The headset works fine with the wireless module plugged in, however the issue occurs when plugging the headset in directly to the USB. The wireless box will ultimately be plugged into another machine but I wanted to just plug it in directly when on another machine. This setup does work on other OSes.
dmesg output for headset connected directly:
- Code: Select all
[225946.228879] usb 2-1.5: new full-speed USB device number 26 using ehci_hcd
[225946.326671] usb 2-1.5: config 1 has an invalid interface number: 1 but max is 0
[225946.326675] usb 2-1.5: config 1 has no interface number 0
[225946.369079] input: Turtle Beach Turtle Beach PX3 Battery Charger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input21
[225946.369507] generic-usb 0003:10F5:0244.0008: input,hiddev0,hidraw0: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 Battery Charger] on usb-0000:00:1d.0-1.5/input1
lsusb output for headset connected directly:
- Code: Select all
Bus 002 Device 030: ID 10f5:0244 Turtle Beach
dmesg output for wireless box connected
- Code: Select all
[239304.555292] usb 2-1.6: new full-speed USB device number 28 using ehci_hcd
[239305.030856] input: Turtle Beach Turtle Beach PX3 (PC) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.3/input/input23
[239305.031133] generic-usb 0003:10F5:0242.000A: input,hiddev0,hidraw0: USB HID v1.11 Device [Turtle Beach Turtle Beach PX3 (PC)] on usb-0000:00:1d.0-1.6/input3
lsusb output for wireless box connected
- Code: Select all
Bus 002 Device 031: ID 10f5:0242 Turtle Beach
I am using a full usb cable when connecting the headset directly and not the supplied charge-only cable. Running Mint 13 64-bit (Mate version) on a Sony VAIO VPCEB1Z0E/B.
If anyone has already managed to get this to work, knows roughly what to do or who to contact to get this working please do let me know.
Many thanks for taking the time to read this and any help given is greatly appreciated,
Alasdair.
