
(II) RADEON(0): Not using default mode "416x312" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "680x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "680x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1440x900" (hsync out of range)
(II) RADEON(0): Not using default mode "720x450" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "800x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1080" (hsync out of range)
(II) RADEON(0): Not using default mode "960x540" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) RADEON(0): Printing probed modes for output LVDS
(II) RADEON(0): Modeline "1440x900"x60.0 96.30 1440 1504 1536 1760 900 903 906 912 (54.7 kHz)
(II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
(II) RADEON(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
(II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1440x900
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit c0000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0xcfffc000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1472,8191)
(II) RADEON(0): Reserved area from (0,1440) to (1472,1442)
(II) RADEON(0): Largest offscreen area available: 1472 x 6749
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xcfffc000 0x0fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 3
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00819000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x0081f000
(II) RADEON(0): Largest offscreen area available: 1472 x 6741
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1440x900 - 1760 912 0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xcfffc000 0xcfffc000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
Picked PLL 0
best_freq: 96340
best_feedback_div: 157
best_frac_feedback_div: 0
best_ref_div: 4
best_post_div: 11
(II) RADEON(0): crtc(0) Clock: mode 96300, PLL 963400
(II) RADEON(0): crtc(0) PLL : refdiv 4, fbdiv 0x9D(157), fracfbdiv 0, pdiv 11
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Output LCD1 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(EE) GLX error: Can not get required symbols.
(II) RADEON(0): Setting screen physical size to 380 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(II) config/udev: Adding input device Video Bus (/dev/input/event6)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event1)
(**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
(**) PIXART USB OPTICAL MOUSE: always reports core events
(**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event1"
(II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
(II) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
(II) PIXART USB OPTICAL MOUSE: Found relative axes
(II) PIXART USB OPTICAL MOUSE: Found x and y relative axes
(II) PIXART USB OPTICAL MOUSE: Configuring as mouse
(**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
(**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
(II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
(II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(II) config/udev: Adding input device PC Speaker (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1440x900
Dac detection success
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0


Thank you,

Johan
johand
Level 1
Level 1
 
Posts: 19
Joined: Sun Nov 09, 2008 7:19 am
Location: BELGIUM

Re: No rendering in LMDE

Postby twa on Sat Dec 25, 2010 11:53 am

Schermata.png
johand,
You can try this procedure...
Driver video open source

This is the driver pre-installed in the system and it works with every VGA used: ATI/AMD,nVIDIA and Intel.

It is recommended if you do not want to install the proprietary drivers or if these are not campatible.
If your AMD/ATI model is NOT in the "HD series" category or an Intel graphic card, you can use only this driver; if you use an AMD/ATI in the "HD series" or nVIDIA, you can use the proprietary driver which is
usually more stable and performing of the Open drivers.

The Open driver does not need to be installed, and is disabled by default.
To activate it open Synaptic and search the package named: libgl1-mesa-dri
Doble click to install the package, then click on Apply.
Close Synaptic and reboot the system.
After the system has rebooted open the terminal and type:
glxinfo | grep render
if the output is similar to the image, the driver is active and working.

Proprietary nVIDIA Video Driver
If we want the maximum from our nVIDIA video card we must install the proprietary driver.
Open the terminal and type:
su -> password
apt-get install module-assistant
apt-get install nvidia-kernel-common
apt-get install nvidia-glx
apt-get install nvdia-kernel-source
apt-get install nvidia-xconfig
after the installation need to activate the driver from the same terminal by typing:
m-a prepare
m-a a-i nvidia
modprobe nvidia
nvidia-xconfig
.
Shut-down and reboot the PC
Verify if the driver has been successfully installed by typing from the terminal:
glxinfo | grep render

Proprietary ATI/AMD video driver
are available only for the more recent models, those in the "HD series"

The models NOT in the "HD series" can use only the Open driver.

For the "HD series" this is the procedure:
download the correct driver from here: http://support.amd.com/us/gpudownload/Pages/index.aspx
put the downloaded file in your Home and rename it " driver.run "
open the terminal and type: cd /home/yourusername
make the file executable by typing: sudo chmod a+rwx driver.run
execute the file by typing : sudo ./driver.run
follow the on-screen instructions till the end of the installation
activate the driver from the same terminal by typing : sudo aticonfig --initial -f
shutdown and reboot the system open the terminal and verify if the driver has been successfully installed
by typing : glxinfo | grep render
When an issue has been resolved for you, please edit the original post to include <SOLVED> in the title. This provides a good indicator for users with a similar problem to check out the thread.
User avatar
twa
Level 4
Level 4
 
Posts: 231
Joined: Fri Sep 17, 2010 8:11 am
Location: Somewhere in the sky

Re: No rendering in LMDE

Postby Rami on Sun Dec 26, 2010 3:52 am

Do you have KMS enabled? I don't use compiz myself, but some 3D programs does not work when KMS is enabled. You can disable KMS by editing /etc/modprobe.d/radeon-kms.conf and modifying it to "options radeon modeset=0" and then reboot.
Rami
Level 1
Level 1
 
Posts: 3
Joined: Sun Dec 12, 2010 1:21 pm

Re: No rendering in LMDE

Postby johand on Mon Dec 27, 2010 3:59 pm

When I do this I get :
glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa X11


I had :libgl1-mesa-dri installed and then added
libgl1-mesa-glx which removed Mesa X11

After I have done that I get this :
glxinfo
name of display: :0.0
Segmentation fault

So it is getting worse ....

So I enabled again Mesa X11 now.

I also did this:/etc/modprobe.d/radeon-kms.conf and modifying it to "options radeon modeset=0" and then reboot.
without result.

I believe I have to stick with Linux Mint 10,I'm getting desperate now.....

Already thanks for your help.
johand
Level 1
Level 1
 
Posts: 19
Joined: Sun Nov 09, 2008 7:19 am
Location: BELGIUM

Linux Mint is funded by ads and donations.
 

Return to Newbie Questions

Who is online

Users browsing this forum: No registered users and 4 guests