I have a problem with tv card hauppauge wintv-hvr-1110. I can't get sound to work in tvtime.
Here is what dmesg says:
Code: Select all
[ 9.519454] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 9.519516] saa7134 0000:04:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.519522] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 21, latency: 32, mmio: 0xfdcff000
[ 9.519527] saa7133[0]: subsystem: 0070:6707, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]
[ 9.519636] saa7133[0]: board init: gpio is 40000
[ 9.586955] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.671852] psmouse serio1: ID: 10 00 64<6>saa7133[0]: i2c eeprom 00: 70 00 07 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 9.676523] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 9.676528] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 b0 ff ff ff ff
[ 9.676533] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.676537] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 06 32 97 04 00 20 00 ff ff ff
[ 9.676542] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.676546] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.676550] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.676554] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 5b 5a 5f f0 73 05 29 00
[ 9.676558] saa7133[0]: i2c eeprom 90: 84 08 00 06 89 06 01 00 95 29 8d 72 07 70 73 09
[ 9.676563] saa7133[0]: i2c eeprom a0: 23 5f 73 0a f4 9b 72 0b 2f 72 0e 01 72 0f 45 72
[ 9.676567] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 73 13 a2 69 79 91 00 00 00 00 00
[ 9.676571] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.676575] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.676579] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.676584] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.741098] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.741103] nvidia 0000:01:00.0: setting latency timer to 64
[ 9.741252] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 9.748083] tuner' 1-004b: chip found @ 0x96 (saa7133[0])
[ 9.750567] tveeprom 1-0050: Hauppauge model 67209, rev C2F5, serial# 6249051
[ 9.750569] tveeprom 1-0050: MAC address is 00-0D-FE-5F-5A-5B
[ 9.750571] tveeprom 1-0050: tuner model is unknown (idx 155, type 0)
[ 9.750573] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 9.750580] tveeprom 1-0050: audio processor is SAA7131 (idx 41)
[ 9.750581] tveeprom 1-0050: decoder processor is SAA7131 (idx 35)
[ 9.750583] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
[ 9.750584] saa7133[0]: warning: unknown hauppauge model #67209
[ 9.750586] saa7133[0]: hauppauge eeprom: model=67209
[ 9.836023] tda829x 1-004b: setting tuner address to 60
[ 9.880346] tda18271 1-0060: creating new instance
[ 9.928022] TDA18271HD/C2 detected @ 1-0060
[ 10.309881] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 11.260020] tda18271: performing RF tracking filter calibration
[ 29.464019] tda18271: RF tracking filter calibration complete
[ 29.520521] tda829x 1-004b: type set to tda8290+18271
[ 34.453834] saa7133[0]: registered device video0 [v4l2]
[ 34.453861] saa7133[0]: registered device vbi0
[ 34.453888] saa7133[0]: registered device radio0
[ 34.525827] saa7134 ALSA driver for DMA sound loaded
[ 34.525844] saa7133[0]/alsa: saa7133[0] at 0xfdcff000 irq 21 registered as card -2
[ 34.561486] dvb_init() allocating 1 frontend
[ 34.571617] tda10046: chip is not answering. Giving up.
[ 34.619799] scsi10 : vhba
[ 34.647041] lp: driver loaded but no devices found
[ 34.712731] Adding 3911756k swap on /dev/sda6. Priority:-1 extents:1 across:3911756k
[ 35.233492] EXT3 FS on sda1, internal journal
[ 49.680030] tda18271_write_regs: ERROR: i2c_transfer returned: -5
[ 49.680117] tda18271_init: error -5 on line 805
[ 49.680183] tda18271_tune: error -5 on line 831
[ 49.680250] tda18271_set_analog_params: error -5 on line 968
Code: Select all
04:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
Subsystem: Hauppauge computer works Inc. Device 6707
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at fdcff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: saa7134
Kernel modules: saa7134
04:07.0 0480: 1131:7133 (rev d1)
Subsystem: 0070:6707
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at fdcff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: saa7134
Kernel modules: saa7134