Bootup Log?

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read how to get help

Bootup Log?

Postby Andy Mack on Sun Mar 16, 2008 10:22 am

Hiya, i seem to be getting some errors I think upon booting.

The splash screen schows as normal when booting but just before gnome pops up i get messages that I'm unable to read as they appear and disappear within seconds.
Is there a log file of what that was somewhere?

It mentions something about network applet hal something something then IPV6 I think. Sorry it's not much info but It's too quick to read and take in.
I use wireless ETH1 all the time, very rarely use ethernet and wondered if it's looking at ETH0, not finding anything and reporting?

Thanks
Andy
Andy Mack
Level 3
Level 3
 
Posts: 118
Joined: Thu Feb 14, 2008 8:11 pm

Linux Mint is funded by ads and donations.
 

Re: Bootup Log?

Postby Dennis99 on Sun Mar 16, 2008 10:36 am

Look in /var/log/boot and var/log/dmesg and /var/log/messages
User avatar
Dennis99
Level 2
Level 2
 
Posts: 54
Joined: Wed Mar 12, 2008 3:57 pm
Location: Gorleston, Norfolk, UK

Re: Bootup Log?

Postby Andy Mack on Sun Mar 16, 2008 11:09 am

Boot says: Nothing has been logged yet.
Dmesg is long as hell, I'll post it but what I see upon booting isn't shown in dmesg. Some things I have noticed mention Not Found.

[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe92400 (usable)
[ 0.000000] BIOS-e820: 00000000bfe92400 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 786066) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 786066
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 786066
[ 0.000000] On node 0 totalpages: 786066
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4349 pages used for memmap
[ 0.000000] HighMem zone: 552341 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FBBF0 checksum 0
[ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT BFE93E00, 005C (r1 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: FACP BFE93C9C, 00F4 (r4 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: DSDT BFE94400, 565E (r2 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS BFEA2C00, 0040
[ 0.000000] ACPI: HPET BFE93F00, 0038 (r1 DELL M08 1 ASL 61)
[ 0.000000] ACPI: APIC BFE94000, 0068 (r1 DELL M08 27D70802 ASL 47)
[ 0.000000] ACPI: MCFG BFE93FC0, 003E (r16 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: SLIC BFE9409C, 0176 (r1 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: BOOT BFE93BC0, 0028 (r1 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: SSDT BFE925BC, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:34000000)
[ 0.000000] Built 1 zonelists. Total pages: 779925
[ 0.000000] Kernel command line: root=/dev/sda2 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1994.644 MHz processor.
[ 8.511115] Console: colour VGA+ 80x25
[ 8.511375] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 8.511640] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 8.631415] Memory: 3104652k/3144264k available (2015k kernel code, 38344k reserved, 915k data, 364k init, 2226760k highmem)
[ 8.631422] virtual kernel memory layout:
[ 8.631423] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 8.631424] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 8.631425] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 8.631426] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 8.631427] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 8.631428] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 8.631429] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 8.631432] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 8.631464] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 8.631591] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 8.631595] hpet0: 3 64-bit timers, 14318180 Hz
[ 8.712548] Calibrating delay using timer specific routine.. 3993.44 BogoMIPS (lpj=7986898)
[ 8.712567] Security Framework v1.0.0 initialized
[ 8.712572] SELinux: Disabled at boot.
[ 8.712583] Mount-cache hash table entries: 512
[ 8.712692] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 8.712699] monitor/mwait feature present.
[ 8.712700] using mwait in idle threads.
[ 8.712704] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 8.712707] CPU: L2 cache: 2048K
[ 8.712709] CPU: Physical Processor ID: 0
[ 8.712710] CPU: Processor Core ID: 0
[ 8.712712] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 8.712720] Compat vDSO mapped to ffffe000.
[ 8.712731] Checking 'hlt' instruction... OK.
[ 8.728626] SMP alternatives: switching to UP code
[ 8.728988] Early unpacking initramfs... done
[ 9.051158] ACPI: Core revision 20070126
[ 9.051195] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 9.054610] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 9.054623] SMP alternatives: switching to SMP code
[ 9.054686] Booting processor 1/1 eip 3000
[ 9.064871] Initializing CPU#1
[ 9.144177] Calibrating delay using timer specific routine.. 3988.87 BogoMIPS (lpj=7977757)
[ 9.144183] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 9.144187] monitor/mwait feature present.
[ 9.144189] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 9.144191] CPU: L2 cache: 2048K
[ 9.144193] CPU: Physical Processor ID: 0
[ 9.144194] CPU: Processor Core ID: 1
[ 9.144195] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 9.144661] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 9.144683] Total of 2 processors activated (7982.32 BogoMIPS).
[ 9.144879] ENABLING IO-APIC IRQs
[ 9.145076] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 9.292130] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 9.312128] Brought up 2 CPUs
[ 9.358356] migration_cost=20
[ 9.358462] Booting paravirtualized kernel on bare hardware
[ 9.358547] Time: 13:59:14 Date: 02/16/108
[ 9.358565] NET: Registered protocol family 16
[ 9.358632] EISA bus registered
[ 9.358636] ACPI: bus type pci registered
[ 9.369198] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=14
[ 9.369200] PCI: Using configuration type 1
[ 9.369201] Setting up standard PCI resources
[ 9.376359] ACPI: EC: Look up EC in DSDT
[ 9.420849] ACPI: Interpreter enabled
[ 9.420852] ACPI: (supports S0 S3 S4 S5)
[ 9.420865] ACPI: Using IOAPIC for interrupt routing
[ 9.440944] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 9.440957] PCI: Probing PCI hardware (bus 00)
[ 9.443216] PCI: Transparent bridge - 0000:00:1e.0
[ 9.443303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 9.443693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 9.443825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 9.443914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 9.444023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 9.444128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 9.453856] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
[ 9.453959] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 9.454058] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 9.454158] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 9.454258] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 9.454360] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 9.454461] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 9.454554] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 9.454667] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 9.454677] pnp: PnP ACPI init
[ 9.454686] ACPI: bus type pnp registered
[ 9.490930] pnp: PnP ACPI: found 12 devices
[ 9.490932] ACPI: ACPI bus type pnp unregistered
[ 9.490935] PnPBIOS: Disabled by ACPI PNP
[ 9.490971] PCI: Using ACPI for IRQ routing
[ 9.490974] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 9.549772] NET: Registered protocol family 8
[ 9.549774] NET: Registered protocol family 20
[ 9.549816] pnp: 00:05: ioport range 0xc80-0xcff could not be reserved
[ 9.549823] pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 9.549827] pnp: 00:09: ioport range 0x900-0x97f has been reserved
[ 9.549829] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 9.549831] pnp: 00:09: ioport range 0x1000-0x1005 has been reserved
[ 9.549834] pnp: 00:09: ioport range 0x1008-0x100f has been reserved
[ 9.549838] pnp: 00:0a: ioport range 0xf400-0xf4fe has been reserved
[ 9.549840] pnp: 00:0a: ioport range 0x1006-0x1007 has been reserved
[ 9.549843] pnp: 00:0a: ioport range 0x100a-0x1059 could not be reserved
[ 9.549845] pnp: 00:0a: ioport range 0x1060-0x107f has been reserved
[ 9.549847] pnp: 00:0a: ioport range 0x1080-0x10bf has been reserved
[ 9.549850] pnp: 00:0a: ioport range 0x10c0-0x10df has been reserved
[ 9.549852] pnp: 00:0a: ioport range 0x1010-0x102f has been reserved
[ 9.549856] pnp: 00:0b: iomem range 0x0-0x9efff could not be reserved
[ 9.549859] pnp: 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
[ 9.549861] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 9.549864] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 9.551840] Time: tsc clocksource has been installed.
[ 9.551852] Switched to high resolution mode on CPU 0
[ 9.551921] Switched to high resolution mode on CPU 1
[ 9.580087] PCI: Bridge: 0000:00:01.0
[ 9.580090] IO window: e000-efff
[ 9.580093] MEM window: fa000000-feafffff
[ 9.580096] PREFETCH window: e0000000-efffffff
[ 9.580099] PCI: Bridge: 0000:00:1c.0
[ 9.580101] IO window: disabled.
[ 9.580106] MEM window: disabled.
[ 9.580110] PREFETCH window: disabled.
[ 9.580116] PCI: Bridge: 0000:00:1c.1
[ 9.580117] IO window: disabled.
[ 9.580123] MEM window: f9f00000-f9ffffff
[ 9.580128] PREFETCH window: disabled.
[ 9.580133] PCI: Bridge: 0000:00:1c.3
[ 9.580136] IO window: d000-dfff
[ 9.580142] MEM window: f9c00000-f9efffff
[ 9.580147] PREFETCH window: f0000000-f01fffff
[ 9.580153] PCI: Bridge: 0000:00:1e.0
[ 9.580154] IO window: disabled.
[ 9.580160] MEM window: f9b00000-f9bfffff
[ 9.580164] PREFETCH window: disabled.
[ 9.580180] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.580184] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 9.580207] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.580212] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 9.580236] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 9.580242] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 9.580266] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 9.580272] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 9.580286] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 9.580295] NET: Registered protocol family 2
[ 9.631760] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.631808] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 9.632389] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 9.632593] TCP: Hash tables configured (established 131072 bind 65536)
[ 9.632596] TCP reno registered
[ 9.647854] checking if image is initramfs... it is
[ 10.285759] Freeing initrd memory: 9004k freed
[ 10.285857] Simple Boot Flag at 0x79 set to 0x1
[ 10.286254] audit: initializing netlink socket (disabled)
[ 10.286267] audit(1205675954.296:1): initialized
[ 10.286345] highmem bounce pool size: 64 pages
[ 10.287872] VFS: Disk quotas dquot_6.5.1
[ 10.287909] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.287978] io scheduler noop registered
[ 10.287980] io scheduler anticipatory registered
[ 10.287982] io scheduler deadline registered
[ 10.287993] io scheduler cfq registered (default)
[ 10.288127] Boot video device is 0000:01:00.0
[ 10.288197] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 10.288232] assign_interrupt_mode Found MSI capability
[ 10.288234] Allocate Port Service[0000:00:01.0:pcie00]
[ 10.288261] Allocate Port Service[0000:00:01.0:pcie02]
[ 10.288328] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.288387] assign_interrupt_mode Found MSI capability
[ 10.288389] Allocate Port Service[0000:00:1c.0:pcie00]
[ 10.288413] Allocate Port Service[0000:00:1c.0:pcie02]
[ 10.288507] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.288566] assign_interrupt_mode Found MSI capability
[ 10.288568] Allocate Port Service[0000:00:1c.1:pcie00]
[ 10.288593] Allocate Port Service[0000:00:1c.1:pcie02]
[ 10.288686] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 10.288745] assign_interrupt_mode Found MSI capability
[ 10.288747] Allocate Port Service[0000:00:1c.3:pcie00]
[ 10.288770] Allocate Port Service[0000:00:1c.3:pcie02]
[ 10.288915] isapnp: Scanning for PnP cards...
[ 10.642719] isapnp: No Plug & Play device found
[ 10.659460] Real Time Clock Driver v1.12ac
[ 10.659582] hpet_resources: 0xfed00000 is busy
[ 10.659638] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 10.660487] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 10.660589] input: Macintosh mouse button emulation as /class/input/input0
[ 10.660651] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 10.663785] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.663789] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.663885] mice: PS/2 mouse device common for all mice
[ 10.663966] EISA: Probing bus 0 at eisa.0
[ 10.663973] Cannot allocate resource for EISA slot 1
[ 10.664005] EISA: Detected 0 cards.
[ 10.664076] TCP cubic registered
[ 10.664086] NET: Registered protocol family 1
[ 10.664102] Using IPI No-Shortcut mode
[ 10.664251] Magic number: 0:5:989
[ 10.664256] hash matches device ttyd2
[ 10.664511] Freeing unused kernel memory: 364k freed
[ 10.667003] input: AT Translated Set 2 keyboard as /class/input/input1
[ 11.834010] fuse init (API version 7.8)
[ 11.838109] Capability LSM initialized
[ 11.844621] ACPI: SSDT BFE930F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 11.844795] ACPI: SSDT BFE92A88, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 11.845035] Monitor-Mwait will be used to enter C-1 state
[ 11.845038] Monitor-Mwait will be used to enter C-2 state
[ 11.845040] Monitor-Mwait will be used to enter C-3 state
[ 11.845044] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 11.845048] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 11.845233] ACPI: SSDT BFE93378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 11.845394] ACPI: SSDT BFE9306D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 11.845665] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 11.845669] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.092000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.096000] Time: hpet clocksource has been installed.
[ 3.096000] ACPI: Thermal Zone [THM] (51 C)
[ 3.484000] usbcore: registered new interface driver usbfs
[ 3.484000] usbcore: registered new interface driver hub
[ 3.484000] usbcore: registered new device driver usb
[ 3.484000] USB Universal Host Controller Interface driver v3.0
[ 3.484000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.484000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.484000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.484000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.484000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20
[ 3.484000] usb usb1: configuration #1 chosen from 1 choice
[ 3.484000] hub 1-0:1.0: USB hub found
[ 3.484000] hub 1-0:1.0: 2 ports detected
[ 3.512000] SCSI subsystem initialized
[ 3.524000] libata version 2.21 loaded.
[ 3.588000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 3.588000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.588000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.588000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.588000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00
[ 3.588000] usb usb2: configuration #1 chosen from 1 choice
[ 3.588000] hub 2-0:1.0: USB hub found
[ 3.588000] hub 2-0:1.0: 2 ports detected
[ 3.692000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.692000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.692000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.692000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 3.692000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80
[ 3.692000] usb usb3: configuration #1 chosen from 1 choice
[ 3.692000] hub 3-0:1.0: USB hub found
[ 3.692000] hub 3-0:1.0: 2 ports detected
[ 3.796000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 3.796000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.796000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.796000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 3.796000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60
[ 3.796000] usb usb4: configuration #1 chosen from 1 choice
[ 3.796000] hub 4-0:1.0: USB hub found
[ 3.796000] hub 4-0:1.0: 2 ports detected
[ 3.900000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
[ 3.900000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.900000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.900000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 3.900000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40
[ 3.900000] usb usb5: configuration #1 chosen from 1 choice
[ 3.900000] hub 5-0:1.0: USB hub found
[ 3.900000] hub 5-0:1.0: 2 ports detected
[ 4.004000] Clocksource tsc unstable (delta = -251461252 ns)
[ 4.004000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21
[ 4.004000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 4.004000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.004000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 4.004000] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.004000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 4.004000] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400
[ 4.008000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.008000] usb usb6: configuration #1 chosen from 1 choice
[ 4.008000] hub 6-0:1.0: USB hub found
[ 4.008000] hub 6-0:1.0: 4 ports detected
[ 4.112000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 4.112000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.112000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.112000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 4.112000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.112000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.112000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000
[ 4.116000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.116000] usb usb7: configuration #1 chosen from 1 choice
[ 4.116000] hub 7-0:1.0: USB hub found
[ 4.116000] hub 7-0:1.0: 6 ports detected
[ 4.220000] ahci 0000:00:1f.2: version 2.2
[ 4.220000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 4.220000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match
[ 4.528000] usb 7-6: new high speed USB device using ehci_hcd and address 2
[ 4.664000] usb 7-6: configuration #1 chosen from 1 choice
[ 5.224000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 5.224000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.224000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.224000] scsi0 : ahci
[ 5.224000] scsi1 : ahci
[ 5.224000] scsi2 : ahci
[ 5.224000] ata1: SATA max UDMA/133 cmd 0xf8856900 ctl 0x00000000 bmdma 0x00000000 irq 17
[ 5.224000] ata2: DUMMY
[ 5.224000] ata3: SATA max UDMA/133 cmd 0xf8856a00 ctl 0x00000000 bmdma 0x00000000 irq 17
[ 5.744000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.744000] ata1.00: ATA-7: ST9160821AS, 3.CDE, max UDMA/133
[ 5.744000] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 5.744000] ata1.00: configured for UDMA/133
[ 6.088000] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.088000] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.CD PQ: 0 ANSI: 5
[ 6.088000] ata_piix 0000:00:1f.1: version 2.11
[ 6.088000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.088000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.088000] scsi3 : ata_piix
[ 6.088000] scsi4 : ata_piix
[ 6.088000] ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016fa0 irq 14
[ 6.088000] ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016fa8 irq 15
[ 6.092000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 6.092000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.092000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.092000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.092000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 6.092000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.092000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.092000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.092000] sda: sda1 sda2 sda3 < sda5 >
[ 6.116000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.120000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.348000] kjournald starting. Commit interval 5 seconds
[ 6.348000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.424000] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33
[ 6.612000] ata4.00: configured for UDMA/33
[ 6.612000] ata5: port disabled. ignoring.
[ 6.612000] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5
[ 6.612000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 6.612000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 6.664000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9bfd800-f9bfdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 6.668000] b44.c:v1.01 (Jun 16, 2006)
[ 6.668000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 6.672000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:1d:09:a5:1d:62
[ 7.940000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[354fc00013a3b070]
[ 11.588000] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
[ 12.688000] input: PC Speaker as /class/input/input2
[ 12.708000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.712000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.752000] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.852000] sdhci: Secure Digital Host Controller Interface driver
[ 12.852000] sdhci: Copyright(c) Pierre Ossman
[ 12.852000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
[ 12.852000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22
[ 12.852000] mmc0: SDHCI at 0xf9bfd400 irq 22 DMA
[ 12.860000] ieee80211_crypt: registered algorithm 'NULL'
[ 12.892000] nvidia: module license 'NVIDIA' taints kernel.
[ 13.148000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.148000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 13.148000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 13.236000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 13.236000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 13.308000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000
[ 13.308000] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 13.316000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 13.316000] Uniform CD-ROM driver Revision: 3.20
[ 13.316000] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 13.328000] NET: Registered protocol family 17
[ 13.344000] Linux video capture interface: v2.00
[ 13.344000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 13.460000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 13.460000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 13.460000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.460000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 13.460000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 13.496000] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 13.496000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 13.556000] usbcore: registered new interface driver uvcvideo
[ 13.556000] USB Video Class driver (v0.1.0)
[ 13.864000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 13.864000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.092000] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:558: hda_intel: azx_get_response timeout, switching to polling mode...
[ 15.408000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 15.636000] ieee80211_crypt: registered algorithm 'WEP'
[ 16.096000] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:564: hda_intel: azx_get_response timeout, switching to single_cmd mode...
[ 16.344000] lp: driver loaded but no devices found
[ 16.732000] EXT3 FS on sda2, internal journal
[ 17.364000] kjournald starting. Commit interval 5 seconds
[ 17.364000] EXT3 FS on sda5, internal journal
[ 17.364000] EXT3-fs: mounted filesystem with ordered data mode.
Andy Mack
Level 3
Level 3
 
Posts: 118
Joined: Thu Feb 14, 2008 8:11 pm


Return to Installation & Boot

Who is online

Users browsing this forum: Bing [Bot], mintreboot and 12 guests