Mint does not see

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read this

Mint does not see

Postby fintro on Thu Mar 19, 2009 7:08 am

Hi,

On my system:
Intel Q 6600
Asus P5E3
2M DDR3 Corsair 1333
Nvidia 9600 Gt
2 WD disks in Hard Raid 0 controlled by a pci Promise Fast track Tx 2300 with Windows XP
1 disk Seagate 250 with Mint6 Felicia + data partition NTFS.

Just made a migration from Mandriva, and I find Felicia more elegant and more stable.
Only one problem: Felicia does not see files in my Raid array.
With Mandriva I could read and write in the array with Windows.
Actually "lspci" command reports:
------
Raid bus controller Promise Technology inc. 20771 (FastTrack TX 2300) rev02
---
How can I make Felicia see my Raid?
(the Promise site offers some old "drivers for Linux" not suitable for Ubuntu, if Googling you go to these drivers all the time)

Thank you
fintro
Level 1
Level 1
 
Posts: 1
Joined: Wed Mar 18, 2009 12:35 pm

Linux Mint is funded by ads and donations.
 

Re: Mint does not see

Postby merlwiz79 on Mon Mar 23, 2009 7:06 pm

I haven't used a raid array so I don't have all the info.
What type of raid array are you using?
I believe you need to install dmraid(Hardware Raid) or mdadm(Software Raid).

Locate the raid(look for something like /dev/md0 or /dev/mapper/)
Code: Select all
sudo fdisk -l

Refresh for dmraid.
Code: Select all
sudo dmraid -ay

Then to mount you can try.
Code: Select all
sudo mkdir /media/raid

Change /dev/md0 to whatever yours is:(replace FILESYSTEM with the correct filesystem of the raid ie ext3)
Code: Select all
sudo mount -t FILESYSTEM /dev/md0 /media/raid


Edit this may help: https://help.ubuntu.com/community/FakeRaidHowto
User avatar
merlwiz79
Level 11
Level 11
 
Posts: 3637
Joined: Wed Apr 04, 2007 1:50 pm
Location: Here again :)


Return to Hardware Support

Who is online

Users browsing this forum: Bing [Bot] and 15 guests