SOLVED-and I'm the numpty-GRUB problem following upgrade

Questions about Grub, UEFI,the liveCD and the installer
Forum rules
Before you post please read this

SOLVED-and I'm the numpty-GRUB problem following upgrade

Postby willie the cat on Fri Jun 12, 2009 4:15 pm

This is my first post on this forum.
I had Mint 6 dual booting with Windows Vista.
Ignoring the advice that the more reliable upgrade path was the "terminal" method, I chose the easier "graphical" method.
All seems to be working except for two things.
1/ If I want to boot into Vista (don't laugh)- I get an error message: Error 11 Unrecognized device string.
When I press any key as asked, I get what looks like GRUB but looking almost like I'm in terminal.
When I tab to Vista, it then boots as normal.
Is there any way I can lose this?
Also, I get the message unable to find /usr/share/gdm/themes/Human/Hunanxml.
Does anyone have any thoughts on this. Please?
Last edited by willie the cat on Wed Jun 24, 2009 3:21 pm, edited 1 time in total.
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Linux Mint is funded by ads and donations.
 

Re: GRUB problem following upgrade

Postby Husse on Fri Jun 12, 2009 6:10 pm

Your boot problem can be caused by this
Is this really the error message?
unable to find /usr/share/gdm/themes/Human/Hunanxml.

I would rather expect the location to be /usr/share/themes/Human and it should be Human.xml
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19710
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: GRUB problem following upgrade

Postby merlwiz79 on Sat Jun 13, 2009 1:12 am

Husse wrote:Your boot problem can be caused by this
Is this really the error message?
unable to find /usr/share/gdm/themes/Human/Hunanxml.

I would rather expect the location to be /usr/share/themes/Human and it should be Human.xml

The theme is for gdm, so the location is correct but it's not installed.
User avatar
merlwiz79
Level 11
Level 11
 
Posts: 3637
Joined: Wed Apr 04, 2007 1:50 pm
Location: Here again :)

Re: GRUB problem following upgrade

Postby Husse on Sat Jun 13, 2009 9:19 am

The theme is for gdm, so the location is correct but it's not installed.

OK - but it's not there by default in either Gloria or Felicia (at least I can't find it :)
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19710
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: GRUB problem following upgrade

Postby willie the cat on Sat Jun 13, 2009 10:57 am

Yes it was Human.xml.
My typo. :oops:
I can't find Human in the themes folder, so how do I lose the error message?
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Re: GRUB problem following upgrade

Postby emorrp1 on Sat Jun 13, 2009 12:17 pm

you should be able to install the gnome-themes-ubuntu package, which should include human.
If you have a question that has been answered and solved, then please edit your original post and put a [SOLVED] at the end of your subject header
Hint - use a google search including the search term site:forums.linuxmint.com
emorrp1
Level 8
Level 8
 
Posts: 2322
Joined: Thu Feb 26, 2009 8:58 pm

Re: GRUB problem following upgrade

Postby willie the cat on Sat Jun 13, 2009 4:26 pm

emorrp1 wrote:you should be able to install the gnome-themes-ubuntu package, which should include human.


It was another of the Gnome themes packages in Synaptic,so that error message has gone.
:mrgreen:
However, the link for the explanation of the problem with GRUB and Vista went straight over my head.
WAY too complicated.
:?
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Re: GRUB problem following upgrade

Postby willie the cat on Fri Jun 19, 2009 4:29 pm

I;m still getting the "unrecognised device string" error.
Does anyone have a relatively simple solution.
I don't mind having a go in terminal, if the solution isn't too long winded. :?
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Re: GRUB problem following upgrade

Postby Husse on Sat Jun 20, 2009 1:14 pm

However, the link for the explanation of the problem with GRUB and Vista went straight over my head.
WAY too complicated.

And I have received compliments for how easy to understand it is :)
But it is no simple matter - basically it is a problem in some cases that the "naming" of the hard disks is not consistent and so they are not found
But reading that error again (Error 11 Unrecognized device string.) leads me in another direction
Post your menu.lst
Code: Select all
cat /boot/grub/menu.lst

copy it to your answer
There may be a missing space in that file.... (or two :))
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19710
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: GRUB problem following upgrade

Postby willie the cat on Sun Jun 21, 2009 3:59 pm

Ok, here goes:

initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

I'm dual-booting on a single160 GB hard disc on my laptop
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Re: GRUB problem following upgrade

Postby Husse on Sun Jun 21, 2009 4:24 pm

That can not be the entire menu.lst
Just in case do it again slightly changed
Code: Select all
cat /boot/grub/menu.lst >> menulisting

This should make the entire menu.lst appear in a file called menulisting in home if you open the terminal from the menu
To be clear - is the problem when you try to start Vista?
And clarify
When I press any key as asked, I get what looks like GRUB but looking almost like I'm in terminal.
When I tab to Vista, it then boots as normal.
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19710
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: GRUB problem following upgrade

Postby willie the cat on Sun Jun 21, 2009 4:43 pm

Now this is getting bizarre.
The problem occurs when I want to boot into Vista.
It's fine if I boot into Mint.
What happens is that I get the normal, rather whizzy looking Menu for what I want to boot into.
If I select "other operating system" i.e. Vista, I then get the "unrecognised device string" error message and it tells me to press any key.
When I do that, I then get the samr list of options as in the original bootloader screen, but in a much plainer format.

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Re: GRUB problem following upgrade

Postby Husse on Sun Jun 21, 2009 5:21 pm

Is that the menu.lst?
You have not accidentally duplicated it?
You better check the file itself - you have the path above
You should probably have somwething like this
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.

title Other operating systems:
root

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
rootnoverify (hd0,1)
savedefault
makeactive
chainloader +1


Note that I have made a small change to the Vista section - it should be rootnoverify not root I think
This is provided Vista is on sda2 the second partition, and an extended partition is needed but it should be there - it would not work otherwise
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19710
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: GRUB problem following upgrade

Postby merlwiz79 on Sun Jun 21, 2009 10:10 pm

Don't select Other operating systems: you should be selecting Windows Vista/Longhorn (loader)
User avatar
merlwiz79
Level 11
Level 11
 
Posts: 3637
Joined: Wed Apr 04, 2007 1:50 pm
Location: Here again :)

Re: GRUB problem following upgrade

Postby willie the cat on Mon Jun 22, 2009 3:15 pm

Husse wrote:Is that the menu.lst?
You have not accidentally duplicated it?
You better check the file itself - you have the path above
You should probably have somwething like this
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.

title Other operating systems:
root

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
rootnoverify (hd0,1)
savedefault
makeactive
chainloader +1


Note that I have made a small change to the Vista section - it should be rootnoverify not root I think
This is provided Vista is on sda2 the second partition, and an extended partition is needed but it should be there - it would not work otherwise


You're right. I had duplicated it by puttuing the same line in terminal twice.
I hadn't read your earlier post correctly- :oops: - and I was expecting the list to come up in terminal.
Here's the correct listing.
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## Graphical boot menu location
gfxmenu=/boot/gfxmenu/default.message

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda5 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.28-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.28-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.28-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-11-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-11-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Linux Mint 7 Gloria, kernel 2.6.27-7-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.27-7-generic root=/dev/sda5 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Linux Mint 7 Gloria, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Re: GRUB problem following upgrade

Postby willie the cat on Mon Jun 22, 2009 3:21 pm

merlwiz79 wrote:Don't select Other operating systems: you should be selecting Windows Vista/Longhorn (loader)


When the pretty Mint bootloader comes up, It only says "other operating systems", but does not specify Widows Vista/ LOnghorn until I get the plain version after the error message.
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Re: GRUB problem following upgrade

Postby willie the cat on Wed Jun 24, 2009 3:19 pm

Problem solved, and I'm a complete numpty. :oops:
The Bootloader screen only holds so many lines.
Tab down PAST the "Other Operating Systems" brings up another line saying, yes, you've guessed it, Vista/Longhorn Loader.
:oops: :oops: :oops:
willie the cat
Level 1
Level 1
 
Posts: 18
Joined: Wed Apr 15, 2009 4:27 pm

Linux Mint is funded by ads and donations.
 

Return to Installation & Boot

Who is online

Users browsing this forum: Google [Bot], Resistor and 13 guests