Im currently having an issue with gnomebaker ( and I've used other programs and get similar errors).
Currently gnomebaker will start to burn an audio cd and about maybe the 4th song it will fail and only write
those to the disc. I checked to see what the output error was.
- Code: Select all
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.8
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Vendor_info : 'MATSHITA'
Identification : 'DVD-RAM UJ-850S '
Revision : '1.90'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
Drive buf size : 1310720 = 1280 KB
FIFO size : 12582912 = 12288 KB
Speed set to 2822 KB/s
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 142622
Starting to write CD/DVD at speed 16.0 in real force TAO mode for single session.
Last chance to quit, starting real write in 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Starting new track at sector: 16443
Starting new track at sector: 30163
Starting new track at sector: 45376
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 D0 5D 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 04 00 00 CD F3 0A 00 32 00 13 03 01 00 00
Sense Key: 0x4 Hardware Error, deferred error, Segment 0
Sense Code: 0x03 Qual 0x01 (no write current) Fru 0x0
Sense flags: Blk 52723 (valid)
cmd finished after 0.030s timeout 40s
wodim: A write error occured.
wodim: Please properly read the error message above.
write track data: error after 18733680 bytes
Writing time: 101.663s
Average write speed 32.6x.
Min drive buffer fill was 95%
Fixating time: 34.154s
BURN-Free was never needed.
wodim: fifo had 2152 puts and 1961 gets.
wodim: fifo was 0 times empty and 1869 times full, min fill was 96%.
I'm wondering if anyone knows why its stoping after the 4th track. I read it and it makes no sense to me at
all but maybe im being slow... If you could get to this issue right away i'd really appericate it since my only
system is Linux and being able to burn audio cds is kinda a must when you have an annoying little sister
who wants music made 24/7...lol Thanx