Start up problem

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read this

Start up problem

Postby fedekun on Thu Feb 03, 2011 11:36 am

Hi all, I just intalled linux mint 10 on my netbook, just the normal edition, everything works nice so far, the only problem I had is that when linux is loading, it sometimes freezes, it freezes once it finished loading, and it wont even display the login screen, sometimes it shows the mouse pointer but i cant move it.
fedekun
Level 1
Level 1
 
Posts: 4
Joined: Thu Feb 03, 2011 11:30 am

Linux Mint is funded by ads and donations.
 

Re: Start up problem

Postby inktitan on Fri Feb 04, 2011 2:27 am

Have you run all of the updates? Can you hit ctrl+alt+F1 and get a command line at that point or is the whole system frozen?
Proud hugger of Penguins.
Pentium D 2.8Ghz, 3 GB RAM, 1 GB Nvidia GT 240, Linux Mint Debian
“...not the strongest...survives, nor the most intelligent... It is...the [one] most adaptable to change.”~C.D.
Please do not post new topics in [solved] topics
User avatar
inktitan
Level 5
Level 5
 
Posts: 900
Joined: Wed Aug 18, 2010 10:51 pm
Location: Houston, Tx

Re: Start up problem

Postby fedekun on Fri Feb 04, 2011 2:28 am

Its completely frozen, I cant do anything. I have to turn it off manually...
fedekun
Level 1
Level 1
 
Posts: 4
Joined: Thu Feb 03, 2011 11:30 am

Re: Start up problem

Postby inktitan on Sat Feb 05, 2011 12:11 am

next time you get into the system can you give the read out for dmesg?
Proud hugger of Penguins.
Pentium D 2.8Ghz, 3 GB RAM, 1 GB Nvidia GT 240, Linux Mint Debian
“...not the strongest...survives, nor the most intelligent... It is...the [one] most adaptable to change.”~C.D.
Please do not post new topics in [solved] topics
User avatar
inktitan
Level 5
Level 5
 
Posts: 900
Joined: Wed Aug 18, 2010 10:51 pm
Location: Houston, Tx

Re: Start up problem

Postby fedekun on Sat Feb 05, 2011 2:13 am

Code: Select all
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f3f9000 (usable)
[    0.000000]  BIOS-e820: 000000007f3f9000 - 000000007f43f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f43f000 - 000000007f446000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f446000 - 000000007f449000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f449000 - 000000007f46d000 (reserved)
[    0.000000]  BIOS-e820: 000000007f46d000 - 000000007f46e000 (usable)
[    0.000000]  BIOS-e820: 000000007f46e000 - 000000007f478000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f478000 - 000000007f498000 (reserved)
[    0.000000]  BIOS-e820: 000000007f498000 - 000000007f49f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f49f000 - 000000007f600000 (usable)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.6 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F600000 mask 0FFF00000 write-through
[    0.000000]   2 base 07F700000 mask 0FFF00000 uncachable
[    0.000000]   3 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009d800 (usable)
[    0.000000]  modified: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f3f9000 (usable)
[    0.000000]  modified: 000000007f3f9000 - 000000007f43f000 (ACPI NVS)
[    0.000000]  modified: 000000007f43f000 - 000000007f446000 (ACPI data)
[    0.000000]  modified: 000000007f446000 - 000000007f449000 (ACPI NVS)
[    0.000000]  modified: 000000007f449000 - 000000007f46d000 (reserved)
[    0.000000]  modified: 000000007f46d000 - 000000007f46e000 (usable)
[    0.000000]  modified: 000000007f46e000 - 000000007f478000 (ACPI NVS)
[    0.000000]  modified: 000000007f478000 - 000000007f498000 (reserved)
[    0.000000]  modified: 000000007f498000 - 000000007f49f000 (ACPI NVS)
[    0.000000]  modified: 000000007f49f000 - 000000007f600000 (usable)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed00000 - 00000000fed01000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] found SMP MP-table at [c00fcac0] fcac0
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 3707c000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 009a5000 - 01918b12
[    0.000000] Move RAMDISK from 000000003707c000 - 0000000037fefb11 to 009a5000 - 01918b11
[    0.000000] ACPI: RSDP 000f0410 00024 (v03 ALASKA)
[    0.000000] ACPI: XSDT 7f43f078 00044 (v01 ALASKA   A M I  01072009 AMI  00010013)
[    0.000000] ACPI: FACP 7f445b38 000F4 (v04 ALASKA   A M I  01072009 AMI  00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100428/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0x7F474F40/0x000000007F474F80, using 32 (20100428/tbfadt-486)
[    0.000000] ACPI: DSDT 7f43f150 069E2 (v02 ALASKA   A M I  00000000 INTL 20051117)
[    0.000000] ACPI: FACS 7f474f40 00040
[    0.000000] ACPI: APIC 7f445c30 00062 (v01 ALASKA   A M I  01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 7f445c98 0003C (v01 A M I  ITL 945. 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 7f445cd8 00038 (v01 ALASKA   A M I  01072009 AMI. 00000003)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0007f3f9
[    0.000000]     0: 0x0007f46d -> 0x0007f46e
[    0.000000]     0: 0x0007f49f -> 0x0007f600
[    0.000000] On node 0 totalpages: 521448
[    0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c191a200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 291936 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7f600000 (gap: 7f600000:7f600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36416 r0 d20928 u2097152
[    0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517371
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=092da26c-f211-42d8-8533-149a51b50d68 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] early_res array is doubled to 128 at [16800 - 177ff]
[    0.000000] allocated 10434240 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Subtract (57 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000100000 - 00009a0adc]   TEXT DATA BSS
[    0.000000]   #3 [00009a1000 - 00009a41ea]             BRK
[    0.000000]   #4 [00000fcad0 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000fcac0 - 00000fcad0]    MP-table mpf
[    0.000000]   #6 [000009d800 - 00000fc8e0]   BIOS reserved
[    0.000000]   #7 [00000fca38 - 00000fcac0]   BIOS reserved
[    0.000000]   #8 [00000fc8e0 - 00000fca38]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #10 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #11 [0000015000 - 0000016000]         PGTABLE
[    0.000000]   #12 [00009a5000 - 0001919000]     NEW RAMDISK
[    0.000000]   #13 [0001919000 - 000191a000]         BOOTMEM
[    0.000000]   #14 [000191a000 - 000290a000]         BOOTMEM
[    0.000000]   #15 [000290a000 - 000290a004]         BOOTMEM
[    0.000000]   #16 [000290a040 - 000290a100]         BOOTMEM
[    0.000000]   #17 [000290a100 - 000290a154]         BOOTMEM
[    0.000000]   #18 [000290a180 - 000290d180]         BOOTMEM
[    0.000000]   #19 [000290d180 - 000290d1ec]         BOOTMEM
[    0.000000]   #20 [000290d200 - 0002913200]         BOOTMEM
[    0.000000]   #21 [0002913200 - 0002913225]         BOOTMEM
[    0.000000]   #22 [0002913240 - 0002913267]         BOOTMEM
[    0.000000]   #23 [0002913280 - 0002913494]         BOOTMEM
[    0.000000]   #24 [00029134c0 - 0002913500]         BOOTMEM
[    0.000000]   #25 [0002913500 - 0002913540]         BOOTMEM
[    0.000000]   #26 [0002913540 - 0002913580]         BOOTMEM
[    0.000000]   #27 [0002913580 - 00029135c0]         BOOTMEM
[    0.000000]   #28 [00029135c0 - 0002913600]         BOOTMEM
[    0.000000]   #29 [0002913600 - 0002913640]         BOOTMEM
[    0.000000]   #30 [0002913640 - 0002913680]         BOOTMEM
[    0.000000]   #31 [0002913680 - 00029136c0]         BOOTMEM
[    0.000000]   #32 [00029136c0 - 0002913700]         BOOTMEM
[    0.000000]   #33 [0002913700 - 0002913740]         BOOTMEM
[    0.000000]   #34 [0002913740 - 0002913780]         BOOTMEM
[    0.000000]   #35 [0002913780 - 00029137c0]         BOOTMEM
[    0.000000]   #36 [00029137c0 - 0002913800]         BOOTMEM
[    0.000000]   #37 [0002913800 - 0002913840]         BOOTMEM
[    0.000000]   #38 [0002913840 - 0002913880]         BOOTMEM
[    0.000000]   #39 [0002913880 - 00029138c0]         BOOTMEM
[    0.000000]   #40 [00029138c0 - 0002913900]         BOOTMEM
[    0.000000]   #41 [0002913900 - 0002913940]         BOOTMEM
[    0.000000]   #42 [0002913940 - 0002913950]         BOOTMEM
[    0.000000]   #43 [0002913980 - 00029139ea]         BOOTMEM
[    0.000000]   #44 [0002913a00 - 0002913a6a]         BOOTMEM
[    0.000000]   #45 [0002c00000 - 0002c0e000]         BOOTMEM
[    0.000000]   #46 [0002e00000 - 0002e0e000]         BOOTMEM
[    0.000000]   #47 [0002915a80 - 0002915a84]         BOOTMEM
[    0.000000]   #48 [0002915ac0 - 0002915ac4]         BOOTMEM
[    0.000000]   #49 [0002915b00 - 0002915b08]         BOOTMEM
[    0.000000]   #50 [0002915b40 - 0002915b48]         BOOTMEM
[    0.000000]   #51 [0002915b80 - 0002915c28]         BOOTMEM
[    0.000000]   #52 [0002915c40 - 0002915ca8]         BOOTMEM
[    0.000000]   #53 [0002915cc0 - 0002919cc0]         BOOTMEM
[    0.000000]   #54 [0002919cc0 - 0002999cc0]         BOOTMEM
[    0.000000]   #55 [0002999cc0 - 00029d9cc0]         BOOTMEM
[    0.000000]   #56 [0002e0e000 - 00038016c0]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f600)
[    0.000000] Memory: 2033636k/2086912k available (4928k kernel code, 52156k reserved, 2336k data, 684k init, 1176948k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0819000 - 0xc08c4000   ( 684 kB)
[    0.000000]       .data : 0xc05d029e - 0xc0818668   (2336 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05d029e   (4928 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU-based detection of stalled CPUs is disabled.
[    0.000000]    Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1666.705 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.41 BogoMIPS (lpj=6666820)
[    0.004020] pid_max: default: 32768 minimum: 301
[    0.004060] Security Framework initialized
[    0.004096] AppArmor: AppArmor initialized
[    0.004100] Yama: becoming mindful.
[    0.004215] Mount-cache hash table entries: 512
[    0.004446] Initializing cgroup subsys ns
[    0.004455] Initializing cgroup subsys cpuacct
[    0.004465] Initializing cgroup subsys memory
[    0.004482] Initializing cgroup subsys devices
[    0.004488] Initializing cgroup subsys freezer
[    0.004494] Initializing cgroup subsys net_cls
[    0.004540] CPU: Physical Processor ID: 0
[    0.004545] CPU: Processor Core ID: 0
[    0.004550] mce: CPU supports 5 MCE banks
[    0.004563] CPU0: Thermal monitoring enabled (TM2)
[    0.004571] using mwait in idle threads.
[    0.004583] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.004602] ... version:                3
[    0.004607] ... bit width:              40
[    0.004611] ... generic registers:      2
[    0.004616] ... value mask:             000000ffffffffff
[    0.004621] ... max period:             000000007fffffff
[    0.004626] ... fixed-purpose events:   3
[    0.004630] ... event mask:             0000000700000003
[    0.011858] ACPI: Core revision 20100428
[    0.024028] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.024039] ftrace: allocating 21758 entries in 43 pages
[    0.028101] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.069944] CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz stepping 0a
[    0.072000] Booting Node   0, Processors  #1 Ok.
[    0.008000] Initializing CPU#1
[    0.160030] Brought up 2 CPUs
[    0.160039] Total of 2 processors activated (6666.73 BogoMIPS).
[    0.160397] devtmpfs: initialized
[    0.162377] regulator: core version 0.5
[    0.162419] Time: 10:02:33  Date: 02/04/11
[    0.162497] NET: Registered protocol family 16
[    0.164137] Trying to unpack rootfs image as initramfs...
[    0.164177] EISA bus registered
[    0.164203] ACPI: bus type pci registered
[    0.164405] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.164416] PCI: not using MMCONFIG
[    0.185748] PCI: Using configuration type 1 for base access
[    0.189670] bio: create slab <bio-0> at 0
[    0.194003] ACPI: EC: Look up EC in DSDT
[    0.195533] ACPI: BIOS _OSI(Linux) query ignored
[    0.196119] ACPI: BIOS _OSI(Linux) query ignored
[    0.196688] ACPI: BIOS _OSI(Linux) query ignored
[    0.197229] ACPI Error: No handler for Region [EC__] (f701c5f0) [EmbeddedControl] (20100428/evregion-369)
[    0.197249] ACPI Error: Region EmbeddedControl(0x3) has no handler (20100428/exfldio-293)
[    0.197270] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC__._REG] (Node f701e2b8), AE_NOT_EXIST
[    0.199339] ACPI: Executed 1 blocks of module-level executable AML code
[    0.208833] ACPI: BIOS _OSI(Linux) query ignored
[    0.212032] ACPI: SSDT 7f46f918 00444 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.213561] ACPI: Dynamic OEM Table Load:
[    0.213573] ACPI: SSDT (null) 00444 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.214902] ACPI: BIOS _OSI(Linux) query ignored
[    0.215473] ACPI: BIOS _OSI(Linux) query ignored
[    0.216068] ACPI: BIOS _OSI(Linux) query ignored
[    0.217418] ACPI: Interpreter enabled
[    0.217418] ACPI: (supports S0 S1 S3 S4 S5)
[    0.217418] ACPI: Using IOAPIC for interrupt routing
[    0.217418] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.217418] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[    0.217418] PCI: Using MMCONFIG for extended config space
[    0.238166] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.238786] ACPI: No dock devices found.
[    0.238800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.239503] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.240032] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.240042] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.240052] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.240062] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xffffffff]
[    0.240168] pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
[    0.240180] pci 0000:00:02.0: reg 14: [io  0xf100-0xf107]
[    0.240192] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.240203] pci 0000:00:02.0: reg 1c: [mem 0xfe700000-0xfe7fffff]
[    0.240264] pci 0000:00:02.1: reg 10: [mem 0xfea00000-0xfea7ffff]
[    0.240419] pci 0000:00:1b.0: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    0.240512] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.240524] pci 0000:00:1b.0: PME# disabled
[    0.240666] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.240677] pci 0000:00:1c.0: PME# disabled
[    0.240824] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.240835] pci 0000:00:1c.3: PME# disabled
[    0.240933] pci 0000:00:1d.0: reg 20: [io  0xf0a0-0xf0bf]
[    0.241031] pci 0000:00:1d.1: reg 20: [io  0xf080-0xf09f]
[    0.241128] pci 0000:00:1d.2: reg 20: [io  0xf060-0xf07f]
[    0.241223] pci 0000:00:1d.3: reg 20: [io  0xf040-0xf05f]
[    0.241321] pci 0000:00:1d.7: reg 10: [mem 0xfeb05000-0xfeb053ff]
[    0.241414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.241425] pci 0000:00:1d.7: PME# disabled
[    0.241723] pci 0000:00:1f.2: reg 10: [io  0xf0f0-0xf0f7]
[    0.241738] pci 0000:00:1f.2: reg 14: [io  0xf0e0-0xf0e3]
[    0.241753] pci 0000:00:1f.2: reg 18: [io  0xf0d0-0xf0d7]
[    0.241768] pci 0000:00:1f.2: reg 1c: [io  0xf0c0-0xf0c3]
[    0.241783] pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
[    0.241798] pci 0000:00:1f.2: reg 24: [mem 0xfeb04000-0xfeb043ff]
[    0.241859] pci 0000:00:1f.2: PME# supported from D3hot
[    0.241869] pci 0000:00:1f.2: PME# disabled
[    0.241951] pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
[    0.242123] pci 0000:01:00.0: reg 10: [mem 0xfe900000-0xfe90ffff]
[    0.248062] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.248077] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.248091] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.248108] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.248255] pci 0000:02:00.0: reg 10: [io  0xe000-0xe0ff]
[    0.248293] pci 0000:02:00.0: reg 18: [mem 0xe0010000-0xe0010fff 64bit pref]
[    0.248321] pci 0000:02:00.0: reg 20: [mem 0xe0000000-0xe000ffff 64bit pref]
[    0.248339] pci 0000:02:00.0: reg 30: [mem 0xfe800000-0xfe81ffff pref]
[    0.248413] pci 0000:02:00.0: supports D1 D2
[    0.248421] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.248433] pci 0000:02:00.0: PME# disabled
[    0.256060] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.256077] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.256089] pci 0000:00:1c.3:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.256106] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.256236] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.256250] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.256264] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.256280] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.256291] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.256299] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.256308] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.256318] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
[    0.256354] pci_bus 0000:00: on NUMA node 0
[    0.256374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.256689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.256883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.257148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.286736] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.287044] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.287365] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.287670] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.287993] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.288318] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.288627] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.288946] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.289098] HEST: Table is not found!
[    0.289349] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.289378] vgaarb: loaded
[    0.289930] SCSI subsystem initialized
[    0.290177] libata version 3.00 loaded.
[    0.290378] usbcore: registered new interface driver usbfs
[    0.290432] usbcore: registered new interface driver hub
[    0.290517] usbcore: registered new device driver usb
[    0.291944] ACPI: WMI: Mapper loaded
[    0.291951] PCI: Using ACPI for IRQ routing
[    0.291960] PCI: pci_cache_line_size set to 64 bytes
[    0.292122] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[    0.292131] reserve RAM buffer: 000000007f3f9000 - 000000007fffffff
[    0.292144] reserve RAM buffer: 000000007f46e000 - 000000007fffffff
[    0.292154] reserve RAM buffer: 000000007f600000 - 000000007fffffff
[    0.292451] NetLabel: Initializing
[    0.292458] NetLabel:  domain hash size = 128
[    0.292463] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.292498] NetLabel:  unlabeled traffic allowed by default
[    0.292617] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.292632] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.292647] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.300078] Switching to clocksource tsc
[    0.327240] AppArmor: AppArmor Filesystem Enabled
[    0.327275] pnp: PnP ACPI init
[    0.327318] ACPI: bus type pnp registered
[    0.332576] pnp: PnP ACPI: found 12 devices
[    0.332585] ACPI: ACPI bus type pnp unregistered
[    0.332595] PnPBIOS: Disabled by ACPI PNP
[    0.332633] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.332643] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.332674] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.332683] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.332694] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.332704] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.332714] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.332724] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.332733] system 00:03: [mem 0xfff00000-0xffffffff] has been reserved
[    0.332755] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.373017] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.373031] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.373041] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.373050] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.373064] pci 0000:00:1c.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.373076] pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.373092] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[    0.373101] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.373115] pci 0000:00:1c.3:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.373127] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.373143] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.373149] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.373161] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.373171] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.373206]   alloc irq_desc for 16 on node -1
[    0.373213]   alloc kstat_irqs on node -1
[    0.373230] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.373242] pci 0000:00:1c.0: setting latency timer to 64
[    0.373265]   alloc irq_desc for 19 on node -1
[    0.373271]   alloc kstat_irqs on node -1
[    0.373284] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.373297] pci 0000:00:1c.3: setting latency timer to 64
[    0.373317] pci 0000:00:1e.0: setting latency timer to 64
[    0.373329] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.373337] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.373345] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.373354] pci_bus 0000:00: resource 7 [mem 0x7f700000-0xffffffff]
[    0.373362] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.373370] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.373379] pci_bus 0000:01: resource 2 [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.373388] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.373396] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.373404] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[    0.373414] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.373422] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.373430] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.373438] pci_bus 0000:03: resource 7 [mem 0x7f700000-0xffffffff]
[    0.373543] NET: Registered protocol family 2
[    0.373720] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.374540] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.375617] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.376223] TCP: Hash tables configured (established 131072 bind 65536)
[    0.376235] TCP reno registered
[    0.376256] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.376284] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.376570] NET: Registered protocol family 1
[    0.376616] pci 0000:00:02.0: Boot video device
[    0.403786] PCI: CLS 64 bytes, default 64
[    0.404400] cpufreq-nforce2: No nForce2 chipset.
[    0.404516] Scanning for low memory corruption every 60 seconds
[    0.404880] audit: initializing netlink socket (disabled)
[    0.404907] type=2000 audit(1296813753.400:1): initialized
[    0.427821] highmem bounce pool size: 64 pages
[    0.427837] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.432996] VFS: Disk quotas dquot_6.5.2
[    0.433209] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.435323] fuse init (API version 7.14)
[    0.435649] msgmni has been set to 1673
[    0.436572] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.436582] io scheduler noop registered
[    0.436588] io scheduler deadline registered
[    0.436641] io scheduler cfq registered (default)
[    0.436945] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.437016]   alloc irq_desc for 40 on node -1
[    0.437022]   alloc kstat_irqs on node -1
[    0.437047] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.437316] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.437382]   alloc irq_desc for 41 on node -1
[    0.437388]   alloc kstat_irqs on node -1
[    0.437407] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[    0.437721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.438442] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 1462 ss_did 1031
[    0.438551] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    0.438591] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 1462 ss_did 1031
[    0.438680] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.438712] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.439043] intel_idle: MWAIT substates: 0x20220
[    0.439050] intel_idle: v0.4 model 0x1C
[    0.439055] intel_idle: lapic_timer_reliable_states 0x6
[    0.439073] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.439352] Switching to clocksource hpet
[    0.440084] ACPI: AC Adapter [ADP1] (on-line)
[    0.440319] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0
[    0.440798] ACPI: Lid Switch [LID0]
[    0.440968] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0E:00/input/input1
[    0.440984] ACPI: Sleep Button [SLPB]
[    0.441147] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.441159] ACPI: Power Button [PWRB]
[    0.441312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.441324] ACPI: Power Button [PWRF]
[    0.441881] ACPI: acpi_idle yielding to intel_idle
[    0.450316] thermal LNXTHERM:01: registered as thermal_zone0
[    0.450342] ACPI: Thermal Zone [THRM] (65 C)
[    0.450595] ERST: Table is not found!
[    0.451391] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.456161] brd: module loaded
[    0.458110] loop: module loaded
[    0.460021] Fixed MDIO Bus: probed
[    0.460164] PPP generic driver version 2.4.2
[    0.460325] tun: Universal TUN/TAP device driver, 1.6
[    0.460332] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.460585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.460641]   alloc irq_desc for 23 on node -1
[    0.460647]   alloc kstat_irqs on node -1
[    0.460665] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.460703] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.460713] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.460828] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.460881] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.460906] ehci_hcd 0000:00:1d.7: debug port 1
[    0.462108] ACPI: Battery Slot [BAT1] (battery absent)
[    0.462150] isapnp: Scanning for PnP cards...
[    0.464814] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.464911] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[    0.481385] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.481776] hub 1-0:1.0: USB hub found
[    0.481791] hub 1-0:1.0: 8 ports detected
[    0.481997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.482046] uhci_hcd: USB Universal Host Controller Interface driver
[    0.482120] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.482139] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.482148] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.482258] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.482307] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f0a0
[    0.482661] hub 2-0:1.0: USB hub found
[    0.482675] hub 2-0:1.0: 2 ports detected
[    0.482816] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.482833] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.482841] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.482940] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.483016] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f080
[    0.483375] hub 3-0:1.0: USB hub found
[    0.483388] hub 3-0:1.0: 2 ports detected
[    0.483530]   alloc irq_desc for 18 on node -1
[    0.483537]   alloc kstat_irqs on node -1
[    0.483551] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.483566] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.483575] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.483678] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.483740] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f060
[    0.484096] hub 4-0:1.0: USB hub found
[    0.484109] hub 4-0:1.0: 2 ports detected
[    0.484260] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.484276] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.484285] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.484397] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.484460] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f040
[    0.484810] hub 5-0:1.0: USB hub found
[    0.484822] hub 5-0:1.0: 2 ports detected
[    0.485167] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.524589] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.524610] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.524985] mice: PS/2 mouse device common for all mice
[    0.525692] rtc_cmos 00:05: RTC can wake from S4
[    0.525802] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.525849] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.526192] device-mapper: uevent: version 1.0.3
[    0.545665] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.558323] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.573324] device-mapper: multipath: version 1.1.1 loaded
[    0.573338] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.582226] EISA: Probing bus 0 at eisa.0
[    0.582236] EISA: Cannot allocate resource for mainboard
[    0.582245] Cannot allocate resource for EISA slot 1
[    0.582252] Cannot allocate resource for EISA slot 2
[    0.582260] Cannot allocate resource for EISA slot 3
[    0.582267] Cannot allocate resource for EISA slot 4
[    0.582275] Cannot allocate resource for EISA slot 5
[    0.582282] Cannot allocate resource for EISA slot 6
[    0.582289] Cannot allocate resource for EISA slot 7
[    0.582297] Cannot allocate resource for EISA slot 8
[    0.582302] EISA: Detected 0 cards.
[    0.594040] cpuidle: using governor ladder
[    0.594427] cpuidle: using governor menu
[    0.595257] TCP cubic registered
[    0.595684] NET: Registered protocol family 10
[    0.596687] lo: Disabled Privacy Extensions
[    0.597336] NET: Registered protocol family 17
[    0.599541] Using IPI No-Shortcut mode
[    0.599833] PM: Resume from disk failed.
[    0.599860] registered taskstats version 1
[    0.600350]   Magic number: 15:294:21
[    0.600482] rtc_cmos 00:05: setting system clock to 2011-02-04 10:02:34 UTC (1296813754)
[    0.600491] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.600496] EDD information not available.
[    0.817636] isapnp: No Plug & Play device found
[    0.980099] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    1.091535] Freeing initrd memory: 15824k freed
[    1.104365] Freeing unused kernel memory: 684k freed
[    1.105125] Write protecting the kernel text: 4932k
[    1.105199] Write protecting the kernel read-only data: 1976k
[    1.147158] udev[80]: starting version 163
[    1.500290] Linux agpgart interface v0.103
[    1.512211] usbcore: registered new interface driver hiddev
[    1.528463] input: Genius USB LaserStream(TM) Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[    1.528805] generic-usb 0003:0458:012B.0001: input,hidraw0: USB HID v1.11 Mouse [Genius USB LaserStream(TM) Mouse] on usb-0000:00:1d.0-2/input0
[    1.528870] usbcore: registered new interface driver usbhid
[    1.528877] usbhid: USB HID core driver
[    1.544845] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.544896] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.544971] r8169 0000:02:00.0: setting latency timer to 64
[    1.545046]   alloc irq_desc for 42 on node -1
[    1.545053]   alloc kstat_irqs on node -1
[    1.545081] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    1.546600] r8169 0000:02:00.0: eth0: RTL8102e at 0xf8180000, 40:61:86:b0:46:62, XID 04c00000 IRQ 42
[    1.573951] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.575061] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    1.616438] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.616955] ahci 0000:00:1f.2: version 3.0
[    1.616991] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.617075]   alloc irq_desc for 43 on node -1
[    1.617083]   alloc kstat_irqs on node -1
[    1.617107] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.617264] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.617276] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    1.617289] ahci 0000:00:1f.2: setting latency timer to 64
[    1.628359] scsi0 : ahci
[    1.655413] scsi1 : ahci
[    1.670503] scsi2 : ahci
[    1.670963] scsi3 : ahci
[    1.671436] ata1: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04100 irq 43
[    1.671448] ata2: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04180 irq 43
[    1.671458] ata3: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04200 irq 43
[    1.671467] ata4: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04280 irq 43
[    1.710687] [drm] Initialized drm 1.1.0 20060810
[    1.992150] ata2: SATA link down (SStatus 0 SControl 300)
[    1.992187] ata3: SATA link down (SStatus 0 SControl 300)
[    1.992222] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.992258] ata4: SATA link down (SStatus 0 SControl 300)
[    1.993324] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
[    1.993340] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.994701] ata1.00: configured for UDMA/133
[    2.008409] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[    2.008916] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.009241] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.009400] sd 0:0:0:0: [sda] Write Protect is off
[    2.009408] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.009475] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.009865]  sda: sda1 sda2 < sda5 >
[    2.058767] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.136495] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.136506] i915 0000:00:02.0: setting latency timer to 64
[    2.196507]   alloc irq_desc for 44 on node -1
[    2.196517]   alloc kstat_irqs on node -1
[    2.196538] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    2.196562] [drm] set up 7M of stolen space
[    2.303577] composite sync not supported
[    2.303812] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.304219] [drm] initialized overlay support
[    2.616132] Skipping EDID probe due to cached edid
[    3.066890] Console: switching to colour frame buffer device 128x37
[    3.073513] fb0: inteldrmfb frame buffer device
[    3.073518] drm: registered panic notifier
[    3.073526] Slow work thread pool: Starting up
[    3.073657] Slow work thread pool: Ready
[    3.579418] acpi device:1f: registered as cooling_device2
[    3.580623] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    3.580799] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.580864] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.896139] Skipping EDID probe due to cached edid
[    4.130107] Btrfs loaded
[    4.142012] xor: automatically using best checksumming function: pIII_sse
[    4.160020]    pIII_sse  :  5066.000 MB/sec
[    4.160030] xor: using function: pIII_sse (5066.000 MB/sec)
[    4.167790] device-mapper: dm-raid45: initialized v0.2594b
[    4.431666] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    4.431676] EXT4-fs (sda1): write access will be enabled during recovery
[    4.620793] EXT4-fs (sda1): recovery complete
[    4.621186] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   16.927861] Adding 6142972k swap on /dev/sda5.  Priority:-1 extents:1 across:6142972k
[   16.998873] udev[425]: starting version 163
[   17.243609] lp: driver loaded but no devices found
[   17.696603] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.958088] msi-laptop: Identified laptop model 'MSI N014'.
[   17.958099] MSI: Brightness ignored, must be controlled by ACPI video driver
[   17.959883] cfg80211: Calling CRDA to update world regulatory domain
[   18.063673] cfg80211: World regulatory domain updated:
[   18.063684]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.063695]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.063704]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.063714]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.063723]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.063733]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.486923] rt2800pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.486938] rt2800pci 0000:01:00.0: setting latency timer to 64
[   18.635381] phy0: Selected rate control algorithm 'minstrel'
[   18.637142] Registered led device: rt2800pci-phy0::radio
[   18.637204] Registered led device: rt2800pci-phy0::assoc
[   18.637272] Registered led device: rt2800pci-phy0::quality
[   18.639125] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[   18.827932] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
[   18.912212] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   18.928779] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.928891]   alloc irq_desc for 45 on node -1
[   18.928899]   alloc kstat_irqs on node -1
[   18.928925] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   18.928999] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   18.965083] msi-laptop: driver 0.5 successfully loaded.
[   19.050750] r8169 0000:02:00.0: eth0: link down
[   19.051427] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.150951] hda_codec: ALC662 rev1: BIOS auto-probing.
[   19.391826] ppdev: user-space parallel port driver
[   19.444371] Skipping EDID probe due to cached edid
[   19.476215] Skipping EDID probe due to cached edid


There it is.
fedekun
Level 1
Level 1
 
Posts: 4
Joined: Thu Feb 03, 2011 11:30 am

Re: Start up problem

Postby inktitan on Sat Feb 05, 2011 10:58 pm

Ok I think I bit off more than I can chew with dmesg. Let me see inxi -F and lsmod. The first will show your system specs and the second will show the modules associated. Then I can rule out graphics card compatibility issues.
Proud hugger of Penguins.
Pentium D 2.8Ghz, 3 GB RAM, 1 GB Nvidia GT 240, Linux Mint Debian
“...not the strongest...survives, nor the most intelligent... It is...the [one] most adaptable to change.”~C.D.
Please do not post new topics in [solved] topics
User avatar
inktitan
Level 5
Level 5
 
Posts: 900
Joined: Wed Aug 18, 2010 10:51 pm
Location: Houston, Tx


Return to Newbie Questions

Who is online

Users browsing this forum: No registered users and 6 guests