CD Rom wont mount

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read this

CD Rom wont mount

Postby thebrandon on Fri May 22, 2009 2:18 pm

For some reason my cd rom drive wont mount when I put a cd in. I have checked all my cables and everything and it functions properly. What can I do to see if its a problem with mint?
thebrandon
Level 1
Level 1
 
Posts: 8
Joined: Fri May 22, 2009 2:09 pm

Linux Mint is funded by ads and donations.
 

Re: CD Rom wont mount

Postby Husse on Tue May 26, 2009 6:52 am

Is the drive present in "Computer"
If yes it's recognized - if no you may have a hardware problem
If it's recognized try all sorts of different discs and see if one sort is recognized
It's not all too uncommon that certain discs don't work
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19714
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: CD Rom wont mount

Postby thebrandon on Tue May 26, 2009 11:42 pm

The drive is seen under COMPUTER and when I put a cdr in and click on it it gives the the error "Can't Mount File"
thebrandon
Level 1
Level 1
 
Posts: 8
Joined: Fri May 22, 2009 2:09 pm

Re: CD Rom wont mount

Postby VisiGoth on Thu May 28, 2009 2:52 pm

I believe this is not a hardware issue.
I am having a similar though not exactly the same problem on a Gateway 600YG2 with Mint 7 Gloria installed in Windows XP through Mint4win.
I attempted to install Windows Wireless drivers but the CDROM was not mounted and therefore the .inf file is unable to be located.
There are also no 'Computer' or 'Home' icons on the desktop.
When I attempt to launch these items from the Menu, nothing happens either.

NB - These issues do not exist in Mint 6 Felicia, therefore I am asserting that this is a software issue In Mint 7 and not a hardware one.
VisiGoth
Level 1
Level 1
 
Posts: 6
Joined: Tue Jan 20, 2009 1:53 pm

Re: CD Rom wont mount

Postby VisiGoth on Thu May 28, 2009 4:09 pm

Okay, curiouser and curiouser, the 'Computer' and 'Home' icons sometimes appear on the desktop.

They will only appear if you boot the operating system with no CD inserted in the CDROM drive.
AS soon as you insert a CD they disappear.
The 'Computer' and 'Home' icons in the Menu will launch ok if there is no CD in the drive.
The 'Computer' and 'Home icons in the menu will not launch at all if there is a CD in the drive.
The CDRW icon appears in the 'Computer' window however I can only access this when there is no media present, and of course I get the message: "Unable to open location - No media in the drive."
The 'Computer' and 'Home' windows will both disappear if you insert a CD in the drive while they are open/expanded.
VisiGoth
Level 1
Level 1
 
Posts: 6
Joined: Tue Jan 20, 2009 1:53 pm

Re: CD Rom wont mount

Postby Husse on Mon Jun 01, 2009 1:39 pm

OK guys - show us your /etc/fstab files
You should have a line in it for your drive like this
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
Possibly scd1...
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19714
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: CD Rom wont mount

Postby thebrandon on Tue Jun 02, 2009 12:15 am

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1
UUID=3b02060b-1ee3-4800-ac69-36bbb1d1b699 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda5
UUID=8cdbcb2a-dbab-4961-ab6b-89fbfae0b854 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
thebrandon
Level 1
Level 1
 
Posts: 8
Joined: Fri May 22, 2009 2:09 pm

Re: CD Rom wont mount

Postby clem on Tue Jun 02, 2009 5:03 am

Show the output of dmesg when you insert a CD. Also show the output of mount after the CD has been in for a minute or two.

Clem.
Husse, that's nothing to do with mintSystem.
Image
User avatar
clem
Level 15
Level 15
 
Posts: 5514
Joined: Wed Nov 15, 2006 8:34 am

Re: CD Rom wont mount

Postby Husse on Tue Jun 02, 2009 5:32 am

Husse, that's nothing to do with mintSystem

Just a long shot :)
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19714
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: CD Rom wont mount

Postby thebrandon on Tue Jun 02, 2009 2:05 pm

dmesg seems to take up more lines than my terminal will remember!

[ 0.000000] ACPI: DSDT 1FFB03F0, 3A3E (r1 A0036 A0036001 1 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFC0000, 0040
[ 0.000000] ACPI: APIC 1FFB0390, 0052 (r1 A M I OEMAPIC 8000716 MSFT 97)
[ 0.000000] ACPI: OEMB 1FFC0040, 003F (r1 A M I OEMBIOS 8000716 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129969
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2202.891 MHz processor.
[ 36.725552] Console: colour VGA+ 80x25
[ 36.725557] console [tty0] enabled
[ 36.726017] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 36.726269] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 36.736908] Memory: 506620k/523968k available (2179k kernel code, 16820k reserved, 1008k data, 368k init, 0k highmem)
[ 36.736916] virtual kernel memory layout:
[ 36.736917] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 36.736918] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 36.736919] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 36.736920] lowmem : 0xc0000000 - 0xdffb0000 ( 511 MB)
[ 36.736921] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 36.736922] .data : 0xc0320d78 - 0xc041cdc4 (1008 kB)
[ 36.736923] .text : 0xc0100000 - 0xc0320d78 (2179 kB)
[ 36.736926] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 36.736961] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 36.816846] Calibrating delay using timer specific routine.. 4411.04 BogoMIPS (lpj=8822096)
[ 36.816872] Security Framework initialized
[ 36.816881] SELinux: Disabled at boot.
[ 36.816896] AppArmor: AppArmor initialized
[ 36.816901] Failure registering capabilities with primary security module.
[ 36.816909] Mount-cache hash table entries: 512
[ 36.817018] Initializing cgroup subsys ns
[ 36.817022] Initializing cgroup subsys cpuacct
[ 36.817032] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 36.817040] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 36.817042] CPU: L2 Cache: 512K (64 bytes/line)
[ 36.817045] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00020410 00000000 00000000 00000000 00000000
[ 36.817053] Compat vDSO mapped to ffffe000.
[ 36.817064] Checking 'hlt' instruction... OK.
[ 36.833109] SMP alternatives: switching to UP code
[ 36.834232] Freeing SMP alternatives: 11k freed
[ 36.834355] Early unpacking initramfs... done
[ 37.135606] ACPI: Core revision 20070126
[ 37.135666] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 37.137251] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 00
[ 37.137264] Total of 1 processors activated (4411.04 BogoMIPS).
[ 37.137764] ENABLING IO-APIC IRQs
[ 37.138083] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 37.284063] Brought up 1 CPUs
[ 37.284117] CPU0 attaching sched-domain:
[ 37.284120] domain 0: span 01
[ 37.284122] groups: 01
[ 37.284280] net_namespace: 64 bytes
[ 37.284288] Booting paravirtualized kernel on bare hardware
[ 37.284690] Time: 3:58:43 Date: 05/30/09
[ 37.284716] NET: Registered protocol family 16
[ 37.284872] EISA bus registered
[ 37.284905] ACPI: bus type pci registered
[ 37.285835] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 37.285837] PCI: Using configuration type 1
[ 37.285846] Setting up standard PCI resources
[ 37.293926] ACPI: EC: Look up EC in DSDT
[ 37.296835] ACPI: Interpreter enabled
[ 37.296837] ACPI: (supports S0 S1 S3 S4 S5)
[ 37.296849] ACPI: Using IOAPIC for interrupt routing
[ 37.302247] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 37.303055] PCI: enabled onboard AC97/MC97 devices
[ 37.303288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 37.310935] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 37.311023] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 37.311107] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 37.311192] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 37.311277] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 37.311361] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 37.311446] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 37.311531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 37.311621] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 0D, should be FE [20070126]
[ 37.311626] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 37.311651] pnp: PnP ACPI init
[ 37.311657] ACPI: bus type pnp registered
[ 37.314988] pnp: PnP ACPI: found 15 devices
[ 37.314990] ACPI: ACPI bus type pnp unregistered
[ 37.314993] PnPBIOS: Disabled by ACPI PNP
[ 37.315178] PCI: Using ACPI for IRQ routing
[ 37.315181] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 37.335936] NET: Registered protocol family 8
[ 37.335938] NET: Registered protocol family 20
[ 37.336016] AppArmor: AppArmor Filesystem Enabled
[ 37.339923] Time: tsc clocksource has been installed.
[ 37.347937] system 00:09: ioport range 0x680-0x6ff has been reserved
[ 37.347940] system 00:09: ioport range 0x290-0x297 has been reserved
[ 37.347944] system 00:0a: ioport range 0x3e1-0x3e7 has been reserved
[ 37.347947] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 37.347949] system 00:0a: ioport range 0x800-0x87f has been reserved
[ 37.347951] system 00:0a: ioport range 0x400-0x41f has been reserved
[ 37.347956] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 37.347959] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 37.347961] system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
[ 37.347967] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 37.347969] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
[ 37.347971] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 37.347974] system 00:0e: iomem range 0x100000-0x1ffeffff could not be reserved
[ 37.347976] system 00:0e: iomem range 0x0-0x0 could not be reserved
[ 37.378249] PCI: Bridge: 0000:00:01.0
[ 37.378251] IO window: disabled.
[ 37.378254] MEM window: faf00000-fbffffff
[ 37.378257] PREFETCH window: f0000000-f9ffffff
[ 37.378274] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 37.378286] NET: Registered protocol family 2
[ 37.415874] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 37.416071] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 37.416264] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 37.416450] TCP: Hash tables configured (established 16384 bind 16384)
[ 37.416453] TCP reno registered
[ 37.427889] checking if image is initramfs... it is
[ 37.878960] Switched to high resolution mode on CPU 0
[ 38.010362] Freeing initrd memory: 8172k freed
[ 38.010985] audit: initializing netlink socket (disabled)
[ 38.011001] audit(1243655923.172:1): initialized
[ 38.012614] VFS: Disk quotas dquot_6.5.1
[ 38.012679] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 38.012807] io scheduler noop registered
[ 38.012809] io scheduler anticipatory registered
[ 38.012811] io scheduler deadline registered
[ 38.012820] io scheduler cfq registered (default)
[ 38.012834] PCI: VIA PCI bridge detected. Disabling DAC.
[ 45.995689] 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 45.995817] Boot video device is 0000:01:00.0
[ 45.996046] isapnp: Scanning for PnP cards...
[ 46.349333] isapnp: No Plug & Play device found
[ 46.373021] Real Time Clock Driver v1.12ac
[ 46.373123] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 46.373234] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 46.373343] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 46.373862] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 46.374088] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 46.374730] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 46.374788] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 46.374864] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 46.375563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 46.375568] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 46.386998] mice: PS/2 mouse device common for all mice
[ 46.387094] EISA: Probing bus 0 at eisa.0
[ 46.387102] Cannot allocate resource for EISA slot 1
[ 46.387129] EISA: Detected 0 cards.
[ 46.387132] cpuidle: using governor ladder
[ 46.387133] cpuidle: using governor menu
[ 46.387229] NET: Registered protocol family 1
[ 46.387254] Using IPI No-Shortcut mode
[ 46.387290] registered taskstats version 1
[ 46.387427] Magic number: 9:7:969
[ 46.387644] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 46.387646] EDD information not available.
[ 46.388076] Freeing unused kernel memory: 368k freed
[ 46.388098] Write protecting the kernel read-only data: 806k
[ 46.418919] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 47.575804] fuse init (API version 7.9)
[ 47.592783] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 48.092058] SCSI subsystem initialized
[ 48.127818] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 48.127856] skge 1.13 addr 0xfaa00000 irq 16 chip Yukon-Lite rev 7
[ 48.129296] skge eth0: addr 00:11:2f:de:4a:98
[ 48.135706] libata version 3.00 loaded.
[ 48.139816] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 48.192535] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[fa600000-fa6007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 48.219604] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 48.255956] usbcore: registered new interface driver usbfs
[ 48.255982] usbcore: registered new interface driver hub
[ 48.271465] usbcore: registered new device driver usb
[ 48.277162] USB Universal Host Controller Interface driver v3.0
[ 48.303483] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 48.303491] 8139cp 0000:00:0b.0: Try the "8139too" driver instead.
[ 48.305306] sata_promise 0000:00:08.0: version 2.11
[ 48.305334] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 48.312188] 8139too Fast Ethernet driver 0.9.28
[ 48.323363] scsi0 : sata_promise
[ 48.331484] scsi1 : sata_promise
[ 48.342118] scsi2 : sata_promise
[ 48.342182] ata1: SATA max UDMA/133 mmio m4096@0xfa800000 port 0xfa800200 irq 18
[ 48.342186] ata2: SATA max UDMA/133 mmio m4096@0xfa800000 port 0xfa800280 irq 18
[ 48.342189] ata3: PATA max UDMA/133 mmio m4096@0xfa800000 port 0xfa800300 irq 18
[ 48.395335] Floppy drive(s): fd0 is 1.44M
[ 48.415098] FDC 0 is a post-1991 82077
[ 48.650740] ata1: SATA link down (SStatus 0 SControl 300)
[ 48.962138] ata2: SATA link down (SStatus 0 SControl 0)
[ 49.118414] sata_via 0000:00:0f.0: version 2.3
[ 49.118441] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 19
[ 49.118494] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 49.119696] scsi3 : sata_via
[ 49.119980] scsi4 : sata_via
[ 49.120004] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 19
[ 49.120006] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 19
[ 49.321457] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 49.533057] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 49.543828] pata_via 0000:00:0f.1: version 0.3.3
[ 49.543864] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 19
[ 49.544933] scsi5 : pata_via
[ 49.545210] scsi6 : pata_via
[ 49.546376] ata6: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 49.546378] ata7: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 49.573086] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000b392b2]
[ 49.729773] ata6.00: ATA-7: WDC WD1600JB-00REA0, 20.00K20, max UDMA/100
[ 49.729776] ata6.00: 312581808 sectors, multi 16: LBA48
[ 49.730831] ata6.01: ATA-5: WDC WD1200JB-00CRA1, 17.07W17, max UDMA/100
[ 49.730833] ata6.01: 234441648 sectors, multi 16: LBA
[ 49.737035] ata6.00: configured for UDMA/100
[ 49.753916] ata6.01: configured for UDMA/100
[ 50.072417] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 50.072421] ata7: failed to recover some devices, retrying in 5 secs
[ 55.386474] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 55.386477] ata7: failed to recover some devices, retrying in 5 secs
[ 60.700484] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x100)
[ 60.700488] ata7: failed to recover some devices, retrying in 5 secs
[ 65.850638] scsi 5:0:0:0: Direct-Access ATA WDC WD1600JB-00R 20.0 PQ: 0 ANSI: 5
[ 65.851002] scsi 5:0:1:0: Direct-Access ATA WDC WD1200JB-00C 17.0 PQ: 0 ANSI: 5
[ 65.852691] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 65.852705] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 65.853010] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 65.853044] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d400
[ 65.853173] usb usb1: configuration #1 chosen from 1 choice
[ 65.853202] hub 1-0:1.0: USB hub found
[ 65.853207] hub 1-0:1.0: 2 ports detected
[ 65.954394] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20
[ 65.954410] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 65.954431] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 65.954455] uhci_hcd 0000:00:10.1: irq 20, io base 0x0000d800
[ 65.954563] usb usb2: configuration #1 chosen from 1 choice
[ 65.954583] hub 2-0:1.0: USB hub found
[ 65.954588] hub 2-0:1.0: 2 ports detected
[ 66.058150] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20
[ 66.058162] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 66.058189] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 66.058210] uhci_hcd 0000:00:10.2: irq 20, io base 0x0000e000
[ 66.058300] usb usb3: configuration #1 chosen from 1 choice
[ 66.058318] hub 3-0:1.0: USB hub found
[ 66.058322] hub 3-0:1.0: 2 ports detected
[ 66.161960] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20
[ 66.161972] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 66.162001] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 66.162022] uhci_hcd 0000:00:10.3: irq 20, io base 0x0000e400
[ 66.162114] usb usb4: configuration #1 chosen from 1 choice
[ 66.162130] hub 4-0:1.0: USB hub found
[ 66.162134] hub 4-0:1.0: 2 ports detected
[ 66.266115] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20
[ 66.266129] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 66.266156] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 66.266191] ehci_hcd 0000:00:10.4: irq 20, io mem 0xfae00000
[ 66.321598] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 66.333547] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 66.333675] usb usb5: configuration #1 chosen from 1 choice
[ 66.333700] hub 5-0:1.0: USB hub found
[ 66.333706] hub 5-0:1.0: 8 ports detected
[ 66.437778] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 66.438338] eth1: RealTek RTL8139 at 0xb000, 00:00:c5:c1:e9:62, IRQ 17
[ 66.438340] eth1: Identified 8139 chip type 'RTL-8139C'
[ 66.451432] Driver 'sd' needs updating - please use bus_type methods
[ 66.451541] sd 5:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 66.451554] sd 5:0:0:0: [sda] Write Protect is off
[ 66.451556] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 66.451570] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 66.451613] sd 5:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 66.451620] sd 5:0:0:0: [sda] Write Protect is off
[ 66.451622] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 66.451632] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 66.451636] sda: sda1 sda2 < sda5 >
[ 66.488161] sd 5:0:0:0: [sda] Attached SCSI disk
[ 66.488221] sd 5:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 66.488233] sd 5:0:1:0: [sdb] Write Protect is off
[ 66.488236] sd 5:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 66.488249] sd 5:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 66.488290] sd 5:0:1:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 66.488297] sd 5:0:1:0: [sdb] Write Protect is off
[ 66.488299] sd 5:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 66.488310] sd 5:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 66.488314] sdb: sdb1
[ 66.504647] sd 5:0:1:0: [sdb] Attached SCSI disk
[ 66.512311] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 66.512330] sd 5:0:1:0: Attached scsi generic sg1 type 0
[ 66.861903] Attempting manual resume
[ 66.861908] swsusp: Resume From Partition 8:5
[ 66.861910] PM: Checking swsusp image.
[ 66.862095] PM: Resume from disk failed.
[ 66.875027] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 66.875033] EXT3-fs: write access will be enabled during recovery.
[ 67.395561] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 67.528949] usb 5-2: configuration #1 chosen from 2 choices
[ 67.950628] usbcore: registered new interface driver libusual
[ 67.955990] Initializing USB Mass Storage driver...
[ 68.190069] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 68.388698] usb 2-2: configuration #1 chosen from 1 choice
[ 68.629256] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 68.808814] usb 3-1: configuration #1 chosen from 1 choice
[ 68.821548] scsi7 : SCSI emulation for USB Mass Storage devices
[ 68.824979] usb-storage: device found at 2
[ 68.824983] usb-storage: waiting for device to settle before scanning
[ 68.830389] scsi8 : SCSI emulation for USB Mass Storage devices
[ 68.831269] usbcore: registered new interface driver usb-storage
[ 68.831273] USB Mass Storage support registered.
[ 68.831376] usbcore: registered new interface driver hiddev
[ 68.831529] usb-storage: device found at 2
[ 68.831530] usb-storage: waiting for device to settle before scanning
[ 68.848685] input: Logitech Logitech(R) Precision(TM) Gamepad as /devices/pci0000:00/0000:00:10.2/usb3/3-1/3-1:1.0/input/input2
[ 68.848728] input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech(R) Precision(TM) Gamepad] on usb-0000:00:10.2-1
[ 68.848745] usbcore: registered new interface driver usbhid
[ 68.848749] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 73.418564] kjournald starting. Commit interval 5 seconds
[ 73.418593] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 73.418601] ext3_orphan_cleanup: deleting unreferenced inode 3489803
[ 73.418638] EXT3-fs: sda1: 1 orphan inode deleted
[ 73.418640] EXT3-fs: recovery complete.
[ 73.420307] EXT3-fs: mounted filesystem with ordered data mode.
[ 73.815732] usb-storage: device scan complete
[ 73.818389] scsi 7:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[ 73.820322] sd 7:0:0:0: [sdc] 1982464 2048-byte hardware sectors (4060 MB)
[ 73.820609] usb-storage: device scan complete
[ 73.821320] sd 7:0:0:0: [sdc] Write Protect is off
[ 73.821323] sd 7:0:0:0: [sdc] Mode Sense: 68 00 00 08
[ 73.821325] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 73.823565] sd 7:0:0:0: [sdc] 1982464 2048-byte hardware sectors (4060 MB)
[ 73.823603] scsi 8:0:0:0: Direct-Access HP Photosmart 370 s 1.00 PQ: 0 ANSI: 2
[ 73.824439] sd 7:0:0:0: [sdc] Write Protect is off
[ 73.824441] sd 7:0:0:0: [sdc] Mode Sense: 68 00 00 08
[ 73.824443] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 73.824446] sdc: sdc1 sdc2
[ 73.827471] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 73.827525] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 73.832597] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 73.832617] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 83.011787] Linux agpgart interface v0.102
[ 83.062276] agpgart: Detected AGP bridge 0
[ 83.072854] agpgart: AGP aperture is 64M @ 0xec000000
[ 83.122145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 83.166666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 83.457849] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 83.490935] input: Power Button (FF) as /devices/virtual/input/input4
[ 83.501442] ACPI: Power Button (FF) [PWRF]
[ 83.501560] input: Power Button (CM) as /devices/virtual/input/input5
[ 83.513353] ACPI: Power Button (CM) [PWRB]
[ 83.513446] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 83.529330] ACPI: Sleep Button (CM) [SLPB]
[ 83.721064] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 83.805147] phy0: Selected rate control algorithm 'simple'
[ 84.247224] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[ 84.247238] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 21
[ 84.650256] nvidia: module license 'NVIDIA' taints kernel.
[ 84.994578] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 85.473740] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1302
[ 85.473764] usbcore: registered new interface driver usblp
[ 85.497839] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[ 85.497863] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 85.498027] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
[ 85.498164] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 85.850810] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 85.927786] parport_pc 00:08: reported by Plug and Play ACPI
[ 85.927831] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 86.063458] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 86.063749] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008
[ 88.226734] lp0: using parport0 (interrupt-driven).
[ 88.297020] Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k
[ 88.835193] EXT3 FS on sda1, internal journal
[ 89.607153] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 90.014291] No dock devices found.
[ 90.280320] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu cores) (version 2.20.00)
[ 90.281773] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 91.194159] ppdev: user-space parallel port driver
[ 91.433458] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 91.433464] apm: overridden by ACPI.
[ 94.867132] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 94.882430] skge eth0: enabling interface
[ 94.952776] Bluetooth: Core ver 2.11
[ 94.954741] NET: Registered protocol family 31
[ 94.954747] Bluetooth: HCI device and connection manager initialized
[ 94.954752] Bluetooth: HCI socket layer initialized
[ 94.977358] Bluetooth: L2CAP ver 2.9
[ 94.977364] Bluetooth: L2CAP socket layer initialized
[ 95.042003] Bluetooth: RFCOMM socket layer initialized
[ 95.042026] Bluetooth: RFCOMM TTY layer initialized
[ 95.042028] Bluetooth: RFCOMM ver 1.8
[ 97.033511] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 97.033834] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 97.034073] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 97.209102] NET: Registered protocol family 17
[88287.921248] UDP: short packet: From 60.30.68.152:49345 16111/112 to 75.136.128.122:33326
[104982.174411] UDP: short packet: From 58.192.38.214:20907 8702/109 to 75.136.128.122:40732
[133038.115085] NVRM: Xid (0001:00): 9, Channel 00000003 Instance 0000269e status 0000001d
[229694.952945] NVRM: Xid (0001:00): 9, Channel 00000003 Instance 0000269e status 0000001d
brandon@brandon-desktop ~ $ mount
/dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.24-24-generic/volatile type tmpfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/brandon/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=brandon)
/dev/sdc2 on /media/IPOD type vfat (rw,nosuid,nodev,uhelper=hal,shortname=mixed,uid=1000,utf8,umask=077,flush)
brandon@brandon-desktop ~ $
thebrandon
Level 1
Level 1
 
Posts: 8
Joined: Fri May 22, 2009 2:09 pm

Re: CD Rom wont mount

Postby Husse on Thu Jun 04, 2009 5:50 am

I don't see anything obviously wrong
Do you have an IPOD connected?
/dev/sdc2 on /media/IPOD

Disconnect it and see what happens
And what is sdb? It's nowhere to be seen (but my eyes :))
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19714
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: CD Rom wont mount

Postby VisiGoth on Fri Jun 05, 2009 12:40 pm

dmesg result prior to CDROM insertion:

[ 0.529101] regulator: core version 0.5
[ 0.529153] NET: Registered protocol family 16
[ 0.529348] EISA bus registered
[ 0.529372] ACPI: bus type pci registered
[ 0.531372] PCI: PCI BIOS revision 2.10 entry at 0xfd999, last bus=2
[ 0.531375] PCI: Using configuration type 1 for base access
[ 0.533875] ACPI: EC: Look up EC in DSDT
[ 0.540553] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.540770] ACPI: Interpreter enabled
[ 0.540770] ACPI: (supports S0 S3 S4 S5)
[ 0.540770] ACPI: Using PIC for interrupt routing
[ 0.548546] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.548546] ACPI: EC: driver started in interrupt mode
[ 0.560877] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.560897] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.560960] pci 0000:00:00.0: reg 10 32bit mmio: [0xec000000-0xefffffff]
[ 0.561090] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.561149] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.561259] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.561268] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.561273] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.561299] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.561308] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.561316] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.561324] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.561332] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
[ 0.561340] pci 0000:00:1f.1: reg 24 32bit mmio: [0xe8000000-0xe80003ff]
[ 0.561399] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.561440] pci 0000:00:1f.6: reg 10 io port: [0x2000-0x20ff]
[ 0.561449] pci 0000:00:1f.6: reg 14 io port: [0x1c00-0x1c7f]
[ 0.561522] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.561529] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.561536] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8100000-0xe810ffff]
[ 0.561555] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.561566] pci 0000:01:00.0: supports D1 D2
[ 0.561610] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.561614] pci 0000:00:01.0: bridge 32bit mmio: [0xe8100000-0xe81fffff]
[ 0.561620] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.561664] pci 0000:02:02.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.561676] pci 0000:02:02.0: supports D1 D2
[ 0.561679] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.561684] pci 0000:02:02.0: PME# disabled
[ 0.561722] pci 0000:02:02.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.561733] pci 0000:02:02.1: supports D1 D2
[ 0.561736] pci 0000:02:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.561741] pci 0000:02:02.1: PME# disabled
[ 0.561785] pci 0000:02:03.0: reg 10 io port: [0x5000-0x50ff]
[ 0.561830] pci 0000:02:03.0: supports D1 D2
[ 0.561833] pci 0000:02:03.0: PME# supported from D1 D2 D3hot
[ 0.561838] pci 0000:02:03.0: PME# disabled
[ 0.561878] pci 0000:02:05.0: reg 10 32bit mmio: [0xe8207000-0xe82077ff]
[ 0.561886] pci 0000:02:05.0: reg 14 32bit mmio: [0xe8200000-0xe8203fff]
[ 0.561924] pci 0000:02:05.0: supports D1 D2
[ 0.561927] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.561931] pci 0000:02:05.0: PME# disabled
[ 0.561970] pci 0000:02:08.0: reg 10 32bit mmio: [0xe8206000-0xe8206fff]
[ 0.561978] pci 0000:02:08.0: reg 14 io port: [0x5400-0x543f]
[ 0.562012] pci 0000:02:08.0: supports D1 D2
[ 0.562014] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.562019] pci 0000:02:08.0: PME# disabled
[ 0.562056] pci 0000:00:1e.0: transparent bridge
[ 0.562062] pci 0000:00:1e.0: bridge io port: [0x4000-0x5fff]
[ 0.562068] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8200000-0xe87fffff]
[ 0.562119] bus 00 -> node 0
[ 0.562127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.564052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.564086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.565868] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.566013] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.566160] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[ 0.566302] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.566444] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 0.566622] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[ 0.566766] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
[ 0.566910] ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
[ 0.567062] ACPI: Power Resource [PFN0] (off)
[ 0.567062] ACPI: Power Resource [PFN1] (off)
[ 0.567062] ACPI: WMI: Mapper loaded
[ 0.567062] SCSI subsystem initialized
[ 0.567062] libata version 3.00 loaded.
[ 0.567062] usbcore: registered new interface driver usbfs
[ 0.567062] usbcore: registered new interface driver hub
[ 0.567062] usbcore: registered new device driver usb
[ 0.568144] PCI: Using ACPI for IRQ routing
[ 0.568272] Bluetooth: Core ver 2.13
[ 0.568272] NET: Registered protocol family 31
[ 0.568272] Bluetooth: HCI device and connection manager initialized
[ 0.568272] Bluetooth: HCI socket layer initialized
[ 0.568272] NET: Registered protocol family 8
[ 0.568272] NET: Registered protocol family 20
[ 0.568272] NetLabel: Initializing
[ 0.568272] NetLabel: domain hash size = 128
[ 0.568272] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.568272] NetLabel: unlabeled traffic allowed by default
[ 0.568378] AppArmor: AppArmor Filesystem Enabled
[ 0.568398] pnp: PnP ACPI init
[ 0.568398] ACPI: bus type pnp registered
[ 0.580032] pnp: PnP ACPI: found 11 devices
[ 0.580035] ACPI: ACPI bus type pnp unregistered
[ 0.580042] PnPBIOS: Disabled by ACPI PNP
[ 0.580060] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.580063] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.580067] system 00:01: ioport range 0x1c0-0x1cf has been reserved
[ 0.580070] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.580073] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.580077] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.580080] system 00:01: ioport range 0x610-0x61f has been reserved
[ 0.580085] system 00:01: iomem range 0xff800000-0xffbfffff could not be reserved
[ 0.580089] system 00:01: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.580092] system 00:01: iomem range 0x0-0x9ffff could not be reserved
[ 0.580095] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.580099] system 00:01: iomem range 0x100000-0x2fffffff could not be reserved
[ 0.580102] system 00:01: iomem range 0xfebffc00-0xfebfffff has been reserved
[ 0.614896] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.614900] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.614906] pci 0000:00:01.0: MEM window: 0xe8100000-0xe81fffff
[ 0.614910] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[ 0.614928] pci 0000:02:02.0: CardBus bridge, secondary bus 0000:03
[ 0.614931] pci 0000:02:02.0: IO window: 0x004000-0x0040ff
[ 0.614936] pci 0000:02:02.0: IO window: 0x004400-0x0044ff
[ 0.614941] pci 0000:02:02.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.614946] pci 0000:02:02.0: MEM window: 0x48000000-0x4bffffff
[ 0.614952] pci 0000:02:02.1: CardBus bridge, secondary bus 0000:07
[ 0.614954] pci 0000:02:02.1: IO window: 0x004800-0x0048ff
[ 0.614959] pci 0000:02:02.1: IO window: 0x004c00-0x004cff
[ 0.614964] pci 0000:02:02.1: PREFETCH window: 0x44000000-0x47ffffff
[ 0.614969] pci 0000:02:02.1: MEM window: 0x4c000000-0x4fffffff
[ 0.614974] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.614978] pci 0000:00:1e.0: IO window: 0x4000-0x5fff
[ 0.614984] pci 0000:00:1e.0: MEM window: 0xe8200000-0xe87fffff
[ 0.614990] pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x00000047ffffff
[ 0.615011] pci 0000:00:1e.0: setting latency timer to 64
[ 0.615023] pci 0000:02:02.0: power state changed by ACPI to D0
[ 0.615258] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.615262] PCI: setting IRQ 10 as level-triggered
[ 0.615268] pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 0.615279] pci 0000:02:02.1: power state changed by ACPI to D0
[ 0.615287] pci 0000:02:02.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 0.615295] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.615297] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.615300] bus: 01 index 0 io port: [0x3000-0x3fff]
[ 0.615303] bus: 01 index 1 mmio: [0xe8100000-0xe81fffff]
[ 0.615306] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff]
[ 0.615308] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.615311] bus: 02 index 0 io port: [0x4000-0x5fff]
[ 0.615313] bus: 02 index 1 mmio: [0xe8200000-0xe87fffff]
[ 0.615316] bus: 02 index 2 mmio: [0x40000000-0x47ffffff]
[ 0.615319] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.615321] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.615324] bus: 03 index 0 io port: [0x4000-0x40ff]
[ 0.615326] bus: 03 index 1 io port: [0x4400-0x44ff]
[ 0.615329] bus: 03 index 2 mmio: [0x40000000-0x43ffffff]
[ 0.615332] bus: 03 index 3 mmio: [0x48000000-0x4bffffff]
[ 0.615334] bus: 07 index 0 io port: [0x4800-0x48ff]
[ 0.615337] bus: 07 index 1 io port: [0x4c00-0x4cff]
[ 0.615340] bus: 07 index 2 mmio: [0x44000000-0x47ffffff]
[ 0.615342] bus: 07 index 3 mmio: [0x4c000000-0x4fffffff]
[ 0.615357] NET: Registered protocol family 2
[ 0.615525] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.615993] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.617491] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.618430] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.618437] TCP reno registered
[ 0.618689] NET: Registered protocol family 1
[ 0.618880] checking if image is initramfs... it is
[ 1.116043] Switched to high resolution mode on CPU 0
[ 1.385241] Freeing initrd memory: 7383k freed
[ 1.385336] Simple Boot Flag at 0x36 set to 0x1
[ 1.385537] cpufreq: No nForce2 chipset.
[ 1.385740] audit: initializing netlink socket (disabled)
[ 1.385773] type=2000 audit(1244195138.384:1): initialized
[ 1.393947] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.395480] VFS: Disk quotas dquot_6.5.1
[ 1.395554] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.396395] fuse init (API version 7.10)
[ 1.396509] msgmni has been set to 1497
[ 1.396769] alg: No test for stdrng (krng)
[ 1.396788] io scheduler noop registered
[ 1.396790] io scheduler anticipatory registered
[ 1.396793] io scheduler deadline registered
[ 1.396820] io scheduler cfq registered (default)
[ 1.396884] pci 0000:01:00.0: Boot video device
[ 1.396926] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.405888] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.405902] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.406407] ACPI: AC Adapter [ACAD] (on-line)
[ 1.421278] ACPI: Battery Slot [BAT1] (battery present)
[ 1.421650] ACPI: Battery Slot [BAT2] (battery absent)
[ 1.421747] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.421751] ACPI: Power Button (FF) [PWRF]
[ 1.421816] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.422158] ACPI: Lid Switch [LID]
[ 1.422218] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.422221] ACPI: Sleep Button (CM) [SLPB]
[ 1.422969] fan PNP0C0B:00: registered as cooling_device0
[ 1.422978] ACPI: Fan [FAN0] (off)
[ 1.423129] fan PNP0C0B:01: registered as cooling_device1
[ 1.423137] ACPI: Fan [FAN1] (off)
[ 1.423320] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.423345] processor ACPI_CPU:00: registered as cooling_device2
[ 1.423350] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.492943] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.494750] ACPI: Thermal Zone [THRM] (34 C)
[ 1.494812] isapnp: Scanning for PnP cards...
[ 1.848798] isapnp: No Plug & Play device found
[ 1.850535] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.850643] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.851099] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.851443] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.851450] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 1.851458] serial 0000:00:1f.6: PCI INT B disabled
[ 1.852503] brd: module loaded
[ 1.852960] loop: module loaded
[ 1.853090] Fixed MDIO Bus: probed
[ 1.853100] PPP generic driver version 2.4.2
[ 1.853188] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.853239] Driver 'sd' needs updating - please use bus_type methods
[ 1.853253] Driver 'sr' needs updating - please use bus_type methods
[ 1.853363] ata_piix 0000:00:1f.1: version 2.12
[ 1.853386] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.853393] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.853405] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.853485] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.853726] scsi0 : ata_piix
[ 1.853935] scsi1 : ata_piix
[ 1.855561] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 1.855565] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 2.040617] ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
[ 2.040622] ata1.00: 78140160 sectors, multi 16: LBA
[ 2.040664] ata1.01: ATAPI: UJDA360, 1.03, max UDMA/33
[ 2.040692] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 2.056568] ata1.00: configured for UDMA/33
[ 2.088349] ata1.01: configured for UDMA/33
[ 2.244230] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
[ 2.244374] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.244397] sd 0:0:0:0: [sda] Write Protect is off
[ 2.244401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.244435] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244535] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.244555] sd 0:0:0:0: [sda] Write Protect is off
[ 2.244558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.244590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244595] sda: sda1
[ 2.271316] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.271394] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.290876] scsi 0:0:1:0: CD-ROM MATSHITA UJDA360 1.03 PQ: 0 ANSI: 5
[ 2.295981] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.295986] Uniform CD-ROM driver Revision: 3.20
[ 2.296151] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.296217] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.297065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.297089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.297109] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.297444] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 2.297450] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 2.297462] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.297466] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.297574] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.297604] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
[ 2.297730] usb usb1: configuration #1 chosen from 1 choice
[ 2.297767] hub 1-0:1.0: USB hub found
[ 2.297782] hub 1-0:1.0: 2 ports detected
[ 2.298148] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 2.298152] PCI: setting IRQ 5 as level-triggered
[ 2.298157] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 2.298166] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.298170] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.298234] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.298260] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
[ 2.298361] usb usb2: configuration #1 chosen from 1 choice
[ 2.298395] hub 2-0:1.0: USB hub found
[ 2.298408] hub 2-0:1.0: 2 ports detected
[ 2.298571] usbcore: registered new interface driver libusual
[ 2.298618] usbcore: registered new interface driver usbserial
[ 2.298635] USB Serial support registered for generic
[ 2.298654] usbcore: registered new interface driver usbserial_generic
[ 2.298657] usbserial: USB Serial Driver core
[ 2.298721] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
[ 2.299886] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.300529] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.300538] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.300541] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.300544] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.300547] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.300778] mice: PS/2 mouse device common for all mice
[ 2.300987] rtc_cmos 00:04: RTC can wake from S4
[ 2.301037] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.301058] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 2.301168] device-mapper: uevent: version 1.0.3
[ 2.301325] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.301390] device-mapper: multipath: version 1.0.5 loaded
[ 2.301395] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.301516] EISA: Probing bus 0 at eisa.0
[ 2.301527] Cannot allocate resource for EISA slot 1
[ 2.301531] Cannot allocate resource for EISA slot 2
[ 2.301533] Cannot allocate resource for EISA slot 3
[ 2.301536] Cannot allocate resource for EISA slot 4
[ 2.301539] Cannot allocate resource for EISA slot 5
[ 2.301553] EISA: Detected 0 cards.
[ 2.301658] cpuidle: using governor ladder
[ 2.301745] cpuidle: using governor menu
[ 2.302399] TCP cubic registered
[ 2.302497] NET: Registered protocol family 10
[ 2.303043] lo: Disabled Privacy Extensions
[ 2.303436] NET: Registered protocol family 17
[ 2.303466] Bluetooth: L2CAP ver 2.11
[ 2.303469] Bluetooth: L2CAP socket layer initialized
[ 2.303473] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.303475] Bluetooth: SCO socket layer initialized
[ 2.303531] Bluetooth: RFCOMM socket layer initialized
[ 2.303549] Bluetooth: RFCOMM TTY layer initialized
[ 2.303551] Bluetooth: RFCOMM ver 1.10
[ 2.303603] IO APIC resources could be not be allocated.
[ 2.303653] Using IPI No-Shortcut mode
[ 2.303783] registered taskstats version 1
[ 2.303914] Magic number: 13:562:777
[ 2.304085] rtc_cmos 00:04: setting system clock to 2009-06-05 09:45:39 UTC (1244195139)
[ 2.304090] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.304093] EDD information not available.
[ 2.304977] Freeing unused kernel memory: 532k freed
[ 2.305111] Write protecting the kernel text: 4128k
[ 2.305156] Write protecting the kernel read-only data: 1532k
[ 2.343062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.948689] Floppy drive(s): fd0 is 1.44M
[ 2.967319] FDC 0 is a National Semiconductor PC87306
[ 3.321639] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 3.321644] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.322056] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 3.322062] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 3.346275] e100 0000:02:08.0: PME# disabled
[ 3.370195] e100: eth0: e100_probe: addr 0xe8206000, irq 10, MAC addr 00:e0:b8:53:74:1e
[ 3.370249] ohci1394 0000:02:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 3.420128] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8207000-e82077ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.304014] Marking TSC unstable due to TSC halts in idle
[ 4.737165] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0b80602004350]
[ 4.738261] kjournald starting. Commit interval 5 seconds
[ 4.738290] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.466711] udev: starting version 141
[ 14.885205] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
[ 14.916356] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.295093] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.583220] parport_pc 00:08: reported by Plug and Play ACPI
[ 15.583303] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 15.612034] Clocksource tsc unstable (delta = -62501370 ns)
[ 15.868107] Linux agpgart interface v0.103
[ 15.943278] intel_rng: FWH not detected
[ 15.966376] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 16.003288] ppdev: user-space parallel port driver
[ 16.026843] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 16.031135] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xec000000
[ 16.154568] yenta_cardbus 0000:02:02.0: CardBus bridge found [107b:0602]
[ 16.154591] yenta_cardbus 0000:02:02.0: Enabling burst memory read transactions
[ 16.154597] yenta_cardbus 0000:02:02.0: Using CSCINT to route CSC interrupts to PCI
[ 16.154600] yenta_cardbus 0000:02:02.0: Routing CardBus interrupts to PCI
[ 16.154606] yenta_cardbus 0000:02:02.0: TI: mfunc 0x011c1112, devctl 0x64
[ 16.174943] iTCO_vendor_support: vendor-support=0
[ 16.177989] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 16.178159] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[ 16.178272] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.238190] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 16.387345] yenta_cardbus 0000:02:02.0: ISA IRQ mask 0x0818, PCI irq 10
[ 16.387352] yenta_cardbus 0000:02:02.0: Socket status: 30000006
[ 16.387358] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 16.387371] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
[ 16.387376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x5fff: clean.
[ 16.387920] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff
[ 16.387924] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[ 16.393369] yenta_cardbus 0000:02:02.1: CardBus bridge found [107b:0602]
[ 16.393390] yenta_cardbus 0000:02:02.1: Using CSCINT to route CSC interrupts to PCI
[ 16.393394] yenta_cardbus 0000:02:02.1: Routing CardBus interrupts to PCI
[ 16.393400] yenta_cardbus 0000:02:02.1: TI: mfunc 0x011c1112, devctl 0x64
[ 16.624984] yenta_cardbus 0000:02:02.1: ISA IRQ mask 0x0818, PCI irq 10
[ 16.624990] yenta_cardbus 0000:02:02.1: Socket status: 30000020
[ 16.624995] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 16.625007] yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
[ 16.625012] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x5fff: clean.
[ 16.625554] yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff
[ 16.625559] yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[ 16.627228] Maestro3 0000:02:03.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 16.627239] Maestro3 0000:02:03.0: firmware: requesting ess/maestro3_assp_kernel.fw
[ 16.704832] Maestro3 0000:02:03.0: firmware: requesting ess/maestro3_assp_minisrc.fw
[ 16.739657] psmouse serio2: ID: 10 00 64<5>pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[ 17.260192] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
[ 17.297195] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio2/input/input7
[ 17.348693] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 17.350619] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 17.351438] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 17.352178] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 17.353090] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 17.354774] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 17.356738] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 17.357556] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 17.358258] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 17.359166] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 17.405356] b43-pci-bridge 0000:07:00.0: enabling device (0000 -> 0002)
[ 17.405376] b43-pci-bridge 0000:07:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 17.405391] b43-pci-bridge 0000:07:00.0: setting latency timer to 64
[ 17.413018] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 17.464305] ssb: Sonics Silicon Backplane found on PCI device 0000:07:00.0
[ 17.563699] cfg80211: Calling CRDA to update world regulatory domain
[ 17.676002] cfg80211: World regulatory domain updated:
[ 17.676058] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.676063] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.676066] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.676069] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.676072] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.676075] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.867161] b43-phy0: Broadcom 4318 WLAN found
[ 17.933600] phy0: Selected rate control algorithm 'pid'
[ 17.996806] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 18.165507] lp0: using parport0 (interrupt-driven).
[ 18.292265] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1c4cb1, caps: 0x80471b/0x0
[ 18.337637] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 18.844401] EXT3 FS on loop0, internal journal
[ 32.676387] Adding 976552k swap on /host/mint/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 39.264872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.264876] Bluetooth: BNEP filters: protocol multicast
[ 39.325106] Bridge firewalling registered
[ 40.742783] pci 0000:01:00.0: power state changed by ACPI to D0
[ 40.742801] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 41.097936] [drm] Initialized drm 1.1.0 20060810
[ 41.203822] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 41.477097] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 41.477120] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 41.477144] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 41.700139] [drm] Setting GART location based on new memory map
[ 41.700149] [drm] Loading R200 Microcode
[ 41.700205] [drm] writeback test succeeded in 1 usecs
[ 44.822013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.890768] input: b43-phy0 as /devices/virtual/input/input9
[ 44.952089] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 44.956476] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 44.956484] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drive ... cefirmware and download the latest firmware (version 4).
[ 44.977278] input: b43-phy0 as /devices/virtual/input/input10
[ 45.048087] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 45.051934] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 45.051942] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drive ... cefirmware and download the latest firmware (version 4).
VisiGoth
Level 1
Level 1
 
Posts: 6
Joined: Tue Jan 20, 2009 1:53 pm

Re: CD Rom wont mount

Postby VisiGoth on Fri Jun 05, 2009 12:42 pm

2nd dmesg result:
With CD ROM inserted:

[ 0.000000] Normal zone: 190865 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000002fef0000 - 000000002feff000
[ 0.000000] PM: Registered nosave memory: 000000002feff000 - 000000002ff00000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cfb80000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194805
[ 0.000000] Kernel command line: root=/dev/sda1 loop=/mint/disks/root.disk ro ROOTFLAGS=syncio quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2392.308 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 3929600 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 759140k/785920k available (4126k kernel code, 25948k reserved, 2208k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf0780000 - 0xff3fe000 ( 236 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xeff80000 ( 767 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.61 BogoMIPS (lpj=9569232)
[ 0.004040] Security Framework initialized
[ 0.004051] SELinux: Disabled at boot.
[ 0.004075] AppArmor: AppArmor initialized
[ 0.004091] Mount-cache hash table entries: 512
[ 0.004274] Initializing cgroup subsys ns
[ 0.004281] Initializing cgroup subsys cpuacct
[ 0.004286] Initializing cgroup subsys memory
[ 0.004293] Initializing cgroup subsys freezer
[ 0.004315] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004321] CPU: L2 cache: 512K
[ 0.004326] CPU: Hyper-Threading is disabled
[ 0.004347] Checking 'hlt' instruction... OK.
[ 0.020904] SMP alternatives: switching to UP code
[ 0.144911] Freeing SMP alternatives: 18k freed
[ 0.144918] ACPI: Core revision 20080926
[ 0.151556] ACPI: Checking initramfs for custom DSDT
[ 0.522135] ACPI: setting ELCR to 0200 (from 0420)
[ 0.524088] weird, boot CPU (#0) not listedby the BIOS.
[ 0.524092] SMP motherboard not detected.
[ 0.524096] Local APIC not detected. Using dummy APIC emulation.
[ 0.524098] SMP disabled
[ 0.528211] Brought up 1 CPUs
[ 0.528215] Total of 1 processors activated (4784.61 BogoMIPS).
[ 0.528232] CPU0 attaching NULL sched-domain.
[ 0.528744] net_namespace: 776 bytes
[ 0.528768] Booting paravirtualized kernel on bare hardware
[ 0.529092] Time: 9:45:37 Date: 06/05/09
[ 0.529101] regulator: core version 0.5
[ 0.529153] NET: Registered protocol family 16
[ 0.529348] EISA bus registered
[ 0.529372] ACPI: bus type pci registered
[ 0.531372] PCI: PCI BIOS revision 2.10 entry at 0xfd999, last bus=2
[ 0.531375] PCI: Using configuration type 1 for base access
[ 0.533875] ACPI: EC: Look up EC in DSDT
[ 0.540553] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.540770] ACPI: Interpreter enabled
[ 0.540770] ACPI: (supports S0 S3 S4 S5)
[ 0.540770] ACPI: Using PIC for interrupt routing
[ 0.548546] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.548546] ACPI: EC: driver started in interrupt mode
[ 0.560877] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.560897] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.560960] pci 0000:00:00.0: reg 10 32bit mmio: [0xec000000-0xefffffff]
[ 0.561090] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.561149] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.561259] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.561268] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.561273] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.561299] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.561308] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.561316] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.561324] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.561332] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
[ 0.561340] pci 0000:00:1f.1: reg 24 32bit mmio: [0xe8000000-0xe80003ff]
[ 0.561399] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.561440] pci 0000:00:1f.6: reg 10 io port: [0x2000-0x20ff]
[ 0.561449] pci 0000:00:1f.6: reg 14 io port: [0x1c00-0x1c7f]
[ 0.561522] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.561529] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.561536] pci 0000:01:00.0: reg 18 32bit mmio: [0xe8100000-0xe810ffff]
[ 0.561555] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.561566] pci 0000:01:00.0: supports D1 D2
[ 0.561610] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.561614] pci 0000:00:01.0: bridge 32bit mmio: [0xe8100000-0xe81fffff]
[ 0.561620] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.561664] pci 0000:02:02.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.561676] pci 0000:02:02.0: supports D1 D2
[ 0.561679] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.561684] pci 0000:02:02.0: PME# disabled
[ 0.561722] pci 0000:02:02.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.561733] pci 0000:02:02.1: supports D1 D2
[ 0.561736] pci 0000:02:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.561741] pci 0000:02:02.1: PME# disabled
[ 0.561785] pci 0000:02:03.0: reg 10 io port: [0x5000-0x50ff]
[ 0.561830] pci 0000:02:03.0: supports D1 D2
[ 0.561833] pci 0000:02:03.0: PME# supported from D1 D2 D3hot
[ 0.561838] pci 0000:02:03.0: PME# disabled
[ 0.561878] pci 0000:02:05.0: reg 10 32bit mmio: [0xe8207000-0xe82077ff]
[ 0.561886] pci 0000:02:05.0: reg 14 32bit mmio: [0xe8200000-0xe8203fff]
[ 0.561924] pci 0000:02:05.0: supports D1 D2
[ 0.561927] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.561931] pci 0000:02:05.0: PME# disabled
[ 0.561970] pci 0000:02:08.0: reg 10 32bit mmio: [0xe8206000-0xe8206fff]
[ 0.561978] pci 0000:02:08.0: reg 14 io port: [0x5400-0x543f]
[ 0.562012] pci 0000:02:08.0: supports D1 D2
[ 0.562014] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.562019] pci 0000:02:08.0: PME# disabled
[ 0.562056] pci 0000:00:1e.0: transparent bridge
[ 0.562062] pci 0000:00:1e.0: bridge io port: [0x4000-0x5fff]
[ 0.562068] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8200000-0xe87fffff]
[ 0.562119] bus 00 -> node 0
[ 0.562127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.564052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.564086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.565868] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.566013] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.566160] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[ 0.566302] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.566444] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 0.566622] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[ 0.566766] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
[ 0.566910] ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
[ 0.567062] ACPI: Power Resource [PFN0] (off)
[ 0.567062] ACPI: Power Resource [PFN1] (off)
[ 0.567062] ACPI: WMI: Mapper loaded
[ 0.567062] SCSI subsystem initialized
[ 0.567062] libata version 3.00 loaded.
[ 0.567062] usbcore: registered new interface driver usbfs
[ 0.567062] usbcore: registered new interface driver hub
[ 0.567062] usbcore: registered new device driver usb
[ 0.568144] PCI: Using ACPI for IRQ routing
[ 0.568272] Bluetooth: Core ver 2.13
[ 0.568272] NET: Registered protocol family 31
[ 0.568272] Bluetooth: HCI device and connection manager initialized
[ 0.568272] Bluetooth: HCI socket layer initialized
[ 0.568272] NET: Registered protocol family 8
[ 0.568272] NET: Registered protocol family 20
[ 0.568272] NetLabel: Initializing
[ 0.568272] NetLabel: domain hash size = 128
[ 0.568272] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.568272] NetLabel: unlabeled traffic allowed by default
[ 0.568378] AppArmor: AppArmor Filesystem Enabled
[ 0.568398] pnp: PnP ACPI init
[ 0.568398] ACPI: bus type pnp registered
[ 0.580032] pnp: PnP ACPI: found 11 devices
[ 0.580035] ACPI: ACPI bus type pnp unregistered
[ 0.580042] PnPBIOS: Disabled by ACPI PNP
[ 0.580060] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.580063] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.580067] system 00:01: ioport range 0x1c0-0x1cf has been reserved
[ 0.580070] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.580073] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.580077] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.580080] system 00:01: ioport range 0x610-0x61f has been reserved
[ 0.580085] system 00:01: iomem range 0xff800000-0xffbfffff could not be reserved
[ 0.580089] system 00:01: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.580092] system 00:01: iomem range 0x0-0x9ffff could not be reserved
[ 0.580095] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.580099] system 00:01: iomem range 0x100000-0x2fffffff could not be reserved
[ 0.580102] system 00:01: iomem range 0xfebffc00-0xfebfffff has been reserved
[ 0.614896] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.614900] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.614906] pci 0000:00:01.0: MEM window: 0xe8100000-0xe81fffff
[ 0.614910] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[ 0.614928] pci 0000:02:02.0: CardBus bridge, secondary bus 0000:03
[ 0.614931] pci 0000:02:02.0: IO window: 0x004000-0x0040ff
[ 0.614936] pci 0000:02:02.0: IO window: 0x004400-0x0044ff
[ 0.614941] pci 0000:02:02.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.614946] pci 0000:02:02.0: MEM window: 0x48000000-0x4bffffff
[ 0.614952] pci 0000:02:02.1: CardBus bridge, secondary bus 0000:07
[ 0.614954] pci 0000:02:02.1: IO window: 0x004800-0x0048ff
[ 0.614959] pci 0000:02:02.1: IO window: 0x004c00-0x004cff
[ 0.614964] pci 0000:02:02.1: PREFETCH window: 0x44000000-0x47ffffff
[ 0.614969] pci 0000:02:02.1: MEM window: 0x4c000000-0x4fffffff
[ 0.614974] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.614978] pci 0000:00:1e.0: IO window: 0x4000-0x5fff
[ 0.614984] pci 0000:00:1e.0: MEM window: 0xe8200000-0xe87fffff
[ 0.614990] pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x00000047ffffff
[ 0.615011] pci 0000:00:1e.0: setting latency timer to 64
[ 0.615023] pci 0000:02:02.0: power state changed by ACPI to D0
[ 0.615258] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.615262] PCI: setting IRQ 10 as level-triggered
[ 0.615268] pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 0.615279] pci 0000:02:02.1: power state changed by ACPI to D0
[ 0.615287] pci 0000:02:02.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 0.615295] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.615297] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.615300] bus: 01 index 0 io port: [0x3000-0x3fff]
[ 0.615303] bus: 01 index 1 mmio: [0xe8100000-0xe81fffff]
[ 0.615306] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff]
[ 0.615308] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.615311] bus: 02 index 0 io port: [0x4000-0x5fff]
[ 0.615313] bus: 02 index 1 mmio: [0xe8200000-0xe87fffff]
[ 0.615316] bus: 02 index 2 mmio: [0x40000000-0x47ffffff]
[ 0.615319] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.615321] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.615324] bus: 03 index 0 io port: [0x4000-0x40ff]
[ 0.615326] bus: 03 index 1 io port: [0x4400-0x44ff]
[ 0.615329] bus: 03 index 2 mmio: [0x40000000-0x43ffffff]
[ 0.615332] bus: 03 index 3 mmio: [0x48000000-0x4bffffff]
[ 0.615334] bus: 07 index 0 io port: [0x4800-0x48ff]
[ 0.615337] bus: 07 index 1 io port: [0x4c00-0x4cff]
[ 0.615340] bus: 07 index 2 mmio: [0x44000000-0x47ffffff]
[ 0.615342] bus: 07 index 3 mmio: [0x4c000000-0x4fffffff]
[ 0.615357] NET: Registered protocol family 2
[ 0.615525] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.615993] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.617491] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.618430] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.618437] TCP reno registered
[ 0.618689] NET: Registered protocol family 1
[ 0.618880] checking if image is initramfs... it is
[ 1.116043] Switched to high resolution mode on CPU 0
[ 1.385241] Freeing initrd memory: 7383k freed
[ 1.385336] Simple Boot Flag at 0x36 set to 0x1
[ 1.385537] cpufreq: No nForce2 chipset.
[ 1.385740] audit: initializing netlink socket (disabled)
[ 1.385773] type=2000 audit(1244195138.384:1): initialized
[ 1.393947] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.395480] VFS: Disk quotas dquot_6.5.1
[ 1.395554] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.396395] fuse init (API version 7.10)
[ 1.396509] msgmni has been set to 1497
[ 1.396769] alg: No test for stdrng (krng)
[ 1.396788] io scheduler noop registered
[ 1.396790] io scheduler anticipatory registered
[ 1.396793] io scheduler deadline registered
[ 1.396820] io scheduler cfq registered (default)
[ 1.396884] pci 0000:01:00.0: Boot video device
[ 1.396926] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.405888] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.405902] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.406407] ACPI: AC Adapter [ACAD] (on-line)
[ 1.421278] ACPI: Battery Slot [BAT1] (battery present)
[ 1.421650] ACPI: Battery Slot [BAT2] (battery absent)
[ 1.421747] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.421751] ACPI: Power Button (FF) [PWRF]
[ 1.421816] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.422158] ACPI: Lid Switch [LID]
[ 1.422218] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.422221] ACPI: Sleep Button (CM) [SLPB]
[ 1.422969] fan PNP0C0B:00: registered as cooling_device0
[ 1.422978] ACPI: Fan [FAN0] (off)
[ 1.423129] fan PNP0C0B:01: registered as cooling_device1
[ 1.423137] ACPI: Fan [FAN1] (off)
[ 1.423320] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.423345] processor ACPI_CPU:00: registered as cooling_device2
[ 1.423350] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.492943] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.494750] ACPI: Thermal Zone [THRM] (34 C)
[ 1.494812] isapnp: Scanning for PnP cards...
[ 1.848798] isapnp: No Plug & Play device found
[ 1.850535] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.850643] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.851099] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.851443] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.851450] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 1.851458] serial 0000:00:1f.6: PCI INT B disabled
[ 1.852503] brd: module loaded
[ 1.852960] loop: module loaded
[ 1.853090] Fixed MDIO Bus: probed
[ 1.853100] PPP generic driver version 2.4.2
[ 1.853188] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.853239] Driver 'sd' needs updating - please use bus_type methods
[ 1.853253] Driver 'sr' needs updating - please use bus_type methods
[ 1.853363] ata_piix 0000:00:1f.1: version 2.12
[ 1.853386] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.853393] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.853405] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.853485] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.853726] scsi0 : ata_piix
[ 1.853935] scsi1 : ata_piix
[ 1.855561] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 1.855565] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 2.040617] ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
[ 2.040622] ata1.00: 78140160 sectors, multi 16: LBA
[ 2.040664] ata1.01: ATAPI: UJDA360, 1.03, max UDMA/33
[ 2.040692] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 2.056568] ata1.00: configured for UDMA/33
[ 2.088349] ata1.01: configured for UDMA/33
[ 2.244230] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
[ 2.244374] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.244397] sd 0:0:0:0: [sda] Write Protect is off
[ 2.244401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.244435] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244535] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.244555] sd 0:0:0:0: [sda] Write Protect is off
[ 2.244558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.244590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244595] sda: sda1
[ 2.271316] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.271394] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.290876] scsi 0:0:1:0: CD-ROM MATSHITA UJDA360 1.03 PQ: 0 ANSI: 5
[ 2.295981] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.295986] Uniform CD-ROM driver Revision: 3.20
[ 2.296151] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.296217] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.297065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.297089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.297109] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.297444] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 2.297450] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 2.297462] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.297466] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.297574] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.297604] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
[ 2.297730] usb usb1: configuration #1 chosen from 1 choice
[ 2.297767] hub 1-0:1.0: USB hub found
[ 2.297782] hub 1-0:1.0: 2 ports detected
[ 2.298148] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 2.298152] PCI: setting IRQ 5 as level-triggered
[ 2.298157] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 2.298166] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.298170] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.298234] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.298260] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
[ 2.298361] usb usb2: configuration #1 chosen from 1 choice
[ 2.298395] hub 2-0:1.0: USB hub found
[ 2.298408] hub 2-0:1.0: 2 ports detected
[ 2.298571] usbcore: registered new interface driver libusual
[ 2.298618] usbcore: registered new interface driver usbserial
[ 2.298635] USB Serial support registered for generic
[ 2.298654] usbcore: registered new interface driver usbserial_generic
[ 2.298657] usbserial: USB Serial Driver core
[ 2.298721] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
[ 2.299886] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.300529] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.300538] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.300541] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.300544] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.300547] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.300778] mice: PS/2 mouse device common for all mice
[ 2.300987] rtc_cmos 00:04: RTC can wake from S4
[ 2.301037] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.301058] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 2.301168] device-mapper: uevent: version 1.0.3
[ 2.301325] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.301390] device-mapper: multipath: version 1.0.5 loaded
[ 2.301395] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.301516] EISA: Probing bus 0 at eisa.0
[ 2.301527] Cannot allocate resource for EISA slot 1
[ 2.301531] Cannot allocate resource for EISA slot 2
[ 2.301533] Cannot allocate resource for EISA slot 3
[ 2.301536] Cannot allocate resource for EISA slot 4
[ 2.301539] Cannot allocate resource for EISA slot 5
[ 2.301553] EISA: Detected 0 cards.
[ 2.301658] cpuidle: using governor ladder
[ 2.301745] cpuidle: using governor menu
[ 2.302399] TCP cubic registered
[ 2.302497] NET: Registered protocol family 10
[ 2.303043] lo: Disabled Privacy Extensions
[ 2.303436] NET: Registered protocol family 17
[ 2.303466] Bluetooth: L2CAP ver 2.11
[ 2.303469] Bluetooth: L2CAP socket layer initialized
[ 2.303473] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.303475] Bluetooth: SCO socket layer initialized
[ 2.303531] Bluetooth: RFCOMM socket layer initialized
[ 2.303549] Bluetooth: RFCOMM TTY layer initialized
[ 2.303551] Bluetooth: RFCOMM ver 1.10
[ 2.303603] IO APIC resources could be not be allocated.
[ 2.303653] Using IPI No-Shortcut mode
[ 2.303783] registered taskstats version 1
[ 2.303914] Magic number: 13:562:777
[ 2.304085] rtc_cmos 00:04: setting system clock to 2009-06-05 09:45:39 UTC (1244195139)
[ 2.304090] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.304093] EDD information not available.
[ 2.304977] Freeing unused kernel memory: 532k freed
[ 2.305111] Write protecting the kernel text: 4128k
[ 2.305156] Write protecting the kernel read-only data: 1532k
[ 2.343062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.948689] Floppy drive(s): fd0 is 1.44M
[ 2.967319] FDC 0 is a National Semiconductor PC87306
[ 3.321639] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 3.321644] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.322056] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 3.322062] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 3.346275] e100 0000:02:08.0: PME# disabled
[ 3.370195] e100: eth0: e100_probe: addr 0xe8206000, irq 10, MAC addr 00:e0:b8:53:74:1e
[ 3.370249] ohci1394 0000:02:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 3.420128] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8207000-e82077ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.304014] Marking TSC unstable due to TSC halts in idle
[ 4.737165] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0b80602004350]
[ 4.738261] kjournald starting. Commit interval 5 seconds
[ 4.738290] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.466711] udev: starting version 141
[ 14.885205] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
[ 14.916356] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.295093] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.583220] parport_pc 00:08: reported by Plug and Play ACPI
[ 15.583303] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 15.612034] Clocksource tsc unstable (delta = -62501370 ns)
[ 15.868107] Linux agpgart interface v0.103
[ 15.943278] intel_rng: FWH not detected
[ 15.966376] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 16.003288] ppdev: user-space parallel port driver
[ 16.026843] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 16.031135] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xec000000
[ 16.154568] yenta_cardbus 0000:02:02.0: CardBus bridge found [107b:0602]
[ 16.154591] yenta_cardbus 0000:02:02.0: Enabling burst memory read transactions
[ 16.154597] yenta_cardbus 0000:02:02.0: Using CSCINT to route CSC interrupts to PCI
[ 16.154600] yenta_cardbus 0000:02:02.0: Routing CardBus interrupts to PCI
[ 16.154606] yenta_cardbus 0000:02:02.0: TI: mfunc 0x011c1112, devctl 0x64
[ 16.174943] iTCO_vendor_support: vendor-support=0
[ 16.177989] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 16.178159] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[ 16.178272] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.238190] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 16.387345] yenta_cardbus 0000:02:02.0: ISA IRQ mask 0x0818, PCI irq 10
[ 16.387352] yenta_cardbus 0000:02:02.0: Socket status: 30000006
[ 16.387358] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 16.387371] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
[ 16.387376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x5fff: clean.
[ 16.387920] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff
[ 16.387924] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[ 16.393369] yenta_cardbus 0000:02:02.1: CardBus bridge found [107b:0602]
[ 16.393390] yenta_cardbus 0000:02:02.1: Using CSCINT to route CSC interrupts to PCI
[ 16.393394] yenta_cardbus 0000:02:02.1: Routing CardBus interrupts to PCI
[ 16.393400] yenta_cardbus 0000:02:02.1: TI: mfunc 0x011c1112, devctl 0x64
[ 16.624984] yenta_cardbus 0000:02:02.1: ISA IRQ mask 0x0818, PCI irq 10
[ 16.624990] yenta_cardbus 0000:02:02.1: Socket status: 30000020
[ 16.624995] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 16.625007] yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
[ 16.625012] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x5fff: clean.
[ 16.625554] yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff
[ 16.625559] yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[ 16.627228] Maestro3 0000:02:03.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 16.627239] Maestro3 0000:02:03.0: firmware: requesting ess/maestro3_assp_kernel.fw
[ 16.704832] Maestro3 0000:02:03.0: firmware: requesting ess/maestro3_assp_minisrc.fw
[ 16.739657] psmouse serio2: ID: 10 00 64<5>pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[ 17.260192] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
[ 17.297195] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio2/input/input7
[ 17.348693] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 17.350619] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 17.351438] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 17.352178] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 17.353090] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 17.354774] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 17.356738] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 17.357556] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 17.358258] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 17.359166] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 17.405356] b43-pci-bridge 0000:07:00.0: enabling device (0000 -> 0002)
[ 17.405376] b43-pci-bridge 0000:07:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 17.405391] b43-pci-bridge 0000:07:00.0: setting latency timer to 64
[ 17.413018] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 17.464305] ssb: Sonics Silicon Backplane found on PCI device 0000:07:00.0
[ 17.563699] cfg80211: Calling CRDA to update world regulatory domain
[ 17.676002] cfg80211: World regulatory domain updated:
[ 17.676058] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.676063] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.676066] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.676069] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.676072] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.676075] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.867161] b43-phy0: Broadcom 4318 WLAN found
[ 17.933600] phy0: Selected rate control algorithm 'pid'
[ 17.996806] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 18.165507] lp0: using parport0 (interrupt-driven).
[ 18.292265] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1c4cb1, caps: 0x80471b/0x0
[ 18.337637] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 18.844401] EXT3 FS on loop0, internal journal
[ 32.676387] Adding 976552k swap on /host/mint/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 39.264872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.264876] Bluetooth: BNEP filters: protocol multicast
[ 39.325106] Bridge firewalling registered
[ 40.742783] pci 0000:01:00.0: power state changed by ACPI to D0
[ 40.742801] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 41.097936] [drm] Initialized drm 1.1.0 20060810
[ 41.203822] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 41.477097] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 41.477120] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 41.477144] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 41.700139] [drm] Setting GART location based on new memory map
[ 41.700149] [drm] Loading R200 Microcode
[ 41.700205] [drm] writeback test succeeded in 1 usecs
[ 44.822013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.890768] input: b43-phy0 as /devices/virtual/input/input9
[ 44.952089] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 44.956476] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 44.956484] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drive ... cefirmware and download the latest firmware (version 4).
[ 44.977278] input: b43-phy0 as /devices/virtual/input/input10
[ 45.048087] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 45.051934] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 45.051942] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drive ... cefirmware and download the latest firmware (version 4).
[ 2191.434026] nautilus[6188]: segfault at 8884008 ip b59697dd sp b6d0cfc0 error 4 in libbrasero-media.so.0.1.1[b5959000+1e000]
VisiGoth
Level 1
Level 1
 
Posts: 6
Joined: Tue Jan 20, 2009 1:53 pm

Re: CD Rom wont mount

Postby VisiGoth on Fri Jun 05, 2009 1:05 pm

Update on this:
There are bugs against this issue and related ones in Ubuntu.

Removing the Brasero application appears to resolve the issue.

See if this doesn't work for you.
VisiGoth
Level 1
Level 1
 
Posts: 6
Joined: Tue Jan 20, 2009 1:53 pm

Re: CD Rom wont mount

Postby Husse on Sat Jun 06, 2009 1:53 pm

and when I put a cdr in and click on it it gives the the error "Can't Mount File"

That should happen with a blank CDR
Try to remove Brasero as indicated
Image
Don't fix it if it ain't broken, don't break it if you can't fix it
Husse
Level 21
Level 21
 
Posts: 19714
Joined: Sun Feb 11, 2007 7:22 am
Location: Near Borås Sweden

Re: CD Rom wont mount

Postby thebrandon on Mon Jun 08, 2009 2:07 pm

I removed Brasero and also shut down and checked me ide and power cables again and when I started back up it worked fine. thanks for all the help!
thebrandon
Level 1
Level 1
 
Posts: 8
Joined: Fri May 22, 2009 2:09 pm

Linux Mint is funded by ads and donations.
 

Return to Hardware Support

Who is online

Users browsing this forum: stoffe and 16 guests