Where are config files for USB and/or scanner stored?

[Husse]

I still haven't solved the problem in this thread:
http://www.linuxmint.com/forum/viewtopic.php?t=1946
I find the scanner (brother2) in some files scattered over the system, where should I look for more?
I have found and adjusted /home/mats/.so_sane_state to say bus1 device2 but xsane still says bus2 device1 so there should be at least one more file with bus2 device1
Looking for it....

[Boo]

have you seen this?
http://www.die.net/doc/linux/man/man5/sane-usb.5.html

the usb kernel driver bit is interesting.

[Husse]

I've seen it - I have a file /proc/bus/usb/002/001
I can't remove it (and of course I used sudo) not allowed to do that
But you're right this may be my problem file....

[Boo]

I installed the driver too but i dont have your scanner to test. lol

I have noticed that the file /proc/bus/usb/devices does not have an entry for your scanner but i havent connected it.
so do you have an entry in there for the scanner??

[Husse]

proc/bus/usb/devices

It's an empty file! zero bytes

[Boo]

are you using any other usb devices?
my usb devices file looks like this.

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.17-10-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.17-10-generic ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 77/900 us ( 9%), #Int= 5, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.17-10-generic ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c223 Rev= 1.01
S: Manufacturer=Logitech
S: Product=Logitech G15 Keyboard
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms

T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c221 Rev= 1.70
S: Manufacturer=Logitech
S: Product=Logitech Gaming Keyboard
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms

T: Bus=01 Lev=02 Prnt=03 Port=02 Cnt=02 Dev#= 5 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c01e Rev=22.00
S: Manufacturer=Logitech
S: Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms

T: Bus=01 Lev=02 Prnt=03 Port=03 Cnt=03 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c222 Rev= 1.01
S: Manufacturer=G15 Keyboard
S: Product=G15 Keyboard
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=1ms
E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=1ms

I would have thought you should at least see the host controllers at the top.
plug something usb in to wake it up at least.

[scorp123]

I can't remove it (and of course I used sudo) not allowed to do that

proc/bus/usb/devices

It's an empty file! zero bytes

You're not supposed to touch /proc or /sys !!!!!! These are purely virtual filesystems only present for info purposes that belong to the kernel itself. Wikipedia: http://en.wikipedia.org/wiki/Procfs

Knowledge is power And sometimes a little reading is all that is needed

[Husse]

@scorp
Just trying to fix my scanner problem the rough way
This box is nuts
lsusb > scanner on bus1dev2
sane > scanner on bus2dev1
so getting rid of /proc/bus/usb/002/001 seems an option even if you break your system. I always have daily backups of the entire / partition so to get back is simple.
@boo
usb devices empty even after my Sony ericsson phone connected and automatically transferred some photos.
But - with the phone connected "brother2" is now bus2dev2 while lsusb still finds it on bus1 (now dev3 and the phone dev4)
There must be some gnomes in there