mint 8 standart cd do not recognize my partitions
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
mint 8 standart cd do not recognize my partitions
hi
i tried to install mint 8 gnome standart
check sum ok
but partitioning is an issue :
my existing partitions (i use now mint 7) :
sda5 /(root) ext 3 (mint 7 partition that i want to erase to install mint 8 on it)
sda1 /media/disk fuseblk (that is windows xp partition i wish to keep the dual boot)
sdb1 /media/ fuseblk (data disk, i wish to keep too)
but the mint 8 intall program don't recognize theses partitions
it sees two empty disks and proposes to chose one for install
and even if i chose 'manual patitioning' i can't find theses existing partitions
so i did not intall mint 8
is the cd bugged?
than you for advice
dondiba
ps i have 2 sata 160 go drives and they are not mounted as raid
the motherboard is msi neo2 intel p 865 chipset
i tried to install mint 8 gnome standart
check sum ok
but partitioning is an issue :
my existing partitions (i use now mint 7) :
sda5 /(root) ext 3 (mint 7 partition that i want to erase to install mint 8 on it)
sda1 /media/disk fuseblk (that is windows xp partition i wish to keep the dual boot)
sdb1 /media/ fuseblk (data disk, i wish to keep too)
but the mint 8 intall program don't recognize theses partitions
it sees two empty disks and proposes to chose one for install
and even if i chose 'manual patitioning' i can't find theses existing partitions
so i did not intall mint 8
is the cd bugged?
than you for advice
dondiba
ps i have 2 sata 160 go drives and they are not mounted as raid
the motherboard is msi neo2 intel p 865 chipset
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: mint 8 standart cd do not recognize my partitions
Please post a screenshot of Gparted showing your sda drive.
Re: mint 8 standart cd do not recognize my partitions
hi
the capture is attached
dondiba
the capture is attached
dondiba
Re: mint 8 standart cd do not recognize my partitions
Using Gparted (not the Mint Installer), unlock and delete sda5 and sda6.
2) Create a partition for swap of at least 1GB and format as Swap. If you plan on using hibernate make it 2x the amount of RAM installed in your computer.
3) Create a 20GB partition and format as ext4
4) Create a 30GB partition and format as ext4, then click the checkmark to apply all changes.
You can make your /home partion bigger if you want to. I just made it so you have room for another Linux install if you want to.
5) Run the Mint Installer and choose manual partitioning
6) Select the 20GB partition, click edit, and choose / (root) as the mount point
7) Select the 30GB partition and choose /home as the mount point
Then Foward your way out of there and continue with the install.
Ignore any warnings about not formatting, you already did that.
2) Create a partition for swap of at least 1GB and format as Swap. If you plan on using hibernate make it 2x the amount of RAM installed in your computer.
3) Create a 20GB partition and format as ext4
4) Create a 30GB partition and format as ext4, then click the checkmark to apply all changes.
You can make your /home partion bigger if you want to. I just made it so you have room for another Linux install if you want to.
5) Run the Mint Installer and choose manual partitioning
6) Select the 20GB partition, click edit, and choose / (root) as the mount point
7) Select the 30GB partition and choose /home as the mount point
Then Foward your way out of there and continue with the install.
Ignore any warnings about not formatting, you already did that.
Re: mint 8 standart cd do not recognize my partitions
hi
i have tried to partition accordingly (with warnings because my two identical sata drives have been recognised as one raid volume)
but gparted gave access to each hard drive (dev/sda & dev/sdb) and i deleted - formatted sda5 and sda6
but installing mint 8 the partitioning screen only shows a raid volume with the 2 hd
and propose to format one hd
and even with manual partitioning i get no more choice
(it is the same with the ubuntu 9.10 install disc)
i cancelled the install because i wish to keep my second hd 'data' and my win xp partition
(now i have i doubt if it still works)
so the question is
how to make mint8 see my hd as two different ones (they don't work as raid)
regards
dondiba
i have tried to partition accordingly (with warnings because my two identical sata drives have been recognised as one raid volume)
but gparted gave access to each hard drive (dev/sda & dev/sdb) and i deleted - formatted sda5 and sda6
but installing mint 8 the partitioning screen only shows a raid volume with the 2 hd
and propose to format one hd
and even with manual partitioning i get no more choice
(it is the same with the ubuntu 9.10 install disc)
i cancelled the install because i wish to keep my second hd 'data' and my win xp partition
(now i have i doubt if it still works)
so the question is
how to make mint8 see my hd as two different ones (they don't work as raid)
regards
dondiba
Re: mint 8 standart cd do not recognize my partitions
and here a screen shot of sda via gparted :
thanks for any advice
dondiba
thanks for any advice
dondiba
Re: mint 8 standart cd do not recognize my partitions
last information : gparted failed to format theses partitions with ext4
i tried ext3, ext2 , it did not work either
...
i'm lost
i tried ext3, ext2 , it did not work either
...
i'm lost
Re: mint 8 standart cd do not recognize my partitions
Before running the installer, go to a terminal and remove the dmraid package; Perhaps this will clear things up for you when you run the installer, it seems to have hard drive recognition issues until the above is done.
Code: Select all
sudo apt-get remove dmraid
Re: mint 8 standart cd do not recognize my partitions
thanks for advice
i'll buy a new computer ...
dondiba
i'll buy a new computer ...
dondiba
breaker wrote:Before running the installer, go to a terminal and remove the dmraid package;Perhaps this will clear things up for you when you run the installer, it seems to have hard drive recognition issues until the above is done.Code: Select all
sudo apt-get remove dmraid