Jabra BT2045 and KDE

[bugmenotprettyplz]

There is a headset, there is a Mint on KDE, so uname:
[сode]
mint @ desktop ~ $ uname-a

Linux desktop 3.0.0-12-generic # 20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU / Linux [/code]
There is also a Bluetooth adapter USBshny who sees mint periods, periods of not, at this point does not see when you connect and issue the following error:
[сode][41742.434493] r8169 0000:03:00.0: eth0: link up

[43987.381498] usb 5-2.2: new full speed USB device number 27 using uhci_hcd

[43987.792017] usb 5-2.2: device not accepting address 27, error -71

[43987.865521] usb 5-2.2: new full speed USB device number 28 using uhci_hcd

[43988.276032] usb 5-2.2: device not accepting address 28,error -71

[43988.349529] usb 5-2.2: new full speed USB device number 29 using uhci_hcd

[43988.433530] usb 5-2.2: device descriptor read/64, error -71

[43988.621537] usb 5-2.2: device descriptor read/64, error -71

[43988.797543] usb 5-2.2: new full speed USB device number 30 using uhci_hcd

[43988.881551] usb 5-2.2: device descriptor read/64, error -71

[43989.069551] usb 5-2.2: device descriptor read/64, error -71

[43989.173563] hub 5-2:1.0: unable to enumerate USB device on port 2

[44110.009511] usb 5-2.4: new full speed USB device number 31 using uhci_hcd

[44110.420017] usb 5-2.4: device not accepting address 31, error -71

[44 110.493521] usb 5-2.4: new full speed USB device number 32 using uhci_hcd

[44110.904020] usb 5-2.4: device not accepting address 32, error -71

[44110.977540] usb 5-2.4: new full speed USB device number 33 using uhci_hcd

[44111.061545] usb 5-2.4: device descriptor read/64, error -71

[44111.249546] usb 5-2.4: device descriptor read/64, error-71

[44111.425551] usb 5-2.4: new full speed USB device number 34 using uhci_hcd

[44111.509553] usb 5-2.4: device descriptor read/64, error -71

[44111.697560] usb 5-2.4: device descriptor read/64, error -71

[44111.801566] hub 5-2:1.0: unable to enumerate USB device on port 4 [/code]
I've conjured with disabling ehci_hcd,but now the error comes from uhci_hcd.
 In windsurfing this BT adapter works quietly and is connected, then here in the presence of soft-error.
 Again, when the adapter is not connected, it is impossible to bring the sound to the headset because the headset Phonon marked in gray in the device listAlthough paired and connected to the headset as well, and all packets for pulse / bluez installed.

[bugmenotprettyplz]

Ok the problem fixed, there was broken bluetooth adapter, I bought new one and now my headset connects to the computer.
But the problem appeared with transiting sound to the headset. I've setup in Phonon to transit sound to the headset but it doesn't work, just one beep and that's all. What am I doing wrong?

[bu99zy]

Try installing PulseAudio Volume Control

This will give you extra settings, to see if your headset is being picked up or could just be muted.

Code: Select all

sudo apt-get install pavucontrol

[bugmenotprettyplz]

It's installed but what options should I set?