Hi all and thank you for this great place to use and discuss Linux Mint. I have installed LM final and really love it
Unfortunately, I still have a problem with Parallels 2.2 compiling. The following is the output of the error message:
Fame is a vapor; popularity an accident; the only earthly certainty is
oblivion.
-- Mark Twain
paul@paul-linuxmint:~$ sudo parallels-config
[: 141: ==: unexpected operator
Compiling Parallels Workstation 2.2 drivers...
Drivers have been compiled successfully.
/usr/bin/parallels-config: 175: pushd: not found
/usr/bin/parallels-config: 186: popd: not found
Installing drivers...
Starting drivers...
/usr/lib/parallels/autostart/drivers_start: 19: Syntax error: "(" unexpected
Parallels Workstation drivers were successfully configured
and compiled but cannot be started (insmod command failed).
Run 'dmesg' command for more information.
exit: 3: Illegal number: -1
paul@paul-linuxmint:~$ dmesg
[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[17179569.184000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 126MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f37a0
[17179569.184000] On node 0 totalpages: 261872
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32496 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 P4M80P ) @ 0x000f7930
[17179569.184000] ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040
[17179569.184000] ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0
[17179569.184000] ACPI: MADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef8080
[17179569.184000] ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:3 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:3 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2800.584 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.692000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.692000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.724000] Memory: 1028364k/1047488k available (1911k kernel code, 18400k reserved, 1073k data, 308k init, 129984k highmem)
[17179571.724000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179571.804000] Calibrating delay using timer specific routine.. 5608.45 BogoMIPS (lpj=11216902)
[17179571.804000] Security Framework v1.0.0 initialized
[17179571.804000] SELinux: Disabled at boot.
[17179571.804000] Mount-cache hash table entries: 512
[17179571.804000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179571.804000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179571.804000] monitor/mwait feature present.
[17179571.804000] using mwait in idle threads.
[17179571.804000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.804000] CPU: L2 cache: 1024K
[17179571.804000] CPU: Hyper-Threading is disabled
[17179571.804000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
[17179571.804000] Checking 'hlt' instruction... OK.
[17179571.820000] SMP alternatives: switching to UP code
[17179571.820000] checking if image is initramfs... it is
[17179572.328000] Freeing initrd memory: 5590k freed
[17179572.328000] ACPI: Core revision 20060707
[17179572.332000] ACPI: Looking for DSDT ... not found!
[17179572.340000] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
[17179572.340000] SMP alternatives: switching to SMP code
[17179572.340000] Booting processor 1/1 eip 3000
[17179572.348000] Initializing CPU#1
[17179572.428000] Calibrating delay using timer specific routine.. 5600.64 BogoMIPS (lpj=11201289)
[17179572.428000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179572.428000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179572.428000] monitor/mwait feature present.
[17179572.428000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.428000] CPU: L2 cache: 1024K
[17179572.428000] CPU: Hyper-Threading is disabled
[17179572.428000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
[17179572.428000] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
[17179572.428000] Total of 2 processors activated (11209.09 BogoMIPS).
[17179572.428000] ENABLING IO-APIC IRQs
[17179572.428000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.576000] checking TSC synchronization across 2 CPUs: passed.
[17179572.580000] Brought up 2 CPUs
[17179572.660000] migration_cost=4000
[17179572.660000] NET: Registered protocol family 16
[17179572.660000] EISA bus registered
[17179572.660000] ACPI: bus type pci registered
[17179572.664000] PCI: PCI BIOS revision 2.10 entry at 0xf9f30, last bus=1
[17179572.664000] PCI: Using configuration type 1
[17179572.664000] Setting up standard PCI resources
[17179572.680000] ACPI: Interpreter enabled
[17179572.680000] ACPI: Using IOAPIC for interrupt routing
[17179572.680000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.680000] PCI: Probing PCI hardware (bus 00)
[17179572.684000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
[17179572.684000] PCI: Quirk-MSI-K8T Soundcard On
[17179572.684000] PCI: Unexpected Value in PCI-Register: no Change!
[17179572.684000] Boot video device is 0000:01:00.0
[17179572.684000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.740000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[17179572.740000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[17179572.740000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[17179572.740000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179572.744000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179572.744000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179572.744000] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[17179572.744000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[17179572.744000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[17179572.744000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[17179572.748000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.748000] pnp: PnP ACPI init
[17179572.752000] pnp: PnP ACPI: found 14 devices
[17179572.752000] PnPBIOS: Disabled by ACPI PNP
[17179572.752000] PCI: Using ACPI for IRQ routing
[17179572.752000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179572.764000] pnp: 00:02: ioport range 0x400-0x47f could not be reserved
[17179572.764000] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[17179572.764000] PCI: Bridge: 0000:00:01.0
[17179572.764000] IO window: b000-bfff
[17179572.764000] MEM window: fde00000-fdefffff
[17179572.764000] PREFETCH window: d0000000-efffffff
[17179572.764000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.764000] NET: Registered protocol family 2
[17179572.804000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.804000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179572.804000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179572.804000] TCP: Hash tables configured (established 131072 bind 65536)
[17179572.804000] TCP reno registered
[17179572.804000] audit: initializing netlink socket (disabled)
[17179572.804000] audit(1177169360.804:1): initialized
[17179572.808000] highmem bounce pool size: 64 pages
[17179572.808000] VFS: Disk quotas dquot_6.5.1
[17179572.808000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.808000] Initializing Cryptographic API
[17179572.808000] io scheduler noop registered
[17179572.808000] io scheduler anticipatory registered
[17179572.808000] io scheduler deadline registered
[17179572.808000] io scheduler cfq registered (default)
[17179580.808000] 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[17179580.808000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179580.808000] isapnp: Scanning for PnP cards...
[17179581.160000] isapnp: No Plug & Play device found
[17179581.188000] Real Time Clock Driver v1.12ac
[17179581.188000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179581.188000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179581.188000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179581.188000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179581.188000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179581.188000] mice: PS/2 mouse device common for all mice
[17179581.188000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179581.192000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179581.192000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179581.192000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179581.192000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179581.192000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179581.192000] EISA: Probing bus 0 at eisa.0
[17179581.192000] EISA: Detected 0 cards.
[17179581.192000] TCP bic registered
[17179581.192000] NET: Registered protocol family 1
[17179581.192000] NET: Registered protocol family 8
[17179581.192000] NET: Registered protocol family 20
[17179581.192000] Starting balanced_irq
[17179581.192000] Using IPI No-Shortcut mode
[17179581.192000] ACPI: (supports S0 S1 S4 S5)
[17179581.192000] Freeing unused kernel memory: 308k freed
[17179581.212000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179582.280000] Capability LSM initialized
[17179582.320000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179582.320000] ACPI: Getting cpuindex for acpiid 0x2
[17179582.320000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179582.320000] ACPI: Getting cpuindex for acpiid 0x3
[17179582.792000] SCSI subsystem initialized
[17179582.796000] libata version 1.20 loaded.
[17179582.796000] sata_via 0000:00:0f.0: version 1.1
[17179582.796000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179582.796000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179582.796000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
[17179582.796000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179582.796000] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[17179582.796000] ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xF802 bmdma 0xEC00 irq 169
[17179582.796000] ata2: SATA max UDMA/133 cmd 0xF400 ctl 0xF002 bmdma 0xEC08 irq 169
[17179582.960000] scsi0 : sata_via
[17179583.124000] scsi1 : sata_via
[17179583.192000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179583.192000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179583.192000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179583.192000] VP_IDE: chipset revision 6
[17179583.192000] VP_IDE: not 100% native mode: will probe irqs later
[17179583.192000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179583.192000] ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio
[17179583.192000] ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA
[17179583.192000] Probing IDE interface ide0...
[17179583.608000] hda: WDC WD400BB-00DEA0, ATA DISK drive
[17179584.280000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179584.300000] Probing IDE interface ide1...
[17179585.164000] hdc: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive
[17179585.948000] hdd: ARTEC WRR-52X 2.25 20030606, ATAPI CD/DVD-ROM drive
[17179586.004000] ide1 at 0x170-0x177,0x376 on irq 15
[17179586.032000] hda: max request size: 128KiB
[17179586.032000] hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(44)
[17179586.032000] Uniform CD-ROM driver Revision: 3.20
[17179586.032000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[17179586.032000] hda: cache flushes not supported
[17179586.032000] hda:<6>hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179586.052000] hda1 hda2 < hda5 >
[17179586.304000] usbcore: registered new driver usbfs
[17179586.304000] usbcore: registered new driver hub
[17179586.304000] USB Universal Host Controller Interface driver v3.0
[17179586.308000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179586.308000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179586.308000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
[17179586.308000] PCI: Setting latency timer of device 0000:00:10.0 to 64
[17179586.308000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179586.308000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179586.308000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e000
[17179586.308000] usb usb1: configuration #1 chosen from 1 choice
[17179586.308000] hub 1-0:1.0: USB hub found
[17179586.308000] hub 1-0:1.0: 2 ports detected
[17179586.412000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179586.412000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
[17179586.412000] PCI: Setting latency timer of device 0000:00:10.1 to 64
[17179586.412000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179586.412000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179586.412000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000dc00
[17179586.412000] usb usb2: configuration #1 chosen from 1 choice
[17179586.412000] hub 2-0:1.0: USB hub found
[17179586.412000] hub 2-0:1.0: 2 ports detected
[17179586.516000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179586.516000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1
[17179586.516000] PCI: Setting latency timer of device 0000:00:10.2 to 64
[17179586.516000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179586.516000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179586.516000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d800
[17179586.516000] usb usb3: configuration #1 chosen from 1 choice
[17179586.516000] hub 3-0:1.0: USB hub found
[17179586.516000] hub 3-0:1.0: 2 ports detected
[17179586.620000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179586.620000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1
[17179586.620000] PCI: Setting latency timer of device 0000:00:10.3 to 64
[17179586.620000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179586.620000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179586.620000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d400
[17179586.620000] usb usb4: configuration #1 chosen from 1 choice
[17179586.620000] hub 4-0:1.0: USB hub found
[17179586.620000] hub 4-0:1.0: 2 ports detected
[17179586.724000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179586.724000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[17179586.724000] PCI: Setting latency timer of device 0000:00:10.4 to 64
[17179586.724000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179586.724000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179586.724000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfdfff000
[17179586.724000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179586.724000] usb usb5: configuration #1 chosen from 1 choice
[17179586.724000] hub 5-0:1.0: USB hub found
[17179586.724000] hub 5-0:1.0: 8 ports detected
[17179586.900000] Attempting manual resume
[17179586.912000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179586.912000] EXT3-fs: write access will be enabled during recovery.
[17179589.448000] kjournald starting. Commit interval 5 seconds
[17179589.448000] EXT3-fs: recovery complete.
[17179589.452000] EXT3-fs: mounted filesystem with ordered data mode.
[17179599.160000] input: PC Speaker as /class/input/input1
[17179599.512000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179599.560000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179599.604000] Linux agpgart interface v0.101 (c) Dave Jones
[17179599.616000] agpgart: Detected VIA P4M800CE chipset
[17179599.624000] agpgart: AGP aperture is 128M @ 0xf0000000
[17179599.740000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179599.740000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[17179599.740000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 185
[17179599.740000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9
[17179599.740000] PCI: Setting latency timer of device 0000:00:12.0 to 64
[17179599.740000] eth0: VIA Rhine II at 0x1cc00, 00:16:17:45:45:b0, IRQ 185.
[17179599.744000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[17179600.184000] parport: PnPBIOS parport detected.
[17179600.184000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179600.184000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179600.212000] Floppy drive(s): fd0 is 1.44M
[17179600.232000] FDC 0 is a post-1991 82077
[17179600.268000] parport0: Printer, HEWLETT-PACKARD DESKJET 960C
[17179600.320000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179600.320000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193
[17179600.320000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
[17179600.320000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179600.820000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[17179600.856000] ts: Compaq touchscreen protocol output
[17179601.180000] fuse init (API version 7.6)
[17179601.220000] lp0: using parport0 (interrupt-driven).
[17179601.260000] Adding 1614492k swap on /dev/disk/by-uuid/dad4a53b-ed47-4c84-b4f3-59f91e48e572. Priority:-1 extents:1 across:1614492k
[17179601.276000] NET: Registered protocol family 17
[17179601.336000] EXT3 FS on hda1, internal journal
[17179607.036000] ACPI: Power Button (FF) [PWRF]
[17179607.036000] ACPI: Power Button (CM) [PWRB]
[17179607.036000] ACPI: Sleep Button (CM) [SLPB]
[17179607.160000] ibm_acpi: ec object not found
[17179607.204000] pcc_acpi: loading...
[17179609.744000] [drm] Initialized drm 1.0.1 20051102
[17179609.760000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179609.760000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179611.192000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179611.192000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179611.192000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179614.336000] Bluetooth: Core ver 2.8
[17179614.336000] NET: Registered protocol family 31
[17179614.336000] Bluetooth: HCI device and connection manager initialized
[17179614.336000] Bluetooth: HCI socket layer initialized
[17179614.372000] Bluetooth: L2CAP ver 2.8
[17179614.372000] Bluetooth: L2CAP socket layer initialized
[17179614.376000] Bluetooth: RFCOMM socket layer initialized
[17179614.376000] Bluetooth: RFCOMM TTY layer initialized
[17179614.376000] Bluetooth: RFCOMM ver 1.7
[17179619.544000] [drm] Setting GART location based on new memory map
[17179619.544000] [drm] Loading R300 Microcode
[17179619.544000] [drm] writeback test succeeded in 1 usecs
[17180898.764000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[17180898.912000] usb 5-1: configuration #1 chosen from 1 choice
[17180899.000000] usbcore: registered new driver libusual
[17180899.016000] Initializing USB Mass Storage driver...
[17180899.016000] scsi2 : SCSI emulation for USB Mass Storage devices
[17180899.016000] usb-storage: device found at 2
[17180899.016000] usb-storage: waiting for device to settle before scanning
[17180899.016000] usbcore: registered new driver usb-storage
[17180899.016000] USB Mass Storage support registered.
[17180904.016000] usb-storage: device scan complete
[17180904.016000] Vendor: FUJITSU Model: MHV2060AH Rev: 0000
[17180904.016000] Type: Direct-Access ANSI SCSI revision: 00
[17180904.052000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17180904.052000] sda: Write Protect is off
[17180904.052000] sda: Mode Sense: 00 14 00 00
[17180904.052000] sda: assuming drive cache: write through
[17180904.056000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[17180904.056000] sda: Write Protect is off
[17180904.056000] sda: Mode Sense: 00 14 00 00
[17180904.056000] sda: assuming drive cache: write through
[17180904.056000] sda: sda2 < sda5 >
[17180904.092000] sd 2:0:0:0: Attached scsi disk sda
[17180904.108000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17180908.184000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17181243.288000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17181243.288000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17181243.288000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17181243.564000] [drm] Setting GART location based on new memory map
[17181243.564000] [drm] Loading R300 Microcode
[17181243.564000] [drm] writeback test succeeded in 1 usecs
[17181277.576000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
paul@paul-linuxmint:~$
Can anyone assist with this problem?
Paul
