Bootup Log?

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read this

Bootup Log?

Postby Andy Mack on Sun Mar 16, 2008 10:22 am

Hiya, i seem to be getting some errors I think upon booting.

The splash screen schows as normal when booting but just before gnome pops up i get messages that I'm unable to read as they appear and disappear within seconds.
Is there a log file of what that was somewhere?

It mentions something about network applet hal something something then IPV6 I think. Sorry it's not much info but It's too quick to read and take in.
I use wireless ETH1 all the time, very rarely use ethernet and wondered if it's looking at ETH0, not finding anything and reporting?

Thanks
Andy
Andy Mack
Level 3
Level 3
 
Posts: 118
Joined: Thu Feb 14, 2008 8:11 pm

Linux Mint is funded by ads and donations.
 

Re: Bootup Log?

Postby Dennis99 on Sun Mar 16, 2008 10:36 am

Look in /var/log/boot and var/log/dmesg and /var/log/messages
User avatar
Dennis99
Level 2
Level 2
 
Posts: 54
Joined: Wed Mar 12, 2008 3:57 pm
Location: Gorleston, Norfolk, UK

Re: Bootup Log?

Postby Andy Mack on Sun Mar 16, 2008 11:09 am

Boot says: Nothing has been logged yet.
Dmesg is long as hell, I'll post it but what I see upon booting isn't shown in dmesg. Some things I have noticed mention Not Found.

[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe92400 (usable)
[ 0.000000] BIOS-e820: 00000000bfe92400 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 786066) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 786066
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 786066
[ 0.000000] On node 0 totalpages: 786066
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4349 pages used for memmap
[ 0.000000] HighMem zone: 552341 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FBBF0 checksum 0
[ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT BFE93E00, 005C (r1 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: FACP BFE93C9C, 00F4 (r4 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: DSDT BFE94400, 565E (r2 INT430 SYSFexxx 1001 INTL 20050624)
[ 0.000000] ACPI: FACS BFEA2C00, 0040
[ 0.000000] ACPI: HPET BFE93F00, 0038 (r1 DELL M08 1 ASL 61)
[ 0.000000] ACPI: APIC BFE94000, 0068 (r1 DELL M08 27D70802 ASL 47)
[ 0.000000] ACPI: MCFG BFE93FC0, 003E (r16 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: SLIC BFE9409C, 0176 (r1 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: BOOT BFE93BC0, 0028 (r1 DELL M08 27D70802 ASL 61)
[ 0.000000] ACPI: SSDT BFE925BC, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:34000000)
[ 0.000000] Built 1 zonelists. Total pages: 779925
[ 0.000000] Kernel command line: root=/dev/sda2 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1994.644 MHz processor.
[ 8.511115] Console: colour VGA+ 80x25
[ 8.511375] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 8.511640] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 8.631415] Memory: 3104652k/3144264k available (2015k kernel code, 38344k reserved, 915k data, 364k init, 2226760k highmem)
[ 8.631422] virtual kernel memory layout:
[ 8.631423] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 8.631424] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 8.631425] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 8.631426] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 8.631427] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 8.631428] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 8.631429] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 8.631432] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 8.631464] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 8.631591] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 8.631595] hpet0: 3 64-bit timers, 14318180 Hz
[ 8.712548] Calibrating delay using timer specific routine.. 3993.44 BogoMIPS (lpj=7986898)
[ 8.712567] Security Framework v1.0.0 initialized
[ 8.712572] SELinux: Disabled at boot.
[ 8.712583] Mount-cache hash table entries: 512
[ 8.712692] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 8.712699] monitor/mwait feature present.
[ 8.712700] using mwait in idle threads.
[ 8.712704] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 8.712707] CPU: L2 cache: 2048K
[ 8.712709] CPU: Physical Processor ID: 0
[ 8.712710] CPU: Processor Core ID: 0
[ 8.712712] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 8.712720] Compat vDSO mapped to ffffe000.
[ 8.712731] Checking 'hlt' instruction... OK.
[ 8.728626] SMP alternatives: switching to UP code
[ 8.728988] Early unpacking initramfs... done
[ 9.051158] ACPI: Core revision 20070126
[ 9.051195] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 9.054610] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 9.054623] SMP alternatives: switching to SMP code
[ 9.054686] Booting processor 1/1 eip 3000
[ 9.064871] Initializing CPU#1
[ 9.144177] Calibrating delay using timer specific routine.. 3988.87 BogoMIPS (lpj=7977757)
[ 9.144183] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 9.144187] monitor/mwait feature present.
[ 9.144189] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 9.144191] CPU: L2 cache: 2048K
[ 9.144193] CPU: Physical Processor ID: 0
[ 9.144194] CPU: Processor Core ID: 1
[ 9.144195] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 9.144661] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 9.144683] Total of 2 processors activated (7982.32 BogoMIPS).
[ 9.144879] ENABLING IO-APIC IRQs
[ 9.145076] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 9.292130] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 9.312128] Brought up 2 CPUs
[ 9.358356] migration_cost=20
[ 9.358462] Booting paravirtualized kernel on bare hardware
[ 9.358547] Time: 13:59:14 Date: 02/16/108
[ 9.358565] NET: Registered protocol family 16
[ 9.358632] EISA bus registered
[ 9.358636] ACPI: bus type pci registered
[ 9.369198] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=14
[ 9.369200] PCI: Using configuration type 1
[ 9.369201] Setting up standard PCI resources
[ 9.376359] ACPI: EC: Look up EC in DSDT
[ 9.420849] ACPI: Interpreter enabled
[ 9.420852] ACPI: (supports S0 S3 S4 S5)
[ 9.420865] ACPI: Using IOAPIC for interrupt routing
[ 9.440944] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 9.440957] PCI: Probing PCI hardware (bus 00)
[ 9.443216] PCI: Transparent bridge - 0000:00:1e.0
[ 9.443303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 9.443693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 9.443825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 9.443914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 9.444023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 9.444128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 9.453856] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
[ 9.453959] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 9.454058] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 9.454158] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 9.454258] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 9.454360] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 9.454461] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 9.454554] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 9.454667] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 9.454677] pnp: PnP ACPI init
[ 9.454686] ACPI: bus type pnp registered
[ 9.490930] pnp: PnP ACPI: found 12 devices
[ 9.490932] ACPI: ACPI bus type pnp unregistered
[ 9.490935] PnPBIOS: Disabled by ACPI PNP
[ 9.490971] PCI: Using ACPI for IRQ routing
[ 9.490974] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 9.549772] NET: Registered protocol family 8
[ 9.549774] NET: Registered protocol family 20
[ 9.549816] pnp: 00:05: ioport range 0xc80-0xcff could not be reserved
[ 9.549823] pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 9.549827] pnp: 00:09: ioport range 0x900-0x97f has been reserved
[ 9.549829] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 9.549831] pnp: 00:09: ioport range 0x1000-0x1005 has been reserved
[ 9.549834] pnp: 00:09: ioport range 0x1008-0x100f has been reserved
[ 9.549838] pnp: 00:0a: ioport range 0xf400-0xf4fe has been reserved
[ 9.549840] pnp: 00:0a: ioport range 0x1006-0x1007 has been reserved
[ 9.549843] pnp: 00:0a: ioport range 0x100a-0x1059 could not be reserved
[ 9.549845] pnp: 00:0a: ioport range 0x1060-0x107f has been reserved
[ 9.549847] pnp: 00:0a: ioport range 0x1080-0x10bf has been reserved
[ 9.549850] pnp: 00:0a: ioport range 0x10c0-0x10df has been reserved
[ 9.549852] pnp: 00:0a: ioport range 0x1010-0x102f has been reserved
[ 9.549856] pnp: 00:0b: iomem range 0x0-0x9efff could not be reserved
[ 9.549859] pnp: 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
[ 9.549861] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 9.549864] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 9.551840] Time: tsc clocksource has been installed.
[ 9.551852] Switched to high resolution mode on CPU 0
[ 9.551921] Switched to high resolution mode on CPU 1
[ 9.580087] PCI: Bridge: 0000:00:01.0
[ 9.580090] IO window: e000-efff
[ 9.580093] MEM window: fa000000-feafffff
[ 9.580096] PREFETCH window: e0000000-efffffff
[ 9.580099] PCI: Bridge: 0000:00:1c.0
[ 9.580101] IO window: disabled.
[ 9.580106] MEM window: disabled.
[ 9.580110] PREFETCH window: disabled.
[ 9.580116] PCI: Bridge: 0000:00:1c.1
[ 9.580117] IO window: disabled.
[ 9.580123] MEM window: f9f00000-f9ffffff
[ 9.580128] PREFETCH window: disabled.
[ 9.580133] PCI: Bridge: 0000:00:1c.3
[ 9.580136] IO window: d000-dfff
[ 9.580142] MEM window: f9c00000-f9efffff
[ 9.580147] PREFETCH window: f0000000-f01fffff
[ 9.580153] PCI: Bridge: 0000:00:1e.0
[ 9.580154] IO window: disabled.
[ 9.580160] MEM window: f9b00000-f9bfffff
[ 9.580164] PREFETCH window: disabled.
[ 9.580180] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.580184] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 9.580207] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.580212] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 9.580236] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 9.580242] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 9.580266] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 9.580272] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 9.580286] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 9.580295] NET: Registered protocol family 2
[ 9.631760] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.631808] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 9.632389] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 9.632593] TCP: Hash tables configured (established 131072 bind 65536)
[ 9.632596] TCP reno registered
[ 9.647854] checking if image is initramfs... it is
[ 10.285759] Freeing initrd memory: 9004k freed
[ 10.285857] Simple Boot Flag at 0x79 set to 0x1
[ 10.286254] audit: initializing netlink socket (disabled)
[ 10.286267] audit(1205675954.296:1): initialized
[ 10.286345] highmem bounce pool size: 64 pages
[ 10.287872] VFS: Disk quotas dquot_6.5.1
[ 10.287909] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.287978] io scheduler noop registered
[ 10.287980] io scheduler anticipatory registered
[ 10.287982] io scheduler deadline registered
[ 10.287993] io scheduler cfq registered (default)
[ 10.288127] Boot video device is 0000:01:00.0
[ 10.288197] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 10.288232] assign_interrupt_mode Found MSI capability
[ 10.288234] Allocate Port Service[0000:00:01.0:pcie00]
[ 10.288261] Allocate Port Service[0000:00:01.0:pcie02]
[ 10.288328] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.288387] assign_interrupt_mode Found MSI capability
[ 10.288389] Allocate Port Service[0000:00:1c.0:pcie00]
[ 10.288413] Allocate Port Service[0000:00:1c.0:pcie02]
[ 10.288507] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 10.288566] assign_interrupt_mode Found MSI capability
[ 10.288568] Allocate Port Service[0000:00:1c.1:pcie00]
[ 10.288593] Allocate Port Service[0000:00:1c.1:pcie02]
[ 10.288686] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 10.288745] assign_interrupt_mode Found MSI capability
[ 10.288747] Allocate Port Service[0000:00:1c.3:pcie00]
[ 10.288770] Allocate Port Service[0000:00:1c.3:pcie02]
[ 10.288915] isapnp: Scanning for PnP cards...
[ 10.642719] isapnp: No Plug & Play device found
[ 10.659460] Real Time Clock Driver v1.12ac
[ 10.659582] hpet_resources: 0xfed00000 is busy
[ 10.659638] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 10.660487] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 10.660589] input: Macintosh mouse button emulation as /class/input/input0
[ 10.660651] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 10.663785] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.663789] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.663885] mice: PS/2 mouse device common for all mice
[ 10.663966] EISA: Probing bus 0 at eisa.0
[ 10.663973] Cannot allocate resource for EISA slot 1
[ 10.664005] EISA: Detected 0 cards.
[ 10.664076] TCP cubic registered
[ 10.664086] NET: Registered protocol family 1
[ 10.664102] Using IPI No-Shortcut mode
[ 10.664251] Magic number: 0:5:989
[ 10.664256] hash matches device ttyd2
[ 10.664511] Freeing unused kernel memory: 364k freed
[ 10.667003] input: AT Translated Set 2 keyboard as /class/input/input1
[ 11.834010] fuse init (API version 7.8)
[ 11.838109] Capability LSM initialized
[ 11.844621] ACPI: SSDT BFE930F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 11.844795] ACPI: SSDT BFE92A88, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 11.845035] Monitor-Mwait will be used to enter C-1 state
[ 11.845038] Monitor-Mwait will be used to enter C-2 state
[ 11.845040] Monitor-Mwait will be used to enter C-3 state
[ 11.845044] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 11.845048] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 11.845233] ACPI: SSDT BFE93378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 11.845394] ACPI: SSDT BFE9306D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 11.845665] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 11.845669] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.092000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.096000] Time: hpet clocksource has been installed.
[ 3.096000] ACPI: Thermal Zone [THM] (51 C)
[ 3.484000] usbcore: registered new interface driver usbfs
[ 3.484000] usbcore: registered new interface driver hub
[ 3.484000] usbcore: registered new device driver usb
[ 3.484000] USB Universal Host Controller Interface driver v3.0
[ 3.484000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.484000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.484000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.484000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.484000] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20
[ 3.484000] usb usb1: configuration #1 chosen from 1 choice
[ 3.484000] hub 1-0:1.0: USB hub found
[ 3.484000] hub 1-0:1.0: 2 ports detected
[ 3.512000] SCSI subsystem initialized
[ 3.524000] libata version 2.21 loaded.
[ 3.588000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 3.588000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.588000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.588000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.588000] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00
[ 3.588000] usb usb2: configuration #1 chosen from 1 choice
[ 3.588000] hub 2-0:1.0: USB hub found
[ 3.588000] hub 2-0:1.0: 2 ports detected
[ 3.692000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.692000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.692000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.692000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 3.692000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80
[ 3.692000] usb usb3: configuration #1 chosen from 1 choice
[ 3.692000] hub 3-0:1.0: USB hub found
[ 3.692000] hub 3-0:1.0: 2 ports detected
[ 3.796000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 3.796000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.796000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.796000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 3.796000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60
[ 3.796000] usb usb4: configuration #1 chosen from 1 choice
[ 3.796000] hub 4-0:1.0: USB hub found
[ 3.796000] hub 4-0:1.0: 2 ports detected
[ 3.900000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
[ 3.900000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.900000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.900000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 3.900000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40
[ 3.900000] usb usb5: configuration #1 chosen from 1 choice
[ 3.900000] hub 5-0:1.0: USB hub found
[ 3.900000] hub 5-0:1.0: 2 ports detected
[ 4.004000] Clocksource tsc unstable (delta = -251461252 ns)
[ 4.004000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21
[ 4.004000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 4.004000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.004000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 4.004000] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.004000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 4.004000] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400
[ 4.008000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.008000] usb usb6: configuration #1 chosen from 1 choice
[ 4.008000] hub 6-0:1.0: USB hub found
[ 4.008000] hub 6-0:1.0: 4 ports detected
[ 4.112000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 4.112000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.112000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.112000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 4.112000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.112000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.112000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000
[ 4.116000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.116000] usb usb7: configuration #1 chosen from 1 choice
[ 4.116000] hub 7-0:1.0: USB hub found
[ 4.116000] hub 7-0:1.0: 6 ports detected
[ 4.220000] ahci 0000:00:1f.2: version 2.2
[ 4.220000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 4.220000] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match
[ 4.528000] usb 7-6: new high speed USB device using ehci_hcd and address 2
[ 4.664000] usb 7-6: configuration #1 chosen from 1 choice
[ 5.224000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 5.224000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 5.224000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.224000] scsi0 : ahci
[ 5.224000] scsi1 : ahci
[ 5.224000] scsi2 : ahci
[ 5.224000] ata1: SATA max UDMA/133 cmd 0xf8856900 ctl 0x00000000 bmdma 0x00000000 irq 17
[ 5.224000] ata2: DUMMY
[ 5.224000] ata3: SATA max UDMA/133 cmd 0xf8856a00 ctl 0x00000000 bmdma 0x00000000 irq 17
[ 5.744000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.744000] ata1.00: ATA-7: ST9160821AS, 3.CDE, max UDMA/133
[ 5.744000] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 5.744000] ata1.00: configured for UDMA/133
[ 6.088000] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.088000] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.CD PQ: 0 ANSI: 5
[ 6.088000] ata_piix 0000:00:1f.1: version 2.11
[ 6.088000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.088000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 6.088000] scsi3 : ata_piix
[ 6.088000] scsi4 : ata_piix
[ 6.088000] ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016fa0 irq 14
[ 6.088000] ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016fa8 irq 15
[ 6.092000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 6.092000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.092000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.092000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.092000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 6.092000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.092000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.092000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.092000] sda: sda1 sda2 sda3 < sda5 >
[ 6.116000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.120000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.348000] kjournald starting. Commit interval 5 seconds
[ 6.348000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.424000] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33
[ 6.612000] ata4.00: configured for UDMA/33
[ 6.612000] ata5: port disabled. ignoring.
[ 6.612000] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5
[ 6.612000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 6.612000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 6.664000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9bfd800-f9bfdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 6.668000] b44.c:v1.01 (Jun 16, 2006)
[ 6.668000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 6.672000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:1d:09:a5:1d:62
[ 7.940000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[354fc00013a3b070]
[ 11.588000] b44: eth0: BUG! Timeout waiting for bit 00000002 of register 42c to clear.
[ 12.688000] input: PC Speaker as /class/input/input2
[ 12.708000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.712000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.752000] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.852000] sdhci: Secure Digital Host Controller Interface driver
[ 12.852000] sdhci: Copyright(c) Pierre Ossman
[ 12.852000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
[ 12.852000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22
[ 12.852000] mmc0: SDHCI at 0xf9bfd400 irq 22 DMA
[ 12.860000] ieee80211_crypt: registered algorithm 'NULL'
[ 12.892000] nvidia: module license 'NVIDIA' taints kernel.
[ 13.148000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.148000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 13.148000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 13.236000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 13.236000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 13.308000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000
[ 13.308000] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 13.316000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 13.316000] Uniform CD-ROM driver Revision: 3.20
[ 13.316000] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 13.328000] NET: Registered protocol family 17
[ 13.344000] Linux video capture interface: v2.00
[ 13.344000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 13.460000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 13.460000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 13.460000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 13.460000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 13.460000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 13.496000] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 13.496000] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 13.556000] usbcore: registered new interface driver uvcvideo
[ 13.556000] USB Video Class driver (v0.1.0)
[ 13.864000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 13.864000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.092000] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:558: hda_intel: azx_get_response timeout, switching to polling mode...
[ 15.408000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 15.636000] ieee80211_crypt: registered algorithm 'WEP'
[ 16.096000] ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:564: hda_intel: azx_get_response timeout, switching to single_cmd mode...
[ 16.344000] lp: driver loaded but no devices found
[ 16.732000] EXT3 FS on sda2, internal journal
[ 17.364000] kjournald starting. Commit interval 5 seconds
[ 17.364000] EXT3 FS on sda5, internal journal
[ 17.364000] EXT3-fs: mounted filesystem with ordered data mode.
Andy Mack
Level 3
Level 3
 
Posts: 118
Joined: Thu Feb 14, 2008 8:11 pm


Return to Installation & Boot

Who is online

Users browsing this forum: Google [Bot] and 10 guests