Edirol FA-66 Bus-Server Error

Questions about applications and software
Forum rules
Before you post please read this

Edirol FA-66 Bus-Server Error

Postby Pingaloka on Sun May 06, 2012 6:48 pm

HEllo people, I'ved been trying to install this soundcard in Linux Mint 12 withouth success yet. Any help is more than welcomed!
I fallowed this tutorial for installation:

http://www.audiorecording.me/focusrite- ... guide.html

Nothings, nada...this is what I get when I write:

ffado-dbus-server

-----------------------------------------------
FFADO Control DBUS service
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

Discovering devices...
01521840424: Warning (ieee1394service.cpp)[ 375] initialize: Could not set SPLIT_TIMEOUT to min requested (1000000)
01521840495: Warning (ieee1394service.cpp)[ 379] initialize: Set SPLIT_TIMEOUT to min requested (1000000) did not succeed
DBUS service running
press ctrl-c to stop it & exit






And when I write:

ffado-diag

FFADO diagnostic utility 2.999.0-
============================
(C) 2008 Pieter Palmers
2009-2010 Arnold Krille

=== CHECK ===
Base system...
kernel version............ 3.0.0-12-generic
old 1394 stack present.... False
old 1394 stack loaded..... False
old 1394 stack active..... False
new 1394 stack present.... True
new 1394 stack loaded..... True
new 1394 stack active..... True
/dev/raw1394 node present. False
Prerequisites (dynamic at run-time)...
gcc ............... gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
g++ ............... sh: g++: not found
PyQt4 (by pyuic4) . sh: pyuic4: not found
jackd ............. jackd version 0.121.0 tmpdir /dev/shm protocol 24
path ............ /usr/bin/jackd
flags ........... Package jack was not found in the pkg-config search path.
Perhaps you should add the directory containing `jack.pc'
to the PKG_CONFIG_PATH environment variable
No package 'jack' found
libraw1394 ........ 2.0.7
flags ........... -lraw1394
libavc1394 ........ Package libavc1394 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libavc1394.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libavc1394' found
flags ........... Package libavc1394 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libavc1394.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libavc1394' found
libiec61883 ....... 1.2.0
flags ........... -liec61883 -lraw1394
libxml++-2.6 ...... Package libxml++-2.6 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxml++-2.6.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libxml++-2.6' found
flags ........... Package libxml++-2.6 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libxml++-2.6.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libxml++-2.6' found
dbus-1 ............ Package dbus-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `dbus-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dbus-1' found
flags ........... Package dbus-1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `dbus-1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'dbus-1' found
Prerequisites (static at compile-time)...
gcc ............... gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
g++ ............... g++ (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
PyQt4 (by pyuic4) . Python User Interface Compiler 4.8.5 for Qt version 4.7.3
jackd ............. sh: jackd: not found
path ............
flags ........... Package jack was not found in the pkg-config search path.
libraw1394 ........ 2.0.7
flags ........... -lraw1394
libavc1394 ........ Package libavc1394 was not found in the pkg-config search path.
flags ........... Package libavc1394 was not found in the pkg-config search path.
libiec61883 ....... 1.2.0
flags ........... -liec61883 -lraw1394
libxml++-2.6 ...... 2.34.1
flags ........... -pthread -I/usr/include/glib-2.0 -I/usr/lib/i386-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -pthread -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lgthread-2.0 -lrt -lglib-2.0
dbus-1 ............ 1.4.14
flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/i386-linux-gnu/dbus-1.0/include -ldbus-1 -lpthread -lrt
Hardware...
Host controllers:
03:05.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

CPU info:
Architecture: i686
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
CPU socket(s): 1
Vendor ID: AuthenticAMD
CPU family: 16
Model: 5
Stepping: 3
CPU MHz: 800.000
BogoMIPS: 6227.80
Virtualization: AMD-V
L1d cache: 64K
L1i cache: 64K
L2 cache: 512K
Configuration...
IRQ information
Hardware Interrupts:
--------------------
IRQ 0: PID: None, count: [42, 42, 42, 42], Sched None (priority None), drivers: ['timer']
IRQ 1: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['i8042']
IRQ 7: PID: None, count: [1, 1, 1, 1], Sched None (priority None), drivers: ['parport0']
IRQ 8: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['rtc0']
IRQ 9: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['acpi']
IRQ 12: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['i8042']
IRQ 14: PID: None, count: [5075, 5075, 5075, 5075], Sched None (priority None), drivers: ['pata_atiixp']
IRQ 15: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['pata_atiixp']
IRQ 16: PID: None, count: [975, 975, 975, 975], Sched None (priority None), drivers: ['ohci_hcd:usb3', 'ohci_hcd:usb4']
IRQ 17: PID: None, count: [7, 7, 7, 7], Sched None (priority None), drivers: ['ehci_hcd:usb1']
IRQ 18: PID: None, count: [160059, 160059, 160059, 160059], Sched None (priority None), drivers: ['ohci_hcd:usb5', 'ohci_hcd:usb6', 'ohci_hcd:usb7', 'nvidia']
IRQ 19: PID: None, count: [35536, 35536, 35536, 35536], Sched None (priority None), drivers: ['ehci_hcd:usb2', 'hda_intel']
IRQ 20: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['firewire_ohci']
IRQ 22: PID: None, count: [9851, 9851, 9851, 9851], Sched None (priority None), drivers: ['ahci']
IRQ 42: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['eth0']

Software Interrupts:
--------------------

=== REPORT ===
FireWire kernel drivers:

The new FireWire kernel stack is loaded.
This is still kind of experimental. If you encounter problems, please also check
with the old stack.

I'm completely lost!
Pingaloka
Level 1
Level 1
 
Posts: 3
Joined: Sun May 06, 2012 6:42 pm

Linux Mint is funded by ads and donations.
 

Re: Edirol FA-66 Bus-Server Error

Postby Pingaloka on Sun May 06, 2012 6:55 pm

And if I write:

ffado-test Discover


-----------------------------------------------
FFADO test and diagnostic utility
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

04110764414: Warning (ieee1394service.cpp)[ 375] initialize: Could not set SPLIT_TIMEOUT to min requested (1000000)
04110764483: Warning (ieee1394service.cpp)[ 379] initialize: Set SPLIT_TIMEOUT to min requested (1000000) did not succeed
no message buffer overruns
Pingaloka
Level 1
Level 1
 
Posts: 3
Joined: Sun May 06, 2012 6:42 pm

Re: Edirol FA-66 Bus-Server Error

Postby Pingaloka on Sun May 06, 2012 7:12 pm

I also added my username to the audio group + other commands:

id
uid=1000(pingaloka) gid=1000(pingaloka) groups=1000(pingaloka),4(adm),20(dialout),24(cdrom),29(audio),46(plugdev),116(lpadmin),118(admin),125(sambashare)

Also:

ls -l /dev/fw*
crw------- 1 root root 251, 0 2012-05-06 23:42 /dev/fw0
crwxrwxrwx+ 1 root audio 251, 1 2012-05-06 23:42 /dev/fw1

Also:

grep . /sys/bus/firewire/devices/fw*/*_name


/sys/bus/firewire/devices/fw0/model_name:Juju
/sys/bus/firewire/devices/fw0/vendor_name:Linux Firewire
/sys/bus/firewire/devices/fw1.0/model_name:EDIROL FA-66
/sys/bus/firewire/devices/fw1/model_name:EDIROL FA-66
/sys/bus/firewire/devices/fw1/vendor_name:EDIROL
Pingaloka
Level 1
Level 1
 
Posts: 3
Joined: Sun May 06, 2012 6:42 pm

Re: Edirol FA-66 Bus-Server Error

Postby junglistric on Sat Mar 16, 2013 7:29 pm

This is basically the exact issue I am having, but on Ubuntu 12.10 and with a Focusrite Saffire. The only difference is that when I do ffado-test Discover, it tells me I have the wrong libffado library installed.

Any updates on this issue? Any help would be greatly appreciated. I think it is very close to being working, but perhaps there is an issue with the libffado versions 2.1.9999 and 2.999.0
junglistric
Level 1
Level 1
 
Posts: 1
Joined: Sat Mar 16, 2013 7:25 pm


Return to Software & Applications

Who is online

Users browsing this forum: Fraoch and 20 guests