Internal Microphone issues

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read this

Internal Microphone issues

Postby OOHnirav on Sun Jun 14, 2009 8:36 pm

I'm using the main edition of Mint 7 on an HP Pavilion dv9700, and I just set my sound to work through esound instead of pulseaudio (if that matters). My internal microphone doesn't seem to be working, as I noticed recently in Skype. Can anyone help me find a driver or solution?

I'm still relatively new to any Linux distro, so I'm sorry if I'm not posting something else that could help find the source of the problem. If that's the case, ask me what you need to know, and I'll supply it.

Thanks in advance!

EDIT: I have additional information that might help...
When I go into volume control, check everything in the preferences, and click on the 'recording' tab, the microphone icon has a red x over it. However, when I click to get rid of the red x, exit the volume control, and re-enter the volume control, the red x is back. For some reason, I can't enable the microphone.

My microphone seemed to be using "conexant high definition smartaudio" according to Windows.
OOHnirav
Level 1
Level 1
 
Posts: 19
Joined: Fri Sep 26, 2008 3:00 am

Linux Mint is funded by ads and donations.
 

Re: Internal Microphone issues

Postby pdc_2 on Tue Jun 16, 2009 11:22 pm

try:

right-click on speaker icon on bottom bar;

Open Volume Control;

Preferences;

there will be a host of options: I can only suggest you try clicking some of the various microphone options;

if you select microphone capture: (on our desktop it is OFF by default); you then get a CAPTURE tab in the volume control window: again, by default, our microphone is set to ZERO by DEFAULT

eg see this posting in reference to the ASUS Eee 701 and Skype;

http://forums.geteasypeasy.com/viewtopi ... =12&t=1522

(sometimes you may find it easier to plug a USB headset in; go to Options in Skype; audio options etc)

another recommendation in skype audio options is "Change all settings to HDA Intel (hw:intel,0). Untick "allow Skype to manage mixer levels".""

let us know how you get along
pdc_2
Level 6
Level 6
 
Posts: 1143
Joined: Mon May 11, 2009 1:21 am

Re: Internal Microphone issues

Postby OOHnirav on Wed Jun 17, 2009 12:59 am

Thank you for your response. I re-installed the Main edition of Mint 7, so I'm starting on a clean slate in case I messed something up. My microphone currently still isn't working with Skype or with Sound Recorder.

After going to the volume control, preferences, and checking everything, my tabs show: Playback, Switches, and Sound Theme.

I am using the device called HDA NVidia (Alsa mixer), and the only visible mics are under the Playback tab and are listed as: Docking Mic, External Mic, and Internal Mic. Other meters (if relevant) are Master and PCM.

Everything is un-muted, at its highest volume setting. I may not have done something correctly, but I currently don't see anything that says "CAPTURE," which seems to disagree with you and every guide I have read.

Like you suggested, it may be easier to just get an external microphone, but I'd like to use the one in my computer if at all possible. In Skype, every sound device option shows '/dev/dsp', and none of the options give another choice.

In short, I have no idea where to go from here. If you or anyone else can suggest another course of action, I would be eternally grateful.
OOHnirav
Level 1
Level 1
 
Posts: 19
Joined: Fri Sep 26, 2008 3:00 am

Re: Internal Microphone issues

Postby pdc_2 on Wed Jun 17, 2009 4:53 am

hmmmmmmmmmm

right-click volume control; preferences; look in the right-hand colum; the top set of entries are "PLAYBACK" entries; at the bottom are "RECORDING" entries;

when I do not have any entry at the lower part of the list selected; (ie in the right column which has a "RECORDING" entry opposite), I do not get a RECORDING tab;

if I select any entry, that has "RECORDING" in the right-hand column, I create a RECORDING tab; so instead of just playback and switches tabs, I have three: playback, recording and switches;

If I click on the RECORDING tab, I get to see a microphone entry; curiously by default in Ubuntu, it is always set to zero;

can you find any of this?
pdc_2
Level 6
Level 6
 
Posts: 1143
Joined: Mon May 11, 2009 1:21 am

Re: Internal Microphone issues

Postby DiFS on Wed Jun 17, 2009 3:57 pm

Hi pdc_2 and OOHnirav,
I've had the same problem. I'm using a HP dv6770se and Mint 6 x64. There is not any Recording tab because there is not any Recording entries in right-click volume control; preferences; look in the right-hand column; only Playback and Switches.

I think this could be help:

Code: Select all
dfs@Diego-PC ~ $ sudo hwinfo --sound
26: PCI 07.0: 0403 Audio device                                 
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_10de_44a
  Unique ID: M71A.pFnfJVlfpX9
  SysFS ID: /devices/pci0000:00/0000:00:07.0
  SysFS BusID: 0000:00:07.0
  Hardware Class: sound
  Model: "nVidia MCP65 High Definition Audio"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x044a "MCP65 High Definition Audio"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x30cf
  Revision: 0xa1
  Driver: "HDA Intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xf2480000-0xf2483fff (rw,non-prefetchable)
  IRQ: 21 (1016617 events)
  Module Alias: "pci:v000010DEd0000044Asv0000103Csd000030CFbc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=new, avail=yes, need=no, active=unknown


Code: Select all
dfs@Diego-PC ~ $ sudo lspci -vv
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: [44] HyperTransport: Slave or Primary Interface
      Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
      Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
      Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
      Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
      Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
      Revision ID: 1.03
      Link Frequency 0: 800MHz
      Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
      Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
      Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
      Link Frequency 1: 200MHz
      Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
      Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
      Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
      Prefetchable memory behind bridge Upper: 00-00
      Bus Number: 00
   Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Region 0: I/O ports at 1d00 [size=256]

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 10
   Region 0: I/O ports at 3080 [size=64]
   Region 4: I/O ports at 3040 [size=64]
   Region 5: I/O ports at 3000 [size=64]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: nForce2_smbus
   Kernel modules: i2c-nforce2

00:01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin B routed to IRQ 255
   Region 0: Memory at f2200000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 10)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin A routed to IRQ 18
   Region 0: Memory at f2486000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ohci_hcd
   Kernel modules: ohci-hcd

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 20)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin B routed to IRQ 17
   Region 0: Memory at f2488000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [44] Debug port: BAR=1 offset=0098
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ehci_hcd
   Kernel modules: ehci-hcd

00:06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (250ns min, 5000ns max)
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at f2487000 (32-bit, non-prefetchable) [size=4K]
   Region 1: I/O ports at 30e0 [size=8]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
   Kernel driver in use: forcedeth
   Kernel modules: forcedeth

00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (500ns min, 1250ns max)
   Interrupt: pin B routed to IRQ 21
   Region 0: Memory at f2480000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
      Address: 0000000000000000  Data: 0000
      Masking: 00000000  Pending: 00000000
   Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
   Kernel driver in use: HDA Intel
   Kernel modules: snd-hda-intel

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
   Memory behind bridge: f2100000-f21fffff
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
   Capabilities: [b8] Subsystem: nVidia Corporation Device cb84
   Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP])
   Subsystem: Device f03c:30cf
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
   Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
   Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
   Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
   Region 4: I/O ports at 30c0 [size=16]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: pata_amd
   Kernel modules: pata_amd, ata_generic, pata_acpi

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO])
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin A routed to IRQ 23
   Region 0: I/O ports at 30f8 [size=8]
   Region 1: I/O ports at 30ec [size=4]
   Region 2: I/O ports at 30f0 [size=8]
   Region 3: I/O ports at 30e8 [size=4]
   Region 4: I/O ports at 30d0 [size=16]
   Region 5: Memory at f2484000 (32-bit, non-prefetchable) [size=8K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ahci
   Kernel modules: ahci, ata_generic, pata_acpi

00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4149
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #3, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   Memory behind bridge: f2000000-f20fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4151
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: cc000000-ceffffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4159
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
   I/O behind bridge: 00005000-00005fff
   Memory behind bridge: f0000000-f1ffffff
   Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4161
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Capabilities: [80] HyperTransport: Host or Secondary Interface
      !!! Possibly incomplete decoding
      Command: WarmRst+ DblEnd-
      Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
      Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
      Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Capabilities: [f0] Secure device <?>
   Kernel driver in use: k8temp
   Kernel modules: k8temp

03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
   Subsystem: Hewlett-Packard Company Device 137a
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [40] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
      Address: 00000000  Data: 0000
   Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
         ClockPM- Suprise- LLActRep- BwNot-
      LnkCtl:   ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
   Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
      Vector table: BAR=0 offset=00000000
      PBA: BAR=0 offset=00000000
   Capabilities: [100] Advanced Error Reporting <?>
   Capabilities: [140] Virtual Channel <?>
   Kernel driver in use: ath5k
   Kernel modules: ath5k, ath_pci

05:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 19
   Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
   Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
   Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
   Region 5: I/O ports at 4000 [size=128]
   Capabilities: [60] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
      Address: 0000000000000000  Data: 0000
   Capabilities: [78] Express (v1) Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep- BwNot-
      LnkCtl:   ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
   Capabilities: [100] Virtual Channel <?>
   Capabilities: [128] Power Budgeting <?>
   Capabilities: [600] Vendor Specific Information <?>
   Kernel driver in use: nvidia
   Kernel modules: nvidiafb, nvidia

07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 5
   Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [dc] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME+
   Kernel driver in use: ohci1394
   Kernel modules: ohci1394

07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 7
   Region 0: Memory at f2100800 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-
   Kernel driver in use: sdhci-pci
   Kernel modules: sdhci-pci

07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 10
   Region 0: Memory at f2100c00 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-
   Kernel driver in use: ricoh-mmc
   Kernel modules: ricoh_mmc

07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 10
   Region 0: Memory at f2101000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
   !!! Unknown header type 7f



I'm new in Linux too and I'm Brazilian, I don't speak english well. If you need more information just ask.
Thanks!
DiFS
Level 1
Level 1
 
Posts: 12
Joined: Thu Mar 26, 2009 2:34 pm

Re: Internal Microphone issues

Postby OOHnirav on Wed Jun 17, 2009 4:16 pm

pdc_2 wrote:hmmmmmmmmmm

right-click volume control; preferences; look in the right-hand colum; the top set of entries are "PLAYBACK" entries; at the bottom are "RECORDING" entries;

when I do not have any entry at the lower part of the list selected; (ie in the right column which has a "RECORDING" entry opposite), I do not get a RECORDING tab;

if I select any entry, that has "RECORDING" in the right-hand column, I create a RECORDING tab; so instead of just playback and switches tabs, I have three: playback, recording and switches;

If I click on the RECORDING tab, I get to see a microphone entry; curiously by default in Ubuntu, it is always set to zero;

can you find any of this?

After right clicking the speaker icon; Open Volume Control; Preferences; the right hand column only shows 5 Playback options (Master, PCM, Docking Mic, External Mic, Internal Mic) and 2 Switches (IEC958, IEC958 Default PCM). Maybe Mint isn't reading any microphone capabilities at all? :(


DiFS wrote:Hi pdc_2 and OOHnirav,
I've had the same problem. I'm using a HP dv6770se and Mint 6 x64. There is not any Recording tab because there is not any Recording entries in right-click volume control; preferences; look in the right-hand column; only Playback and Switches.

I think this could be help:

Code: Select all
dfs@Diego-PC ~ $ sudo hwinfo --sound
26: PCI 07.0: 0403 Audio device                                 
  [Created at pci.310]
  UDI: /org/freedesktop/Hal/devices/pci_10de_44a
  Unique ID: M71A.pFnfJVlfpX9
  SysFS ID: /devices/pci0000:00/0000:00:07.0
  SysFS BusID: 0000:00:07.0
  Hardware Class: sound
  Model: "nVidia MCP65 High Definition Audio"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x044a "MCP65 High Definition Audio"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x30cf
  Revision: 0xa1
  Driver: "HDA Intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xf2480000-0xf2483fff (rw,non-prefetchable)
  IRQ: 21 (1016617 events)
  Module Alias: "pci:v000010DEd0000044Asv0000103Csd000030CFbc04sc03i00"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=new, avail=yes, need=no, active=unknown


Code: Select all
dfs@Diego-PC ~ $ sudo lspci -vv
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: [44] HyperTransport: Slave or Primary Interface
      Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
      Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
      Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
      Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
      Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
      Revision ID: 1.03
      Link Frequency 0: 800MHz
      Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
      Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
      Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
      Link Frequency 1: 200MHz
      Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
      Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
      Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
      Prefetchable memory behind bridge Upper: 00-00
      Bus Number: 00
   Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Region 0: I/O ports at 1d00 [size=256]

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 10
   Region 0: I/O ports at 3080 [size=64]
   Region 4: I/O ports at 3040 [size=64]
   Region 5: I/O ports at 3000 [size=64]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: nForce2_smbus
   Kernel modules: i2c-nforce2

00:01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin B routed to IRQ 255
   Region 0: Memory at f2200000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 10)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin A routed to IRQ 18
   Region 0: Memory at f2486000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ohci_hcd
   Kernel modules: ohci-hcd

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 20)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin B routed to IRQ 17
   Region 0: Memory at f2488000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [44] Debug port: BAR=1 offset=0098
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ehci_hcd
   Kernel modules: ehci-hcd

00:06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (250ns min, 5000ns max)
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at f2487000 (32-bit, non-prefetchable) [size=4K]
   Region 1: I/O ports at 30e0 [size=8]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
   Kernel driver in use: forcedeth
   Kernel modules: forcedeth

00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (500ns min, 1250ns max)
   Interrupt: pin B routed to IRQ 21
   Region 0: Memory at f2480000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
      Address: 0000000000000000  Data: 0000
      Masking: 00000000  Pending: 00000000
   Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
   Kernel driver in use: HDA Intel
   Kernel modules: snd-hda-intel

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
   Memory behind bridge: f2100000-f21fffff
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
   Capabilities: [b8] Subsystem: nVidia Corporation Device cb84
   Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP])
   Subsystem: Device f03c:30cf
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
   Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
   Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
   Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
   Region 4: I/O ports at 30c0 [size=16]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: pata_amd
   Kernel modules: pata_amd, ata_generic, pata_acpi

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO])
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin A routed to IRQ 23
   Region 0: I/O ports at 30f8 [size=8]
   Region 1: I/O ports at 30ec [size=4]
   Region 2: I/O ports at 30f0 [size=8]
   Region 3: I/O ports at 30e8 [size=4]
   Region 4: I/O ports at 30d0 [size=16]
   Region 5: Memory at f2484000 (32-bit, non-prefetchable) [size=8K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ahci
   Kernel modules: ahci, ata_generic, pata_acpi

00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4149
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #3, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   Memory behind bridge: f2000000-f20fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4151
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: cc000000-ceffffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4159
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
   I/O behind bridge: 00005000-00005fff
   Memory behind bridge: f0000000-f1ffffff
   Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4161
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag- RBE+ FLReset-
      DevCtl:   Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Capabilities: [80] HyperTransport: Host or Secondary Interface
      !!! Possibly incomplete decoding
      Command: WarmRst+ DblEnd-
      Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
      Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
      Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Capabilities: [f0] Secure device <?>
   Kernel driver in use: k8temp
   Kernel modules: k8temp

03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
   Subsystem: Hewlett-Packard Company Device 137a
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [40] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
      Address: 00000000  Data: 0000
   Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
         ClockPM- Suprise- LLActRep- BwNot-
      LnkCtl:   ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
   Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
      Vector table: BAR=0 offset=00000000
      PBA: BAR=0 offset=00000000
   Capabilities: [100] Advanced Error Reporting <?>
   Capabilities: [140] Virtual Channel <?>
   Kernel driver in use: ath5k
   Kernel modules: ath5k, ath_pci

05:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 19
   Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
   Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
   Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
   Region 5: I/O ports at 4000 [size=128]
   Capabilities: [60] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
      Address: 0000000000000000  Data: 0000
   Capabilities: [78] Express (v1) Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep- BwNot-
      LnkCtl:   ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
   Capabilities: [100] Virtual Channel <?>
   Capabilities: [128] Power Budgeting <?>
   Capabilities: [600] Vendor Specific Information <?>
   Kernel driver in use: nvidia
   Kernel modules: nvidiafb, nvidia

07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 5
   Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [dc] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME+
   Kernel driver in use: ohci1394
   Kernel modules: ohci1394

07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 7
   Region 0: Memory at f2100800 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-
   Kernel driver in use: sdhci-pci
   Kernel modules: sdhci-pci

07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 10
   Region 0: Memory at f2100c00 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-
   Kernel driver in use: ricoh-mmc
   Kernel modules: ricoh_mmc

07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 10
   Region 0: Memory at f2101000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
   !!! Unknown header type 7f



I'm new in Linux too and I'm Brazilian, I don't speak english well. If you need more information just ask.
Thanks!

It sounds like you may have had the same problem, but I may be a little newer to Linux than you, because I have no idea what you are suggesting.. :/

I don't think anything is wrong with your English, I'm just confused.

EDIT: If you're suggesting that I post the result of the top input in the terminal:
Code: Select all
nirav@Thor ~ $ sudo hwinfo --sound
sudo: hwinfo: command not found


Code: Select all
nirav@Thor ~ $ sudo lspci -vv
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: [44] HyperTransport: Slave or Primary Interface
      Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
      Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
      Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
      Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
      Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
      Revision ID: 1.03
      Link Frequency 0: 800MHz
      Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
      Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
      Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
      Link Frequency 1: 200MHz
      Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
      Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
      Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
      Prefetchable memory behind bridge Upper: 00-00
      Bus Number: 00
   Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000

00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0

00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 10
   Region 0: I/O ports at 3080 [size=64]
   Region 4: I/O ports at 3040 [size=64]
   Region 5: I/O ports at 3000 [size=64]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin B routed to IRQ 11
   Region 0: Memory at f6200000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin A routed to IRQ 18
   Region 0: Memory at f6486000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ohci_hcd

00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin B routed to IRQ 22
   Region 0: Memory at f6489000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [44] Debug port: BAR=1 offset=0098
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ehci_hcd

00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin A routed to IRQ 18
   Region 0: Memory at f6487000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ohci_hcd

00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin B routed to IRQ 22
   Region 0: Memory at f6489400 (32-bit, non-prefetchable) [size=256]
   Capabilities: [44] Debug port: BAR=1 offset=0098
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: ehci_hcd

00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP])
   Subsystem: Device f03c:30cf
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
   Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
   Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
   Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
   Region 4: I/O ports at 30c0 [size=16]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: pata_amd

00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (500ns min, 1250ns max)
   Interrupt: pin A routed to IRQ 21
   Region 0: Memory at f6480000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
      Address: 0000000000000000  Data: 0000
      Masking: 00000000  Pending: 00000000
   Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
   Kernel driver in use: HDA Intel
   Kernel modules: snd-hda-intel

00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2) (prog-if 01)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
   Memory behind bridge: f6100000-f61fffff
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
   Capabilities: [b8] Subsystem: nVidia Corporation Device cb84
   Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000

00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO])
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (750ns min, 250ns max)
   Interrupt: pin A routed to IRQ 2301
   Region 0: I/O ports at 30f0 [size=8]
   Region 1: I/O ports at 30e4 [size=4]
   Region 2: I/O ports at 30e8 [size=8]
   Region 3: I/O ports at 30e0 [size=4]
   Region 4: I/O ports at 30d0 [size=16]
   Region 5: Memory at f6484000 (32-bit, non-prefetchable) [size=8K]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [8c] SATA HBA <?>
   Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
      Address: 00000000fee0300c  Data: 4161
   Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
   Kernel driver in use: ahci

00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0 (250ns min, 5000ns max)
   Interrupt: pin A routed to IRQ 2300
   Region 0: Memory at f6488000 (32-bit, non-prefetchable) [size=4K]
   Region 1: I/O ports at 30f8 [size=8]
   Region 2: Memory at f6489c00 (32-bit, non-prefetchable) [size=256]
   Region 3: Memory at f6489800 (32-bit, non-prefetchable) [size=16]
   Capabilities: [44] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
      Address: 00000000fee0300c  Data: 4199
      Masking: 000000fe  Pending: 00000000
   Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
   Kernel driver in use: forcedeth
   Kernel modules: forcedeth

00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: f2000000-f3ffffff
   Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4149
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag+ RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  2, PowerLimit 10.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   Memory behind bridge: f6000000-f60fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Subsystem: nVidia Corporation Device 0000
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
      Address: 00000000fee0300c  Data: 4151
   Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
      Mapping Address Base: 00000000fee00000
   Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
         ExtTag+ RBE+ FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
         ClockPM- Suprise- LLActRep+ BwNot-
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
         Slot #  3, PowerLimit 10.000000; Interlock- NoCompl-
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq+ LinkChg+
         Control: AttnInd Off, PwrInd On, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState-
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
   Capabilities: [100] Virtual Channel <?>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
   Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
   Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=16M]
   [virtual] Expansion ROM at f6280000 [disabled] [size=128K]
   Capabilities: [48] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
      Address: 0000000000000000  Data: 0000
   Kernel driver in use: nvidia
   Kernel modules: nvidia, nvidiafb

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Capabilities: [80] HyperTransport: Host or Secondary Interface
      !!! Possibly incomplete decoding
      Command: WarmRst+ DblEnd-
      Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
      Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
      Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Capabilities: [f0] Secure device <?>
   Kernel driver in use: k8temp
   Kernel modules: k8temp

02:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 5
   Region 0: Memory at f6100000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [dc] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME+
   Kernel driver in use: ohci1394
   Kernel modules: firewire-ohci, ohci1394

02:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 7
   Region 0: Memory at f6100800 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-
   Kernel driver in use: sdhci-pci
   Kernel modules: sdhci-pci

02:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 11
   Region 0: Memory at f6100c00 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-
   Kernel driver in use: ricoh-mmc
   Kernel modules: ricoh_mmc

02:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
   Subsystem: Hewlett-Packard Company Device 30cf
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 11
   Region 0: Memory at f6101000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [80] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
   !!! Unknown header type 7f

03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
   Subsystem: Hewlett-Packard Company Device 137a
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 19
   Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [40] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
      Address: 00000000  Data: 0000
   Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
         ClockPM- Suprise- LLActRep- BwNot-
      LnkCtl:   ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
   Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
      Vector table: BAR=0 offset=00000000
      PBA: BAR=0 offset=00000000
   Capabilities: [100] Advanced Error Reporting <?>
   Capabilities: [140] Virtual Channel <?>
   Kernel driver in use: ath5k_pci
   Kernel modules: ath_pci, ath5k
Last edited by OOHnirav on Wed Jun 17, 2009 9:37 pm, edited 1 time in total.
OOHnirav
Level 1
Level 1
 
Posts: 19
Joined: Fri Sep 26, 2008 3:00 am

Re: Internal Microphone issues

Postby DiFS on Wed Jun 17, 2009 4:35 pm

OOHnirav wrote:After right clicking the speaker icon; Open Volume Control; Preferences; right right hand column only shows 5 Playback options (Master, PCM, Docking Mic, External Mic, Internal Mic) and 2 Switches (IEC958, IEC958 Default PCM). Maybe Mint isn't reading any microphone capabilities at all? :(


The same here.

OOHnirav wrote:It sounds like you may have had the same problem, but I may be a little newer to Linux than you, because I have no idea what you are suggesting.. :/

I don't think anything is wrong with your English, I'm just confused.


Hi OOHnirav,
Sorry, I wasn't very clear. I was not trying to solve the problem, I was just showing my hardware information.
DiFS
Level 1
Level 1
 
Posts: 12
Joined: Thu Mar 26, 2009 2:34 pm

Re: Internal Microphone issues

Postby DiFS on Wed Jun 17, 2009 7:43 pm

Hi OOHnirav,
I got my skype to work using a external mic plugged and using in skype's voice device:
Audio Input: HDA Nvidia (hw:NVidia,0)
Audio Output: pulse
Bell: pulse

Works well on Sound Recorder too.
It's a little low, but that's OK. Controlled by External Mic in Volume Control on Playback tab.

If I let unplugged I can see in the level bar in bottom of Sound Recorder software that it is very low level, even with the Internal Mic on Playback tab is raised to 100%.

I believe that if you enable Mic Boost could solve the problem. But I don't know how to do that. Can anyone help to enable this?

I read in another forum the package gnome-volume-control-pulse (Ubuntu Desktop Team) can solve this problem, but I couldn't install it. I tried by synaptic and "sudo aptget install..." without success. It seems to be only available in Ubuntu Jaunty (9.04), so since you use Mint 7, this package is available for you.
DiFS
Level 1
Level 1
 
Posts: 12
Joined: Thu Mar 26, 2009 2:34 pm

Re: Internal Microphone issues

Postby OOHnirav on Wed Jun 17, 2009 8:27 pm

DiFS wrote:Hi OOHnirav,
I got my skype to work using a external mic plugged and using in skype's voice device:
Audio Input: HDA Nvidia (hw:NVidia,0)
Audio Output: pulse
Bell: pulse

Works well on Sound Recorder too.
It's a little low, but that's OK. Controlled by External Mic in Volume Control on Playback tab.

If I let unplugged I can see in the level bar in bottom of Sound Recorder software that it is very low level, even with the Internal Mic on Playback tab is raised to 100%.

I believe that if you enable Mic Boost could solve the problem. But I don't know how to do that. Can anyone help to enable this?

I read in another forum the package gnome-volume-control-pulse (Ubuntu Desktop Team) can solve this problem, but I couldn't install it. I tried by synaptic and "sudo aptget install..." without success. It seems to be only available in Ubuntu Jaunty (9.04), so since you use Mint 7, this package is available for you.

I don't currently own an external mic, so I can't test it out, but if there is no way to remedy this situation, I may go ahead and buy one.

I don't know how to enable a Mic Boost, either.

I downloaded the gnome-volume-control-pulse package, but nothing changed.. The only difference is that I now have two speaker icons on the bottom right, and I am unable to remove the new one (EDIT: I removed it by uninstalling the package).
OOHnirav
Level 1
Level 1
 
Posts: 19
Joined: Fri Sep 26, 2008 3:00 am

Re: Internal Microphone issues

Postby DiFS on Thu Jun 18, 2009 2:20 pm

OOHnirav wrote:I downloaded the gnome-volume-control-pulse package, but nothing changed.. The only difference is that I now have two speaker icons on the bottom right, and I am unable to remove the new one (EDIT: I removed it by uninstalling the package).


Sorry hear that, I will try to translate what I saw in the other forum:

AACFERREIRA wrote:Problem Solved,

Folks, it was not possible to place the mic boost in my sound card along with pulseaudio, the solution appeared to be more simple than expected.

It was needed to install the package gnome-volume-control-pulse maintained by Ubuntu Desktop Team without the Canonical support.

Once this package is activated, it will create a second icon in preferences for sound, inside it has a microphone input device, and there you can adjust the volume of capture.

Done it that people could hear me again in skype (or Gismo)

It creates in volume control a tab capture in the item device labeled:
Capture: Monitor of-HDA NVidia: ALC662 Analog (Pulseaudio mixer)

This item is only a tab named recording with a single control named Master
and adjusting it to the maximum level I have the same effect of Mic Boost. and so I have audio on VoIP


Maybe this could help you. I don't know what is Canonical support. And I believe capture tab means recording tab in your Mint. About the external mic I am using, it's not a USB mic. Here, it's named 3,5mm (plug) mic, I don't know the name in english.

Good luck!
DiFS
Level 1
Level 1
 
Posts: 12
Joined: Thu Mar 26, 2009 2:34 pm

Re: Internal Microphone issues

Postby OOHnirav on Thu Jun 18, 2009 6:08 pm

DiFS wrote:Sorry hear that, I will try to translate what I saw in the other forum:

AACFERREIRA wrote:Problem Solved,

Folks, it was not possible to place the mic boost in my sound card along with pulseaudio, the solution appeared to be more simple than expected.

It was needed to install the package gnome-volume-control-pulse maintained by Ubuntu Desktop Team without the Canonical support.

Once this package is activated, it will create a second icon in preferences for sound, inside it has a microphone input device, and there you can adjust the volume of capture.

Done it that people could hear me again in skype (or Gismo)

It creates in volume control a tab capture in the item device labeled:
Capture: Monitor of-HDA NVidia: ALC662 Analog (Pulseaudio mixer)

This item is only a tab named recording with a single control named Master
and adjusting it to the maximum level I have the same effect of Mic Boost. and so I have audio on VoIP


Maybe this could help you. I don't know what is Canonical support. And I believe capture tab means recording tab in your Mint. About the external mic I am using, it's not a USB mic. Here, it's named 3,5mm (plug) mic, I don't know the name in english.

Good luck!

Alright, I followed this. I think mint uses an "input" tab instead of "capture" or "recording". I used the sound recorder after installing the volume-control.

When I listen to my recording, I hear the sound that speakers make when they are cranked up and no sound is supposed to be coming out (I'm not sure what that sound is called, but I'll call it white noise). After experimenting, I figured out that if I tap on the microphone loudly enough, I could barely hear it within the white noise.

All in all, nothing was resolved, but this seems like a step in the right direction. Thanks for all the help so far! Any other suggestions would still be appreciated.

EDIT: Actually, I just un-installed the volume-control, and I can affect the white noise with the "internal mic" option in the standard volume control under the "Playback" tab. It's back to square one. :(
OOHnirav
Level 1
Level 1
 
Posts: 19
Joined: Fri Sep 26, 2008 3:00 am

Re: Internal Microphone issues

Postby revdjenk on Fri Jun 19, 2009 8:08 am

DIFS and all...

I am trying to see how I can help here, realizing that we have to deal with alsamixer and pulseaudio, however, I have everything working on my laptop with multimedia, sound output and input.
First, I have been Mint since 5, and alsamixer has "always" had a recording tab (I have never seen another term used) in alsamixer. To get the recording tab, however, one has to open alsamixer, open preferences (now it is a button on the bottom right of the main alsamixer window.) One then must select Capture (put a check in its checkbox). You may also need analog loopback. and one or more of Digital Input Source and Input Source. These may depend on your hardware/software mix. (I have only Capture (checked) and Analog Loopback (UNchecked) currently showing of the above mentioned.)

Second, open PulseAudio Device Chooser (under Sound & Video in the Main Menu) then click on the Pulse icon in your taskbar, and choose Manager, then click on the Devices tab.
You should have a sources section with at least two listings, one with the word output and another with input in its description. Highlight the INPUT listing, and then click on the Properties button. You should see a volume slider near the bottom of the new window. I am now not sure what it was originally in mine, maybe 100 or 120%. Originally with Audacity my recording was very low. By experimentation I currently have it at ~145-7% and my internal mic is picking up my voice comfortably from ~ 2 ft/.6m.
Using an external mic ohhh, not working!...let me play some more.... I used it just a month or so ago!
God Bless
Doug
Malachi 3:10 NRSV
...says the LORD of hosts... I will not open...windows...for you...

Linux user since 2001 pda; 2006 lappy
revdjenk
Level 4
Level 4
 
Posts: 339
Joined: Sat Nov 15, 2008 2:51 pm

Re: Internal Microphone issues

Postby revdjenk on Sat Jun 20, 2009 11:11 am

Internal and External Mics -- here is what is working for me:
My hardware:
Dell XPS 1330, Audio device: Intel Corporation 82801H (ICH8 Family)

In Alsamixer goto Preference button and enable (put checks in checkboxes):
Master, PCM, Front (I tried the Headphone channel but it does not affect headphone volume)
Capture
Analog Loopback
Digital Input source
Input source

in Alsamixer tabs
Playback - move all sliders up
Recording - move sliders up
Switches - Analog Loopback is unchecked by default, check it if you wish to hear mic input through headphones.
Options - Digital Input Source (Digital Mic 1 is default and uses internal mic if you have one) Select Analog Inputs if you wish to use an external mic.
Input Source - Front Mic is for 3.5mm jack, (Mic selection here is for USB mics? I do not have one to test.)

Caveats:
When you select Analog Loopback to listen through headphones as you record, I have not found a way to adjust volume level.

To add Mic Boost, open PulseAudio Device Chooser (under Sound & Video in the Main Menu) then click on the Pulse icon in your taskbar, and choose Manager, then click on the Devices tab.
You should have a sources section with at least two listings, one with the word output and another with input in its description. Highlight the INPUT listing, and then click on the Properties button. You should see a volume slider near the bottom of the new window. Originally at 100%. Currently have it at ~144% and my internal mic is picking up my voice comfortably from ~ 2 ft/.6m and at a reasonable volume.

God Bless
Doug
Malachi 3:10 NRSV
...says the LORD of hosts... I will not open...windows...for you...

Linux user since 2001 pda; 2006 lappy
revdjenk
Level 4
Level 4
 
Posts: 339
Joined: Sat Nov 15, 2008 2:51 pm

Re: Internal Microphone issues

Postby DiFS on Sat Jun 20, 2009 6:15 pm

Hi Doug,
First of all, you are right about the mic boost in PulseAudio Device Chooser > Manager > Device Tab > Properties. This really works with the external mic, but it didn't work with the internal mic. It seems Mint is getting a noise signal from a wrong device instead of the internal mic.

I will try to show you my Control Volume and all options:

HDDA NVidia (Alsa Mixer)
Image
Controle de Volume = Control Volume
Reproduzir = Playback
Chaves = Switches
Preferências = Preferences

In Preferences box you can see there is not any Capture checkbox.

Conexant CX20561 (Hermosa) (OSS Mixer)
Image
I don't know what Conexant is.

Playback: ALSA PCM on front:0 (CONEXANT Analog) via DMA (PulseAudio Mixer)
Image
It controls the output device.

Capture: Monitor Source of ALSA PCM on front:0 (CONEXANT Analog) via DMA (PulseAudio Mixer)
Image
Gravando = Recording
I don't know what this is supposed to control.

Capture: ALSA PCM on front:0 (CONEXANT Analog) via DMA (PulseAudio Mixer)
Image
It controls the external mic and is supposed to control the internal mic, at least is what is shown in PulseAudio Volume Meter.
That's all.

In PulseAudio Manager, this is what I get:
Image
The last source ( ALSA PCM on front...) controls the external mic and the noise signal that is supposed come from internal mic. Maybe I will talk bs but I believe that when I unplug my external mic, Mint continues to get the signal from the plug, so even with 400% in mic boost I only get a loud noise.

If only Mint knew where my internal mic is... :(
DiFS
Level 1
Level 1
 
Posts: 12
Joined: Thu Mar 26, 2009 2:34 pm

Re: Internal Microphone issues

Postby revdjenk on Sat Jun 20, 2009 11:10 pm

DIFS,

Your alsamixer looks NOTHING like mine! (and I am not referring to the language!) This must be because your audio card is different from mine.

Have you tried muting the external mic, to see if the internal mic is then used?
Otherwise, i don't have a clue...unless you have another audio card than the Conexant...only knew that company as a modem manufacturer!

God Bless
Doug
Malachi 3:10 NRSV
...says the LORD of hosts... I will not open...windows...for you...

Linux user since 2001 pda; 2006 lappy
revdjenk
Level 4
Level 4
 
Posts: 339
Joined: Sat Nov 15, 2008 2:51 pm

Re: Internal Microphone issues

Postby DiFS on Mon Jun 22, 2009 2:53 pm

revdjenk wrote:DIFS,

Your alsamixer looks NOTHING like mine! (and I am not referring to the language!) This must be because your audio card is different from mine.

Have you tried muting the external mic, to see if the internal mic is then used?
Otherwise, i don't have a clue...unless you have another audio card than the Conexant...only knew that company as a modem manufacturer!

God Bless
Doug


I've just tried, but still the same.
Thanks anyway!
DiFS
Level 1
Level 1
 
Posts: 12
Joined: Thu Mar 26, 2009 2:34 pm

Re: Internal Microphone issues

Postby kurisutofu on Thu Oct 08, 2009 6:34 am

I have exactly the same problem ...
It seems my netbook (Kohjinsha SX series) doesn't know an internet mic is available so it is not in the list. I only have "Front Mic" for the external microphone input, which works so yes, I could use an external microphone but I'd like to have both ...

Is there a way to detect or check the existence of the internal Mic?
kurisutofu
Level 1
Level 1
 
Posts: 33
Joined: Tue Oct 06, 2009 10:49 am
Location: New Tokyo - Japan

Linux Mint is funded by ads and donations.
 

Return to Hardware Support

Who is online

Users browsing this forum: No registered users and 11 guests