Hardware: IBM Lenovo T43, 2 GHz processor, 1 GB ram, 60 GB Hard Drive
Setup: Dual boot: Windows 7 and Linux Mint (I had Ubuntu and am replacing it with Mint) I had three partitions: Windows 7, Common Files(shared between Windows and Linux), and Ubuntu.
Problem: I was trying to install Mint (using USB) and got to the partitioning section where GParted opened up and I tried to shrink the Common file partition, delete the Ubuntu partition, and combine that to create a larger partition for Mint. When accepting the changes, I got the error message:
This resulted in me not being able to install Mint. I tried to reboot, but it didn't work. I got what I think is the log file from startup using "dmesg" and the result is listed below. I tried just getting onto Windows 7, but I think the way I deleted the Ubuntu partition, I also screwed up the GRUB and now can only Live boot on Mint (I think that will get fixed when installing Mint?)Error informing the kernel about modifications to partition /dev/sda5 -- Device or resource busy. This means Linux won't know about any changes you made to /dev/sda5 until you reboot -- so you shouldn't mount it or use it in any way before rebooting.
AND
Failed to add partition 5 (Device or resource busy)
I think the crucial part of the log below is:
So needless to say, I cannot partition the hard drive without getting the error message and therefore cannot install Mint. Please let me know what I need to do. Also, if you need more clarification or info, please ask. I would like to get this fixed without having to reformat my whole computer. Thanks.[ 3.724876] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
[ 3.724928] NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to rem
ount read-write. Run chkdsk and mount in Windows.
[ 3.835383] NTFS volume version 3.1.
[ 3.835388] NTFS-fs warning (device sda5): load_system_files(): Volume is dirty. Will not be able to remount read-write.
Run chkdsk and mount in Windows.
- dmesg | more
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 S
MP Tue Jun 1 04:59:47 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fef5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef5000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 3f7f4000 - 3fecf775
[ 0.000000] Allocated new RAMDISK: 00100000 - 007db775
[ 0.000000] Move RAMDISK from 000000003f7f4000 - 000000003fecf774 to 00100000 - 007db774
[ 0.000000] ACPI: RSDP 000f6c00 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 3fee6ff2 0005C (v01 IBM TP-1Y 00001270 LTP 00000000)
[ 0.000000] ACPI: FACP 3fee7100 000F4 (v03 IBM TP-1Y 00001270 IBM 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 3fee72e7 0DB08 (v01 IBM TP-1Y 00001270 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fef6000 00040
[ 0.000000] ACPI: SSDT 3fee72b4 00033 (v01 IBM TP-1Y 00001270 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 3fef4def 00052 (v01 IBM TP-1Y 00001270 IBM 00000001)
[ 0.000000] ACPI: TCPA 3fef4e41 00032 (v01 IBM TP-1Y 00001270 PTL 00000001)
[ 0.000000] ACPI: APIC 3fef4e73 0005A (v01 IBM TP-1Y 00001270 IBM 00000001)
[ 0.000000] ACPI: MCFG 3fef4ecd 0003E (v01 IBM TP-1Y 00001270 IBM 00000001)
[ 0.000000] ACPI: BOOT 3fef4fd8 00028 (v01 IBM TP-1Y 00001270 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 138MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014c4000 - 00014ca100] BRK ==> [00014c4000 - 00014ca100]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 00007db775] NEW RAMDISK ==> [0000100000 - 00007db775]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fee0
[ 0.000000] On node 0 totalpages: 261759
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 278 pages used for memmap
[ 0.000000] HighMem zone: 35276 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34136 r0 d23208 u4194304
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259713
[ 0.000000] Kernel command line: initrd=/casper/initrd.lz boot=live live-media-path=/casper quiet splash -- BOOT_IMAGE=/c
asper/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003fee0)
[ 0.000000] Memory: 1025632k/1047424k available (2490kkernel code, 21032k reserved, 1318k data, 372k init, 142216k highme
m)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.709 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.41 BogoMIPS (lpj=7978836)
[ 0.008021] Security Framework initialized
[ 0.008027] SELinux: Disabled at boot.
[ 0.008034] Mount-cache hash table entries: 512
[ 0.008151] Initializing cgroup subsys ns
[ 0.008155] Initializing cgroup subsys cpuacct
[ 0.008158] Initializing cgroup subsys devices
[ 0.008161] Initializing cgroup subsys freezer
[ 0.008163] Initializing cgroup subsys net_cls
[ 0.008185] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008187] CPU: L2 cache: 2048K
[ 0.008191] mce: CPU supports 5 MCE banks
[ 0.008200] CPU0: Thermal monitoring enabled (TM2)
[ 0.008209] Performance Events: p6 PMU driver.
[ 0.008215] ... version: 0
[ 0.008217] ... bit width: 32
[ 0.008219] ... generic registers: 2
[ 0.008220] ... value mask: 00000000ffffffff
[ 0.008222] ... max period: 000000007fffffff
[ 0.008224] ... fixed-purpose events: 0
[ 0.008226] ... event mask: 0000000000000003
[ 0.008230] Checking 'hlt' instruction... OK.
[ 0.024354] SMP alternatives: switching to UP code
[ 0.027721] Freeing SMP alternatives: 13k freed
[ 0.027727] ACPI: Core revision 20090903
[ 0.048057] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091544] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
[ 0.092001] Brought up 1 CPUs
[ 0.092001] Total of 1 processors activated (3989.41 BogoMIPS).
[ 0.092001] CPU0 attaching NULL sched-domain.
[ 0.092001] devtmpfs: initialized
[ 0.092001] regulator: core version 0.5
[ 0.092001] NET: Registered protocol family 16
[ 0.092001] ACPI: bus type pci registered
[ 0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.092001] PCI: MCFG area at e0000000 reserved in E820
[ 0.092001] PCI: Using MMCONFIG for extended config space
[ 0.092001] PCI: Using configuration type 1 for base access
[ 0.092001] bio: create slab <bio-0> at 0
[ 0.092001] ACPI: EC: EC description table is found, configuring boot EC
[ 0.100662] ACPI: Interpreter enabled
[ 0.100670] ACPI: (supports S0 S3 S4 S5)
[ 0.100692] ACPI: Using IOAPIC for interrupt routing
[ 0.108867] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.108909] ACPI: Power Resource [PUBS] (on)
[ 0.109033] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.109055] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.109154] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.109158] pci 0000:00:01.0: PME# disabled
[ 0.109269] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.109274] pci 0000:00:1c.0: PME# disabled
[ 0.109361] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.109366] pci 0000:00:1c.2: PME# disabled
[ 0.109427] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.109487] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.109547] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.109607] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
[ 0.109669] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0000000-0xb00003ff]
[ 0.109727] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.109732] pci 0000:00:1d.7: PME# disabled
[ 0.109836] pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff]
[ 0.109844] pci 0000:00:1e.2: reg 14 io port: [0x1880-0x18bf]
[ 0.109852] pci 0000:00:1e.2: reg 18 32bit mmio: [0xb0000800-0xb00009ff]
[ 0.109860] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xb0000400-0xb00004ff]
[ 0.109897] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.109901] pci 0000:00:1e.2: PME# disabled
[ 0.109938] pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff]
[ 0.109946] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f]
[ 0.109992] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.109997] pci 0000:00:1e.3: PME# disabled
[ 0.112037] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.112043] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.112048] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.112052] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[ 0.112057] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15e0-15ef
[ 0.112096] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.112104] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.112112] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.112119] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.112127] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf]
[ 0.112160] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.112165] pci 0000:00:1f.2: PME# disabled
[ 0.112224] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.112283] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xc7ffffff]
[ 0.112289] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.112295] pci 0000:01:00.0: reg 18 32bit mmio: [0xb0100000-0xb010ffff]
[ 0.112309] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.112326] pci 0000:01:00.0: supports D1 D2
[ 0.112340] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.112399] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.112403] pci 0000:00:01.0: bridge 32bit mmio: [0xb0100000-0xb01fffff]
[ 0.112407] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xc7ffffff]
[ 0.112483] pci 0000:02:00.0: reg 10 64bit mmio: [0xb0200000-0xb020ffff]
[ 0.112574] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.112580] pci 0000:02:00.0: PME# disabled
[ 0.112617] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.112713] pci 0000:00:1c.0: bridge 32bit mmio: [0xb0200000-0xb02fffff]
[ 0.112770] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
[ 0.112775] pci 0000:00:1c.2: bridge 32bit mmio: [0xb2000000-0xb3ffffff]
[ 0.112783] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc8000000-0xc80fffff]
[ 0.112831] pci 0000:0b:00.0: reg 10 32bit mmio: [0xb4000000-0xb4000fff]
[ 0.112859] pci 0000:0b:00.0: supports D1 D2
[ 0.112861] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112867] pci 0000:0b:00.0: PME# disabled
[ 0.112938] pci 0000:0b:02.0: reg 10 32bit mmio: [0xb4001000-0xb4001fff]
[ 0.113010] pci 0000:0b:02.0: PME# supported from D0 D3hot D3cold
[ 0.113016] pci 0000:0b:02.0: PME# disabled
[ 0.113084] pci 0000:00:1e.0: transparent bridge
[ 0.113088] pci 0000:00:1e.0: bridge io port: [0x5000-0x8fff]
[ 0.113094] pci 0000:00:1e.0: bridge 32bit mmio: [0xb4000000-0xbfffffff]
[ 0.113101] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.113144] pci_bus 0000:00: on NUMA node 0
[ 0.113150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.113259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.113322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.113388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.113461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.117645] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.117825] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.118002] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.118179] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.118355] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.118532] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.118709] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.118886] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.119006] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.119010] vgaarb: loaded
[ 0.119069] PCI: Using ACPI for IRQ routing
[ 0.119140] Expanded resource reserved due to conflict with Adapter ROM
[ 0.119340] hpet clockevent registered
[ 0.119344] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.119351] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.119356] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.124016] Switching to clocksource tsc
[ 0.125327] pnp: PnP ACPI init
[ 0.125337] ACPI: bus type pnp registered
[ 0.128450] pnp: PnP ACPI: found 14 devices
[ 0.128452] ACPI: ACPI bus type pnp unregistered
[ 0.128455] PnPBIOS: Disabled by ACPI PNP
[ 0.128466] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.128469] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.128473] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.128476] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.128479] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.128483] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.128486] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.128490] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.128493] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.128496] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.128500] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.128503] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.128507] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.128510] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.128517] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.128521] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.128524] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.128527] system 00:02: ioport range 0x1600-0x1641 has been reserved
[ 0.128531] system 00:02: ioport range 0x1644-0x167f has been reserved
[ 0.128534] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.128538] system 00:02: iomem range 0xf0008000-0xf000bfff has been reserved
[ 0.128541] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.128548] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.128552] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.163264] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.163267] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.163272] pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff
[ 0.163276] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xc7ffffff
[ 0.163280] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.163284] pci 0000:00:1c.0: IO window: 0x9000-0x9fff
[ 0.163291] pci 0000:00:1c.0: MEM window: 0xb0200000-0xb02fffff
[ 0.163296] pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
[ 0.163304] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.163308] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.163314] pci 0000:00:1c.2: MEM window: 0xb2000000-0xb3ffffff
[ 0.163319] pci 0000:00:1c.2: PREFETCH window: 0x000000c8000000-0x000000c80fffff
[ 0.163329] pci 0000:0b:00.0: CardBus bridge, secondary bus 0000:0c
[ 0.163331] pci 0000:0b:00.0: IO window: 0x005000-0x0050ff
[ 0.163337] pci 0000:0b:00.0: IO window: 0x005400-0x0054ff
[ 0.163343] pci 0000:0b:00.0: PREFETCH window: 0xd0000000-0xd3ffffff
[ 0.163350] pci 0000:0b:00.0: MEM window: 0xb8000000-0xbbffffff
[ 0.163356] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b
[ 0.163359] pci 0000:00:1e.0: IO window: 0x5000-0x8fff
[ 0.163365] pci 0000:00:1e.0: MEM window: 0xb4000000-0xbfffffff
[ 0.163371] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.163387] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.163391] pci 0000:00:01.0: setting latency timer to 64
[ 0.163401] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.163406] pci 0000:00:1c.0: setting latency timer to 64
[ 0.163417] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.163422] pci 0000:00:1c.2: setting latency timer to 64
[ 0.163429] pci 0000:00:1e.0: setting latency timer to 64
[ 0.163441] pci 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.163448] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.163451] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.163454] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff
[ 0.163457] pci_bus 0000:01: resource 1 mem: [0xb0100000-0xb01fffff]
[ 0.163460] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc7ffffff]
[ 0.163463] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 0.163466] pci_bus 0000:02: resource 1 mem: [0xb0200000-0xb02fffff]
[ 0.163469] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x401fffff]
[ 0.163472] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.163475] pci_bus 0000:03: resource 1 mem: [0xb2000000-0xb3ffffff]
[ 0.163477] pci_bus 0000:03: resource 2 pref mem [0xc8000000-0xc80fffff]
[ 0.163480] pci_bus 0000:0b: resource 0 io: [0x5000-0x8fff]
[ 0.163483] pci_bus 0000:0b: resource 1 mem: [0xb4000000-0xbfffffff]
[ 0.163486] pci_bus 0000:0b: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.163489] pci_bus 0000:0b: resource 3 io: [0x00-0xffff]
[ 0.163492] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffff]
[ 0.163495] pci_bus 0000:0c: resource 0 io: [0x5000-0x50ff]
[ 0.163497] pci_bus 0000:0c: resource 1 io: [0x5400-0x54ff]
[ 0.163500] pci_bus 0000:0c: resource 2 pref mem [0xd0000000-0xd3ffffff]
[ 0.163503] pci_bus 0000:0c: resource 3 mem: [0xb8000000-0xbbffffff]
[ 0.163532] NET: Registered protocol family 2
[ 0.163610] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.163902] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.164835] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.165425] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.165430] TCP reno registered
[ 0.165557] NET: Registered protocol family 1
[ 0.165679] pci 0000:01:00.0: Boot video device
[ 0.165742] Unpacking initramfs...
[ 1.843303] Freeing initrd memory: 7021k freed
[ 1.848936] Simple Boot Flag at 0x35 set to 0x1
[ 1.849212] audit: initializing netlink socket (disabled)
[ 1.849230] type=2000 audit(1286231313.848:1): initialized
[ 1.849440] highmem bounce pool size: 64 pages
[ 1.849445] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.850854] VFS: Disk quotas dquot_6.5.2
[ 1.850915] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.850994] msgmni has been set to 1739
[ 1.851192] alg: No test for stdrng (krng)
[ 1.851244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.851247] io scheduler noop registered
[ 1.851249] io scheduler anticipatory registered
[ 1.851251] io scheduler deadline registered
[ 1.851291] io scheduler cfq registered (default)
[ 1.851411] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.851418] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.851532] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.851542] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.851683] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 1.851692] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.851866] isapnp: Scanning for PnP cards...
[ 2.205838] isapnp: No Plug & Play device found
[ 2.207109] Linux agpgart interface v0.103
[ 2.207227] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.208124] serial 00:0a: activated
[ 2.208247] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 2.208346] serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 2.208353] serial 0000:00:1e.3: PCI INT B disabled
[ 2.208431] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.214615] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.214623] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.214711] mice: PS/2 mouse device common for all mice
[ 2.214762] rtc_cmos 00:06: RTC can wake from S4
[ 2.214795] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.214825] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.214840] cpuidle: using governor ladder
[ 2.214843] cpuidle: using governor menu
[ 2.214847] No iBFT detected.
[ 2.215173] TCP cubic registered
[ 2.215308] NET: Registered protocol family 10
[ 2.215734] lo: Disabled Privacy Extensions
[ 2.216032] Mobile IPv6
[ 2.216035] NET: Registered protocol family 17
[ 2.216051] Using IPI No-Shortcut mode
[ 2.216116] PM: Resume from disk failed.
[ 2.216122] registered taskstats version 1
[ 2.216477] rtc_cmos 00:06: setting system clock to 2010-10-04 22:28:34 UTC (1286231314)
[ 2.216523] Initalizing network drop monitor service
[ 2.216550] Freeing unused kernel memory: 372k freed
[ 2.216764] Write protecting the kernel text: 2492k
[ 2.216794] Write protecting the kernel read-only data: 916k
[ 2.217976] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.232172] udev: starting version 158
[ 2.438413] usbcore: registered new interface driver usbfs
[ 2.438541] usbcore: registered new interface driver hub
[ 2.438658] usbcore: registered new device driver usb
[ 2.445072] SCSI subsystem initialized
[ 2.474884] Floppy drive(s): fd0 is 1.44M
[ 2.475049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.476045] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.476053] ACPI: Thermal Zone [THM0] (40 C)
[ 2.477433] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 2.477625] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 2.477640] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.477658] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.477662] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.477684] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.477714] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.481605] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.486486] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0000000
[ 2.490412] libata version 3.00 loaded.
[ 2.495246] FDC 0 is a National Semiconductor PC87306
[ 2.495290] tg3.c:v3.102 (September 1, 2009)
[ 2.495307] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.495316] tg3 0000:02:00.0: setting latency timer to 64
[ 2.535169] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.535211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.535214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.535217] usb usb1: Product: EHCI Host Controller
[ 2.535219] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 2.535222] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.535336] usb usb1: configuration #1 chosen from 1 choice
[ 2.535397] hub 1-0:1.0: USB hub found
[ 2.535405] hub 1-0:1.0: 8 ports detected
[ 2.535469] ata_piix 0000:00:1f.2: version 2.13
[ 2.535486] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.537989] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.538600] eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:15:58:0b:9e:a0
[ 2.538604] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.538607] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.538609] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.688018] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.688093] scsi0 : ata_piix
[ 2.688220] scsi1 : ata_piix
[ 2.689157] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14
[ 2.689161] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15
[ 2.689469] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.689673] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.689682] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.689690] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.689694] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.689706] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.689744] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 2.689781] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.689784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.689787] usb usb2: Product: UHCI Host Controller
[ 2.689789] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.689792] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.689861] usb usb2: configuration #1 chosen from 1 choice
[ 2.689894] hub 2-0:1.0: USB hub found
[ 2.689901] hub 2-0:1.0: 2 ports detected
[ 2.690106] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 2.690332] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 2.690341] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.690347] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.690351] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.690358] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.690392] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 2.690424] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.690427] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.690430] usb usb3: Product: UHCI Host Controller
[ 2.690432] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.690434] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.690488] usb usb3: configuration #1 chosen from 1 choice
[ 2.690518] hub 3-0:1.0: USB hub found
[ 2.690525] hub 3-0:1.0: 2 ports detected
[ 2.690568] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.690575] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.690578] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.690585] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.690616] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.690646] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.690649] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.690652] usb usb4: Product: UHCI Host Controller
[ 2.690654] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.690656] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.690708] usb usb4: configuration #1 chosen from 1 choice
[ 2.690737] hub 4-0:1.0: USB hub found
[ 2.690743] hub 4-0:1.0: 2 ports detected
[ 2.690785] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.690791] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.690794] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.690801] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.690826] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[ 2.690857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.690860] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.690862] usb usb5: Product: UHCI Host Controller
[ 2.690865] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.690867] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.690919] usb usb5: configuration #1 chosen from 1 choice
[ 2.690945] hub 5-0:1.0: USB hub found
[ 2.690951] hub 5-0:1.0: 2 ports detected
[ 2.844344] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 2.852364] ata2.01: NODEV after polling detection
[ 2.853002] ata1.00: ATA-6: FUJITSU MHT2060AH, 8471, max UDMA/100
[ 2.853005] ata1.00: 117210240 sectors, multi 16: LBA
[ 2.853018] ata1.00: applying bridge limits
[ 2.860647] ata2.00: ATAPI: UJDA755yDVD/CDRW, 1.74, max UDMA/33
[ 2.869046] ata1.00: configured for UDMA/100
[ 2.869166] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 8471 PQ: 0 ANSI: 5
[ 2.876539] ata2.00: configured for UDMA/33
[ 2.879386] scsi 1:0:0:0: CD-ROM MATSHITA UJDA755yDVD/CDRW 1.74 PQ: 0 ANSI: 5
[ 2.902641] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.902695] sd 0:0:0:0: [sda] Write Protect is off
[ 2.902698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.902720] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.902847] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.908026] Uniform CD-ROM driver Revision: 3.20
[ 2.908250] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.010864] usb 1-4: New USB device found, idVendor=058f, idProduct=6387
[ 3.010867] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.010870] usb 1-4: Product: Mass Storage
[ 3.010872] usb 1-4: Manufacturer: Generic
[ 3.010874] usb 1-4: SerialNumber: 68C5DD01
[ 3.010943] usb 1-4: configuration #1 chosen from 1 choice
[ 3.019279] Initializing USB Mass Storage driver...
[ 3.019356] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.019464] usbcore: registered new interface driver usb-storage
[ 3.019467] USB Mass Storage support registered.
[ 3.019567] usb-storage: device found at 2
[ 3.019569] usb-storage: waiting for device to settle before scanning
[ 3.234131] sda1 sda2 < sda5 >
[ 3.284594] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.292926] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.293249] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.623735] Uniform Multi-Platform E-IDE driver
[ 3.624386] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.698846] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 3.724871] NTFS volume version 3.1.
[ 3.724876] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
[ 3.724928] NTFS-fs warning (device sda1): load_system_files(): Volume has unsupported flags set. Will not be able to rem
ount read-write. Run chkdsk and mount in Windows.
[ 3.835383] NTFS volume version 3.1.
[ 3.835388] NTFS-fs warning (device sda5): load_system_files(): Volume is dirty. Will not be able to remount read-write.
Run chkdsk and mount in Windows.
[ 8.016155] usb-storage: device scan complete
[ 8.016910] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
[ 8.017669] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8.019579] sd 2:0:0:0: [sdb] 2041856 512-byte logical blocks: (1.04 GB/997 MiB)
[ 8.020025] sd 2:0:0:0: [sdb] Write Protect is off
[ 8.020029] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 8.020032] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.022136] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.022181] sdb: sdb1
[ 8.257556] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.257603] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 8.407215] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 8.419037] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.425482] aufs 2-standalone.tree-32-20100125
[ 8.439314] loop: module loaded
[ 8.506321] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 13.756226] udev: starting version 158
[ 14.072678] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 14.103384] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 14.103656] ACPI: Lid Switch [LID]
[ 14.103710] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 14.103741] ACPI: Sleep Button [SLPB]
[ 14.103812] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 14.103836] ACPI: Power Button [PWRF]
[ 14.143763] lib80211: common routines for IEEE802.11 drivers
[ 14.143767] lib80211_crypt: registered algorithm 'NULL'
[ 14.150818] intel_rng: FWH not detected
[ 14.263672] Marking TSC unstable due to TSC halts in idle
[ 14.265027] processor LNXCPU:00: registered as cooling_device0
[ 14.267312] Switching to clocksource hpet
[ 14.276695] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 14.285695] ACPI: AC Adapter [AC] (on-line)
[ 14.286266] Non-volatile memory driver v1.3
[ 14.329232] NET: Registered protocol family 23
[ 14.341304] ACPI: Battery Slot [BAT0] (battery present)
[ 14.374846] parport_pc 00:0b: reported by Plug and Play ACPI
[ 14.374902] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 14.431758] [drm] Initialized drm 1.1.0 20060810
[ 14.435927] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[ 14.435984] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 14.445431] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 14.445435] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 14.467791] nsc-ircc 00:0c: activated
[ 14.467842] nsc-ircc, chip->init
[ 14.467855] nsc-ircc, Found chip at base=0x02e
[ 14.467892] nsc-ircc, driver loaded (Dag Brattli)
[ 14.468746] IrDA: Registered device irda0
[ 14.468749] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 14.494046] yenta_cardbus 0000:0b:00.0: CardBus bridge found [1014:056c]
[ 14.528936] udev: renamed network interface eth0 to eth1
[ 14.602415] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 14.602418] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 14.624848] yenta_cardbus 0000:0b:00.0: ISA IRQ mask 0x0c30, PCI irq 16
[ 14.624853] yenta_cardbus 0000:0b:00.0: Socket status: 30000006
[ 14.624862] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff
[ 14.624866] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x8fff: clean.
[ 14.625832] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge Memory window: 0xb4000000 - 0xbfffffff
[ 14.625836] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
[ 14.633960] ipw2200 0000:0b:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 14.637503] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 14.637553] ipw2200 0000:0b:02.0: firmware: requesting ipw2200-bss.fw
[ 14.708367] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 14.727423] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 14.730303] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 14.730306] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 14.730308] thinkpad_acpi: ThinkPad BIOS 1YET62WW (1.27 ), EC 1YHT29WW-1.06
[ 14.730311] thinkpad_acpi: IBM ThinkPad T43, model
[ 14.730313] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[ 14.730315] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[ 14.751333] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 14.753232] Registered led device: tpacpi::thinklight
[ 14.753429] Registered led device: tpacpi::power
[ 14.753607] Registered led device: tpacpi::standby
[ 14.795387] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode
[ 14.795921] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 14.831035] [drm] radeon kernel modesetting enabled.
[ 14.831150] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 14.831187] radeon 0000:01:00.0: power state changed by ACPI to D0
[ 14.831196] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.831202] radeon 0000:01:00.0: setting latency timer to 64
[ 14.834792] [drm] radeon: Initializing kernel modesetting.
[ 14.869866] [drm] register mmio base: 0xB0100000
[ 14.869869] [drm] register mmio size: 65536
[ 14.870207] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 14.870226] [drm] Generation 2 PCI interface, using max accessible memory
[ 14.870230] [drm] radeon: VRAM 64M
[ 14.870232] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[ 14.870234] [drm] radeon: GTT 512M
[ 14.870235] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 14.870276] radeon 0000:01:00.0: irq 27 for MSI/MSI-X
[ 14.870281] [drm] radeon: using MSI.
[ 14.870308] [drm] radeon: irq initialized.
[ 14.871035] [drm] Detected VRAM RAM=64M, BAR=128M
[ 14.871039] [drm] RAM width 64bits DDR
[ 14.872090] [TTM] Zone kernel: Available graphics memory: 445598 kiB.
[ 14.872093] [TTM] Zone highmem: Available graphics memory: 516706 kiB.
[ 14.872112] [drm] radeon: 64M of VRAM memory ready
[ 14.872115] [drm] radeon: 512M of GTT memory ready.
[ 14.872135] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.872652] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 14.872715] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 14.872725] [drm] radeon: cp idle (0x10000C03)
[ 14.872767] [drm] Loading R300 Microcode
[ 14.873180] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 14.886889] [drm] radeon: ring at 0x0000000020000000
[ 14.886910] [drm] ring test succeeded in 1 usecs
[ 14.887061] [drm] radeon: ib pool ready.
[ 14.887126] [drm] ib test succeeded in 0 usecs
[ 14.887212] [drm] DFP table revision: 4
[ 14.887254] [drm] Panel ID String: 1024x768
[ 14.887256] [drm] Panel Size 1024x768
[ 14.887285] [drm] Default TV standard: NTSC
[ 14.887287] [drm] 27.000000000 MHz TV ref clk
[ 14.887289] [drm] Default TV standard: NTSC
[ 14.887291] [drm] 27.000000000 MHz TV ref clk
[ 14.887320] [drm] Radeon Display Connectors
[ 14.887322] [drm] Connector 0:
[ 14.887323] [drm] VGA
[ 14.887326] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 14.887328] [drm] Encoders:
[ 14.887330] [drm] CRT1: INTERNAL_DAC1
[ 14.887332] [drm] Connector 1:
[ 14.887334] [drm] DVI-D
[ 14.887335] [drm] HPD1
[ 14.887338] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 14.887340] [drm] Encoders:
[ 14.887342] [drm] DFP1: INTERNAL_TMDS1
[ 14.887343] [drm] Connector 2:
[ 14.887345] [drm] LVDS
[ 14.887346] [drm] Encoders:
[ 14.887354] [drm] LCD1: INTERNAL_LVDS
[ 14.887355] [drm] Connector 3:
[ 14.887357] [drm] S-video
[ 14.887358] [drm] Encoders:
[ 14.887360] [drm] TV1: INTERNAL_DAC2
[ 14.959824] [drm] fb mappable at 0xC00C0000
[ 14.959827] [drm] vram apper at 0xC0000000
[ 14.959828] [drm] size 3145728
[ 14.959830] [drm] fb depth is 24
[ 14.959832] [drm] pitch is 4096
[ 15.053559] Console: switching to colour frame buffer device 128x48
[ 15.058428] fb0: radeondrmfb frame buffer device
[ 15.058429] registered panic notifier
[ 15.064954] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 15.069877] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
[ 15.083574] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.083612] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 15.109416] udev: renamed network interface eth0 to eth2
[ 16.008032] intel8x0_measure_ac97_clock: measured 55462 usecs (2672 samples)
[ 16.008035] intel8x0: clocking to 48000
[ 16.008994] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 16.009020] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
[ 16.112088] MC'97 1 converters and GPIO not ready (0xff00)
[ 16.810109] fuse init (API version 7.13)
[ 17.629654] P-state transition latency capped at 20 uS
[ 18.871628] Bluetooth: Core ver 2.15
[ 18.871687] NET: Registered protocol family 31
[ 18.871689] Bluetooth: HCI device and connection manager initialized
[ 18.871692] Bluetooth: HCI socket layer initialized
[ 18.936885] Bluetooth: L2CAP ver 2.14
[ 18.936889] Bluetooth: L2CAP socket layer initialized
[ 18.949672] Bluetooth: RFCOMM TTY layer initialized
[ 18.949677] Bluetooth: RFCOMM socket layer initialized
[ 18.949680] Bluetooth: RFCOMM ver 1.11
[ 18.980206] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.980210] Bluetooth: BNEP filters: protocol multicast
[ 19.199730] Bridge firewalling registered
[ 19.200147] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.240628] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.240631] Bluetooth: SCO socket layer initialized
[ 19.745223] lp0: using parport0 (interrupt-driven).
[ 19.763910] ppdev: user-space parallel port driver
[ 29.652019] eth2: no IPv6 routers present
[ 102.611725] lib80211_crypt: registered algorithm 'WEP'