no sound lmde

[houndhen]

Got lmde installed and running. Started to use it and find I have no sound. I did the fix listed http://forums.linuxmint.com/viewtopic.php?f=141&t=58616 and http://forums.linuxmint.com/viewtopic.php?f=42&t=60485 and rebooted each time. I still find that I have no sound. After doing the second fix and adding volume control to panel, i right clicked and opened volume control to check the sliders to see if they were bottomed out. For devices I have HDA Intel (Alsa Mixer) and Realtek ALC888 (OSS Mixer). Neither device gives me any sound.

[libssd]

Have you applied all the latest LMDE updates? When I first installed LMDE a couple of months ago, no sound on an Acer AA1 D150. Since LMDE is my experimental OS, I didn't fret much about it. I just checked again, after updating yesterday to all the latest, and sound works now, without my making any sound configuration changes.

If you have all the latest updates in place, a detailed description of your hardware may help.

[houndhen]

If you have all the latest updates in place, a detailed description of your hardware may help.

Yes I have all the latest updates in place. Even the mintdesktop has been updated. Here is the output for the command lshw:

Code: Select all

md-desktop
    description: Desktop Computer
    product: To Be Filled By O.E.M.
    vendor: To Be Filled By O.E.M.
    version: To Be Filled By O.E.M.
    serial: To Be Filled By O.E.M.
    width: 32 bits
    capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
    configuration: boot=normal chassis=desktop cpus=2 uuid=00020003-0004-0005-0006-000700080009
  *-core
       description: Motherboard
       product: ConRoe1333-D667
       physical id: 0
     *-firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: P1.20 (06/28/2007)
          size: 64KiB
          capacity: 448KiB
          capabilities: pci pnp upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot
     *-cpu:0
          description: CPU
          product: Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz
          vendor: Intel Corp.
          physical id: 4
          bus info: cpu@0
          version: 6.15.11
          serial: 0000-06FB-0000-0000-0000-0000
          slot: CPUSocket
          size: 2999MHz
          capacity: 2999MHz
          width: 64 bits
          clock: 333MHz
        *-memory
          description: System Memory
          physical id: e
          slot: System board or motherboard
          size: 2GiB
       *-pci
          description: Host bridge
          product: 82945G/GZ/P/PL Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel
          resources: irq:0
        *-display
             description: VGA compatible controller
             product: 82945G/GZ Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:16 memory:fea80000-feafffff ioport:dc00(size=8) memory:d0000000-dfffffff(prefetchable) memory:fea40000-fea7ffff
        *-multimedia
             description: Audio device
             product: N10/ICH 7 Family High Definition Audio Controller
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 01
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi pciexpress bus_master cap_list
             configuration: driver=HDA Intel latency=0
             resources: irq:16 memory:fea38000-fea3bfff
        *-pci:0
             description: PCI bridge
             product: N10/ICH 7 Family PCI Express Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:24 ioport:1000(size=4096) memory:80000000-803fffff ioport:fdf00000(size=1048576)
        *-pci:1
             description: PCI bridge
             product: N10/ICH 7 Family PCI Express Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:25 ioport:e000(size=4096) memory:feb00000-febfffff memory:80400000-805fffff(prefetchable)

This probably is more than is needed. I deleted quite a bit of it. Don't know if this tells what is needed or not.

after edit:
I forgot to say that lmde is an experimental distro for me also. I was going to start using it for my main distro but have now reverted back. I will keep it updated; maybe the sound problem will be solved soon.