Matrica Moneyplex2008 & Kobil EMV Cap Reader III [SOLVED]

Questions about applications and software
Forum rules
Before you post please read this

Matrica Moneyplex2008 & Kobil EMV Cap Reader III [SOLVED]

Postby rhvkl on Fri May 09, 2008 5:52 am

Well my Mint 4.0 is able to find the cardreader but didn't get it work in Moneyplex...

http://www.kobil.com/index.php?id=71&type=7&L=0
http://matrica.de/produkte/produktmpx.html

Do I need some other ct-api?
Attachments
Moneyplex2.jpg
Moneyplex error: test of the cardreader didn't success
Moneyplex2.jpg (143.35 KiB) Viewed 1280 times
Hardware.png
Hardware detail
Hardware.png (189.62 KiB) Viewed 1282 times
Last edited by rhvkl on Wed Jul 09, 2008 10:58 am, edited 1 time in total.
User avatar
rhvkl
Level 3
Level 3
 
Posts: 141
Joined: Sun May 04, 2008 4:36 pm

Linux Mint is funded by ads and donations.
 

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby Husse on Fri May 09, 2008 4:30 pm

Moneyplex seems to be a very specific program
I googled it and the third link from the top included Moneyplex crack - this makes me feel that I would not want to do my banking business with Moneyplex...
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19710
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby rhvkl on Sat May 10, 2008 10:51 am

Well ... with Moneyplex it's possible to do a lot of things, it's very mighty.

I've used it under Windows for 2 years and feel happy with this program, but if you can rate my another good one for Mint, i would give it a try.

I've tried GNU_Cash / Hibiscus ... very ugly skin in GNU_Cash und Hibiscus didn't work with my bank (with windows and i think it's the same with linux) ... any other?
User avatar
rhvkl
Level 3
Level 3
 
Posts: 141
Joined: Sun May 04, 2008 4:36 pm

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby rivenought on Sat May 10, 2008 11:10 am

KMyMoney is a very good financial program. It can be used with GNOME or KDE desktops. I have tried GNUcash and HomeBank, but KMyMoney is still a keeper for me. All I need is a basic check book/credit card register/ledger. It may be worth you testing out. Good luck.
rivenought
Level 5
Level 5
 
Posts: 780
Joined: Wed Apr 09, 2008 10:34 am

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby rhvkl on Sat May 10, 2008 3:10 pm

I looked at the KMyMoney homepage, but I didn't find a word about the Kobil-CardReader and HBCI Onlinebanking ...

Another suggestion would be to use: http://www.aquamaniac.de/sites/libchipcard/index.php which will detect some USB-CardReader, but I don''t know if this is really the problem ... because the cardreader in hardware looks good to me or doesn't it?
User avatar
rhvkl
Level 3
Level 3
 
Posts: 141
Joined: Sun May 04, 2008 4:36 pm

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby rhvkl on Mon May 19, 2008 5:49 am

Hi again ... because onlinebanking is very important for me, I have to solve this problem asap (as soon as possible).

I guess Moneyplex working fine, Kobil is detected correct in Hardware, but I haven't enough right's to handle the USB-connection to the chipcard-reader ... could this be a reason / solution?

---
had a view on KMyMoney and truly prefer Moneyplex :|

/perhaps moving to hardware discussion?
User avatar
rhvkl
Level 3
Level 3
 
Posts: 141
Joined: Sun May 04, 2008 4:36 pm

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby rhvkl on Wed May 21, 2008 9:21 am

OK I guess i would set full access to this USB device ... rwx ... but how and where?

Code: Select all
rhvkl@silentmaxx:~$ sudo chmod a+rw /dev/ttyUSB?
chmod: cannot access `/dev/ttyUSB?': No such file or directory
User avatar
rhvkl
Level 3
Level 3
 
Posts: 141
Joined: Sun May 04, 2008 4:36 pm

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby Gast on Fri May 23, 2008 2:15 pm

Hi rhvkl,
some suggestions:
do # dmesg |grep KOBIL
something like ttyUSB0 should appear - aside other lines.

My ~/.CT_devices looks like this:
GetPortType=#0
SetPortType=#0
DefaultPortType=#0
DefaultProtocollType=#0
UseOnlyDefaultProtocoll=#0
B1DTRLow=#50
B1DSRRespActive=#2000
PnPChar=#150
B1WaitForPnPString=#1500
KaanWaitForPnPString=#600
Port1=COM;/dev/ttyUSB0;2;0;serial reader at /dev/ttyUSB0: Kaan/SecOVID/TWIN
Port2=COM;/dev/ttyS1;1;0;serial reader at /dev/ttyS1: B1/Kaan Pro
Port3=COM;/dev/ttyS2;1;0;serial reader at /dev/ttyS2: B1/Kaan Pro
Port4=COM;/dev/ttyS3;1;0;serial reader at /dev/ttyS3: B1/Kaan Pro
UseOldStyleManufacturerDataObject=#0

and /etc/reader.conf like this (I have 2 Card Readers attached currently):

# Configuration file for IFD Handler 2.0 drivers
# FRIENDLYNAME: Any name
# DEVICENAME: Any name
# LIBPATH: Location of the driver library for your reader
# CHANNELID:
# 0x000001 - COM1
# 0x000002 - COM2
# 0x000003 - COM3
# 0x000004 - COM4
#

# KOBIL Kaan Standard, KOBIL Kaan Standard Plus,
# KOBIL Twin, KOBIL B1 Pro or KOBIL KAAN Pro (COM1)
FRIENDLYNAME "Kobil SecOVID Card Terminal"
DEVICENAME /dev/ttyUSB0:Kaan/SecOVID/TWIN
LIBPATH /usr/lib/kobil/libct_kobil.so
CHANNELID 0x000001

FRIENDLYNAME "Kobil Card Terminal"
DEVICENAME /dev/ttyS1:KOBIL_CARD_TERMINAL
LIBPATH /usr/lib/kobil/libct_kobil.so
CHANNELID 0x000002

# Note: Use the full path on LIBPATH.

Try to use the driver delivered with moneyplex (~/moneyplex/ctapi/libct_kobil.so).
If that failes download the driver from KOBIL web site -> DOWNLOAD -> Treiber: ct-linux.zip

contact me via PM if you need further assistance (n0bert0@aim.com)
Gast
 

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby rhvkl on Tue May 27, 2008 5:16 pm

Hi "Gast", PM doesn't work did it? =)
... I've done the control tasks, but I'm still clueless, what I've to change without killing my OS at once.

Step by step is something like this?
1) finding ttyUSB, right?
2) manual edit of the reader.conf expecially for config the kobil.so path
3) .CT_devices <-- no idea what to do with, sorry.


root@silentmaxx:/home/rhvkl# dmesg |grep KOBIL
root@silentmaxx:/home/rhvkl# gedit /var/log/dmesg

Code: Select all
[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 2175MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 786352) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   786352
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   786352
[    0.000000] On node 0 totalpages: 786352
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4351 pages used for memmap
[    0.000000]   HighMem zone: 552625 pages, LIFO batch:31
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FB230 checksum 0
[    0.000000] ACPI: RSDP 000FB230, 0024 (r2 ACPIAM)
[    0.000000] ACPI: XSDT BFFB0100, 0044 (r1 A M I  OEMXSDT  10000426 MSFT       97)
[    0.000000] ACPI: FACP BFFB0290, 00F4 (r3 A M I  OEMFACP  10000426 MSFT       97)
[    0.000000] ACPI: DSDT BFFB0400, 6758 (r1  A0085 A0085009        9 INTL  2002026)
[    0.000000] ACPI: FACS BFFBE000, 0040
[    0.000000] ACPI: APIC BFFB0390, 0070 (r1 A M I  OEMAPIC  10000426 MSFT       97)
[    0.000000] ACPI: OEMB BFFBE040, 0046 (r1 A M I  AMI_OEM  10000426 MSFT       97)
[    0.000000] ACPI: MCFG BFFB6B60, 003C (r1 A M I  OEMMCFG  10000426 MSFT       97)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:4 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000)
[    0.000000] Built 1 zonelists.  Total pages: 780209
[    0.000000] Kernel command line: root=/dev/sda2 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 3010.870 MHz processor.
[   45.152542] Console: colour VGA+ 80x25
[   45.152804] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   45.153112] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   45.320473] Memory: 3105768k/3145408k available (2015k kernel code, 38348k reserved, 915k data, 364k init, 2227904k highmem)
[   45.320484] virtual kernel memory layout:
[   45.320485]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   45.320487]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   45.320488]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   45.320489]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   45.320490]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   45.320491]       .data : 0xc02f7e86 - 0xc03dce84   ( 915 kB)
[   45.320492]       .text : 0xc0100000 - 0xc02f7e86   (2015 kB)
[   45.320495] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   45.320532] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   45.400529] Calibrating delay using timer specific routine.. 6026.91 BogoMIPS (lpj=12053830)
[   45.400554] Security Framework v1.0.0 initialized
[   45.400559] SELinux:  Disabled at boot.
[   45.400572] Mount-cache hash table entries: 512
[   45.400693] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[   45.400701] monitor/mwait feature present.
[   45.400703] using mwait in idle threads.
[   45.400710] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   45.400713] CPU: L2 cache: 1024K
[   45.400715] CPU: Physical Processor ID: 0
[   45.400718] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000
[   45.400727] Compat vDSO mapped to ffffe000.
[   45.400743] Checking 'hlt' instruction... OK.
[   45.416618] SMP alternatives: switching to UP code
[   45.417033] Early unpacking initramfs... done
[   45.749909] ACPI: Core revision 20070126
[   45.749966] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   45.763713] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[   45.763731] SMP alternatives: switching to SMP code
[   45.763822] Booting processor 1/1 eip 3000
[   45.774025] Initializing CPU#1
[   45.852387] Calibrating delay using timer specific routine.. 6021.81 BogoMIPS (lpj=12043620)
[   45.852396] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[   45.852403] monitor/mwait feature present.
[   45.852409] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   45.852412] CPU: L2 cache: 1024K
[   45.852415] CPU: Physical Processor ID: 0
[   45.852417] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000
[   45.852791] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[   45.852831] Total of 2 processors activated (12048.72 BogoMIPS).
[   45.852978] ENABLING IO-APIC IRQs
[   45.853159] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   46.000450] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   46.020459] Brought up 2 CPUs
[   46.094403] migration_cost=88
[   46.094567] Booting paravirtualized kernel on bare hardware
[   46.094631] Time: 21:54:20  Date: 04/24/108
[   46.094655] NET: Registered protocol family 16
[   46.094742] EISA bus registered
[   46.094747] ACPI: bus type pci registered
[   46.094987] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=5
[   46.094989] PCI: Using configuration type 1
[   46.094991] Setting up standard PCI resources
[   46.109009] ACPI: EC: Look up EC in DSDT
[   46.117092] ACPI: Interpreter enabled
[   46.117096] ACPI: (supports S0 S1 S3 S4 S5)
[   46.117119] ACPI: Using IOAPIC for interrupt routing
[   46.125294] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   46.125312] PCI: Probing PCI hardware (bus 00)
[   46.125883] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   46.125887] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   46.127361] PCI: Transparent bridge - 0000:00:1e.0
[   46.127431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   46.127587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   46.127661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[   46.127800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   46.127874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[   46.127946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[   46.130950] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   46.131074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   46.131196] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   46.131316] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[   46.131436] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[   46.131558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[   46.131678] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   46.131798] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   46.131914] Linux Plug and Play Support v0.97 (c) Adam Belay
[   46.131925] pnp: PnP ACPI init
[   46.131934] ACPI: bus type pnp registered
[   46.137271] pnp: PnP ACPI: found 17 devices
[   46.137274] ACPI: ACPI bus type pnp unregistered
[   46.137279] PnPBIOS: Disabled by ACPI PNP
[   46.137339] PCI: Using ACPI for IRQ routing
[   46.137343] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   46.158039] NET: Registered protocol family 8
[   46.158042] NET: Registered protocol family 20
[   46.158109] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[   46.158119] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[   46.158127] pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   46.158130] pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[   46.158133] pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[   46.158137] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[   46.158142] pnp: 00:0a: ioport range 0x3f6-0x3f6 has been reserved
[   46.158150] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[   46.158153] pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[   46.158159] pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[   46.158164] pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[   46.158170] pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
[   46.158173] pnp: 00:10: iomem range 0x0-0x0 could not be reserved
[   46.158176] pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved
[   46.158179] pnp: 00:10: iomem range 0x100000-0xbfffffff could not be reserved
[   46.160310] Time: tsc clocksource has been installed.
[   46.188544] PCI: Bridge: 0000:00:01.0
[   46.188547]   IO window: e000-efff
[   46.188552]   MEM window: cff00000-cfffffff
[   46.188556]   PREFETCH window: d0000000-dfffffff
[   46.188560] PCI: Bridge: 0000:00:1c.0
[   46.188563]   IO window: d000-dfff
[   46.188568]   MEM window: disabled.
[   46.188572]   PREFETCH window: disabled.
[   46.188577] PCI: Bridge: 0000:00:1c.1
[   46.188580]   IO window: c000-cfff
[   46.188585]   MEM window: cfe00000-cfefffff
[   46.188589]   PREFETCH window: disabled.
[   46.188594] PCI: Bridge: 0000:00:1c.2
[   46.188597]   IO window: b000-bfff
[   46.188602]   MEM window: cfd00000-cfdfffff
[   46.188606]   PREFETCH window: disabled.
[   46.188612] PCI: Bridge: 0000:00:1e.0
[   46.188615]   IO window: 9000-afff
[   46.188620]   MEM window: cfc00000-cfcfffff
[   46.188625]   PREFETCH window: c4000000-c40fffff
[   46.188644] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   46.188650] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   46.188668] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[   46.188673] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   46.188692] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[   46.188697] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   46.188716] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[   46.188722] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   46.188733] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   46.188744] NET: Registered protocol family 2
[   46.228466] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   46.228534] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   46.229375] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   46.229618] TCP: Hash tables configured (established 131072 bind 65536)
[   46.229621] TCP reno registered
[   46.240630] checking if image is initramfs... it is
[   46.688451] Switched to high resolution mode on CPU 1
[   46.692333] Switched to high resolution mode on CPU 0
[   46.900326] Freeing initrd memory: 9009k freed
[   46.900861] audit: initializing netlink socket (disabled)
[   46.900873] audit(1211666060.212:1): initialized
[   46.900975] highmem bounce pool size: 64 pages
[   46.903274] VFS: Disk quotas dquot_6.5.1
[   46.903335] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   46.903428] io scheduler noop registered
[   46.903431] io scheduler anticipatory registered
[   46.903433] io scheduler deadline registered
[   46.903449] io scheduler cfq registered (default)
[   46.903539] Boot video device is 0000:05:00.0
[   46.903672] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   46.903713] assign_interrupt_mode Found MSI capability
[   46.903716] Allocate Port Service[0000:00:01.0:pcie00]
[   46.903808] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   46.903851] assign_interrupt_mode Found MSI capability
[   46.903853] Allocate Port Service[0000:00:1c.0:pcie00]
[   46.903891] Allocate Port Service[0000:00:1c.0:pcie02]
[   46.903981] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   46.904024] assign_interrupt_mode Found MSI capability
[   46.904027] Allocate Port Service[0000:00:1c.1:pcie00]
[   46.904077] Allocate Port Service[0000:00:1c.1:pcie02]
[   46.904169] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   46.904212] assign_interrupt_mode Found MSI capability
[   46.904215] Allocate Port Service[0000:00:1c.2:pcie00]
[   46.904254] Allocate Port Service[0000:00:1c.2:pcie02]
[   46.904428] isapnp: Scanning for PnP cards...
[   47.255980] isapnp: No Plug & Play device found
[   47.282539] Real Time Clock Driver v1.12ac
[   47.282636] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   47.282732] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   47.283445] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   47.284228] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   47.284457] input: Macintosh mouse button emulation as /class/input/input0
[   47.284549] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[   47.284552] PNP: PS/2 controller doesn't have KBD irq; using default 1
[   47.287223] serio: i8042 KBD port at 0x60,0x64 irq 1
[   47.287230] serio: i8042 AUX port at 0x60,0x64 irq 12
[   47.287413] mice: PS/2 mouse device common for all mice
[   47.287543] EISA: Probing bus 0 at eisa.0
[   47.287569] Cannot allocate resource for EISA slot 7
[   47.287572] Cannot allocate resource for EISA slot 8
[   47.287574] EISA: Detected 0 cards.
[   47.287647] TCP cubic registered
[   47.287658] NET: Registered protocol family 1
[   47.287679] Using IPI No-Shortcut mode
[   47.287856]   Magic number: 8:915:955
[   47.287947]   hash matches device ptyzc
[   47.288184] Freeing unused kernel memory: 364k freed
[   48.502900] fuse init (API version 7.8)
[   48.508600] Capability LSM initialized
[   48.517261] ACPI: Processor [CPU1] (supports 8 throttling states)
[   49.099605] usbcore: registered new interface driver usbfs
[   49.099639] usbcore: registered new interface driver hub
[   49.099679] usbcore: registered new device driver usb
[   49.101266] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[   49.101280] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   49.101285] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   49.101411] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   49.101445] ehci_hcd 0000:00:1d.7: debug port 1
[   49.101453] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   49.101465] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xcfbff800
[   49.105384] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   49.105515] usb usb1: configuration #1 chosen from 1 choice
[   49.105559] hub 1-0:1.0: USB hub found
[   49.105568] hub 1-0:1.0: 8 ports detected
[   49.124601] USB Universal Host Controller Interface driver v3.0
[   49.135139] SCSI subsystem initialized
[   49.143571] libata version 2.21 loaded.
[   49.207435] ACPI: PCI Interrupt 0000:01:09.2[C] -> GSI 19 (level, low) -> IRQ 20
[   49.207459] ehci_hcd 0000:01:09.2: EHCI Host Controller
[   49.207497] ehci_hcd 0000:01:09.2: new USB bus registered, assigned bus number 2
[   49.207552] ehci_hcd 0000:01:09.2: irq 20, io mem 0xcfcffc00
[   49.207564] ehci_hcd 0000:01:09.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[   49.207689] usb usb2: configuration #1 chosen from 1 choice
[   49.207735] hub 2-0:1.0: USB hub found
[   49.207746] hub 2-0:1.0: 4 ports detected
[   49.207785] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[   49.207797] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   49.207802] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   49.311481] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   49.311513] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00007000
[   49.311669] usb usb3: configuration #1 chosen from 1 choice
[   49.311711] hub 3-0:1.0: USB hub found
[   49.311720] hub 3-0:1.0: 2 ports detected
[   49.337791] Floppy drive(s): fd0 is 1.44M
[   49.387181] FDC 0 is a post-1991 82077
[   49.415309] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[   49.415323] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   49.415329] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   49.415367] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   49.415396] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00007080
[   49.415537] usb usb4: configuration #1 chosen from 1 choice
[   49.415579] hub 4-0:1.0: USB hub found
[   49.415588] hub 4-0:1.0: 2 ports detected
[   49.519245] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   49.519259] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   49.519265] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   49.519297] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[   49.519328] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007400
[   49.519464] usb usb5: configuration #1 chosen from 1 choice
[   49.519505] hub 5-0:1.0: USB hub found
[   49.519515] hub 5-0:1.0: 2 ports detected
[   49.623192] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   49.623205] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   49.623211] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   49.623247] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
[   49.623280] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00007480
[   49.623411] usb usb6: configuration #1 chosen from 1 choice
[   49.623451] hub 6-0:1.0: USB hub found
[   49.623459] hub 6-0:1.0: 2 ports detected
[   49.727183] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 17
[   49.727197] uhci_hcd 0000:01:09.0: UHCI Host Controller
[   49.727231] uhci_hcd 0000:01:09.0: new USB bus registered, assigned bus number 7
[   49.727263] uhci_hcd 0000:01:09.0: irq 17, io base 0x0000a880
[   49.727396] usb usb7: configuration #1 chosen from 1 choice
[   49.727437] hub 7-0:1.0: USB hub found
[   49.727446] hub 7-0:1.0: 2 ports detected
[   49.831131] ACPI: PCI Interrupt 0000:01:09.1[B] -> GSI 18 (level, low) -> IRQ 18
[   49.831147] uhci_hcd 0000:01:09.1: UHCI Host Controller
[   49.831180] uhci_hcd 0000:01:09.1: new USB bus registered, assigned bus number 8
[   49.831206] uhci_hcd 0000:01:09.1: irq 18, io base 0x0000ac00
[   49.831365] usb usb8: configuration #1 chosen from 1 choice
[   49.831407] hub 8-0:1.0: USB hub found
[   49.831417] hub 8-0:1.0: 2 ports detected
[   49.935130] ata_piix 0000:00:1f.1: version 2.11
[   49.935148] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   49.935183] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   49.935256] scsi0 : ata_piix
[   49.935309] scsi1 : ata_piix
[   49.935469] ata1: PATA max UDMA/100 cmd 0x00018080 ctl 0x00018002 bmdma 0x00017800 irq 18
[   49.935475] ata2: PATA max UDMA/100 cmd 0x00017c00 ctl 0x00017882 bmdma 0x00017808 irq 18
[   50.350830] usb 2-1: new high speed USB device using ehci_hcd and address 2
[   50.423413] ata1.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-115  0127, E1.27, max UDMA/33
[   50.423419] ata1.01: ATAPI: PIONEER DVD-RW  DVR-109, 1.58, max UDMA/66
[   50.535396] usb 2-1: configuration #2 chosen from 1 choice
[   50.606087] ata1.00: configured for UDMA/33
[   50.774691] usb 2-2: new high speed USB device using ehci_hcd and address 3
[   50.785061] ata1.01: configured for UDMA/66
[   50.785091] ata2: port disabled. ignoring.
[   50.786490] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-ROM DVD-115  1.27 PQ: 0 ANSI: 5
[   50.793271] scsi 0:0:1:0: CD-ROM            PIONEER  DVD-RW  DVR-109  1.58 PQ: 0 ANSI: 5
[   50.793348] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   50.793380] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[   50.793417] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   50.793462] scsi2 : ata_piix
[   50.793522] scsi3 : ata_piix
[   50.793571] ata3: SATA max UDMA/133 cmd 0x00018c00 ctl 0x00018882 bmdma 0x00018400 irq 20
[   50.793576] ata4: SATA max UDMA/133 cmd 0x00018800 ctl 0x00018482 bmdma 0x00018408 irq 20
[   50.909173] usb 2-2: configuration #1 chosen from 1 choice
[   50.963804] ata3.00: ATA-7: Maxtor 7V250F0, VA111630, max UDMA/133
[   50.963809] ata3.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   50.965043] ata3.01: ATA-7: Maxtor 7V320F0, VA111900, max UDMA/133
[   50.965046] ata3.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   50.979802] ata3.00: configured for UDMA/133
[   50.995787] ata3.01: configured for UDMA/133
[   51.166926] ata4.00: ATA-7: Maxtor 6Y250M0, YAR51EW0, max UDMA/133
[   51.166930] ata4.00: 490234752 sectors, multi 16: LBA48
[   51.167140] ata4.01: ATA-7: Maxtor 7Y250M0, YAR51HW0, max UDMA/133
[   51.167143] ata4.01: 490234752 sectors, multi 16: LBA48
[   51.182896] ata4.00: configured for UDMA/133
[   51.198902] ata4.01: configured for UDMA/133
[   51.199019] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 7V250F0   VA11 PQ: 0 ANSI: 5
[   51.199176] scsi 2:0:1:0: Direct-Access     ATA      Maxtor 7V320F0   VA11 PQ: 0 ANSI: 5
[   51.199322] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y250M0   YAR5 PQ: 0 ANSI: 5
[   51.199466] scsi 3:0:1:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
[   51.200660] sata_sil 0000:01:05.0: version 2.2
[   51.200719] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 22 (level, low) -> IRQ 21
[   51.200795] scsi4 : sata_sil
[   51.201083] scsi5 : sata_sil
[   51.201396] scsi6 : sata_sil
[   51.201687] scsi7 : sata_sil
[   51.201948] ata5: SATA max UDMA/100 cmd 0xf8838880 ctl 0xf883888a bmdma 0xf8838800 irq 21
[   51.201955] ata6: SATA max UDMA/100 cmd 0xf88388c0 ctl 0xf88388ca bmdma 0xf8838808 irq 21
[   51.201960] ata7: SATA max UDMA/100 cmd 0xf8838a80 ctl 0xf8838a8a bmdma 0xf8838a00 irq 21
[   51.201966] ata8: SATA max UDMA/100 cmd 0xf8838ac0 ctl 0xf8838aca bmdma 0xf8838a08 irq 21
[   51.386554] usbcore: registered new interface driver libusual
[   51.396429] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   51.396437] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   51.399166] Initializing USB Mass Storage driver...
[   51.514437] ata5: SATA link down (SStatus 0 SControl 310)
[   51.626378] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   51.808753] usb 3-2: configuration #1 chosen from 1 choice
[   51.826308] ata6: SATA link down (SStatus 0 SControl 310)
[   52.050236] usb 4-2: new full speed USB device using uhci_hcd and address 2
[   52.134209] ata7: SATA link down (SStatus 0 SControl 310)
[   52.446097] ata8: SATA link down (SStatus 0 SControl 310)
[   52.446148] pata_it821x: controller in pass through mode.
[   52.446174] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 23 (level, low) -> IRQ 19
[   52.446219] PCI: Setting latency timer of device 0000:01:04.0 to 64
[   52.446276] scsi8 : pata_it821x
[   52.448248] scsi9 : pata_it821x
[   52.448450] ata9: PATA max UDMA/133 cmd 0x00019c00 ctl 0x00019882 bmdma 0x00019400 irq 19
[   52.448454] ata10: PATA max UDMA/133 cmd 0x00019800 ctl 0x00019482 bmdma 0x00019408 irq 19
[   52.786490] ata9.01: ATAPI: IOMEGA  ZIP 250       ATAPI, 42.S, max UDMA/33, CDB intr
[   52.786497] ata9.01: device is on DMA blacklist, disabling DMA
[   52.958214] ata9.01: configured for PIO3
[   53.127824] scsi 8:0:1:0: Direct-Access     IOMEGA   ZIP 250          42.S PQ: 0 ANSI: 5
[   53.129834] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 22
[   53.186320] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[cfcff000-cfcff7ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
[   53.195842] sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
[   53.195849] Uniform CD-ROM driver Revision: 3.20
[   53.195916] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   53.197830] sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[   53.201828] sd 2:0:0:0: [sda] Write Protect is off
[   53.201833] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   53.202510] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.205848] sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
[   53.205871] sd 2:0:0:0: [sda] Write Protect is off
[   53.205874] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   53.205896] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.205901]  sda:sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   53.227166] sr 0:0:1:0: Attached scsi CD-ROM sr1
[   53.228004]  sda1 sda2 sda3
[   53.228491] sd 2:0:0:0: [sda] Attached SCSI disk
[   53.228565] sd 2:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   53.228582] sd 2:0:1:0: [sdb] Write Protect is off
[   53.228586] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   53.228615] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.228669] sd 2:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[   53.228686] sd 2:0:1:0: [sdb] Write Protect is off
[   53.228690] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   53.228720] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.228725]  sdb: sdb1
[   53.248021] sd 2:0:1:0: [sdb] Attached SCSI disk
[   53.248096] sd 3:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
[   53.248113] sd 3:0:0:0: [sdc] Write Protect is off
[   53.248117] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   53.248144] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.248194] sd 3:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB)
[   53.248210] sd 3:0:0:0: [sdc] Write Protect is off
[   53.248214] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   53.248243] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.248248]  sdc: sdc1 < sdc5 >
[   53.266520] sd 3:0:0:0: [sdc] Attached SCSI disk
[   53.266587] sd 3:0:1:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
[   53.266603] sd 3:0:1:0: [sdd] Write Protect is off
[   53.266607] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[   53.266634] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.266690] sd 3:0:1:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
[   53.266706] sd 3:0:1:0: [sdd] Write Protect is off
[   53.266710] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[   53.266738] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   53.266742]  sdd: sdd1
[   53.275613] sd 3:0:1:0: [sdd] Attached SCSI disk
[   53.278403] sd 8:0:1:0: [sde] Attached SCSI removable disk
[   53.284604] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   53.284634] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   53.284664] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   53.284696] sd 2:0:1:0: Attached scsi generic sg3 type 0
[   53.284727] sd 3:0:0:0: Attached scsi generic sg4 type 0
[   53.284759] sd 3:0:1:0: Attached scsi generic sg5 type 0
[   53.284788] sd 8:0:1:0: Attached scsi generic sg6 type 0
[   53.694491] Attempting manual resume
[   53.694496] swsusp: Resume From Partition 8:1
[   53.694498] PM: Checking swsusp image.
[   53.702582] PM: Resume from disk failed.
[   53.726660] kjournald starting.  Commit interval 5 seconds
[   53.726672] EXT3-fs: mounted filesystem with ordered data mode.
[   54.461509] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000c6aa9a]
[   57.247682] usb 4-2: configuration #1 chosen from 1 choice
[   57.488301] usb 6-1: new full speed USB device using uhci_hcd and address 2
[   57.773435] usb 6-1: configuration #1 chosen from 1 choice
[   58.016135] usb 6-2: new full speed USB device using uhci_hcd and address 3
[   58.178227] usb 6-2: configuration #1 chosen from 1 choice
[   58.679892] usb 8-1: new full speed USB device using uhci_hcd and address 2
[   58.706072] ip_tables: (C) 2000-2006 Netfilter Core Team
[   58.737938] Netfilter messages via NETLINK v0.30.
[   58.746219] nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
[   58.846159] usb 8-1: configuration #1 chosen from 1 choice
[   59.091737] usb 8-2: new full speed USB device using uhci_hcd and address 3
[   59.259055] usb 8-2: configuration #1 chosen from 1 choice
[   59.262213] usbcore: registered new interface driver hiddev
[   59.262324] scsi10 : SCSI emulation for USB Mass Storage devices
[   59.262391] usb-storage: device found at 2
[   59.262394] usb-storage: waiting for device to settle before scanning
[   59.262445] scsi11 : SCSI emulation for USB Mass Storage devices
[   59.262497] usb-storage: device found at 3
[   59.262500] usb-storage: waiting for device to settle before scanning
[   59.276232] input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input1
[   59.276252] input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-2
[   59.297069] input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input2
[   59.297084] input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-2
[   59.297115] usbcore: registered new interface driver usbhid
[   59.297120] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   59.297303] usbcore: registered new interface driver usb-storage
[   59.297307] USB Mass Storage support registered.
[   61.238034] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   61.553944] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   61.569275] intel_rng: FWH not detected
[   61.610134] iTCO_vendor_support: vendor-support=0
[   61.611522] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   61.611617] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
[   61.611674] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   62.312312] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   62.312331] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   62.312363] sky2 0000:03:00.0: v1.18 addr 0xcfefc000 irq 17 Yukon-EC (0xb6) rev 1
[   62.313158] sky2 eth0: addr 00:11:d8:30:d4:db
[   62.313188] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   62.313202] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   62.313230] sky2 0000:02:00.0: v1.18 addr 0xcfdfc000 irq 18 Yukon-EC (0xb6) rev 1
[   62.313363] sky2 eth1: addr 00:11:d8:30:d5:ba
[   62.374177] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[   62.376769] parport_pc 00:07: reported by Plug and Play ACPI
[   62.376879] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   62.520771] input: PC Speaker as /class/input/input4
[   63.045416] irda_init()
[   63.045433] NET: Registered protocol family 23
[   63.074678] usbcore: registered new interface driver xpad
[   63.074685] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[   63.180751] Linux video capture interface: v2.00
[   63.229676] SigmaTel STIr4200 IRDA/USB found at address 3, Vendor: 66f, Product: 4200
[   63.229784] /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/irda/stir4200.c: IrDA: Registered SigmaTel device irda0
[   63.229806] usbcore: registered new interface driver stir4200
[   63.236831] pwc: Philips webcam module version 10.0.13 loaded.
[   63.236836] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[   63.236840] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[   63.236844] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[   63.236921] pwc: Logitech QuickCam Orbit/Sphere USB webcam detected.
[   63.236979] pwc: Registered as /dev/video0.
[   63.247337] usbcore: registered new interface driver Philips webcam
[   63.515506] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   63.515529] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   63.714545] usbcore: registered new interface driver snd-usb-audio
[   64.258109] usb-storage: device scan complete
[   64.258120] usb-storage: device scan complete
[   64.258727] scsi 11:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[   64.259225] scsi 11:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[   64.259723] scsi 11:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[   64.260223] scsi 11:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[   64.261510] sd 11:0:0:0: [sdf] Attached SCSI removable disk
[   64.261572] sd 11:0:0:0: Attached scsi generic sg7 type 0
[   64.262383] sd 11:0:0:1: [sdg] Attached SCSI removable disk
[   64.262439] sd 11:0:0:1: Attached scsi generic sg8 type 0
[   64.263385] sd 11:0:0:2: [sdh] Attached SCSI removable disk
[   64.263442] sd 11:0:0:2: Attached scsi generic sg9 type 0
[   64.264392] sd 11:0:0:3: [sdi] Attached SCSI removable disk
[   64.264457] sd 11:0:0:3: Attached scsi generic sg10 type 0
[   64.532975] lp0: using parport0 (interrupt-driven).
[   64.592551] Adding 2996080k swap on /dev/sda1.  Priority:-1 extents:1 across:2996080k
[   64.921081] EXT3 FS on sda2, internal journal
[   65.646945] kjournald starting.  Commit interval 5 seconds
[   65.647202] EXT3 FS on sda3, internal journal
[   65.647208] EXT3-fs: mounted filesystem with ordered data mode.


... didn't find KOBIL or ttyUSB in the text?


.CT_devices

Code: Select all
GetPortType=#0
SetPortType=#0
DefaultPortType=#0
DefaultProtocollType=#0
UseOnlyDefaultProtocoll=#0
B1DTRLow=#50
B1DSRRespActive=#2000
PnPChar=#150
B1WaitForPnPString=#1500
KaanWaitForPnPString=#600
LogLevel=#0
LogfileName=~/ctapilog.log
Port1=PCSC;[IDX="1"];3;0;reader via PCSC [IDX="1"]: transparent
UseOldStyleManufacturerDataObject=#0
AdaptInsertionPosition=#1
AdaptPIN2Block=#1



root@silentmaxx:/home/rhvkl# gedit /etc/reader.conf

Code: Select all
# Configuration file for IFD Handler 2.0 drivers
# FRIENDLYNAME: Any name
# DEVICENAME: Any name
# LIBPATH: Location of the driver library for your reader
# CHANNELID:
#             0x000001 - COM1
#             0x000002 - COM2
#             0x000003 - COM3
#             0x000004 - COM4
#

# KOBIL Kaan Standard, KOBIL Kaan Standard Plus,
# KOBIL Twin, KOBIL B1 Pro or KOBIL KAAN Pro (COM1)
FRIENDLYNAME   "Kobil Card Terminal"
DEVICENAME   KOBIL_CARD_TERMINAL
LIBPATH    /usr/lib/libkobil_ifd.so
CHANNELID   0x000001

# Note: Use the full path on LIBPATH.
User avatar
rhvkl
Level 3
Level 3
 
Posts: 141
Joined: Sun May 04, 2008 4:36 pm

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III

Postby Gast on Thu Jun 05, 2008 1:10 pm

please upgrade to kernel >2.6.24 - that should work
I do not run a 2.6.22 kernel, never tried the kobil USB card reader with it. As far as I googled you need to patch the kernel to fix the problem with 2.6.22 kernel and KOBIL USB card reader.

PM with the given email address should work if you copy/paste the address...(0=zero, NOT O)

cheers
Bert
Gast
 

Re: Matrica Moneyplex2008 & Kobil EMV Cap Reader III [solved]

Postby rhvkl on Wed Jul 09, 2008 10:57 am

I searched a long time for the solution, but it's quite simple install the daemon from the kobil.de site, update a lib*6 package, relink the driver from the homepage in the moneyplex dir ...
that's it.

Thanks for all your help!!!! --> solved
User avatar
rhvkl
Level 3
Level 3
 
Posts: 141
Joined: Sun May 04, 2008 4:36 pm

Linux Mint is funded by ads and donations.
 

Return to Software & Applications

Who is online

Users browsing this forum: pittendrigh, Susan365 and 10 guests