Installer crashed! Couldn't install LinuxMint

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read this

Installer crashed! Couldn't install LinuxMint

Postby detto on Fri Mar 09, 2007 5:50 pm

Well, installer crashed and reported what i should do. copy paste and also paste /var/log/syslog and another one.
did so, i uploaded the file. hope someone can help out to install linuxmint. :roll:
http://www.kram-hochladen.de/download.php?id=NTAyODc=
detto
Level 1
Level 1
 
Posts: 1
Joined: Fri Mar 09, 2007 5:45 pm

Linux Mint is funded by ads and donations.
 

Postby Husse on Sat Mar 10, 2007 7:40 am

Post your problem in the forum pls. Just checked your link and it contains a link to "bin file" Not happy to handle such a file from an unknown source.
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19710
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Postby detto on Mon Mar 12, 2007 12:33 pm

It's a regular text file! :shock:
But if I really should post it, here we go:
[quote]
Traceback (most recent call last):
File "/usr/bin/ubiquity", line 166, in ?
main()
File "/usr/bin/ubiquity", line 161, in main
install(sys.argv[1])
File "/usr/bin/ubiquity", line 57, in install
ret = wizard.run()
File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 305, in run
self.process_step()
File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 856, in process_step
self.progress_loop()
File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 628, in progress_loop
raise RuntimeError, ("Install failed with exit code %s\n%s" %
RuntimeError: Install failed with exit code 1
Traceback (most recent call last):
File "/usr/share/ubiquity/install.py", line 1404, in ?
install.run()
File "/usr/share/ubiquity/install.py", line 355, in run
self.install_language_packs()
File "/usr/share/ubiquity/install.py", line 836, in install_language_packs
self.mark_install(cache, lp)
File "/usr/share/ubiquity/install.py", line 763, in mark_install
assert cache._depcache.BrokenCount == 0
AssertionError

Mar 9 21:26:24 mint syslogd 1.4.1#18ubuntu6: restart.
Mar 9 21:26:25 mint kernel: Inspecting /boot/System.map-2.6.17-10-generic
Mar 9 21:26:25 mint kernel: Loaded 22826 symbols from /boot/System.map-2.6.17-10-generic.
Mar 9 21:26:25 mint kernel: Symbols match kernel version 2.6.17.
Mar 9 21:26:25 mint kernel: No module symbols loaded - kernel modules not enabled.
Mar 9 21:26:25 mint kernel: [17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-provided physical RAM map:
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
Mar 9 21:26:25 mint kernel: [17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar 9 21:26:25 mint kernel: [17179569.184000] 127MB HIGHMEM available.
Mar 9 21:26:25 mint kernel: [17179569.184000] 896MB LOWMEM available.
Mar 9 21:26:25 mint kernel: [17179569.184000] found SMP MP-table at 000f51d0
Mar 9 21:26:25 mint kernel: [17179569.184000] On node 0 totalpages: 262128
Mar 9 21:26:25 mint kernel: [17179569.184000] DMA zone: 4096 pages, LIFO batch:0
Mar 9 21:26:25 mint kernel: [17179569.184000] Normal zone: 225280 pages, LIFO batch:31
Mar 9 21:26:25 mint kernel: [17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
Mar 9 21:26:25 mint kernel: [17179569.184000] DMI 2.3 present.
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f6b50
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7d40
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7cc0
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: PM-Timer IO Port: 0x1008
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: Local APIC address 0xfee00000
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 9 21:26:25 mint kernel: [17179569.184000] Processor #0 15:15 APIC version 16
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 9 21:26:25 mint kernel: [17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: IRQ9 used by override.
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: IRQ14 used by override.
Mar 9 21:26:25 mint kernel: [17179569.184000] ACPI: IRQ15 used by override.
Mar 9 21:26:25 mint kernel: [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
Mar 9 21:26:25 mint kernel: [17179569.184000] Using ACPI (MADT) for SMP configuration information
Mar 9 21:26:25 mint kernel: [17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:90000000)
Mar 9 21:26:25 mint kernel: [17179569.184000] Built 1 zonelists
Mar 9 21:26:25 mint kernel: [17179569.184000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- console-setup/layoutcode=de
Mar 9 21:26:25 mint kernel: [17179569.184000] mapped APIC to ffffd000 (fee00000)
Mar 9 21:26:25 mint kernel: [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
Mar 9 21:26:25 mint kernel: [17179569.184000] Enabling fast FPU save and restore... done.
Mar 9 21:26:25 mint kernel: [17179569.184000] Enabling unmasked SIMD FPU exception support... done.
Mar 9 21:26:25 mint kernel: [17179569.184000] Initializing CPU#0
Mar 9 21:26:25 mint kernel: [17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Mar 9 21:26:25 mint kernel: [17179569.184000] Detected 2010.474 MHz processor.
Mar 9 21:26:25 mint kernel: [17179569.184000] Using pmtmr for high-res timesource
Mar 9 21:26:25 mint kernel: [17179569.184000] Console: colour VGA+ 80x25
Mar 9 21:26:25 mint kernel: [17179570.588000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mar 9 21:26:25 mint kernel: [17179570.588000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 9 21:26:25 mint kernel: [17179570.604000] Memory: 1029508k/1048512k available (1910k kernel code, 18328k reserved, 1070k data, 308k init, 131008k highmem)
Mar 9 21:26:25 mint kernel: [17179570.604000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 9 21:26:25 mint kernel: [17179570.684000] Calibrating delay using timer specific routine.. 4025.24 BogoMIPS (lpj=8050492)
Mar 9 21:26:25 mint kernel: [17179570.684000] Security Framework v1.0.0 initialized
Mar 9 21:26:25 mint kernel: [17179570.684000] SELinux: Disabled at boot.
Mar 9 21:26:25 mint kernel: [17179570.684000] Mount-cache hash table entries: 512
Mar 9 21:26:25 mint kernel: [17179570.684000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
Mar 9 21:26:25 mint kernel: [17179570.684000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
Mar 9 21:26:25 mint kernel: [17179570.684000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar 9 21:26:25 mint kernel: [17179570.684000] CPU: L2 Cache: 512K (64 bytes/line)
Mar 9 21:26:25 mint kernel: [17179570.684000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Mar 9 21:26:25 mint kernel: [17179570.684000] Checking 'hlt' instruction... OK.
Mar 9 21:26:25 mint kernel: [17179570.700000] SMP alternatives: switching to UP code
Mar 9 21:26:25 mint kernel: [17179570.700000] Freeing SMP alternatives: 16k freed
Mar 9 21:26:25 mint kernel: [17179570.700000] checking if image is initramfs... it is
Mar 9 21:26:25 mint kernel: [17179571.164000] Freeing initrd memory: 5558k freed
Mar 9 21:26:25 mint kernel: [17179571.164000] ACPI: Core revision 20060707
Mar 9 21:26:25 mint kernel: [17179571.164000] ACPI: Looking for DSDT ... not found!
Mar 9 21:26:25 mint kernel: [17179571.168000] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Mar 9 21:26:25 mint kernel: [17179571.168000] Total of 1 processors activated (4025.24 BogoMIPS).
Mar 9 21:26:25 mint kernel: [17179571.168000] ENABLING IO-APIC IRQs
Mar 9 21:26:25 mint kernel: [17179571.168000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Mar 9 21:26:25 mint kernel: [17179571.316000] Brought up 1 CPUs
Mar 9 21:26:25 mint kernel: [17179571.316000] migration_cost=0
Mar 9 21:26:25 mint kernel: [17179571.316000] NET: Registered protocol family 16
Mar 9 21:26:25 mint kernel: [17179571.316000] EISA bus registered
Mar 9 21:26:25 mint kernel: [17179571.316000] ACPI: bus type pci registered
Mar 9 21:26:25 mint kernel: [17179571.316000] PCI: Using MMCONFIG
Mar 9 21:26:25 mint kernel: [17179571.316000] PCI: No mmconfig possible on 0:18
Mar 9 21:26:25 mint kernel: [17179571.316000] Setting up standard PCI resources
Mar 9 21:26:25 mint kernel: [17179571.328000] ACPI: Interpreter enabled
Mar 9 21:26:25 mint kernel: [17179571.328000] ACPI: Using IOAPIC for interrupt routing
Mar 9 21:26:25 mint kernel: [17179571.328000] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 9 21:26:25 mint kernel: [17179571.328000] PCI: Probing PCI hardware (bus 00)
Mar 9 21:26:25 mint kernel: [17179571.328000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:06.0
Mar 9 21:26:25 mint kernel: [17179571.332000] PCI: Transparent bridge - 0000:00:09.0
Mar 9 21:26:25 mint kernel: [17179571.332000] Boot video device is 0000:05:00.0
Mar 9 21:26:25 mint kernel: [17179571.332000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 9 21:26:25 mint kernel: [17179571.384000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Mar 9 21:26:25 mint kernel: [17179571.384000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 *12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.388000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.392000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.396000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Mar 9 21:26:25 mint kernel: [17179571.396000] Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 9 21:26:25 mint kernel: [17179571.396000] pnp: PnP ACPI init
Mar 9 21:26:25 mint kernel: [17179571.400000] pnp: PnP ACPI: found 14 devices
Mar 9 21:26:25 mint kernel: [17179571.400000] PnPBIOS: Disabled by ACPI PNP
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Using ACPI for IRQ routing
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Mar 9 21:26:25 mint kernel: [17179571.400000] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
Mar 9 21:26:25 mint kernel: [17179571.400000] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
Mar 9 21:26:25 mint kernel: [17179571.400000] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
Mar 9 21:26:25 mint kernel: [17179571.400000] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
Mar 9 21:26:25 mint kernel: [17179571.400000] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
Mar 9 21:26:25 mint kernel: [17179571.400000] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Bridge: 0000:00:09.0
Mar 9 21:26:25 mint kernel: [17179571.400000] IO window: a000-afff
Mar 9 21:26:25 mint kernel: [17179571.400000] MEM window: f0000000-f1ffffff
Mar 9 21:26:25 mint kernel: [17179571.400000] PREFETCH window: 50000000-500fffff
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Bridge: 0000:00:0b.0
Mar 9 21:26:25 mint kernel: [17179571.400000] IO window: 9000-9fff
Mar 9 21:26:25 mint kernel: [17179571.400000] MEM window: disabled.
Mar 9 21:26:25 mint kernel: [17179571.400000] PREFETCH window: disabled.
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Bridge: 0000:00:0c.0
Mar 9 21:26:25 mint kernel: [17179571.400000] IO window: 8000-8fff
Mar 9 21:26:25 mint kernel: [17179571.400000] MEM window: disabled.
Mar 9 21:26:25 mint kernel: [17179571.400000] PREFETCH window: disabled.
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Bridge: 0000:00:0d.0
Mar 9 21:26:25 mint kernel: [17179571.400000] IO window: 7000-7fff
Mar 9 21:26:25 mint kernel: [17179571.400000] MEM window: disabled.
Mar 9 21:26:25 mint kernel: [17179571.400000] PREFETCH window: disabled.
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Bridge: 0000:00:0e.0
Mar 9 21:26:25 mint kernel: [17179571.400000] IO window: disabled.
Mar 9 21:26:25 mint kernel: [17179571.400000] MEM window: e8000000-efffffff
Mar 9 21:26:25 mint kernel: [17179571.400000] PREFETCH window: e0000000-e7ffffff
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Setting latency timer of device 0000:00:09.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.400000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.400000] NET: Registered protocol family 2
Mar 9 21:26:25 mint kernel: [17179571.440000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 9 21:26:25 mint kernel: [17179571.440000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Mar 9 21:26:25 mint kernel: [17179571.440000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Mar 9 21:26:25 mint kernel: [17179571.440000] TCP: Hash tables configured (established 131072 bind 65536)
Mar 9 21:26:25 mint kernel: [17179571.440000] TCP reno registered
Mar 9 21:26:25 mint kernel: [17179571.440000] audit: initializing netlink socket (disabled)
Mar 9 21:26:25 mint kernel: [17179571.440000] audit(1173475633.440:1): initialized
Mar 9 21:26:25 mint kernel: [17179571.440000] highmem bounce pool size: 64 pages
Mar 9 21:26:25 mint kernel: [17179571.440000] VFS: Disk quotas dquot_6.5.1
Mar 9 21:26:25 mint kernel: [17179571.440000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 9 21:26:25 mint kernel: [17179571.440000] Initializing Cryptographic API
Mar 9 21:26:25 mint kernel: [17179571.440000] io scheduler noop registered
Mar 9 21:26:25 mint kernel: [17179571.440000] io scheduler anticipatory registered
Mar 9 21:26:25 mint kernel: [17179571.440000] io scheduler deadline registered
Mar 9 21:26:25 mint kernel: [17179571.440000] io scheduler cfq registered (default)
Mar 9 21:26:25 mint kernel: [17179571.440000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.440000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Mar 9 21:26:25 mint kernel: [17179571.440000] assign_interrupt_mode Found MSI capability
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0b.0:pcie00]
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0b.0:pcie03]
Mar 9 21:26:25 mint kernel: [17179571.440000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.440000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Mar 9 21:26:25 mint kernel: [17179571.440000] assign_interrupt_mode Found MSI capability
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0c.0:pcie00]
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0c.0:pcie03]
Mar 9 21:26:25 mint kernel: [17179571.440000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.440000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Mar 9 21:26:25 mint kernel: [17179571.440000] assign_interrupt_mode Found MSI capability
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0d.0:pcie00]
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0d.0:pcie03]
Mar 9 21:26:25 mint kernel: [17179571.440000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Mar 9 21:26:25 mint kernel: [17179571.440000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Mar 9 21:26:25 mint kernel: [17179571.440000] assign_interrupt_mode Found MSI capability
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0e.0:pcie00]
Mar 9 21:26:25 mint kernel: [17179571.440000] Allocate Port Service[0000:00:0e.0:pcie03]
Mar 9 21:26:25 mint kernel: [17179571.440000] isapnp: Scanning for PnP cards...
Mar 9 21:26:25 mint kernel: [17179571.792000] isapnp: No Plug & Play device found
Mar 9 21:26:25 mint kernel: [17179571.808000] Real Time Clock Driver v1.12ac
Mar 9 21:26:25 mint kernel: [17179571.808000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Mar 9 21:26:25 mint kernel: [17179571.808000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 9 21:26:25 mint kernel: [17179571.808000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Mar 9 21:26:25 mint kernel: [17179571.812000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 9 21:26:25 mint kernel: [17179571.812000] mice: PS/2 mouse device common for all mice
Mar 9 21:26:25 mint kernel: [17179571.812000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
Mar 9 21:26:25 mint kernel: [17179571.812000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 9 21:26:25 mint kernel: [17179571.812000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 9 21:26:25 mint kernel: [17179571.812000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar 9 21:26:25 mint kernel: [17179571.812000] PNP: PS/2 controller doesn't have AUX irq; using default 12
Mar 9 21:26:25 mint kernel: [17179571.812000] serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 9 21:26:25 mint kernel: [17179571.812000] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 9 21:26:25 mint kernel: [17179571.812000] EISA: Probing bus 0 at eisa.0
Mar 9 21:26:25 mint kernel: [17179571.812000] Cannot allocate resource for EISA slot 1
Mar 9 21:26:25 mint kernel: [17179571.812000] Cannot allocate resource for EISA slot 7
Mar 9 21:26:25 mint kernel: [17179571.812000] Cannot allocate resource for EISA slot 8
Mar 9 21:26:25 mint kernel: [17179571.812000] EISA: Detected 0 cards.
Mar 9 21:26:25 mint kernel: [17179571.812000] TCP bic registered
Mar 9 21:26:25 mint kernel: [17179571.812000] NET: Registered protocol family 1
Mar 9 21:26:25 mint kernel: [17179571.812000] NET: Registered protocol family 8
Mar 9 21:26:25 mint kernel: [17179571.812000] NET: Registered protocol family 20
Mar 9 21:26:25 mint kernel: [17179571.812000] Using IPI No-Shortcut mode
Mar 9 21:26:25 mint kernel: [17179571.812000] ACPI: (supports S0 S1 S4 S5)
Mar 9 21:26:25 mint kernel: [17179571.812000] Freeing unused kernel memory: 308k freed
Mar 9 21:26:25 mint kernel: [17179572.156000] input: AT Translated Set 2 keyboard as /class/input/input0
Mar 9 21:26:25 mint kernel: [17179573.168000] Capability LSM initialized
Mar 9 21:26:25 mint kernel: [17179573.200000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
Mar 9 21:26:25 mint kernel: [17179573.200000] ACPI: Getting cpuindex for acpiid 0x1
Mar 9 21:26:25 mint kernel: [17179573.556000] SCSI subsystem initialized
Mar 9 21:26:25 mint kernel: [17179573.556000] libata version 1.20 loaded.
Mar 9 21:26:25 mint kernel: [17179573.560000] sata_nv 0000:00:07.0: version 0.8
Mar 9 21:26:25 mint kernel: [17179573.560000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
Mar 9 21:26:25 mint kernel: [17179573.560000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
Mar 9 21:26:25 mint kernel: [17179573.560000] PCI: Setting latency timer of device 0000:00:07.0 to 64
Mar 9 21:26:25 mint kernel: [17179573.560000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD000 irq 217
Mar 9 21:26:25 mint kernel: [17179573.560000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD008 irq 217
Mar 9 21:26:25 mint kernel: [17179573.764000] ata1: SATA link up 1.5 Gbps (SStatus 113)
Mar 9 21:26:25 mint kernel: [17179574.060000] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:407f
Mar 9 21:26:25 mint kernel: [17179574.060000] ata1: dev 0 ATA-6, max UDMA/133, 390719855 sectors: LBA48
Mar 9 21:26:25 mint kernel: [17179574.060000] nv_sata: Primary device added
Mar 9 21:26:25 mint kernel: [17179574.060000] nv_sata: Primary device removed
Mar 9 21:26:25 mint kernel: [17179574.060000] nv_sata: Secondary device added
Mar 9 21:26:25 mint kernel: [17179574.060000] nv_sata: Secondary device removed
Mar 9 21:26:25 mint kernel: [17179574.072000] ata1: dev 0 configured for UDMA/133
Mar 9 21:26:25 mint kernel: [17179574.072000] scsi0 : sata_nv
Mar 9 21:26:25 mint kernel: [17179574.276000] ata2: SATA link down (SStatus 0)
Mar 9 21:26:25 mint kernel: [17179574.276000] scsi1 : sata_nv
Mar 9 21:26:25 mint kernel: [17179574.280000] Vendor: ATA Model: ST3200822AS Rev: 3.01
Mar 9 21:26:25 mint kernel: [17179574.280000] Type: Direct-Access ANSI SCSI revision: 05
Mar 9 21:26:25 mint kernel: [17179574.280000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
Mar 9 21:26:25 mint kernel: [17179574.280000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
Mar 9 21:26:25 mint kernel: [17179574.280000] PCI: Setting latency timer of device 0000:00:08.0 to 64
Mar 9 21:26:25 mint kernel: [17179574.280000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xE400 irq 225
Mar 9 21:26:25 mint kernel: [17179574.280000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xE408 irq 225
Mar 9 21:26:25 mint kernel: [17179574.284000] SCSI device sda: 390719855 512-byte hdwr sectors (200049 MB)
Mar 9 21:26:25 mint kernel: [17179574.284000] sda: Write Protect is off
Mar 9 21:26:25 mint kernel: [17179574.284000] sda: Mode Sense: 00 3a 00 00
Mar 9 21:26:25 mint kernel: [17179574.284000] SCSI device sda: drive cache: write back
Mar 9 21:26:25 mint kernel: [17179574.284000] SCSI device sda: 390719855 512-byte hdwr sectors (200049 MB)
Mar 9 21:26:25 mint kernel: [17179574.284000] sda: Write Protect is off
Mar 9 21:26:25 mint kernel: [17179574.284000] sda: Mode Sense: 00 3a 00 00
Mar 9 21:26:25 mint kernel: [17179574.284000] SCSI device sda: drive cache: write back
Mar 9 21:26:25 mint kernel: [17179574.284000] sda: sda1 sda2 sda3 sda4
Mar 9 21:26:25 mint kernel: [17179574.304000] sd 0:0:0:0: Attached scsi disk sda
Mar 9 21:26:25 mint kernel: [17179574.484000] ata3: SATA link down (SStatus 0)
Mar 9 21:26:25 mint kernel: [17179574.484000] scsi2 : sata_nv
Mar 9 21:26:25 mint kernel: [17179574.692000] ata4: SATA link down (SStatus 0)
Mar 9 21:26:25 mint kernel: [17179574.692000] scsi3 : sata_nv
Mar 9 21:26:25 mint kernel: [17179574.696000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
Mar 9 21:26:25 mint kernel: [17179574.696000] NFORCE-CK804: chipset revision 162
Mar 9 21:26:25 mint kernel: [17179574.696000] NFORCE-CK804: not 100%% native mode: will probe irqs later
Mar 9 21:26:25 mint kernel: [17179574.696000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
Mar 9 21:26:25 mint kernel: [17179574.696000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Mar 9 21:26:25 mint kernel: [17179574.696000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Mar 9 21:26:25 mint kernel: [17179574.696000] Probing IDE interface ide0...
Mar 9 21:26:25 mint kernel: [17179575.440000] hda: TSSTcorpCD/DVDW SH-S182M, ATAPI CD/DVD-ROM drive
Mar 9 21:26:25 mint kernel: [17179576.232000] hdb: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
Mar 9 21:26:25 mint kernel: [17179576.292000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 9 21:26:25 mint kernel: [17179576.296000] Probing IDE interface ide1...
Mar 9 21:26:25 mint kernel: [17179576.880000] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Mar 9 21:26:25 mint kernel: [17179576.880000] Uniform CD-ROM driver Revision: 3.20
Mar 9 21:26:25 mint kernel: [17179576.884000] hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Mar 9 21:26:25 mint kernel: [17179577.092000] Probing IDE interface ide1...
Mar 9 21:26:25 mint kernel: [17179577.120000] usbcore: registered new driver usbfs
Mar 9 21:26:25 mint kernel: [17179577.120000] usbcore: registered new driver hub
Mar 9 21:26:25 mint kernel: [17179577.120000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Mar 9 21:26:25 mint kernel: [17179577.120000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
Mar 9 21:26:25 mint kernel: [17179577.120000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233
Mar 9 21:26:25 mint kernel: [17179577.120000] PCI: Setting latency timer of device 0000:00:02.0 to 64
Mar 9 21:26:25 mint kernel: [17179577.120000] ohci_hcd 0000:00:02.0: OHCI Host Controller
Mar 9 21:26:25 mint kernel: [17179577.120000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Mar 9 21:26:25 mint kernel: [17179577.120000] ohci_hcd 0000:00:02.0: irq 233, io mem 0xf2002000
Mar 9 21:26:25 mint kernel: [17179577.172000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
Mar 9 21:26:25 mint kernel: [17179577.184000] ieee1394: Initialized config rom entry `ip1394'
Mar 9 21:26:25 mint kernel: [17179577.188000] usb usb1: configuration #1 chosen from 1 choice
Mar 9 21:26:25 mint kernel: [17179577.188000] hub 1-0:1.0: USB hub found
Mar 9 21:26:25 mint kernel: [17179577.188000] hub 1-0:1.0: 10 ports detected
Mar 9 21:26:25 mint kernel: [17179577.296000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Mar 9 21:26:25 mint kernel: [17179577.296000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50
Mar 9 21:26:25 mint kernel: [17179577.296000] PCI: Setting latency timer of device 0000:00:02.1 to 64
Mar 9 21:26:25 mint kernel: [17179577.296000] ehci_hcd 0000:00:02.1: EHCI Host Controller
Mar 9 21:26:25 mint kernel: [17179577.296000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Mar 9 21:26:25 mint kernel: [17179577.296000] ehci_hcd 0000:00:02.1: debug port 1
Mar 9 21:26:25 mint kernel: [17179577.296000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
Mar 9 21:26:25 mint kernel: [17179577.296000] ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000
Mar 9 21:26:25 mint kernel: [17179577.296000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar 9 21:26:25 mint kernel: [17179577.296000] usb usb2: configuration #1 chosen from 1 choice
Mar 9 21:26:25 mint kernel: [17179577.296000] hub 2-0:1.0: USB hub found
Mar 9 21:26:25 mint kernel: [17179577.296000] hub 2-0:1.0: 10 ports detected
Mar 9 21:26:25 mint kernel: [17179577.404000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
Mar 9 21:26:25 mint kernel: [17179577.404000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
Mar 9 21:26:25 mint kernel: [17179577.404000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
Mar 9 21:26:25 mint kernel: [17179577.404000] forcedeth: using HIGHDMA
Mar 9 21:26:25 mint kernel: [17179577.640000] ohci_hcd 0000:00:02.0: wakeup
Mar 9 21:26:25 mint kernel: [17179577.928000] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0
Mar 9 21:26:25 mint kernel: [17179577.928000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Mar 9 21:26:25 mint kernel: [17179577.928000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58
Mar 9 21:26:25 mint kernel: [17179577.976000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[f1004000-f10047ff] Max Packet=[4096] IR/IT contexts=[4/8]
Mar 9 21:26:25 mint kernel: [17179578.032000] usb 1-10: new low speed USB device using ohci_hcd and address 2
Mar 9 21:26:25 mint kernel: [17179578.240000] usb 1-10: configuration #1 chosen from 1 choice
Mar 9 21:26:25 mint kernel: [17179578.252000] usbcore: registered new driver hiddev
Mar 9 21:26:25 mint kernel: [17179578.260000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
Mar 9 21:26:25 mint kernel: [17179578.260000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-10
Mar 9 21:26:25 mint kernel: [17179578.260000] usbcore: registered new driver usbhid
Mar 9 21:26:25 mint kernel: [17179578.260000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar 9 21:26:25 mint kernel: [17179578.772000] ISO 9660 Extensions: Microsoft Joliet Level 3
Mar 9 21:26:25 mint kernel: [17179578.796000] ISO 9660 Extensions: RRIP_1991A
Mar 9 21:26:25 mint kernel: [17179578.820000] Registering unionfs 1.1.4
Mar 9 21:26:25 mint kernel: [17179578.828000] loop: loaded (max 8 devices)
Mar 9 21:26:25 mint kernel: [17179578.888000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
Mar 9 21:26:25 mint kernel: [17179579.260000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea56002d71e0]
Mar 9 21:26:25 mint kernel: [17179607.188000] natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
Mar 9 21:26:25 mint kernel: [17179607.188000] originally by Donald Becker <becker@scyld.com>
Mar 9 21:26:25 mint kernel: [17179607.188000] http://www.scyld.com/network/natsemi.html
Mar 9 21:26:25 mint kernel: [17179607.188000] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
Mar 9 21:26:25 mint kernel: [17179607.188000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Mar 9 21:26:25 mint kernel: [17179607.188000] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 66
Mar 9 21:26:25 mint kernel: [17179607.192000] natsemi eth1: NatSemi DP8381[56] at 0xf1005000 (0000:01:07.0), 00:09:5b:e3:6b:95, IRQ 66, port TP.
Mar 9 21:26:25 mint kernel: [17179618.084000] input: PC Speaker as /class/input/input2
Mar 9 21:26:25 mint kernel: [17179618.652000] eth0: no link during initialization.
Mar 9 21:26:25 mint kernel: [17179618.744000] Floppy drive(s): fd0 is 1.44M
Mar 9 21:26:25 mint kernel: [17179618.764000] FDC 0 is a post-1991 82077
Mar 9 21:26:25 mint kernel: [17179618.996000] irda_init()
Mar 9 21:26:25 mint kernel: [17179618.996000] NET: Registered protocol family 23
Mar 9 21:26:25 mint kernel: [17179619.396000] parport: PnPBIOS parport detected.
Mar 9 21:26:25 mint kernel: [17179619.396000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Mar 9 21:26:25 mint kernel: [17179619.560000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 9 21:26:25 mint kernel: [17179619.564000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 9 21:26:25 mint kernel: [17179619.648000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
Mar 9 21:26:25 mint kernel: [17179619.648000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
Mar 9 21:26:25 mint kernel: [17179620.476000] eth1: DSPCFG accepted after 0 usec.
Mar 9 21:26:25 mint kernel: [17179620.476000] eth1: link up.
Mar 9 21:26:25 mint kernel: [17179620.476000] eth1: Setting full-duplex based on negotiated link capability.
Mar 9 21:26:25 mint kernel: [17179620.524000] NET: Registered protocol family 17
Mar 9 21:26:25 mint kernel: [17179620.828000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Mar 9 21:26:25 mint kernel: [17179620.828000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
Mar 9 21:26:25 mint kernel: [17179620.828000] PCI: Setting latency timer of device 0000:00:04.0 to 64
Mar 9 21:26:25 mint kernel: [17179620.904000] sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 9 21:26:25 mint kernel: [17179620.960000] ts: Compaq touchscreen protocol output
Mar 9 21:26:25 mint kernel: [17179621.156000] intel8x0_measure_ac97_clock: measured 58645 usecs
Mar 9 21:26:25 mint kernel: [17179621.156000] intel8x0: clocking to 47047
Mar 9 21:26:25 mint kernel: [17179621.968000] fuse init (API version 7.6)
Mar 9 21:26:25 mint kernel: [17179628.404000] ACPI: Power Button (FF) [PWRF]
Mar 9 21:26:25 mint kernel: [17179628.404000] ACPI: Power Button (CM) [PWRB]
Mar 9 21:26:25 mint kernel: [17179629.352000] ibm_acpi: ec object not found
Mar 9 21:26:25 mint kernel: [17179629.456000] pcc_acpi: loading...
Mar 9 21:26:25 mint kernel: [17179629.956000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
Mar 9 21:26:25 mint kernel: [17179629.956000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
Mar 9 21:26:25 mint kernel: [17179629.956000] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
Mar 9 21:26:25 mint kernel: [17179629.956000] cpu_init done, current fid 0xc, vid 0x6
Mar 9 21:26:29 mint kernel: [17179635.004000] lp0: using parport0 (interrupt-driven).
Mar 9 21:26:29 mint kernel: [17179635.048000] ppdev: user-space parallel port driver
Mar 9 21:26:34 mint hpiod: 1.6.9 accepting connections at 2208...
Mar 9 21:26:36 mint kernel: [17179642.216000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Mar 9 21:26:36 mint kernel: [17179642.216000] apm: overridden by ACPI.
Mar 9 21:26:45 mint dhcdbd: Started up.
Mar 9 21:26:45 mint gconfd (mint-6079): starting (version 2.16.0), pid 6079 user 'mint'
Mar 9 21:26:45 mint gconfd (mint-6079): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Mar 9 21:26:45 mint gconfd (mint-6079): Resolved address "xml:readwrite:/home/mint/.gconf" to a writable configuration source at position 1
Mar 9 21:26:45 mint gconfd (mint-6079): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Mar 9 21:26:45 mint gconfd (mint-6079): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Mar 9 21:26:45 mint gconfd (mint-6079): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Mar 9 21:26:47 mint NetworkManager: <information>^Istarting...
Mar 9 21:26:47 mint NetworkManager: <information>^Ieth1: Device is fully-supported using driver 'natsemi'.
Mar 9 21:26:47 mint NetworkManager: <information>^Inm_device_init(): waiting for device's worker thread to start
Mar 9 21:26:47 mint NetworkManager: <information>^Inm_device_init(): device's worker thread started, continuing.
Mar 9 21:26:47 mint NetworkManager: <information>^INow managing wired Ethernet (802.3) device 'eth1'.
Mar 9 21:26:47 mint NetworkManager: <information>^IDeactivating device eth1.
Mar 9 21:26:47 mint NetworkManager: <information>^Ieth0: Device is fully-supported using driver 'forcedeth'.
Mar 9 21:26:47 mint NetworkManager: <information>^Inm_device_init(): waiting for device's worker thread to start
Mar 9 21:26:47 mint NetworkManager: <information>^Inm_device_init(): device's worker thread started, continuing.
Mar 9 21:26:47 mint NetworkManager: <information>^INow managing wired Ethernet (802.3) device 'eth0'.
Mar 9 21:26:47 mint NetworkManager: <information>^IDeactivating device eth0.
Mar 9 21:26:48 mint dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Mar 9 21:26:48 mint NetworkManager: <information>^IWill activate wired connection 'eth1' because it now has a link.
Mar 9 21:26:48 mint NetworkManager: <information>^ISWITCH: no current connection, found better connection 'eth1'.
Mar 9 21:26:48 mint dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Mar 9 21:26:48 mint NetworkManager: <information>^IWill activate connection 'eth1'.
Mar 9 21:26:48 mint NetworkManager: <information>^IDevice eth1 activation scheduled...
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) started...
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 1 of 5 (Device Prepare) started...
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 1 of 5 (Device Prepare) complete.
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 2 of 5 (Device Configure) starting...
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 2 of 5 (Device Configure) successful.
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 2 of 5 (Device Configure) complete.
Mar 9 21:26:48 mint NetworkManager: <information>^IActivation (eth1) Stage 3 of 5 (IP Configure Start) started...
Mar 9 21:26:49 mint NetworkManager: <information>^IActivation (eth1) Beginning DHCP transaction.
Mar 9 21:26:49 mint NetworkManager: <information>^IActivation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Mar 9 21:26:49 mint NetworkManager: <information>^IDHCP daemon state is now 12 (successfully started) for interface eth1
Mar 9 21:26:51 mint NetworkManager: <information>^IDHCP daemon state is now 1 (starting) for interface eth1
Mar 9 21:26:52 mint dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67
Mar 9 21:26:54 mint dhclient: DHCPACK from 192.168.2.1
Mar 9 21:26:54 mint NetworkManager: <information>^IDHCP daemon state is now 4 (reboot) for interface eth1
Mar 9 21:26:54 mint NetworkManager: <information>^IActivation (eth1) Stage 4 of 5 (IP Configure Get) scheduled...
Mar 9 21:26:54 mint NetworkManager: <information>^IActivation (eth1) Stage 4 of 5 (IP Configure Get) started...
Mar 9 21:26:54 mint dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.host_name
Mar 9 21:26:54 mint dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_domain
Mar 9 21:26:54 mint dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.nis_servers
Mar 9 21:26:54 mint NetworkManager: <information>^IRetrieved the following IP4 configuration from the DHCP daemon:
Mar 9 21:26:54 mint NetworkManager: <information>^I address 192.168.2.103
Mar 9 21:26:54 mint NetworkManager: <information>^I netmask 255.255.255.0
Mar 9 21:26:54 mint NetworkManager: <information>^I broadcast 192.168.2.255
Mar 9 21:26:54 mint NetworkManager: <information>^I gateway 192.168.2.1
Mar 9 21:26:54 mint NetworkManager: <information>^I nameserver 192.168.2.1
Mar 9 21:26:54 mint NetworkManager: <information>^I domain name 'Speedport_W_700V'
Mar 9 21:26:54 mint NetworkManager: <information>^IActivation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled...
Mar 9 21:26:54 mint NetworkManager: <information>^IActivation (eth1) Stage 4 of 5 (IP Configure Get) complete.
Mar 9 21:26:54 mint NetworkManager: <information>^IActivation (eth1) Stage 5 of 5 (IP Configure Commit) started...
Mar 9 21:26:54 mint dhclient: bound to 192.168.2.103 -- renewal in 155759 seconds.
Mar 9 21:26:55 mint NetworkManager: <information>^IDHCP returned name servers but system has disabled dynamic modification!
Mar 9 21:26:55 mint NetworkManager: <information>^IActivation (eth1) successful, device activated.
Mar 9 21:26:55 mint NetworkManager: <information>^IActivation (eth1) Finish handler scheduled.
Mar 9 21:26:55 mint NetworkManager: <information>^IActivation (eth1) Stage 5 of 5 (IP Configure Commit) complete.
Mar 9 21:26:56 mint hcid[6263]: Bluetooth HCI daemon
Mar 9 21:26:56 mint kernel: [17179661.584000] Bluetooth: Core ver 2.8
Mar 9 21:26:56 mint kernel: [17179661.584000] NET: Registered protocol family 31
Mar 9 21:26:56 mint kernel: [17179661.584000] Bluetooth: HCI device and connection manager initialized
Mar 9 21:26:56 mint kernel: [17179661.584000] Bluetooth: HCI socket layer initialized
Mar 9 21:26:56 mint kernel: [17179661.872000] Bluetooth: L2CAP ver 2.8
Mar 9 21:26:56 mint kernel: [17179661.872000] Bluetooth: L2CAP socket layer initialized
Mar 9 21:26:56 mint sdpd[6269]: Bluetooth SDP daemon
Mar 9 21:26:56 mint kernel: [17179662.024000] Bluetooth: RFCOMM socket layer initialized
Mar 9 21:26:56 mint kernel: [17179662.024000] Bluetooth: RFCOMM TTY layer initialized
Mar 9 21:26:56 mint kernel: [17179662.024000] Bluetooth: RFCOMM ver 1.7
Mar 9 21:26:56 mint hcid[6263]: Register path:/org/bluez fallback:1
Mar 9 21:26:57 mint modprobe: WARNING: Not loading blacklisted module ipv6
Mar 9 21:26:57 mint last message repeated 3 times
Mar 9 21:26:57 mint ntpdate[6262]: step time server 82.211.81.145 offset -0.002244 sec
Mar 9 21:26:58 mint /usr/sbin/cron[6324]: (CRON) INFO (pidfile fd = 3)
Mar 9 21:26:58 mint /usr/sbin/cron[6330]: (CRON) STARTUP (fork ok)
Mar 9 21:26:59 mint /usr/sbin/cron[6330]: (CRON) INFO (Running @reboot jobs)
Mar 9 21:27:01 mint gconfd (mint-3295): GConf server is not in use, shutting down.
Mar 9 21:27:01 mint gconfd (mint-3295): Exiting
Mar 9 21:27:02 mint gconfd (mint-6420): starting (version 2.16.0), pid 6420 user 'mint'
Mar 9 21:27:02 mint gconfd (mint-6420): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Mar 9 21:27:02 mint gconfd (mint-6420): Resolved address "xml:readwrite:/home/mint/.gconf" to a writable configuration source at position 1
Mar 9 21:27:02 mint gconfd (mint-6420): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Mar 9 21:27:02 mint gconfd (mint-6420): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Mar 9 21:27:02 mint gconfd (mint-6420): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Mar 9 21:27:09 mint gconfd (mint-6420): Resolved address "xml:readwrite:/home/mint/.gconf" to a writable configuration source at position 0
Mar 9 21:27:14 mint bonobo-activation-server (mint-6428): Passing command-line arguments in .server files is deprecated: "/usr/bin/tomboy --panel-applet"
Mar 9 21:27:14 mint modprobe: WARNING: Not loading blacklisted module ipv6
Mar 9 21:27:17 mint NetworkManager: <information>^IUpdating allowed wireless network lists.
Mar 9 21:27:17 mint NetworkManager: <WARNING>^I nm_dbus_get_networks_cb (): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored..
Mar 9 21:27:32 mint ubiquity[6532]: Ubiquity 1.2.6
Mar 9 21:27:35 mint ubiquity[6532]: log-output -t ubiquity laptop-detect
Mar 9 21:27:38 mint ubiquity[6532]: switched to page stepLanguage
Mar 9 21:27:38 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/localechooser/localechooser']' for ubiquity.components.language.Language
Mar 9 21:27:38 mint ubiquity[6532]: ubiquity: Watching for question patterns ^languagechooser/language-name, ^countrychooser/shortlist$
Mar 9 21:27:54 mint localechooser: info: LANGNAME=German
Mar 9 21:27:54 mint localechooser: info: line=German;1;de;DE;de_DE.UTF-8;UTF-8;;kbd=lat0-sun16(utf8)
Mar 9 21:27:54 mint localechooser: info: Set debian-installer/language = 'de'
Mar 9 21:27:54 mint localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Mar 9 21:27:54 mint localechooser: info: Set debian-installer/fallbacklocale = 'de_DE.UTF-8'
Mar 9 21:27:54 mint localechooser: info: Set debian-installer/country = 'DE'
Mar 9 21:27:54 mint localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Mar 9 21:27:54 mint localechooser: info: Set debconf/language = 'de'
Mar 9 21:27:54 mint localechooser: info: Set countrychooser/country-name = 'Germany'
Mar 9 21:27:54 mint localechooser: info: Set debian-installer/country = 'DE'
Mar 9 21:27:54 mint localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Mar 9 21:27:55 mint ubiquity[6532]: debconffilter_done: Language (current: Language)
Mar 9 21:27:55 mint ubiquity[6532]: Step_before = stepLanguage
Mar 9 21:27:56 mint ubiquity[6532]: switched to page stepLocation
Mar 9 21:27:56 mint ubiquity[6532]: Step_after = stepLocation
Mar 9 21:27:56 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/tzsetup']' for ubiquity.components.timezone.Timezone
Mar 9 21:27:56 mint ubiquity[6532]: ubiquity: Watching for question patterns ^time/zone$
Mar 9 21:28:15 mint localechooser: info: Locale has been preseeded to de_DE.UTF-8
Mar 9 21:28:15 mint localechooser: info: Set languagechooser/language-name = 'German'
Mar 9 21:28:15 mint localechooser: info: Set countrychooser/shortlist-de = 'DE'
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Mar 9 21:28:15 mint localechooser: info: LANGNAME=German
Mar 9 21:28:15 mint localechooser: info: line=German;1;de;DE;de_DE.UTF-8;UTF-8;;kbd=lat0-sun16(utf8)
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/language = 'de'
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/fallbacklocale = 'de_DE.UTF-8'
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/country = 'DE'
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Mar 9 21:28:15 mint localechooser: info: Set debconf/language = 'de'
Mar 9 21:28:15 mint localechooser: info: Set countrychooser/country-name = 'Germany'
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/country = 'DE'
Mar 9 21:28:15 mint localechooser: info: Set debian-installer/locale = 'de_DE.UTF-8'
Mar 9 21:28:16 mint ubiquity[6532]: debconffilter_done: Timezone (current: Timezone)
Mar 9 21:28:16 mint ubiquity[6532]: Step_before = stepLocation
Mar 9 21:28:16 mint ubiquity[6532]: switched to page stepKeyboardConf
Mar 9 21:28:16 mint ubiquity[6532]: Step_after = stepKeyboardConf
Mar 9 21:28:16 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/console-setup/console-setup.postinst', 'configure']' for ubiquity.components.console_setup.ConsoleSetup
Mar 9 21:28:16 mint ubiquity[6532]: ubiquity: Watching for question patterns ^console-setup/layout, ^console-setup/variant
Mar 9 21:28:17 mint ubiquity[6532]: ubiquity: Setting keyboard layout: pc105 de []
Mar 9 21:28:17 mint ubiquity[6532]: log-output -t ubiquity setxkbmap -model pc105 -layout de
Mar 9 21:28:19 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
Mar 9 21:28:19 mint ubiquity[6532]: ubiquity: Setting keyboard layout: pc105 de nodeadkeys []
Mar 9 21:28:19 mint ubiquity[6532]: log-output -t ubiquity setxkbmap -model pc105 -layout de -variant nodeadkeys
Mar 9 21:28:27 mint ubiquity: Your console configuration will be updated the next time your system boots.
Mar 9 21:28:27 mint ubiquity: If you want to update it now, run 'setupcon' from a virtual console.
Mar 9 21:28:27 mint ubiquity[6532]: log-output -t ubiquity setxkbmap -model pc105 -layout de -variant nodeadkeys -option lv3:ralt_switch
Mar 9 21:28:28 mint ubiquity[6532]: debconffilter_done: ConsoleSetup (current: ConsoleSetup)
Mar 9 21:28:28 mint ubiquity[6532]: Step_before = stepKeyboardConf
Mar 9 21:28:28 mint ubiquity[6532]: switched to page stepUserInfo
Mar 9 21:28:28 mint ubiquity[6532]: Step_after = stepUserInfo
Mar 9 21:28:28 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/user-setup/user-setup-ask', '/target']' for ubiquity.components.usersetup.UserSetup
Mar 9 21:28:28 mint ubiquity[6532]: ubiquity: Watching for question patterns ^passwd/user-fullname$, ^passwd/username$, ^passwd/user-password$, ^passwd/user-password-again$, ERROR
Mar 9 21:28:40 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16
Mar 9 21:28:49 mint ubiquity[6532]: debconffilter_done: UserSetup (current: UserSetup)
Mar 9 21:28:49 mint ubiquity[6532]: Step_before = stepUserInfo
Mar 9 21:28:49 mint ubiquity[6532]: switched to page stepPartDisk
Mar 9 21:28:49 mint ubiquity[6532]: Step_after = stepPartDisk
Mar 9 21:28:49 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman']' for ubiquity.components.partman_auto.PartmanAuto
Mar 9 21:28:49 mint ubiquity[6532]: ubiquity: Watching for question patterns ^partman-auto/select_disk$, ^partman-auto/.*automatically_partition$, ^partman-partitioning/new_size$, ^partman/choose_partition$, ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Mar 9 21:28:50 mint ubiquity: unsupported
Mar 9 21:28:50 mint ubiquity: kernelmodules_basicfilesystems
Mar 9 21:28:50 mint kernel: [17179775.784000] NTFS driver 2.1.27 [Flags: R/O MODULE].
Mar 9 21:28:50 mint ubiquity: kernelmodules_ext3
Mar 9 21:28:50 mint ubiquity: kernelmodules_jfs
Mar 9 21:28:50 mint kernel: [17179775.952000] JFS: nTxBlock = 8091, nTxLock = 64730
Mar 9 21:28:50 mint ubiquity: kernelmodules_reiserfs
Mar 9 21:28:50 mint ubiquity: kernelmodules_xfs
Mar 9 21:28:50 mint kernel: [17179776.184000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
Mar 9 21:28:50 mint kernel: [17179776.184000] SGI XFS Quota Management subsystem
Mar 9 21:28:50 mint ubiquity: umount_target
Mar 9 21:28:51 mint ubiquity: parted
Mar 9 21:28:51 mint kernel: [17179776.496000] cdrom: hdb: mrw address space DMA selected
Mar 9 21:28:51 mint kernel: [17179776.496000] cdrom open: mrw_status 'not mrw'
Mar 9 21:28:56 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Mar 9 21:29:01 mint dhclient: No DHCPOFFERS received.
Mar 9 21:29:01 mint dhclient: No working leases in persistent database - sleeping.
Mar 9 21:29:03 mint modprobe: WARNING: Not loading blacklisted module ipv6
Mar 9 21:29:03 mint modprobe: WARNING: Not loading blacklisted module ipv6
Mar 9 21:29:03 mint ntpdate[7029]: step time server 82.211.81.145 offset -0.007854 sec
Mar 9 21:29:03 mint kernel: [17179789.068000] end_request: I/O error, dev fd0, sector 0
Mar 9 21:29:16 mint kernel: [17179801.264000] end_request: I/O error, dev fd0, sector 0
Mar 9 21:29:16 mint ubiquity: dump
Mar 9 21:29:16 mint ubiquity: update_partitions
Mar 9 21:29:16 mint ubiquity: filesystems_detected
Mar 9 21:29:16 mint ubiquity: auto_mountpoints
Mar 9 21:29:17 mint ubiquity: autouse_swap
Mar 9 21:29:17 mint ubiquity: backup
Mar 9 21:29:17 mint ubiquity[6532]: switched to page stepPartAuto
Mar 9 21:29:26 mint ubiquity[6532]: ubiquity: ['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman'] exited with code 10
Mar 9 21:29:26 mint ubiquity[6532]: debconffilter_done: PartmanAuto (current: PartmanAuto)
Mar 9 21:29:26 mint ubiquity[6532]: Step_before = stepPartAuto
Mar 9 21:29:26 mint ubiquity[6532]: gparted_loop()
Mar 9 21:29:26 mint ubiquity[6532]: Running gparted: log-output -t ubiquity --pass-stdout gparted --installer 41962666
Mar 9 21:29:27 mint ubiquity[6532]: switched to page stepPartAdvanced
Mar 9 21:29:27 mint ubiquity[6532]: Step_after = stepPartAdvanced
Mar 9 21:29:41 mint ubiquity[6532]: Step_before = stepPartAdvanced
Mar 9 21:29:41 mint ubiquity[6532]: gparted replied: 0 OK
Mar 9 21:29:41 mint ubiquity[6532]: switched to page stepPartMountpoints
Mar 9 21:29:41 mint ubiquity[6532]: Step_after = stepPartMountpoints
Mar 9 21:30:26 mint ubiquity[6532]: Step_before = stepPartMountpoints
Mar 9 21:30:26 mint ubiquity[6532]: mountpoints: {}
Mar 9 21:30:26 mint ubiquity[6532]: Step_after = stepPartMountpoints
Mar 9 21:31:05 mint ubiquity[6532]: Step_before = stepPartMountpoints
Mar 9 21:31:05 mint ubiquity[6532]: mountpoints: {'/dev/sda1': ('swap', True, None, None), '/dev/sda3': ('/', True, None, None)}
Mar 9 21:31:06 mint ubiquity[6532]: switched to page stepReady
Mar 9 21:31:06 mint ubiquity[6532]: Step_after = stepReady
Mar 9 21:31:06 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/summary']' for ubiquity.components.summary.Summary
Mar 9 21:31:06 mint ubiquity[6532]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS, ^ubiquity/summary.*
Mar 9 21:31:10 mint ubiquity: unsupported
Mar 9 21:31:10 mint ubiquity: kernelmodules_basicfilesystems
Mar 9 21:31:10 mint ubiquity: kernelmodules_ext3
Mar 9 21:31:10 mint ubiquity: kernelmodules_jfs
Mar 9 21:31:10 mint ubiquity: kernelmodules_reiserfs
Mar 9 21:31:10 mint ubiquity: kernelmodules_xfs
Mar 9 21:31:10 mint ubiquity: umount_target
Mar 9 21:31:10 mint ubiquity: parted
Mar 9 21:31:10 mint kernel: [17179915.704000] cdrom: hdb: mrw address space DMA selected
Mar 9 21:31:10 mint kernel: [17179915.704000] cdrom open: mrw_status 'not mrw'
Mar 9 21:31:23 mint kernel: [17179928.256000] end_request: I/O error, dev fd0, sector 0
Mar 9 21:31:35 mint kernel: [17179940.444000] end_request: I/O error, dev fd0, sector 0
Mar 9 21:31:35 mint ubiquity: dump
Mar 9 21:31:35 mint ubiquity: update_partitions
Mar 9 21:31:36 mint ubiquity: filesystems_detected
Mar 9 21:31:36 mint ubiquity: auto_mountpoints
Mar 9 21:31:36 mint ubiquity: autouse_swap
Mar 9 21:31:36 mint ubiquity: backup
Mar 9 21:31:37 mint ubiquity[6532]: debconffilter_done: Summary (current: Summary)
Mar 9 21:32:21 mint ubiquity[6532]: Step_before = stepReady
Mar 9 21:32:21 mint ubiquity[6532]: progress_loop()
Mar 9 21:32:25 mint gconfd (root-8124): (Version 2.16.0) wird gestartet, Prozesskennung 8124, Benutzer »root«
Mar 9 21:32:25 mint gconfd (root-8124): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Mar 9 21:32:25 mint gconfd (root-8124): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Mar 9 21:32:25 mint gconfd (root-8124): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Mar 9 21:32:25 mint gconfd (root-8124): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Mar 9 21:32:25 mint gconfd (root-8124): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Mar 9 21:32:25 mint gconfd (root-8124): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst
Mar 9 21:32:26 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman-commit']' for ubiquity.components.partman_commit.PartmanCommit
Mar 9 21:32:26 mint ubiquity[6532]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Mar 9 21:32:26 mint ubiquity: unsupported
Mar 9 21:32:26 mint ubiquity: kernelmodules_basicfilesystems
Mar 9 21:32:26 mint ubiquity: kernelmodules_ext3
Mar 9 21:32:26 mint ubiquity: kernelmodules_jfs
Mar 9 21:32:26 mint ubiquity: kernelmodules_reiserfs
Mar 9 21:32:26 mint ubiquity: kernelmodules_xfs
Mar 9 21:32:26 mint ubiquity: umount_target
Mar 9 21:32:26 mint ubiquity: parted
Mar 9 21:32:26 mint ubiquity: dump
Mar 9 21:32:26 mint ubiquity: update_partitions
Mar 9 21:32:26 mint ubiquity: filesystems_detected
Mar 9 21:32:26 mint ubiquity: auto_mountpoints
Mar 9 21:32:26 mint ubiquity: autouse_swap
Mar 9 21:32:26 mint ubiquity: backup
Mar 9 21:34:16 mint kernel: [17179995.396000] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k
Mar 9 21:34:16 mint ubiquity: swapon: /dev/sda1: Device or resource busy
Mar 9 21:34:24 mint last message repeated 3 times
Mar 9 21:34:24 mint kernel: [17180003.660000] kjournald starting. Commit interval 5 seconds
Mar 9 21:34:24 mint kernel: [17180003.668000] EXT3 FS on sda3, internal journal
Mar 9 21:34:24 mint kernel: [17180003.668000] EXT3-fs: mounted filesystem with ordered data mode.
Mar 9 21:34:25 mint ubiquity: no record for '/block/fd0' in database
Mar 9 21:34:26 mint ubiquity[6532]: debconffilter_done: PartmanCommit (current: None)
Mar 9 21:34:26 mint ubiquity[6532]: log-output -t ubiquity gconftool-2 --unset /desktop/gnome/volume_manager/automount_drives
Mar 9 21:34:26 mint ubiquity[6532]: log-output -t ubiquity gconftool-2 --unset /desktop/gnome/volume_manager/automount_media
Mar 9 21:34:26 mint ubiquity[6532]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/install.py']' for ubiquity.components.install.Install
Mar 9 21:34:26 mint ubiquity[6532]: ubiquity: Watching for question patterns ^.*/apt-install-failed$, grub-installer/install_to_xfs, CAPB, ERROR, PROGRESS
Mar 9 21:34:26 mint ubiquity: /usr/lib/python2.4/site-packages/apt/__init__.py:17: FutureWarning: apt API not stable yet
Mar 9 21:34:26 mint ubiquity: warnings.warn("apt API not stable yet", FutureWarning)
Mar 9 21:38:10 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
Mar 9 21:38:14 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Mar 9 21:38:22 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
Mar 9 21:38:32 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Mar 9 21:38:43 mint dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17
Mar 9 21:38:43 mint python: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', 'sh', '-c', '/usr/lib/ubiquity/localechooser/post-base-installer && /usr/lib/ubiquity/localechooser/finish-install']' for ubiquity.components.language_apply.LanguageApply
Mar 9 21:38:46 mint ubiquity: Paketlisten werden gelesen...
Mar 9 21:38:46 mint ubiquity:
Mar 9 21:38:46 mint ubiquity: Abhängigkeitsbaum wird aufgebaut...
Mar 9 21:38:47 mint ubiquity:
Mar 9 21:38:47 mint ubiquity: Reading state information...
Mar 9 21:38:47 mint ubiquity:
Mar 9 21:38:48 mint ubiquity: Überspringe locales, es ist schon installiert und »upgrade« ist nicht gesetzt.
Mar 9 21:38:48 mint ubiquity: 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 6 nicht aktualisiert.
Mar 9 21:38:50 mint localechooser: Generating locales...
Mar 9 21:38:50 mint localechooser: de_DE.UTF-8...
Mar 9 21:38:52 mint localechooser: done
Mar 9 21:38:52 mint localechooser: Generation complete.
Mar 9 21:38:52 mint localechooser: Generating locales...
Mar 9 21:38:52 mint localechooser: de_DE.UTF-8...
Mar 9 21:38:52 mint localechooser: up-to-date
Mar 9 21:38:52 mint localechooser: en_US.UTF-8...
Mar 9 21:38:53 mint localechooser: done
Mar 9 21:38:53 mint localechooser: Generation complete.
Mar 9 21:38:54 mint ubiquity: Paketlisten werden gelesen...
Mar 9 21:38:54 mint ubiquity:
Mar 9 21:38:54 mint ubiquity: Abhängigkeitsbaum wird aufgebaut...
Mar 9 21:38:54 mint ubiquity:
Mar 9 21:38:54 mint ubiquity: Reading state information...
Mar 9 21:38:54 mint ubiquity:
Mar 9 21:38:54 mint ubiquity: Die folgenden zusätzlichen Pakete werden installiert:
Mar 9 21:38:54 mint ubiquity: libapt-pkg-perl libconfig-inifiles
detto
Level 1
Level 1
 
Posts: 1
Joined: Fri Mar 09, 2007 5:45 pm


Return to Installation & Boot

Who is online

Users browsing this forum: mtzlplex and 16 guests