I've tried repeatedly to install Daryna without much luck. I've tried several different downloads and keep getting the same errors. The disks work fine when installing onto another PC so I assume that the problem is my PC setup. Celena installs OK and I'm using this at the moment.
I insert the disk and select the optin to run Daryna
The screen clears and after a short delay I receive the following
busybox v1.1.13 .......
after this I get the message [158.209480] ata 7.00:exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[158.209480] ata 7.00: cmd/00:08:00:00:00/00:00:00:00:00/e0 tag 0 Cdb 0x0 data 4096 in
the message repeats a number of times with the number in brackets changing
then the message buffer I/O error on device side
logical block 0
logical block 1
logical block 2 .....
..... logical block 7
I've looked on the forums for help and have tried most of the suggestion referring to changining quiet splash to nosplah, nolapic or noacpi
As you quess this is very frustrating - I have seen Daryna running on a friend's PC and it looks like a great distro. If only I could get it to run.
Thanks in advance