No mixer elems found

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read this

No mixer elems found

Postby Lozanoa11 on Thu May 14, 2009 4:49 pm

well i recently installed felicia and i have no sound.
I did the aplay -l command and i got
Code: Select all
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 Analog [ALC662 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 Digital [ALC662 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Then i ran alsamixer and got
Code: Select all
No mixer elems found

any ideas?
Lozanoa11
Level 1
Level 1
 
Posts: 9
Joined: Thu May 14, 2009 4:45 pm

Linux Mint is funded by ads and donations.
 

Re: No mixer elems found

Postby Lozanoa11 on Thu May 14, 2009 6:19 pm

ok so i got to the mixer now and the volume is up all the way and i still have no sound i have gone though many tutorials and still cant figure it out.
here is my aplay -l
Code: Select all
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 Analog [ALC662 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 Digital [ALC662 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


also
Code: Select all
$ pkill pulseaudio; sleep 2; pulseaudio -vv


Code: Select all
$ pkill pulseaudi; sleep 2; pulseaudio -vv
I: main.c: PolicyKit refuses acquire-high-priority privilige.
I: main.c: Called SUID root and real-time/high-priority scheduling was requested in the configuration. However, we lack the necessary priviliges:
I: main.c: We are not in group 'pulse-rt' and PolicyKit refuse to grant us priviliges. Dropping SUID again.
I: main.c: For enabling real-time scheduling please acquire the appropriate PolicyKit priviliges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
I: main.c: Note that real-time/high-priority scheduling is NOT normally required. If you experience crackling or other sound anomalies, consider one or more of the above solutions.
I: main.c: High-priority scheduling enabled in configuration but now allowed by policy. Disabling forcibly.
W: ltdl-bind-now.c: Failed to find original dlopen loader.
W: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
W: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
I: main.c: This is PulseAudio 0.9.10
I: main.c: Page size is 4096 bytes
I: main.c: Fresh high-resolution timers available! Bon appetit!
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-hal-detect.so': success
I: module-hal-detect.c: Trying capability alsa
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_timer
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_sequencer
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/pci_8086_3a3e_sound_card_0_alsa_playback_1
D: module-hal-detect.c: Loading module-alsa-sink with arguments 'device_id=0 sink_name=alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0'
D: alsa-util.c: Trying front:0...
I: alsa-util.c: PCM device front:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround40:0...
I: alsa-util.c: PCM device surround40:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround41:0...
I: alsa-util.c: PCM device surround41:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround50:0...
I: alsa-util.c: PCM device surround50:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround51:0...
I: alsa-util.c: PCM device surround51:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround71:0...
I: alsa-util.c: PCM device surround71:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying hw:0 as last resort...
I: module-alsa-sink.c: Successfully opened device hw:0.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
W: alsa-util.c: Unable to determine current swparams: Operation not permitted
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Master".
I: sink.c: Created sink 0 "alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0" with sample spec "s16le 2ch 44100Hz"
I: source.c: Created source 0 "alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0.monitor" with sample spec "s16le 2ch 44100Hz"
I: module-alsa-sink.c: Using 8 fragments of size 1760 bytes.
I: alsa-util.c: ALSA device lacks independant volume controls for each channel, falling back to software volume control.
D: module-alsa-sink.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+29
W: module-alsa-sink.c: Got POLLERR from ALSA
W: module-alsa-sink.c: Could not recover from POLLERR|POLLNVAL|POLLHUP with snd_pcm_prepare(): Input/output error
I: module.c: Loaded "module-alsa-sink" (index: #0; argument: "device_id=0 sink_name=alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0").
D: module-hal-detect.c: Loading module-alsa-source with arguments 'device_id=0 source_name=alsa_input.pci_8086_3a3e_sound_card_0_alsa_capture_0'
D: alsa-util.c: Trying front:0...
I: alsa-util.c: PCM device front:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround40:0...
I: alsa-util.c: PCM device surround40:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround41:0...
I: alsa-util.c: PCM device surround41:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround50:0...
I: alsa-util.c: PCM device surround50:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround51:0...
I: alsa-util.c: PCM device surround51:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying surround71:0...
I: alsa-util.c: PCM device surround71:0 refused our hw parameters: Invalid argument
D: alsa-util.c: Trying hw:0 as last resort...
I: module-alsa-source.c: Successfully opened device hw:0.
I: module-alsa-source.c: Successfully enabled mmap() mode.
W: alsa-util.c: Unable to determine current swparams: Operation not permitted
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Capture".
I: source.c: Created source 1 "alsa_input.pci_8086_3a3e_sound_card_0_alsa_capture_0" with sample spec "s16le 2ch 44100Hz"
I: module-alsa-source.c: Using 8 fragments of size 1760 bytes.
I: alsa-util.c: All 2 channels can be mapped to mixer channels. Using hardware volume control.
D: module-alsa-source.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+28
W: module-alsa-source.c: Got POLLERR from ALSA
W: module-alsa-source.c: Could not recover from POLLERR|POLLNVAL|POLLHUP with snd_pcm_prepare(): Input/output error
I: module.c: Loaded "module-alsa-source" (index: #1; argument: "device_id=0 source_name=alsa_input.pci_8086_3a3e_sound_card_0_alsa_capture_0").
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/pci_8086_3a3e_sound_card_0_alsa_control__1
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/pci_1002_aa38_sound_card_0_alsa_playback_3
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/pci_1002_aa38_sound_card_0_alsa_control__1
I: module-hal-detect.c: Loaded 2 modules.
I: module.c: Loaded "module-hal-detect" (index: #2; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-esound-protocol-unix.so': success
I: module.c: Loaded "module-esound-protocol-unix" (index: #3; argument: "").
I: protocol-native.c: loading cookie from disk.
I: module.c: Loaded "module-native-protocol-unix" (index: #4; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-gconf.so': success
D: module-gconf.c: Loading module 'module-rtp-send' with args 'source=@DEFAULT_MONITOR@ loop=0' due to GConf configuration.
I: resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
I: resampler.c: Using resampler 'copy'
I: resampler.c: Using s16le as working format.
I: source-output.c: Created output 0 "RTP Monitor Stream" on alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0.monitor with sample spec s16be 2ch 44100Hz and channel map front-left,front-right
D: memblockq.c: memblockq requested: maxlength=174080, tlength=174080, base=4, prebuf=1, minreq=0
D: memblockq.c: memblockq sanitized: maxlength=174080, tlength=174080, base=4, prebuf=4, minreq=4
I: module-rtp-send.c: RTP stream initialized with mtu 1280 on 224.0.0.56:46010, SSRC=0xdf638c05, payload=10, initial sequence #52592
I: module-rtp-send.c: SDP-Data:
I: module-rtp-send.c: v=0
I: module-rtp-send.c: o=alex 3451328010 0 IN IP4 192.168.0.196
I: module-rtp-send.c: s=PulseAudio RTP Stream on alex-desktop
I: module-rtp-send.c: c=IN IP4 224.0.0.56
I: module-rtp-send.c: t=3451328010 0
I: module-rtp-send.c: a=recvonly
I: module-rtp-send.c: m=audio 46010 RTP/AVP 10
I: module-rtp-send.c: a=rtpmap:10 L16/44100/2
I: module-rtp-send.c: a=type:broadcast
I: module-rtp-send.c: EOF
I: module.c: Loaded "module-rtp-send" (index: #5; argument: "source=@DEFAULT_MONITOR@ loop=0").
D: module-gconf.c: Loading module 'module-combine' with args '' due to GConf configuration.
I: sink.c: Created sink 1 "combined" with sample spec "s16le 2ch 44100Hz"
I: source.c: Created source 2 "combined.monitor" with sample spec "s16le 2ch 44100Hz"
D: memblockq.c: memblockq requested: maxlength=174080, tlength=174080, base=4, prebuf=1, minreq=0
D: memblockq.c: memblockq sanitized: maxlength=174080, tlength=174080, base=4, prebuf=4, minreq=4
I: resampler.c: Using resampler 'trivial'
I: resampler.c: Using s16le as working format.
I: sink-input.c: Created input 0 "Simultaneous output on ALSA PCM on hw:0 (ALC662 Analog) via DMA" on alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0 with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: module-combine.c: Master sink is now 'alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0'
D: module-combine.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+27
I: module.c: Loaded "module-combine" (index: #6; argument: "").
D: module-gconf.c: Loading module 'module-rtp-recv' with args '' due to GConf configuration.
I: module.c: Loaded "module-rtp-recv" (index: #7; argument: "").
D: module-gconf.c: Loading module 'module-native-protocol-tcp' with args '' due to GConf configuration.
E: socket-server.c: socket(PF_INET6): Address family not supported by protocol
I: protocol-native.c: using already loaded auth cookie.
I: module.c: Loaded "module-native-protocol-tcp" (index: #8; argument: "").
D: module-gconf.c: Loading module 'module-esound-protocol-tcp' with args '' due to GConf configuration.
E: socket-server.c: socket(PF_INET6): Address family not supported by protocol
I: module.c: Loaded "module-esound-protocol-tcp" (index: #9; argument: "").
I: module.c: Loaded "module-gconf" (index: #10; argument: "").
I: module.c: Loaded "module-volume-restore" (index: #11; argument: "").
I: module-default-device-restore.c: Manually configured default sink, not overwriting.
D: module-default-device-restore.c: Restored default source 'combined.monitor'.
I: module.c: Loaded "module-default-device-restore" (index: #12; argument: "").
I: module.c: Loaded "module-rescue-streams" (index: #13; argument: "").
D: module-suspend-on-idle.c: Sink combined becomes idle.
D: module-suspend-on-idle.c: Source alsa_input.pci_8086_3a3e_sound_card_0_alsa_capture_0 becomes idle.
D: module-suspend-on-idle.c: Source combined.monitor becomes idle.
I: module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-x11-publish.so': success
D: module-x11-publish.c: using already loaded auth cookie.
I: module.c: Loaded "module-x11-publish" (index: #15; argument: "").
I: main.c: Daemon startup complete.
D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
I: module.c: Unloading "module-alsa-source" (index: #1).
D: module-rescue-streams.c: No source outputs to move away.
D: module-alsa-source.c: Thread shutting down
I: source.c: Freeing source 1 "alsa_input.pci_8086_3a3e_sound_card_0_alsa_capture_0"
I: module.c: Unloaded "module-alsa-source" (index: #1).
I: module.c: Unloading "module-alsa-sink" (index: #0).
I: module-combine.c: Unconfiguring sink: alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0
I: module-combine.c: No master selected, lacking suitable outputs.
D: module-suspend-on-idle.c: Sink alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0 becomes idle.
D: module-suspend-on-idle.c: Sink alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0 becomes idle.
I: sink-input.c: Freeing output 0 "Simultaneous output on ALSA PCM on hw:0 (ALC662 Analog) via DMA"
D: module-rescue-streams.c: No sink inputs to move away.
D: module-suspend-on-idle.c: Source combined.monitor becomes busy.
D: module-suspend-on-idle.c: Source alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0.monitor becomes idle.
D: module-suspend-on-idle.c: Source alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0.monitor becomes idle.
D: source-output.c: Successfully moved source output 0 from alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0.monitor to combined.monitor.
I: module-rescue-streams.c: Sucessfully moved source output 0 "RTP Monitor Stream" to combined.monitor.
D: module-alsa-sink.c: Thread shutting down
I: sink.c: Freeing sink 0 "alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0"
I: source.c: Freeing source 0 "alsa_output.pci_8086_3a3e_sound_card_0_alsa_playback_0.monitor"
I: module.c: Unloaded "module-alsa-sink" (index: #0).
I: module-suspend-on-idle.c: Sink combined idle for too long, suspending ...
I: module-combine.c: Device suspended...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
D: module-rtp-recv.c: Checking for dead streams ...
seems to be stuck like this and has not finished yet
Lozanoa11
Level 1
Level 1
 
Posts: 9
Joined: Thu May 14, 2009 4:45 pm

Re: No mixer elems found

Postby Lozanoa11 on Thu May 14, 2009 6:31 pm

ok so once again i got to the alsamixer and its down to zero. so i turn it up press escape and go back to it and its back down to zero. What am i doing wrong?
i save it with
Code: Select all
sudo alsactl store 0
but it still is back to 0 every time i open it
Lozanoa11
Level 1
Level 1
 
Posts: 9
Joined: Thu May 14, 2009 4:45 pm

Re: No mixer elems found

Postby Lozanoa11 on Thu May 14, 2009 9:20 pm

any one got any idea's
Lozanoa11
Level 1
Level 1
 
Posts: 9
Joined: Thu May 14, 2009 4:45 pm

Re: No mixer elems found

Postby Lozanoa11 on Sat May 16, 2009 9:42 am

still haveing problems
Lozanoa11
Level 1
Level 1
 
Posts: 9
Joined: Thu May 14, 2009 4:45 pm


Return to Hardware Support

Who is online

Users browsing this forum: mfreeman and 10 guests