cinnamon wont load

Please post suggestions for improvement of Cinnamon here
https://github.com/linuxmint/Cinnamon

cinnamon wont load

Postby bootdoc on Thu Jun 21, 2012 9:51 am

after trying to get the nvidia driver to work (it doesn't) cinnamon nolonger loads. I am stuck with gnome desktop with panels top and bottom which cant be edited and resolution on one screen set at 1024x768. i removed the nvidia driver and still cannot load cinnamon desktop. I thought maybe i could delete the /etc/X11/xorg.conf file and restart X but there is no xorg.conf file. I only found xorg.conf.failsafe. any ideas how to fix this issue?

Thanks
bootdoc
Level 1
Level 1
 
Posts: 35
Joined: Mon Apr 12, 2010 10:22 am

Linux Mint is funded by ads and donations.
 

Re: cinnamon wont load

Postby Therion87 on Thu Jun 21, 2012 10:55 am

How did you install the nividia drivers? With Jockey? Or with Synaptic or the command line? The nvidia drivers probably didn't work becasue nvidia-xconfig wasn't ran after installing the nvidia drivers. Reinstall them from the command prompt after start up. "sudo apt-get update && sudo apt-get install nvidia-current nvidia-settings" then "sudo nvidia-xconfig" and reboot
Processor: i7-2860QM
Memory: 16 GB DDR3 @ 1600MHz
Graphics: Nvidia 560M 1.5GB - 313.18
Operating System: Linux Mint 13 Maya
HDD: 120 GB SSD & 500 GB HDD
Kernel: 3.9
User avatar
Therion87
Level 2
Level 2
 
Posts: 62
Joined: Thu Apr 07, 2011 4:07 pm
Location: Youngstown, OH

Re: cinnamon wont load

Postby bootdoc on Thu Jun 21, 2012 6:17 pm

i used the additional drivers utility in system settings. has always worked before. m trying your method now.
bootdoc
Level 1
Level 1
 
Posts: 35
Joined: Mon Apr 12, 2010 10:22 am

Re: cinnamon wont load

Postby bootdoc on Thu Jun 21, 2012 6:26 pm

well that didnt work. now have resolution of 640x480 and cant change it!
using the additional drivers utility again to if that works
bootdoc
Level 1
Level 1
 
Posts: 35
Joined: Mon Apr 12, 2010 10:22 am

Re: cinnamon wont load

Postby bootdoc on Thu Jun 21, 2012 6:35 pm

ok, so after running the additional drivers utility to install nvidia driver i have one monitor up with the correct resolution. i get this error message after login:

none of the selected modes were compatible with the possible modes:
Trying modes for CRTC 434
CRTC 434: trying mode 1024x768@50Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 1024x768@51Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 1024x768@52Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 832x624@53Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 800x600@54Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 800x600@55Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 800x600@56Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 800x600@57Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 720x450@58Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 680x384@59Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 680x384@60Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 640x480@61Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 640x480@62Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 640x480@63Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 640x480@64Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 640x480@65Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 640x480@66Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 576x432@67Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 512x384@68Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 512x384@69Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 512x384@70Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 416x312@71Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 400x300@72Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 400x300@73Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 400x300@74Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 400x300@75Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 320x240@76Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 320x240@77Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 320x240@78Hz with output at 1440x900@60Hz (pass 0)
CRTC 434: trying mode 1024x768@50Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 1024x768@51Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 1024x768@52Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 832x624@53Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 800x600@54Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 800x600@55Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 800x600@56Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 800x600@57Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 720x450@58Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 680x384@59Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 680x384@60Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 640x480@61Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 640x480@62Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 640x480@63Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 640x480@64Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 640x480@65Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 640x480@66Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 576x432@67Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 512x384@68Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 512x384@69Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 512x384@70Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 416x312@71Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 400x300@72Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 400x300@73Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 400x300@74Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 400x300@75Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 320x240@76Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 320x240@77Hz with output at 1440x900@60Hz (pass 1)
CRTC 434: trying mode 320x240@78Hz with output at 1440x900@60Hz (pass 1)

so now im gonna use the nvidia settings to try to get the other monitor up. let u know how it goes
bootdoc
Level 1
Level 1
 
Posts: 35
Joined: Mon Apr 12, 2010 10:22 am

Re: cinnamon wont load

Postby bootdoc on Thu Jun 21, 2012 6:39 pm

used the nvidia xserver setting to enable the 2nd monitor (twin view) absolute. Made the 1st monitor left of.. and all the icons are visible on the panel and in the main menu!! :D Why it didnt work previously I have no idea. But i am afraid to reboot. i know it get all screwed up if i do that.
bootdoc
Level 1
Level 1
 
Posts: 35
Joined: Mon Apr 12, 2010 10:22 am


Return to Cinnamon

Who is online

Users browsing this forum: No registered users and 9 guests