Conky Showoff thread

Forum rules
Before you post please read this

Re: Conky Showoff thread

Postby NM5TF on Sun Jul 20, 2014 3:34 pm

bjorntj wrote:
NM5TF wrote:my latest version using VinDSL's conky template & Paramvir's conkywx weather template


tommy


This looks quite good, are you willing to share your config? :)


BTJ


of course I'm willing to share...but, it uses a set of MANY templates that would take too much room
here to list them.. :(

you are advised to download conkywx from here:

Code: Select all
https://bitbucket.org/plikhari/conkywx_pub/downloads/conkywx_2.0.0-1_all.deb


and then go here to be able to set the parameters for YOUR location, and to see all the variables you can use:

Code: Select all
https://bitbucket.org/plikhari/conkywx_pub/wiki/Home


if you need more help, therre is a great thread on the Ubuntu forums here:

Code: Select all
http://ubuntuforums.org/showthread.php?t=1771033


be advised this is a VERY LONG thread that is now up to 1800 posts....you can skip most
of the first several pages as they are pretty old now....and the good news is that both authors
of the templates are regular visitors to that thread & are willing to help anyone...

or if you prefer, send me a PM or email

tommy
Linux Mint 17 rc, Ubuntu 12.04.5 LTS, Ubuntu 14.04.1 LTS, Debian 7.6 Wheezy, Fedora 20
Registered Linux User # 529389
my new & improved web page http://users.gilanet.com/~tfrost
User avatar
NM5TF
Level 1
Level 1
 
Posts: 45
Joined: Sat Feb 16, 2013 10:10 pm
Location: Magdalena, New Mexico

Linux Mint is funded by ads and donations.
 

Re: Conky Showoff thread

Postby aqmint on Thu Aug 14, 2014 9:18 am

virusdunil wrote:conky show off ?...well...heres mine...enjoy...(its based on fenouille) :wink:

Installed:conky manager...lm sensors,vnstat

its a full screen 3 file conky

the left conky

Code: Select all
# temps pour fermer conky en seconde. 0 = toujours actif
total_run_times 0

# affiche le texte sur la sortie standard
out_to_console no

# réglage de la mémoire, pour éviter le clignotement
double_buffer yes
# Soustraire les mémoires tampons de la mémoire utiliser
no_buffers yes
text_buffer_size 1024

# taux de rafraichissement de la fenêtre (en secondes)
update_interval 1

# nombre d'échantillons à utiliser pour calculer la moyenne d'utilisation
cpu_avg_samples 1
net_avg_samples 1

# taille et positon - largeur/hauteur
alignment top_left
minimum_size 325 500
maximum_width 300

# écart avec le bord x=gauche ou droit y= haut ou bas
gap_x 50
gap_y 15

# afficher les ombres
draw_shades no
# afficher des contours
draw_outline no
# contours autour des blocs de texte
draw_borders no
# largeur du contour
border_width 0
# largeur des marges
border_margin 0
# dessiner les contours des graphiques?
draw_graph_borders no

own_window_argb_visual yes

own_window_type desktop
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Utiliser Xft (polices lissées etc)
use_xft yes
xftalpha .1
override_utf8_locale yes # force UTF8

#police a utiliser : use_xft doit être a "yes"
xftfont saxMono:size=9 #OCR A Std:size=6
# Tout le texte en majuscule
uppercase no

# Ajoute des espaces après certains objets pour éviter de les faire bouger.
# Fonctionne uniquement avec les polices Fixes
use_spacer yes

# Taille des pointillés
stippled_borders 5

# Couleurs
default_color FFFFFF #blanc
default_shade_color 333333
default_outline_color black

color3 0077ff #rouge
color2 66FF00 #vert
color1 0077ff #bleu

${font Visitor TT1 BRK : pixelsize=12
}${color1}${alignc}${exec cat /etc/lsb-release | grep "NAME" | cut -d "=" -f2} Inside${font}

own_window_argb_visual yes
own_window_argb_value 0
own_window_colour 000000
TEXT



${font Visitor TT1 BRK : pixelsize=12}${color1}SYSTEME${alignr}${exec cat /etc/lsb-release | grep "DES" | cut -d "=" -f2 | sed 's/"//g' | sed 's/ /_/g'}${font}
VERSION CONKY ${alignr}${conky_version}
${color red}${voffset -5}${hr}
${color1}UTILISATION SANS REBOOT SYSTEME : ${color2}${uptime}
${color1}KERNEL  : ${sysname} ${color2}${kernel}
${color1}PORTABLE: ${color2}${nodename} ${machine}
${color1}MISE A JOUR DISPONIBLE DU SYSTEME : ${color RED}${execi 60 aptitude search "~U" | wc -l | tail}

${font Visitor TT1 BRK : pixelsize=12}${color1}TEMPERATURES${font}
${color red}${voffset -5}${hr}
${color1}TEMPERATURE DISQUE DUR: ${color red}${hwmon temp 1}°C
${color #0077ff}BATTERIE ${color red}${exec sensors | grep 'temp7'}
${color1}TEMPERATURES DES PROCESSEURS
${execi 1 sensors -A | grep 'Core' | cut -c1-20}

${color #0077ff}VENTILATION ${color2}${exec sensors | grep 'RPM'| cut -c1-26}


${font Visitor TT1 BRK : pixelsize=12}${color1}ACTIVITE DES PROCESSEURS
${color red}${voffset -5}${hr}
${offset 15}${color1}CPU 1 : ${freq_g 1} GHz - ${color3}${cpu cpu1}% ${color1}${cpubar cpu1}
${offset 15}${cpugraph cpu1 40,285 0000BF 0066FF -t}
${offset 15}CPU 2 : ${freq_g 2} GHz - ${color3}${cpu cpu2}% ${color1}${cpubar cpu2}
${offset 15}${cpugraph cpu2 40,285 0000BF 0066FF -t}

${font Visitor TT1 BRK : pixelsize=12}${color1}ACTIVITEE DE LA MEMOIRE${font}
${color red}${voffset -5}${hr}}
${offset 15}${color1}RAM : $mem / $memmax -  ${color2}$memperc% ${color2}
${color1}${membar 20,255 0000BF 66FF00 -t}

${font Visitor TT1 BRK : pixelsize=12}${color1}ACTIVITE DU DISQUE DUR${font}
${color red}${voffset -5}${hr}
${color1}Disk I/O $alignr ${diskio}
${diskiograph 30,000 0000BF 66FF00 -t}







the center conky
Code: Select all
# temps pour fermer conky en seconde. 0 = toujours actif
total_run_times 0

# affiche le texte sur la sortie standard
out_to_console no

# réglage de la mémoire, pour éviter le clignotement
double_buffer yes
# Soustraire les mémoires tampons de la mémoire utiliser
no_buffers yes
text_buffer_size 1024

# taux de rafraichissement de la fenêtre (en secondes)
update_interval 1

# nombre d'échantillons à utiliser pour calculer la moyenne d'utilisation
cpu_avg_samples 4
net_avg_samples 2

# taille et positon - largeur/hauteur
alignment top_left
minimum_size 350 300
maximum_width 350

# écart avec le bord x=gauche ou droit y= haut ou bas
gap_x 400
gap_y 200

# afficher les ombres
draw_shades no
# afficher des contours
draw_outline no
# contours autour des blocs de texte
draw_borders no
# largeur du contour
border_width 4
# largeur des marges
border_margin 3
# dessiner les contours des graphiques?
draw_graph_borders no

own_window_argb_visual no
own_window_type desktop
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Utiliser Xft (polices lissées etc)
use_xft yes
xftalpha .1
override_utf8_locale yes # force UTF8

#police a utiliser : use_xft doit être a "yes"
xftfont saxMono:size=9 #OCR A Std:size=6
# Tout le texte en majuscule
uppercase no

# Taille des pointillés
stippled_borders 5

# Ajoute des espaces après certains objets pour éviter de les faire bouger.
# Fonctionne uniquement avec les polices Fixes
use_spacer yes

# Couleurs
default_color FFFFFF #blanc
default_shade_color 333333
default_outline_color black

color3 0077ff #rouge
color2 66FF00 #vert
color1 0077ff #bleu

${color1}XPCox : ${color1}${exec /home/math/Script/VM | grep "%"} OQP - ${color3}${exec /home/math/Script/VM | grep "Mo"} ${color2}libre

own_window_argb_visual yes
own_window_colour EEEEEC
own_window_argb_value 0
TEXT


${font Visitor TT1 BRK : pixelsize=12}${color1}SYSTEME DE FICHIERS${font}
${color red}${voffset -5}${hr}
${color #0077ff}ENTROPY ${color2}${entropy_avail}${color #0077ff}/${color2}${entropy_poolsize}       ${color1}${entropy_bar}
${color #0077ff}ESPACE UTILISE ${color2}${fs_used /home/} ${color1}${fs_bar 10,00 /home}
${color #0077ff}ESPACE LIBRE HOME ${color2}${fs_free_perc /home}% ${fs_free /home} ${color1}${fs_bar_free /home}

${if_existing /proc/net/route wlan0}${font Visitor TT1 BRK : pixelsize=12}${color1}INFOS RESEAUX ${font}
${color red}${voffset -5}${hr}
${offset 15}${color RED}I.P Cogeco:${alignr}${execi 3600 wget -O - http://ip.tupeux.com | tail}
${offset 15}${color2}I.P ROUTEUR:${alignr}${gw_ip}
${color #0077ff}SSID DU RESEAU: ${color2}${wireless_essid wlan0} ${wireless_link_qual_perc wlan0}%
${color #0077ff}QUALITÉ SU SIGNAL WIFI:${color2} ${wireless_link_qual wlan0}/ 70
${color1}${wireless_link_bar 15,00 wlan0}

${font Visitor TT1 BRK : pixelsize=12}${color1}TRANFERTS${font}
${color red}${voffset -5}${hr}
${offset 15}${color1}Upload : ${color3}${upspeed wlan0}ko/s${alignr}${totalup wlan0}
${offset 15}${color1}${upspeedgraph wlan0 30,000 176e88 66FF00}
${offset 15}Download : ${color3}${downspeed wlan0}ko/s${alignr}${totaldown wlan0}
${offset 15}${color1}${downspeedgraph wlan0 30,000 176e88 66FF00}

TOTAL DES TRANSFERTS
${color red}${voffset -5}${hr}

${color1}AUJOURDHUI
${color2}Download   Upload             Total
${color1}${execi 300 vnstat | grep "today" | awk '{print $2 $3}'}\
${goto 90}${execi 300 vnstat | grep "today" | awk '{print $5 $6}'}\
${goto 190}${execi 300 vnstat | grep "today" | awk '{print $8 $9}'}

HIER:
${color2}Download   Upload             Total
${color1}${execi 300 vnstat | grep "yesterday" | awk '{print $2 $3}'}\
${goto 90}${execi 300 vnstat | grep "yesterday" | awk '{print $5 $6}'}\
${goto 190}${execi 300 vnstat | grep "yesterday" | awk '{print $8 $9}'}

LA SEMAINE PASSEE:
${color2}Download   Upload             Total
${color1}${execi 300 vnstat -w | grep "current week" | awk '{print $3 $4}'}\
${goto 90}${execi 300 vnstat -w | grep "current week" | awk '{print $6 $7}'}\
${goto 190}${execi 300 vnstat -w | grep "current week" | awk '{print $9 $10}'}

LE MOIS PASSE:
${color2}Download   Upload             Total
${color1}${execi 300 vnstat -m | grep "`date +"%b '%y"`" | awk '{print $3 $4}'}\
${goto 90}${execi 300 vnstat -m | grep "`date +"%b '%y"`" | awk '{print $6 $7}'}\
${goto 190}${execi 300 vnstat -m | grep "`date +"%b '%y"`" | awk '{print $9 $10}'}${font}
${color red}${voffset -5}${hr}
${color #0077ff}${alignc}BATERIE DU PORTABLE,${color3}ETAT ACTUEL
${color1}${battery_bar 10,000 BAT1}
${color #0077ff}ESTIMATION DU TEMPS RESTANT D'UTILISATIONT: ${color2}${battery_time BAT1}       
${alignC}${color1}STATUT: ${color red}$battery ${battery BAT1}



 




and the right conky
Code: Select all
# temps pour fermer conky en seconde. 0 = toujours actif
total_run_times 0

# affiche le texte sur la sortie standard
out_to_console no

# réglage de la mémoire, pour éviter le clignotement
double_buffer yes
# Soustraire les mémoires tampons de la mémoire utiliser
no_buffers yes
text_buffer_size 1024

# taux de rafraichissement de la fenêtre (en secondes)
update_interval 1

# nombre d'échantillons à utiliser pour calculer la moyenne d'utilisation
cpu_avg_samples 1
net_avg_samples 1

# taille et positon - largeur/hauteur
alignment top_left
minimum_size 800 800
maximum_width 535

# écart avec le bord x=gauche ou droit y= haut ou bas
gap_x 800
gap_y 60

# afficher les ombres
draw_shades no
# afficher des contours
draw_outline no
# contours autour des blocs de texte
draw_borders no
# largeur du contour
border_width 1
# largeur des marges
border_margin 1

own_window_argb_visual yes
own_window_type desktop
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Utiliser Xft (polices lissées etc)
use_xft yes
xftalpha .1

override_utf8_locale yes # force UTF8

#police a utiliser : use_xft doit être a "yes"
xftfont saxMono:size=8 #OCR A Std:size=5
# Tout le texte en majuscule
uppercase no

# Ajoute des espaces après certains objets pour éviter de les faire bouger.
# Fonctionne uniquement avec les polices Fixes
use_spacer yes

# Couleurs
default_color FFFFFF #blanc
default_shade_color 333333
default_outline_color black

color3 cf1c00 #rouge
color2 66FF00 #vert
color1 0077ff #bleu

own_window_argb_visual yes
own_window_colour 000000

own_window_argb_value 0
TEXT

${font Visitor TT1 BRK : pixelsize=12}${color1}USAGE DES PROCESSEURS ${font}
${color3}${voffset -5}${hr}
${offset 15}${color1}PROGRAMME -------- Pourcentage -------------PID-------------------------------------------------------- TEMPS
${offset 15}${color1}${top name 1}${color1}${goto 150}${top cpu 1}%                ${color1}${top pid 1}${alignr}${color1}${top time 1}
${offset 15}${color1}${top name 2}${color1}${goto 150}${top cpu 2}%                ${color1}${top pid 2}${alignr}${color1}${top time 2}
${offset 15}${color1}${top name 3}${color1}${goto 150}${top cpu 3}%                ${color1}${top pid 3}${alignr}${color1}${top time 3}

${font Visitor TT1 BRK : pixelsize=12}${color1}MEMOIRE PHYSIQUE UTILISÉ${font}
${color3}${voffset -5}${hr}
${offset 15}${color1}PROGRAMME -------- Pourcentage -------------PID --- ---------------------------------------------------- TEMPS
${offset 15}${color1}${top_mem name 1}${color1}${goto 150}${top_mem mem 1}%              ${color1}${top_mem pid 1}${alignr}${color1}${top_mem time 1}
${offset 15}${color1}${top_mem name 2}${color1}${goto 150}${top_mem mem 2}%              ${color1}${top_mem pid 2}${alignr}${color1}${top_mem time 2}
${offset 15}${color1}${top_mem name 3}${color1}${goto 150}${top_mem mem 3}%              ${color1}${top_mem pid 3}${alignr}${color1}${top_mem time 3}
${color1}${stippled_hr}${color}
${color1}CONNECTIONS INTERNET = ${tcp_portmon 1 65535 count}
 ${color1}Hotes${goto 320} ${color1}IP Distant ${goto 415} ${color1}Proto ${goto 450} Local ${goto 495}Dist$color
 ${color1}---------------------------------------------------------- ${color1}${goto 453} ${color1}Port ${goto 495} Port
 ${tcp_portmon 1 65535 rhost 0} ${goto 320} ${tcp_portmon 1 65535 rip 0} ${goto 415} ${tcp_portmon 1 65535 rservice 0} ${goto 450} ${color red}${tcp_portmon 1 65535 lport 0} ${goto 505}${tcp_portmon 1 65535 rport 0}$color
 ${tcp_portmon 1 65535 rhost 1} ${goto 320} ${tcp_portmon 1 65535 rip 1} ${goto 415} ${tcp_portmon 1 65535 rservice 1} ${goto 450} ${color red}${tcp_portmon 1 65535 lport 1} ${goto 505}${tcp_portmon 1 65535 rport 1}$color
 ${tcp_portmon 1 65535 rhost 2} ${goto 320} ${tcp_portmon 1 65535 rip 2} ${goto 415} ${tcp_portmon 1 65535 rservice 2} ${goto 450} ${color red}${tcp_portmon 1 65535 lport 2} ${goto 505}${tcp_portmon 1 65535 rport 2}$color
 ${tcp_portmon 1 65535 rhost 3} ${goto 320} ${tcp_portmon 1 65535 rip 3} ${goto 415} ${tcp_portmon 1 65535 rservice 3} ${goto 450} ${color red}${tcp_portmon 1 65535 lport 3} ${goto 505}${tcp_portmon 1 65535 rport 3}$color
 ${tcp_portmon 1 65535 rhost 4} ${goto 320} ${tcp_portmon 1 65535 rip 4} ${goto 415} ${tcp_portmon 1 65535 rservice 4} ${goto 450} ${color red}${tcp_portmon 1 65535 lport 4} ${goto 505}${tcp_portmon 1 65535 rport 4}$color
 ${tcp_portmon 1 65535 rhost 5} ${goto 320} ${tcp_portmon 1 65535 rip 5} ${goto 415} ${tcp_portmon 1 65535 rservice 5} ${goto 450} ${color red}${tcp_portmon 1 65535 lport 5} ${goto 505}${tcp_portmon 1 65535 rport 5}$color

 ${color1}MESSAGES SYSTEME
${color3}${voffset -5}${hr}

${color1}${execi 30 tail -n5 /var/log/syslog | fold -w80}
${font Visitor TT1 BRK : pixelsize=12}${color2}FIL RSS------DERNIERES NOUVELLES L.C.N${font}
${color3}${voffset -5}${hr}
${color1}${rss http://fr.canoe.ca/rss/feed/nouvelles/aujourdhui.xml 1 item_titles 5}
${color3}${voffset -5}${hr}


${color1}${voffset 10}${goto 170}${font LCDMono:style=bold:size=30}${time %H:%M}${font}
${color1}${voffset 5}${font Droid Sans:size=15:style=bold}${alignr}${time %A, %d %b. %Y}${font}
${color1}${voffset -74}${font Droid Sans Mono:style=bold:size=10}${execpi 300 DJS=`date +%_d`; cal -h | sed '1d' | sed s/"$DJS"'\b'/'${color orange}'"$DJS"'$color1'/}$font







This is very beautiful But i am new and I do have the Conky manager

Can u please tell me how to add yours to the Conky manager ??


thank u
User avatar
aqmint
Level 3
Level 3
 
Posts: 126
Joined: Mon Aug 04, 2014 7:35 am
Location: Frankfurt , Germany

Re: Conky Showoff thread

Postby virusdunil on Sat Aug 16, 2014 11:32 am

well first,create a folder then put 3 text files named at your choice in that folder...and copy the three codes on the three files...

in conky manager,clik on theme folder and go where your new conky is and select the 3 files :wink:
My Laptop:Thinkpad-SL510 dual core 64b 4g ram Qiana kde
My Desktop:Dimension E-521 single core 1 ghz 3200+ 4g ram Qiana kde 64
Girlfriend's desktop:Amd Athlon 64x2 1 ghz dual core 4g ram Qiana kde64
Kid's desktop:dual core 4g ram Qiana kde 64
User avatar
virusdunil
Level 2
Level 2
 
Posts: 74
Joined: Sun Mar 30, 2014 12:04 pm

Re: Conky Showoff thread

Postby Sector11 on Sat Aug 16, 2014 12:25 pm

virusdunil wrote:well first,create a folder then put 3 text files named at your choice in that folder...and copy the three codes on the three files...

in conky manager,clik on theme folder and go where your new conky is and select the 3 files :wink:


What is this "Conky Manager" I hear people talking about?
#! pushed to Debian SID & OpenBox
Conky PitStop
Sector11
Level 1
Level 1
 
Posts: 43
Joined: Mon Nov 22, 2010 10:33 am

Re: Conky Showoff thread

Postby virusdunil on Sat Aug 16, 2014 12:27 pm

My Laptop:Thinkpad-SL510 dual core 64b 4g ram Qiana kde
My Desktop:Dimension E-521 single core 1 ghz 3200+ 4g ram Qiana kde 64
Girlfriend's desktop:Amd Athlon 64x2 1 ghz dual core 4g ram Qiana kde64
Kid's desktop:dual core 4g ram Qiana kde 64
User avatar
virusdunil
Level 2
Level 2
 
Posts: 74
Joined: Sun Mar 30, 2014 12:04 pm

Re: Conky Showoff thread

Postby Sector11 on Sat Aug 16, 2014 12:56 pm

virusdunil wrote:http://www.teejeetech.in/p/conky-manager.html

Thanks ... I see its Ubuntu - launchpad PPA now I know why I don't use it. :D

I use YAD [zenity] and bash scripts to do basically the same thing - other than build the conky:
Image

Move the conky - easy: [Alt]+left click+hold and drag moves the conky:
Image

My daily conkys on desktop 1:
Image
#! pushed to Debian SID & OpenBox
Conky PitStop
Sector11
Level 1
Level 1
 
Posts: 43
Joined: Mon Nov 22, 2010 10:33 am

Re: Conky Showoff thread

Postby aqmint on Sat Aug 16, 2014 1:03 pm

virusdunil wrote:well first,create a folder then put 3 text files named at your choice in that folder...and copy the three codes on the three files...

in conky manager,clik on theme folder and go where your new conky is and select the 3 files :wink:



thanks will do
User avatar
aqmint
Level 3
Level 3
 
Posts: 126
Joined: Mon Aug 04, 2014 7:35 am
Location: Frankfurt , Germany

Re: Conky Showoff thread

Postby Sector11 on Mon Aug 18, 2014 6:39 pm

A new group of conkys - nine in all made for the wallpaper 1920x1080 - grimy_wall_by_alpha_10-d7bvin6.jpg (included in the archive)

Grimy_Wall
Image

File available at Deviant Art Conky Group - 6.6MB Zip

clock by easysid (modified) (See README)
lats and longs and email by Kaivalagi (See README_II)
#! pushed to Debian SID & OpenBox
Conky PitStop
Sector11
Level 1
Level 1
 
Posts: 43
Joined: Mon Nov 22, 2010 10:33 am

Re: Conky Showoff thread

Postby aqmint on Fri Aug 22, 2014 5:52 am

virusdunil wrote:well first,create a folder then put 3 text files named at your choice in that folder...and copy the three codes on the three files...

in conky manager,clik on theme folder and go where your new conky is and select the 3 files :wink:


Many thanks it is working very nice

But they are more to the left , How can i move them to the right please ??

I have been doing some reading , so I was editing the gap_x but it is still not moving the whole thing , just from one side

can u please tell me how to align it to fit my screen ??

thank u
User avatar
aqmint
Level 3
Level 3
 
Posts: 126
Joined: Mon Aug 04, 2014 7:35 am
Location: Frankfurt , Germany

Re: Conky Showoff thread

Postby virusdunil on Fri Aug 22, 2014 6:59 am

You can edit position via Conky manager...

select the page you want to move then click the edit widget tab (english key image)....do small adjust at a time ...try one setting,then another :wink:
My Laptop:Thinkpad-SL510 dual core 64b 4g ram Qiana kde
My Desktop:Dimension E-521 single core 1 ghz 3200+ 4g ram Qiana kde 64
Girlfriend's desktop:Amd Athlon 64x2 1 ghz dual core 4g ram Qiana kde64
Kid's desktop:dual core 4g ram Qiana kde 64
User avatar
virusdunil
Level 2
Level 2
 
Posts: 74
Joined: Sun Mar 30, 2014 12:04 pm

Re: Conky Showoff thread

Postby aqmint on Mon Aug 25, 2014 3:58 pm

Sector11 wrote:
virusdunil wrote:http://www.teejeetech.in/p/conky-manager.html

Thanks ... I see its Ubuntu - launchpad PPA now I know why I don't use it. :D

I use YAD [zenity] and bash scripts to do basically the same thing - other than build the conky:
Image

Move the conky - easy: [Alt]+left click+hold and drag moves the conky:
Image

My daily conkys on desktop 1:
Image



thank u sir for the tip as far as Moving conky it workes many thanks
User avatar
aqmint
Level 3
Level 3
 
Posts: 126
Joined: Mon Aug 04, 2014 7:35 am
Location: Frankfurt , Germany

Re: Conky Showoff thread

Postby Sector11 on Mon Aug 25, 2014 4:39 pm

aqmint wrote:thank u sir for the tip as far as Moving conky it workes many thanks

Please, no 'sir' - just another conky nut. If you want first name basis call me Sector or S11 :D

There's more, it works the same as any other open app in a window:
  1. [Alt]+[right-click-hold] - near the centre of a window (conky) - drag to move
  2. [Alt]+[right-click-hold] - near the edge|corner of a window (conky) - drag to re-size
  3. [Alt]+[left-click-hold] - anywhere in a window (conky) - drag to move
#! pushed to Debian SID & OpenBox
Conky PitStop
Sector11
Level 1
Level 1
 
Posts: 43
Joined: Mon Nov 22, 2010 10:33 am

Re: Conky Showoff thread

Postby aqmint on Mon Aug 25, 2014 4:42 pm

Sector11 wrote:
aqmint wrote:thank u sir for the tip as far as Moving conky it workes many thanks

Please, no 'sir' - just another conky nut. If you want first name basis call me Sector or S11 :D

There's more, it works the same as any other open app in a window:
  1. [Alt]+[right-click-hold] - near the centre of a window (conky) - drag to move
  2. [Alt]+[right-click-hold] - near the edge|corner of a window (conky) - drag to re-size
  3. [Alt]+[left-click-hold] - anywhere in a window (conky) - drag to move



Thanks S11 :)
User avatar
aqmint
Level 3
Level 3
 
Posts: 126
Joined: Mon Aug 04, 2014 7:35 am
Location: Frankfurt , Germany

Re: Conky Showoff thread

Postby izzo on Fri Sep 12, 2014 9:57 am

After a lot of trial & error, I do believe conky is a time eater :D

Conky:
conky.png


Desktop:
Screenshot.jpeg



Code: Select all
#own_window yes
#own_window_type desktop # Try conky 'normal' or 'override' or 'desktop'
#own_window_transparent yes
#own_window_hints undecorated,sticky,skip_taskbar,skip_pager,below
#own_window_class Conky

double_buffer no

alignment bottom_right
background yes

border_width 0
cpu_avg_samples 2
default_color green
default_outline_color white
default_shade_color white
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
use_xft yes
xftfont Sans Mono:size=9
gap_x 120
gap_y 100
minimum_size 5 5
net_avg_samples 2
no_buffers yes
out_to_console no
out_to_stderr no
extra_newline no
stippled_borders 0
update_interval 1.0
uppercase yes
use_spacer none
show_graph_scale no
show_graph_range no


TEXT

$alignc ${scroll 37 $nodename / $sysname / $kernel }
$hr
$alignc ${color grey}Uptime:$color $uptime

$alignc *     *     *     *     *     *     *
$alignc Audacious $audacious_status
$alignc ${color yellow} ${audacious_title 30} ${color}

$alignc *     *     *     *     *     *     *
$alignc ${color grey}CPU
$alignc ${color pink}Intel Celeron G1820 @ 2.70GHz${color}
# ${scroll 30 20 ${color pink} ${execi 50000 grep -m 1 name /proc/cpuinfo}}
$alignc ${color grey} Usage (combined):$color $cpu%
${cpubar 7}
CPU core 1: ${cpu cp1}% $alignr CPU core 2: ${cpu cp2}%
${cpugraph cpu1 25, 105} $alignr ${cpugraph cpu2 25, 105}
$alignc ${color grey}RAM:$color $mem/$memmax - $memperc%
${membar 7}
$alignc ${color grey}Swap:$color $swap/ $swapmax - $swapperc%
${swapbar 7}

$alignc *     *     *     *     *     *     *
$alignc ${color grey}File systems (used / total)
/             $color${fs_used /} / ${fs_size /} ${fs_bar 8 /}
/storage   $color${fs_used /storage} / ${fs_size /storage} ${fs_bar 8 /storage}
/movies   $color${fs_used /movies} / ${fs_size /movies} ${fs_bar 8 /movies}

$alignc *     *     *     *     *     *     *
$alignc ${color grey}Network(s)
$alignc Wired - internal IP ${color pink} ${addrs eth1} ${color}
Down:$color ${downspeed eth1}${color grey} $alignr Up:$color ${upspeed eth1}
${downspeedgraph eth1 25, 105 7500} $alignr ${upspeedgraph eth1 25, 105 800} # last digit in curly braces is how high the scale is in kb/s
# $alignc Wireless - ${addrs etho}
# $alignc > Up:$color ${upspeed eth0}${color grey} / Down:$color ${downspeed eth0}

$alignc *     *     *     *     *     *     *
$alignc ${color grey}Processes:$color $processes  ${color grey}Running:$color $running_processes
${color grey}Name              $alignc PID      $alignr CPU%  MEM%
${color red} ${top name 1} $alignc ${top pid 1} $alignr ${top cpu 1}  ${top mem 1}
${color yellow} ${top name 2} $alignc ${top pid 2} $alignr ${top cpu 2}  ${top mem 2}
${color blue} ${top name 3} $alignc ${top pid 3} $alignr ${top cpu 3}  ${top mem 3}
User avatar
izzo
Level 2
Level 2
 
Posts: 60
Joined: Wed Mar 02, 2011 5:36 pm
Location: Vulgaria

Re: Conky Showoff thread

Postby myrkat on Wed Oct 08, 2014 11:44 am

Not sure it's "showing off" - as there's no fancy wallpaper to move a conky into the center of the screen so you don't ever get to see it if you actually USE your computer...

Instead, I throw it all to the RIGHT and use the other 80%+ of the screen to actually get stuff done AND be able to see my conky info. I am very dependant on the calendar(s) especially!

This is the right-side of my 1920x1080 desktop:
Mint-KDE-conky_screenshot.jpg
right-side of my desktop, showing conky scripts (3)


THREE (3) scripts running, Top Right, Top Middle and Bottom Right:
Code: Select all
#  conky_tr -> analog clock/date/weather/sysinfo circles
#  mangled by myrkat

# Basic Settings
background no
cpu_avg_samples 3
double_buffer yes
imlib_cache_size 0
net_avg_samples 3
no_buffers yes
override_utf8_locale yes
temperature_unit fahrenheit
text_buffer_size 2048
total_run_times 0
update_interval 1
uppercase no
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5

# Window specifications #
own_window_class Conky
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_argb_visual yes
own_window_argb_value 0
border_inner_margin 0
border_outer_margin 0

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Positioning & Colors
alignment tr
gap_x 10
gap_y 10
#minimum_size 200 500
maximum_width 200
default_color FFFFFF
color0 FF6060
color1 CC4C4C
color2 A33D3D
color3 823131
color4 682727
color5 DDDDDD
color6 BBBBBB
color7 999999
color8 777777
color9 555555

# Lua Load  #
lua_load ~/.conky/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${voffset 8}${font caviar dreams:size=16}${time %A}${font}${voffset -8}${alignr 50}${color5}${font caviar dreams:size=38}${time %e}${font}
${voffset -30}${color6}${font caviar dreams:bold:size=18}${time %b}${font}${voffset -3} ${color8}${font caviar dreams:size=20}${time %Y}${font}${color0}${hr}
${color5}${goto 142}${font caviar dreams:bold:size=10}${time %l}:${time %M}${time %P}
${voffset 140}${font caviar dreams:size=10}${color0}${alignr}San Luis Obispo${font}
${font caviar dreams:size=10}${color0}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ KSBP temperature 30} °F${font}
${font caviar dreams:size=8}${color6}${voffset -1}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ KSBP cloud_cover 30}${font}
${font caviar dreams:size=8}${color5}${voffset -2}${goto 127}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ KSBP humidity 30}${font caviar dreams:size=8}${color6}${alignr}${voffset 0}% humidity${font}
${font caviar dreams:size=8}${color6}${voffset 0}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ KSBP weather 30}${font}
${image ~/.conky/roy.png -p 50,113}
${color9}${goto 78}${voffset -35}cores 1-4
${color0}${goto 85}${voffset -1}${cpu cpu}%
${color}${goto 85}${voffset -2}CPU
${color9}${goto 78}${voffset -4}cores 5-8
${color0}${goto 65}${voffset 16}${memperc}%
${color}${goto 65}RAM
${color0}${goto 90}${voffset 26}${fs_used_perc /}%
${color}${goto 90}root
${color0}${goto 115}${voffset 22}${fs_used_perc /home}%
${color}${goto 115}Home
${color}${goto 142}${voffset 26}Net
${color0}${alignr}${goto 105}${voffset 0}${if_up wlan0}${downspeed wlan0}${endif}${if_up eth0}${downspeed eth0}${endif}
${color0}${alignr}${goto 105}${if_up wlan0}${upspeed wlan0}${endif}${if_up eth0}${upspeed eth0}${endif}

Code: Select all
#  conky_tr -> calendars/previous 2/next 2/fading
#  mangled by myrkat

# Basic Settings
background no
cpu_avg_samples 3
double_buffer yes
imlib_cache_size 0
net_avg_samples 3
no_buffers yes
override_utf8_locale yes
temperature_unit celsius  # fahrenheit
text_buffer_size 2048
total_run_times 0
update_interval 1
uppercase no
use_xft yes
xftfont Ubuntu Mono:size=9.0   # caviar dreams:size=8
xftalpha 0.5

# Window specifications #
own_window_class Conky
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_argb_visual yes
own_window_argb_value 0
border_inner_margin 0
border_outer_margin 0

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Positioning & Colors
alignment tr
gap_x 190
gap_y 55
#minimum_size 220 280
maximum_width 180
default_color FFFFFF
color0 FF6060
color1 CC4C4C
color2 A33D3D
color3 823131
color4 682727
color5 DDDDDD
color6 BBBBBB
color7 999999
color8 777777
color9 555555

TEXT
${color4}${execpi 3600 YEAR=`date --date='2 months ago' +%_Y`; MONTH=`date --date='2 months ago' +%_m`; cal -m $MONTH $YEAR}
${color4}${voffset -8}${hr}
${color2}${execpi 3600 YEAR=`date --date='1 month ago' +%_Y`; MONTH=`date --date='1 month ago' +%_m`; cal -m $MONTH $YEAR}
${color2}${voffset -8}${hr}
${color}${alignc}${color6}${time %B %G}
${color0}${execpi 3600 DJS=`date +%_d`; cal -h | sed '1d' | sed '/./!d' | sed 's/$/ /' | fold -w 21 | sed -n '/^.\{21\}/p' | sed 's/^/ /' | sed /" $DJS "/s/" $DJS "/" "'${color5}'"$DJS"'${color3}'" "/}
${color2}${voffset -8}${hr}
${color2}${execpi 3600 YEAR=`date --date='1 month' +%_Y`; MONTH=`date --date='1 month' +%_m`; cal -m $MONTH $YEAR}
${color4}${voffset -8}${hr}
${color4}${execpi 3600 YEAR=`date --date='2 months' +%_Y`; MONTH=`date --date='2 months' +%_m`; cal -m $MONTH $YEAR}

Code: Select all
#  conky_br -> clementine/detailed sysinfo/top-processes/multi-clock
#  mangled by myrkat 2014-04-25 (removed clementine stuff)

# Basic Settings
background no
cpu_avg_samples 3
double_buffer yes
imlib_cache_size 0
net_avg_samples 3
no_buffers yes
override_utf8_locale yes
temperature_unit celsius  # fahrenheit
text_buffer_size 2048
total_run_times 0
update_interval 1
uppercase no
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5

# Window specifications #
own_window_class Conky
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_argb_visual yes
own_window_argb_value 0
border_inner_margin 0
border_outer_margin 0

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes # just for conky_br

# Positioning & Colors
alignment br
gap_x 15
gap_y 15
#minimum_size 310 300
maximum_width 310
default_color FFFFFF
color0 FF6060
color1 CC4C4C
color2 A33D3D
color3 823131
color4 682727
color5 DDDDDD
color6 BBBBBB
color7 999999
color8 777777
color9 555555

TEXT
${color1}${voffset 4}$hr
${color1}${font :size=9}$alignr $nodename ($machine) uptime: $uptime
${color3}$alignr${pre_exec cat /etc/issue.net} ~ $kernel
${color4}${voffset -5}$hr
${color1}CPU Usage: ${alignr}${color1}$cpu% @${freq_g cpu}GHz
${color9}${voffset -4}${cpugraph 16,310 000000 FF6060}
${color1}RAM ${alignr}${color1}$mem / $memmax ($memperc%)
#${color2}${membar 8}
${color1}SWAP ${alignr}${color1}$swap / $swapmax ($swapperc%)
${color1}${voffset -6}$hr
${color1}Highest CPU & Memory $alignr CPU%  MEM%
${color6}${top name 1}$alignr${top cpu 1}  ${top mem 1}
${color7}${top name 2}$alignr${top cpu 2}  ${top mem 2}
${color8}${top name 3}$alignr${top cpu 3}  ${top mem 3}
${color9}${top name 4}$alignr${top cpu 4}  ${top mem 4}
${color 333333}${top name 5}$alignr${top cpu 5}  ${top mem 5}
${color 222222}${top name 6}$alignr${top cpu 6}  ${top mem 6}
${color2}${voffset -6}${hr}
${color1}HDD Read: ${alignc}${color2}${diskio_read}/s ${alignr}${color2}${diskio_write}/s ${color1} :HDD Write
${color9}${voffset -4}${diskiograph_read 16,150 000000 FF6060} ${alignr}${color9}${diskiograph_write 16,150 000000 FF6060}
${execi 30 rm -f .conky_eth0; ifconfig -s | grep eth0 > /dev/null && ifconfig -a eth0 | grep 'inet addr:' > /dev/null && touch .conky_eth0}${execi 30 rm -f .conky_wlan0; ifconfig -s | grep wlan0 > /dev/null && ifconfig -a wlan0 | grep 'inet addr:' > /dev/null && touch .conky_wlan0}${if_existing /home/myrkat/.conky_eth0}${color2}${voffset -6}Ext IP: ${color0}${execpi 36000 wget -q -O - checkip.dyndns.org|sed -e 's/.*Current IP Address: //' -e 's/<.*$//';} ${alignr}${color2}Int IP: ${color0}${addr eth0}
${color2}Download: ${color3}${downspeed eth0}${alignr}${color3}${upspeed eth0}${color2} :Upload
${color9}${voffset -4}${downspeedgraph eth0 16,150 000000 FF6060} ${alignr}${upspeedgraph eth0 16,150 000000 FF6060}
${color1}${voffset -6}Total Download: ${color8}${totaldown eth0} ${alignr}${color1}Total Upload: ${color8}${totalup eth0}${endif}
#${if_existing /home/myrkat/.conky_wlan0}${color2}${voffset -6}Ext IP: ${color0}${execpi 36000 wget -q -O - checkip.dyndns.org|sed -e 's/.*Current IP Address: //' -e 's/<.*$//';} ${alignr}${color2}Int IP: ${color0}${addr wlan0}
#${color2}Download: ${color3}${downspeed wlan0}${alignr}${color3}${upspeed wlan0}${color2} :Upload
#${color9}${voffset -4}${downspeedgraph wlan0 16,150 000000 FF6060} ${alignr}${upspeedgraph wlan0 16,150 000000 FF6060}
#${color1}${voffset -6}Total Download: ${color8}${totaldown wlan0} ${alignr}${color1}Total Upload: ${color8}${totalup wlan0}${endif}
${color8}${font caviar dreams:size=14}${goto 0}${tztime Europe/Copenhagen %H:%M} DK${color6}${alignr}${tztime America/Los_Angeles %H:%M} CA


The scripts use clock_rings.lua (which I slightly edited to reduce/eliminate the memory leak). Needed to compress due to forum issues with .lua files. Here that is:
clock_rings.lua.tar.gz
lua script to get rings in conky. Patched for memory leak
(2.81 KiB) Downloaded 2 times


I used to have the "anowplaying.py" rigged for clementine (complete with blank cover.jpg when nothing was playing), but I moved to gmusicbrowser and use that programs overlay controls (much better, once one figures it all out). I have this on a couple of desktops and a laptop, so tweaking the offsets to get the rings' texts to line up is usually needed.

Finally, just a reminder this setup is completely FUNCTION over FORM. No fancy graphics that are hidden with the first window open, etc. In fact, when I play WOW (under Wine) I have it take up all of the screen BUT the conky area, and remove the titlebar/borders/etc. (love KDE) so it's like a "full screen" but only 80% and I can still have some desktop:
Mint-KDE-WoW_screenshot.jpg
running WOW borderless & w/o system interrupts. Quasi-full screen!


That's about it!
Main Comp: i7-4770K @ 3.5GHz + nVidia 760GTX + 16GB RAM + SSD + HDD
Linux Mint 17 - KDE
SteamOS Beta
Windows 8.1 Pro x64 (only for Xara)
User avatar
myrkat
Level 1
Level 1
 
Posts: 35
Joined: Sun Feb 02, 2014 7:10 pm

Re: Conky Showoff thread

Postby myedroid on Wed Oct 08, 2014 10:57 pm

I found and edited a couple conky's I liked (Gotham and one by CAYMUS):

Gotham
Code: Select all
use_xft yes
xftfont 123:size=8
xftalpha 0.1
update_interval 1
total_run_times 0

own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_colour 000000
own_window_argb_visual yes
own_window_argb_value 0

double_buffer yes
#minimum_size 250 5
maximum_width 450
draw_shades yno
draw_outline no
draw_borders no
draw_graph_borders no
default_color white
default_shade_color red
default_outline_color green
alignment top_middle
gap_x 0
gap_y 20
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 1
override_utf8_locale yes
use_spacer yes


minimum_size 0 0
TEXT
${voffset 10}${color EAEAEA}${font GE Inspira:pixelsize=115}${time %I:%M}${font}${voffset -84}${offset 10}${color #00cc00}${font GE Inspira:pixelsize=42}${time %d} ${voffset -15}${color EAEAEA}${font GE Inspira:pixelsize=22}${time  %B} ${font}${voffset 24}${font GE Inspira:pixelsize=58}${offset -148}${time %a}${font}
${voffset 1}${offset 12}${font Ubuntu:pixelsize=12}${color 00cc00}HD ${offset 9}$color${fs_free /} / ${fs_size /}${offset 30}${color #00cc00}RAM ${offset 9}$color$mem / $memmax${offset 30}${color #00cc00}CPU ${offset 9}$color${cpu cpu0}%


CAYMUS's
Code: Select all
background yes
update_interval 1

cpu_avg_samples 2
net_avg_samples 2
temperature_unit celsius

double_buffer yes
no_buffers yes
text_buffer_size 2048

gap_x 10
gap_y 10
minimum_size 285 800
#maximum_width 190
own_window yes
own_window_type override
own_window_transparent yes
own_window_colour 000000
own_window_argb_visual yes
own_window_argb_value 0
own_window_hints undecorated,sticky,skip_taskbar,skip_pager,below
border_inner_margin 0
border_outer_margin 0
alignment bottom_right

draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

override_utf8_locale yes
use_xft yes
xftfont 6x10:size=8
xftalpha 0.5
uppercase no

default_color 666666
color1 888888
color2 AAAAAA
color3 DDDDDD
color4 CC3333
color5 00cc00
color6 0045ff

lua_load ~/.conky/conky_10.lua
lua_draw_hook_pre main_rings

own_window_argb_value 0
own_window_argb_visual no
own_window_colour 000000
TEXT
${image ~/.conky/conky10-pic/cpu.png   300x180  -p   0,10}
${image ~/.conky/conky10-pic/mem.png  300x180 -p 0,200} 
${image ~/.conky/conky10-pic/hdd.png  300x180 -p 0,390}
${image ~/.conky/conky10-pic/net.png  300x180 -p 0,580}

${voffset 0}
${goto 65}${font 6x10:size=7,weight:normal}${color5}core 1:${goto 100}${cpu cpu1}%
${goto 65}${font 6x10:size=7,weight:normal}${color5}core 2:${goto 100}${cpu cpu2}%
${goto 65}${font 6x10:size=7,weight:normal}${color5}core 3:${goto 100}${cpu cpu3}%
${goto 65}${font 6x10:size=7,weight:normal}${color5}core 4:${goto 100}${cpu cpu4}%
${voffset -80}
# Next Line contros the cpu temp info
${goto 165}${font 6x10:size=9,weight:normal}${color6}CPU Temp:$color6 ${hwmon 0 temp 1}°C ${color #00ff00}
${goto 165}${font 6x10:size=5,weight:normal}${color2}${top name 1}${goto 220}${top pid 1}${goto 250}${top cpu 1}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top name 2}${goto 220}${top pid 2}${goto 250}${top cpu 2}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top name 3}${goto 220}${top pid 3}${goto 250}${top cpu 3}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top name 4}${goto 220}${top pid 3}${goto 250}${top cpu 4}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top name 5}${goto 220}${top pid 3}${goto 250}${top cpu 5}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${threads} process


${voffset 110}
${goto 55}${font 6x10:size=7,weight:normal}${color5}RAM ${goto 90}$mem
${goto 55}${font 6x10:size=7,weight:normal}${color5}SWAP ${goto 90}$swap
${voffset -45}
${goto 165}${font 6x10:size=5,weight:normal}${color2}${top_mem name 1}${goto 220}${top_mem pid 1}${goto 250}${top_mem mem 1}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top_mem name 2}${goto 220}${top_mem pid 2}${goto 250}${top_mem mem 2}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top_mem name 3}${goto 220}${top_mem pid 3}${goto 250}${top_mem mem 3}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top_mem name 4}${goto 220}${top_mem pid 3}${goto 250}${top_mem mem 4}%
${goto 165}${font 6x10:size=5,weight:normal}${color}${top_mem name 5}${goto 220}${top_mem pid 3}${goto 250}${top_mem mem 5}%

${voffset 130}
${goto 55}${font 6x10:size=7,weight:normal}${color5}/home${goto 90}${fs_used /home}
${goto 55}${font 6x10:size=7,weight:normal}${color5}/${goto 90}${fs_used /}
${goto 55}${diskiograph 10,80 AAAAAA AAAAAA}

${voffset -70}
${goto 160}${color6}${font Digital Readout Thick Upright:size=20}${time %l}:${time %M}${time %P}


# Net Panel
${voffset 40}
${goto 155}${color6}${font 6x10:size=8,weight:bold}${if_existing /proc/net/route eth0}eth0 ${addr eth0}
${goto 165}${color}${font 6x10:size=5,weight:normal}Down: ${downspeed eth0}
${goto 165}${color}${font 6x10:size=7,weight:normal}Up: ${upspeed eth0}
${goto 165}Total Down: ${totaldown eth0}
${goto 165}Total Up: ${totalup eth0}

${voffset -68}
${goto 155}${color1}${font 6x10:size=7,weight:bold}${else}${if_existing /proc/net/route wlan0}wifi ${addr wlan0}
${goto 165}${color}${font 6x10:size=5,weight:normal}AP: ${wireless_essid wlan0}
${goto 165}Mode: ${wireless_mode wlan0} ${goto 228}Quality: ${wireless_link_qual_perc wlan0}%
${goto 165}Down: ${downspeed wlan0}
${goto 165}Up: ${upspeed wlan0}
${goto 165}Total Down: ${totaldown wlan0}
${goto 165}Total Up: ${totalup wlan0}
${else} ${goto 150}"Network Unavailable"
${endif} ${endif}
Attachments
ConkySetup.png
myedroid
Level 1
Level 1
 
Posts: 27
Joined: Thu Apr 17, 2014 11:12 am

Linux Mint is funded by ads and donations.
 
Previous

Return to Compiz, Conky, Docks, & Widgets

Who is online

Users browsing this forum: No registered users and 2 guests