Touchpad left-click not working on EeePC 900

Questions about hardware,drivers and peripherals
Forum rules
Before you post please read this

Touchpad left-click not working on EeePC 900

Postby Canard blanc on Tue Mar 30, 2010 11:47 am

Would appreciate some help.

Have Mint 8 installed on an Asus 900 EeePC.

Is Fn F8 supposed to toggle the Touchpad on or off?
If so, when doing so, nothing happens.

Also, the left-click button of the Touchpad does not work.

Tried inxi -F, but do not see anything related to the Touchpad.

The dmesg is long, and does not appear to have any info about it either. Is there a way to get dmesg just with the Touchpad info?

This EeePC had Windows XP installed on it, but I did not use the Touchpad with that OS.
Only tried to use it recently with Mint 8,

Any USB mouse works fine...

How does one check to see if the Touchpad driver is installed?

If you have any ideas as to what to try, they are welcomed.
Last edited by Canard blanc on Thu Apr 01, 2010 12:11 am, edited 1 time in total.
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Linux Mint is funded by ads and donations.
 

Re: Fn F8?

Postby BrianD on Tue Mar 30, 2010 12:52 pm

:sigh:

should I point out how cumbersome it is when you open multiple topics for the same issue? ...you just make it tougher for anybody to try to help you.

I would continue, but you've already indicated (in your original topic, which I've ignored by your request) that you don't want my help.
need I say more??
BrianD
Level 4
Level 4
 
Posts: 296
Joined: Fri Feb 12, 2010 12:22 am
Location: Tallahassee, Florida, USA

Re: Fn F8?

Postby Canard blanc on Tue Mar 30, 2010 11:50 pm

Booted from an SD card with EEEbuntu, and the same situation prevails:

Fn F8 does not toggle the Touchpad on or off.
The left-click button of the Touchpad does not work.

It does not appear to be a Mint 8 issue...

Have no clue as to what to do next.

Any new minds with ideas?

Thanks for the help!!
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Re: Fn F8?

Postby mick55 on Wed Mar 31, 2010 12:01 am

Since
It does not appear to be a Mint 8 issue..

How about the users manual?
http://www.gatzet.com/asus-eee-pc-900-user-manual.html

Or, check the EEE PC blog
http://eeepc.net/
Things are more like they are now than they ever were before.

Dwight D. Eisenhower (1890 - 1969)
User avatar
mick55
Level 7
Level 7
 
Posts: 1507
Joined: Fri Sep 25, 2009 2:47 am

Re: Fn F8?

Postby Canard blanc on Wed Mar 31, 2010 12:28 am

Thanks, mick55.

Had checked the manual, but, it addresses issues for the original Windows XP which was installed when the EeePC was bought.

Mint is running now (much faster) since XP and the 16GB SSD did not fare well (very s-l-o-w).

When the PC was purchased, I remember checking everything out, and do not recall any malfunctions.

It works fine with a USB mouse, but every now and then it is not convenient to use the mouse.

Do you know how to look for the Touchpad driver using the Terminal?
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Re: Fn F8?

Postby mick55 on Wed Mar 31, 2010 5:04 am

Run this command in a terminal
Code: Select all
xinput list

If one of the lines mentions a touchpad (or maybe "Synaptics" or "ALPS"),
your touchpad has been detected. Post the output here for analysis.

Also run this command in a terminal and post the output here for analysis.
Code: Select all
dmesg


thanks
mick
Things are more like they are now than they ever were before.

Dwight D. Eisenhower (1890 - 1969)
User avatar
mick55
Level 7
Level 7
 
Posts: 1507
Joined: Fri Sep 25, 2009 2:47 am

Re: Fn F8?

Postby Canard blanc on Wed Mar 31, 2010 10:43 am

Here it goes:

aaflac@aaflac-laptop ~ $ xinput list
"Virtual core pointer" id=0 [XPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 0
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 0
"Virtual core keyboard" id=1 [XKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"AT Translated Set 2 keyboard" id=2 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Video Bus" id=3 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Power Button" id=4 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Asus EeePC extra buttons" id=5 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Power Button" id=6 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Sleep Button" id=7 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"CNF7129" id=8 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"ETPS/2 Elantech Touchpad" id=9 [XExtensionPointer]
Type is TOUCHPAD
Num_buttons is 12
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is 8
Max_value is 1144
Resolution is 1
Axis 1 :
Min_value is 8
Max_value is 760
Resolution is 1
"Macintosh mouse button emulation" id=10 [XExtensionPointer]
Type is MOUSE
Num_buttons is 5
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
"Microsoft Compact Optical Mouse 500" id=11 [XExtensionPointer]
Type is MOUSE
Num_buttons is 7
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1


dmesg:

(>>Elantech is there @ [6.579330] and[ 6.662486]<<)

[ 0.128428] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.128435] pci 0000:00:1b.0: PME# disabled
[ 0.128516] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.128523] pci 0000:00:1c.0: PME# disabled
[ 0.128603] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.128611] pci 0000:00:1c.1: PME# disabled
[ 0.128696] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.128704] pci 0000:00:1c.2: PME# disabled
[ 0.128769] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.128835] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[ 0.128900] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.128965] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[ 0.129035] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.129100] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.129108] pci 0000:00:1d.7: PME# disabled
[ 0.129250] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.129262] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.129270] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.129277] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff
[ 0.129325] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.129336] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.129346] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.129356] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.129367] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.129401] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.129408] pci 0000:00:1f.2: PME# disabled
[ 0.129466] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.129621] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.129662] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff]
[ 0.129708] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.129717] pci 0000:03:00.0: PME# disabled
[ 0.129783] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.129856] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
[ 0.130002] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.130013] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.130076] pci 0000:00:1e.0: transparent bridge
[ 0.130111] pci_bus 0000:00: on NUMA node 0
[ 0.130125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.130440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.130551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.130651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.139361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.139614] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.139854] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.140114] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.140356] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.140598] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.140841] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.141086] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.141511] SCSI subsystem initialized
[ 0.141637] libata version 3.00 loaded.
[ 0.141807] usbcore: registered new interface driver usbfs
[ 0.141850] usbcore: registered new interface driver hub
[ 0.141905] usbcore: registered new device driver usb
[ 0.142176] ACPI: WMI: Mapper loaded
[ 0.142181] PCI: Using ACPI for IRQ routing
[ 0.142516] Bluetooth: Core ver 2.15
[ 0.142590] NET: Registered protocol family 31
[ 0.142594] Bluetooth: HCI device and connection manager initialized
[ 0.142600] Bluetooth: HCI socket layer initialized
[ 0.142605] NetLabel: Initializing
[ 0.142609] NetLabel: domain hash size = 128
[ 0.142612] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.142639] NetLabel: unlabeled traffic allowed by default
[ 0.142949] hpet clockevent registered
[ 0.142955] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.142964] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.142976] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.151556] pnp: PnP ACPI init
[ 0.151602] ACPI: bus type pnp registered
[ 0.155424] pnp: PnP ACPI: found 13 devices
[ 0.155431] ACPI: ACPI bus type pnp unregistered
[ 0.155439] PnPBIOS: Disabled by ACPI PNP
[ 0.155467] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.155487] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.155494] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.155501] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.155508] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.155515] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.155523] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.155531] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.155543] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.155550] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.155562] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.155574] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.155586] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.155593] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.155600] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.190456] AppArmor: AppArmor Filesystem Enabled
[ 0.190533] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.190539] pci 0000:00:1c.0: IO window: disabled
[ 0.190548] pci 0000:00:1c.0: MEM window: disabled
[ 0.190555] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.190564] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.190570] pci 0000:00:1c.1: IO window: disabled
[ 0.190580] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.190588] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.190597] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[ 0.190602] pci 0000:00:1c.2: IO window: disabled
[ 0.190612] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff
[ 0.190621] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.190634] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.190639] pci 0000:00:1e.0: IO window: disabled
[ 0.190648] pci 0000:00:1e.0: MEM window: disabled
[ 0.190655] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.190678] alloc irq_desc for 16 on node -1
[ 0.190682] alloc kstat_irqs on node -1
[ 0.190695] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.190704] pci 0000:00:1c.0: setting latency timer to 64
[ 0.190715] alloc irq_desc for 17 on node -1
[ 0.190719] alloc kstat_irqs on node -1
[ 0.190727] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.190734] pci 0000:00:1c.1: setting latency timer to 64
[ 0.190745] alloc irq_desc for 18 on node -1
[ 0.190749] alloc kstat_irqs on node -1
[ 0.190757] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.190764] pci 0000:00:1c.2: setting latency timer to 64
[ 0.190775] pci 0000:00:1e.0: setting latency timer to 64
[ 0.190784] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.190791] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.190798] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.190805] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.190811] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.190818] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.190824] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.190899] NET: Registered protocol family 2
[ 0.191086] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.191726] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.193392] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.194291] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.194298] TCP reno registered
[ 0.194513] NET: Registered protocol family 1
[ 0.194646] Trying to unpack rootfs image as initramfs...
[ 0.644023] Switched to high resolution mode on CPU 0
[ 0.689811] Freeing initrd memory: 8039k freed
[ 0.699656] cpufreq-nforce2: No nForce2 chipset.
[ 0.699720] Scanning for low memory corruption every 60 seconds
[ 0.699950] audit: initializing netlink socket (disabled)
[ 0.700071] type=2000 audit(1270021698.700:1): initialized
[ 0.719758] highmem bounce pool size: 64 pages
[ 0.719770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.722800] VFS: Disk quotas dquot_6.5.2
[ 0.722927] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.724440] fuse init (API version 7.12)
[ 0.724636] msgmni has been set to 1736
[ 0.725077] alg: No test for stdrng (krng)
[ 0.725106] io scheduler noop registered
[ 0.725111] io scheduler anticipatory registered
[ 0.725116] io scheduler deadline registered
[ 0.725219] io scheduler cfq registered (default)
[ 0.725246] pci 0000:00:02.0: Boot video device
[ 0.725545] alloc irq_desc for 24 on node -1
[ 0.725551] alloc kstat_irqs on node -1
[ 0.725570] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.725584] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.725766] alloc irq_desc for 25 on node -1
[ 0.725770] alloc kstat_irqs on node -1
[ 0.725782] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.725794] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.725975] alloc irq_desc for 26 on node -1
[ 0.725980] alloc kstat_irqs on node -1
[ 0.725991] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.726003] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.726158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.726381] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.726695] ACPI: AC Adapter [AC0] (off-line)
[ 0.726834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.726842] ACPI: Power Button [PWRF]
[ 0.726959] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.728146] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.737621] ACPI: Lid Switch [LID]
[ 0.737726] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.737732] ACPI: Sleep Button [SLPB]
[ 0.737838] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.737844] ACPI: Power Button [PWRB]
[ 0.738932] Marking TSC unstable due to TSC halts in idle
[ 0.738974] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.739028] processor LNXCPU:00: registered as cooling_device0
[ 0.739036] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.757992] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.758012] ACPI: Thermal Zone [TZ00] (27 C)
[ 0.758119] isapnp: Scanning for PnP cards...
[ 1.119671] isapnp: No Plug & Play device found
[ 1.122146] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.125066] brd: module loaded
[ 1.126125] loop: module loaded
[ 1.126297] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.126466] ahci 0000:00:1f.2: version 3.0
[ 1.126493] alloc irq_desc for 19 on node -1
[ 1.126498] alloc kstat_irqs on node -1
[ 1.126511] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.126535] ahci 0000:00:1f.2: PCI INT B disabled
[ 1.126546] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.126626] ata_piix 0000:00:1f.2: version 2.13
[ 1.126641] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.126651] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.126721] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.126870] scsi0 : ata_piix
[ 1.127140] scsi1 : ata_piix
[ 1.130559] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.130567] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.132602] Fixed MDIO Bus: probed
[ 1.132679] PPP generic driver version 2.4.2
[ 1.132901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.132948] alloc irq_desc for 23 on node -1
[ 1.132953] alloc kstat_irqs on node -1
[ 1.132968] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.132995] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.133002] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.133114] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.137092] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.137102] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.137335] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 1.152069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.152275] usb usb1: configuration #1 chosen from 1 choice
[ 1.152338] hub 1-0:1.0: USB hub found
[ 1.152356] hub 1-0:1.0: 8 ports detected
[ 1.152513] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.152555] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.152630] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.152646] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.152653] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.152736] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.152774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 1.152942] usb usb2: configuration #1 chosen from 1 choice
[ 1.153007] hub 2-0:1.0: USB hub found
[ 1.153022] hub 2-0:1.0: 2 ports detected
[ 1.153115] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.153129] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.153136] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.153213] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.153261] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 1.153425] usb usb3: configuration #1 chosen from 1 choice
[ 1.153483] hub 3-0:1.0: USB hub found
[ 1.153497] hub 3-0:1.0: 2 ports detected
[ 1.153581] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.153593] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.153600] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.153738] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.153785] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 1.153962] usb usb4: configuration #1 chosen from 1 choice
[ 1.154018] hub 4-0:1.0: USB hub found
[ 1.154032] hub 4-0:1.0: 2 ports detected
[ 1.154116] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.154129] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.154136] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.154215] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.154261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 1.154430] usb usb5: configuration #1 chosen from 1 choice
[ 1.154489] hub 5-0:1.0: USB hub found
[ 1.154503] hub 5-0:1.0: 2 ports detected
[ 1.154703] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.191539] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.191551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.191682] mice: PS/2 mouse device common for all mice
[ 1.191948] rtc_cmos 00:03: RTC can wake from S4
[ 1.193748] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.193784] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.194021] device-mapper: uevent: version 1.0.3
[ 1.194302] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.194414] device-mapper: multipath: version 1.1.0 loaded
[ 1.194420] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.194707] EISA: Probing bus 0 at eisa.0
[ 1.194752] EISA: Detected 0 cards.
[ 1.194934] cpuidle: using governor ladder
[ 1.195066] cpuidle: using governor menu
[ 1.196104] TCP cubic registered
[ 1.196450] NET: Registered protocol family 10
[ 1.197413] lo: Disabled Privacy Extensions
[ 1.198045] NET: Registered protocol family 17
[ 1.198089] Bluetooth: L2CAP ver 2.13
[ 1.198093] Bluetooth: L2CAP socket layer initialized
[ 1.198099] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.198103] Bluetooth: SCO socket layer initialized
[ 1.198176] Bluetooth: RFCOMM TTY layer initialized
[ 1.198183] Bluetooth: RFCOMM socket layer initialized
[ 1.198187] Bluetooth: RFCOMM ver 1.11
[ 1.198243] Using IPI No-Shortcut mode
[ 1.198391] PM: Resume from disk failed.
[ 1.198419] registered taskstats version 1
[ 1.198612] Magic number: 2:838:825
[ 1.198745] rtc_cmos 00:03: setting system clock to 2010-03-31 07:48:19 UTC (1270021699)
[ 1.198753] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.198757] EDD information not available.
[ 1.235467] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.315463] ata2.00: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 1.315471] ata2.00: 31522176 sectors, multi 0: LBA
[ 1.320276] ata2.00: configured for UDMA/66
[ 1.587657] ACPI: Battery Slot [BAT0] (battery present)
[ 1.587938] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5
[ 1.588222] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.588308] sd 1:0:0:0: [sda] 31522176 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 1.588407] sd 1:0:0:0: [sda] Write Protect is off
[ 1.588414] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.588466] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.588737] sda: sda1 sda2 < sda5 >
[ 1.591206] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.591241] Freeing unused kernel memory: 544k freed
[ 1.591818] Write protecting the kernel text: 4592k
[ 1.591959] Write protecting the kernel read-only data: 1836k
[ 1.624080] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.640017] Clocksource tsc unstable (delta = -83559401 ns)
[ 1.783203] usb 1-4: configuration #1 chosen from 1 choice
[ 1.900911] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 1.957916] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input6
[ 1.958001] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.034632] Linux agpgart interface v0.103
[ 2.140875] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 2.141215] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 2.146607] usb 1-5: configuration #1 chosen from 1 choice
[ 2.153142] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.261287] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 2.263825] [drm] Initialized drm 1.1.0 20060810
[ 2.295679] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.295690] i915 0000:00:02.0: setting latency timer to 64
[ 2.320725] i2c-adapter i2c-1: unable to read EDID block.
[ 2.320736] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2.322558] Initializing USB Mass Storage driver...
[ 2.322760] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.323043] scsi3 : SCSI emulation for USB Mass Storage devices
[ 2.323186] usbcore: registered new interface driver usb-storage
[ 2.323194] USB Mass Storage support registered.
[ 2.337180] usb-storage: device found at 4
[ 2.337187] usb-storage: waiting for device to settle before scanning
[ 2.337207] usb-storage: device found at 3
[ 2.337211] usb-storage: waiting for device to settle before scanning
[ 2.616810] [drm] DAC-6: set mode 640x480 0
[ 2.707414] i2c-adapter i2c-1: unable to read EDID block.
[ 2.707426] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2.748339] [drm] TV-12: set mode NTSC 480i 0
[ 2.876637] [drm] fb0: inteldrmfb frame buffer device
[ 2.876656] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.892795] usb 1-8: configuration #1 chosen from 1 choice
[ 2.954351] render error detected, EIR: 0x00000010
[ 2.954356] page table error
[ 2.954360] PGTBL_ER: 0x00000100
[ 2.954366] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 2.954379] render error detected, EIR: 0x00000010
[ 2.954383] page table error
[ 2.954385] PGTBL_ER: 0x00000100
[ 2.973012] [drm] LVDS-8: set mode 1024x600 16
[ 3.042619] Console: switching to colour frame buffer device 128x37
[ 3.232028] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 3.305805] xor: automatically using best checksumming function: pIII_sse
[ 3.324010] pIII_sse : 2339.000 MB/sec
[ 3.324016] xor: using function: pIII_sse (2339.000 MB/sec)
[ 3.331374] device-mapper: dm-raid45: initialized v0.2594b
[ 3.426485] usb 3-1: configuration #1 chosen from 1 choice
[ 3.464456] usbcore: registered new interface driver hiddev
[ 3.488900] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[ 3.489074] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.1-1/input0
[ 3.489111] usbcore: registered new interface driver usbhid
[ 3.489118] usbhid: v2.6:USB HID core driver
[ 3.718087] PM: Starting manual resume from disk
[ 3.718098] PM: Resume from partition 8:5
[ 3.718103] PM: Checking hibernation image.
[ 3.718648] PM: Resume from disk failed.
[ 3.727189] EXT4-fs (sda1): barriers enabled
[ 3.730651] kjournald2 starting: pid 371, dev sda1:8, commit interval 5 seconds
[ 3.730677] EXT4-fs (sda1): delayed allocation enabled
[ 3.730684] EXT4-fs: file extents enabled
[ 3.733781] EXT4-fs: mballoc enabled
[ 3.733812] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.361521] Adding 706820k swap on /dev/sda5. Priority:-1 extents:1 across:706820k
[ 4.512701] udev: starting version 147
[ 4.589422] lp: driver loaded but no devices found
[ 4.773128] eeepc_laptop: Eee PC Hotkey Driver
[ 4.774595] EXT4-fs (sda1): internal journal on sda1:8
[ 4.918171] eeepc_laptop: Hotkey init flags 0x41
[ 4.919460] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 4.919470] eeepc_laptop: Get control methods supported: 0x2101711
[ 4.919607] input: Asus EeePC extra buttons as /devices/virtual/input/input8
[ 5.414588] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 5.414596] Copyright (c) 2007 Atheros Corporation.
[ 5.414675] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.414692] atl2 0000:03:00.0: setting latency timer to 64
[ 5.598257] cfg80211: Calling CRDA to update world regulatory domain
[ 5.633450] intel_rng: FWH not detected
[ 5.748644] cfg80211: World regulatory domain updated:
[ 5.748653] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.748660] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.748667] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.748673] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.748679] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.748686] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.880841] Linux video capture interface: v2.00
[ 6.125252] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 6.154085] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
[ 6.154191] usbcore: registered new interface driver uvcvideo
[ 6.154199] USB Video Class driver (v0.1.0)
[ 6.219225] psmouse serio1: ID: 10 00 64
[ 6.234204] ath5k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.234222] ath5k 0000:01:00.0: setting latency timer to 64
[ 6.234296] ath5k 0000:01:00.0: registered as 'phy0'
[ 6.356109] ath: EEPROM regdomain: 0x60
[ 6.356117] ath: EEPROM indicates we should expect a direct regpair map
[ 6.356125] ath: Country alpha2 being used: 00
[ 6.356129] ath: Regpair used: 0x60
[ 6.397920] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.579330] elantech.c: assuming hardware version 2, firmware version 2.48
[ 6.662486] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 6.913608] phy0: Selected rate control algorithm 'minstrel'
[ 6.915004] Registered led device: ath5k-phy0::rx
[ 6.915041] Registered led device: ath5k-phy0::tx
[ 6.915048] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 6.916927] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[ 7.067367] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.067438] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.330116] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
[ 7.331102] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 7.346906] usb-storage: device scan complete
[ 7.347089] usb-storage: device scan complete
[ 7.347618] scsi 2:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 7.348603] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.349254] scsi 3:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 7.369128] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 7.372483] sd 2:0:0:0: [sdb] 3905314 512-byte logical blocks: (1.99 GB/1.86 GiB)
[ 7.373419] sd 2:0:0:0: [sdb] Write Protect is off
[ 7.373429] sd 2:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 7.373434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.381327] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 7.402447] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.402462] sdb: sdb1
[ 7.417639] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.417652] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 11.969037] alloc irq_desc for 27 on node -1
[ 11.969045] alloc kstat_irqs on node -1
[ 11.969068] atl2 0000:03:00.0: irq 27 for MSI/MSI-X
[ 11.969585] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.015255] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.913612] ppdev: user-space parallel port driver
[ 25.710495] [drm] DAC-6: set mode 640x480 0
[ 25.817107] [drm] DAC-6: set mode 640x480 0
[ 26.211429] i2c-adapter i2c-1: unable to read EDID block.
[ 26.211438] i915 0000:00:02.0: LVDS-1: no EDID data
[ 26.253128] [drm] TV-12: set mode NTSC 480i 0
[ 26.395516] [drm] TV-12: set mode NTSC 480i 0
[ 26.542388] [drm] DAC-6: set mode 640x480 0
[ 26.655055] [drm] DAC-6: set mode 640x480 0
[ 28.679373] i2c-adapter i2c-1: unable to read EDID block.
[ 28.679385] i915 0000:00:02.0: LVDS-1: no EDID data
[ 28.803941] [drm] TV-12: set mode NTSC 480i 0
[ 28.949398] [drm] TV-12: set mode NTSC 480i 0
[ 36.932147] usb 1-4: reset high speed USB device using ehci_hcd and address 3
[ 38.345045] [drm] DAC-6: set mode 640x480 0
[ 38.457351] [drm] DAC-6: set mode 640x480 0
[ 38.530060] i2c-adapter i2c-1: unable to read EDID block.
[ 38.530070] i915 0000:00:02.0: LVDS-1: no EDID data
[ 38.572432] [drm] TV-12: set mode NTSC 480i 0
[ 38.719613] [drm] TV-12: set mode NTSC 480i 0
[ 38.880209] [drm] DAC-6: set mode 640x480 0
[ 38.993671] [drm] DAC-6: set mode 640x480 0
[ 39.066216] i2c-adapter i2c-1: unable to read EDID block.
[ 39.066229] i915 0000:00:02.0: LVDS-1: no EDID data
[ 39.108567] [drm] TV-12: set mode NTSC 480i 0
[ 39.253840] [drm] TV-12: set mode NTSC 480i 0
[ 39.413011] [drm] DAC-6: set mode 640x480 0
[ 39.525111] [drm] DAC-6: set mode 640x480 0
[ 39.593987] i2c-adapter i2c-1: unable to read EDID block.
[ 39.593998] i915 0000:00:02.0: LVDS-1: no EDID data
[ 39.636288] [drm] TV-12: set mode NTSC 480i 0
[ 39.779793] [drm] TV-12: set mode NTSC 480i 0
[ 44.940092] usb 1-4: reset high speed USB device using ehci_hcd and address 3
[ 46.947627] [drm] DAC-6: set mode 640x480 0
[ 47.068848] [drm] DAC-6: set mode 640x480 0
[ 47.133904] i2c-adapter i2c-1: unable to read EDID block.
[ 47.133913] i915 0000:00:02.0: LVDS-1: no EDID data
[ 47.176240] [drm] TV-12: set mode NTSC 480i 0
[ 47.319166] [drm] TV-12: set mode NTSC 480i 0
aaflac@aaflac-laptop ~ $

Once again, thanks for helping!! :D
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Re: Fn F8?

Postby BrianD on Wed Mar 31, 2010 5:42 pm

[ 1.126297] input: Macintosh mouse button emulation as /devices/virtual/input/input4


I could be wrong, and I'm aware that you certainly don't want my opinion, but someone else may come along and point out that the typical, standard Macintosh mouse has but a single button on it.

...and, hopefully that'll happen soon.
need I say more??
BrianD
Level 4
Level 4
 
Posts: 296
Joined: Fri Feb 12, 2010 12:22 am
Location: Tallahassee, Florida, USA

Re: Fn F8?

Postby Canard blanc on Wed Mar 31, 2010 11:16 pm

mick55,

After posting the reports you requested and seeing the Elantech entry for the Touchpad, did some more Googling.

Installed tpconfig:
sudo apt-get install tpconfig

Then ran:
sudo tpconfig -i (last letter is not an L, but the first letter in the word 'input')

Got the following results:
aaflac@aaflac-laptop ~ $ sudo tpconfig -i
[sudo] password for aaflac:
Found Synaptics Touchpad.
Firmware: 8.96 (multiple-byte mode).
Sensor type: unknown (0).
Geometry: rectangular/landscape/up.
Packets: absolute, 80 packets per second.
Corner taps disabled; no tap gestures.
Edge motion: none.
Z threshold: 6 of 7.
2 button mode; corner tap is right button click.
aaflac@aaflac-laptop ~ $


Found a post where it was recommended that one place a finger on the corner of the touchpad surface, and then click on the left button. Did this, and all of a sudden the left button is working as it should!! Also plugged in a USB mouse, and it still works!

Would you believe?? :D

BTW, Fn F8 is not going to toggle the Touchpad on and off. On this particular EeePC it deals with sound off: F8, and sound on: F9. That is fine.
Last edited by Canard blanc on Wed Mar 31, 2010 11:26 pm, edited 1 time in total.
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Re: Fn F8?

Postby mick55 on Wed Mar 31, 2010 11:25 pm

I'm glad you got it sorted. :D
Things are more like they are now than they ever were before.

Dwight D. Eisenhower (1890 - 1969)
User avatar
mick55
Level 7
Level 7
 
Posts: 1507
Joined: Fri Sep 25, 2009 2:47 am

Re: Fn F8?

Postby Canard blanc on Wed Mar 31, 2010 11:41 pm

mick55,

Thanks a bundle for your help!!! :D

Have a great weekend!!
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Re: Touchpad left-click not working on EeePC 900

Postby fbsduser on Thu Apr 01, 2010 12:18 am

The "macintosh mouse" thing is actually the software that allows you to emulate the middle mouse button using the left and right ones. Despite the name. This software works in all the platforms linux supports.
fbsduser
Level 1
Level 1
 
Posts: 19
Joined: Thu Apr 01, 2010 12:11 am

Re: Touchpad left-click not working on EeePC 900

Postby Canard blanc on Thu Apr 01, 2010 12:35 am

Thanks for the info, fbsduser!

It did not seem to be the problem, but I am no expert. :mrgreen:

Would the 'middle mouse button', using the left and right Touchpad buttons, allow scrolling, perhaps?
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Re: Touchpad left-click not working on EeePC 900

Postby Canard blanc on Thu Apr 01, 2010 12:51 am

Now you have me thinking...

How would one configure the middle mouse button?
It could probably do more than scroll. :wink:
Canard blanc
Level 1
Level 1
 
Posts: 32
Joined: Wed Jun 03, 2009 11:17 pm
Location: USA

Linux Mint is funded by ads and donations.
 

Return to Hardware Support

Who is online

Users browsing this forum: No registered users and 8 guests