Here it goes:
aaflac@aaflac-laptop ~ $
xinput list
"Virtual core pointer" id=0 [XPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 0
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 0
"Virtual core keyboard" id=1 [XKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"AT Translated Set 2 keyboard" id=2 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Video Bus" id=3 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Power Button" id=4 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Asus EeePC extra buttons" id=5 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Power Button" id=6 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Sleep Button" id=7 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"CNF7129" id=8 [XExtensionKeyboard]
Type is KEYBOARD
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"ETPS/2 Elantech Touchpad" id=9 [XExtensionPointer]
Type is TOUCHPAD
Num_buttons is 12
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is 8
Max_value is 1144
Resolution is 1
Axis 1 :
Min_value is 8
Max_value is 760
Resolution is 1 "Macintosh mouse button emulation" id=10 [XExtensionPointer]
Type is MOUSE
Num_buttons is 5
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
"Microsoft Compact Optical Mouse 500" id=11 [XExtensionPointer]
Type is MOUSE
Num_buttons is 7
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
dmesg:
(>>Elantech is there @ [6.579330] and[ 6.662486]<<)
[ 0.128428] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.128435] pci 0000:00:1b.0: PME# disabled
[ 0.128516] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.128523] pci 0000:00:1c.0: PME# disabled
[ 0.128603] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.128611] pci 0000:00:1c.1: PME# disabled
[ 0.128696] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.128704] pci 0000:00:1c.2: PME# disabled
[ 0.128769] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.128835] pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
[ 0.128900] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
[ 0.128965] pci 0000:00:1d.3: reg 20 io port: [0xe880-0xe89f]
[ 0.129035] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
[ 0.129100] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.129108] pci 0000:00:1d.7: PME# disabled
[ 0.129250] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.129262] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.129270] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.129277] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0380-03ff
[ 0.129325] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.129336] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.129346] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.129356] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.129367] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[ 0.129401] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.129408] pci 0000:00:1f.2: PME# disabled
[ 0.129466] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.129621] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.129662] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbfa0000-0xfbfbffff]
[ 0.129708] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.129717] pci 0000:03:00.0: PME# disabled
[ 0.129783] pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.129856] pci 0000:01:00.0: reg 10 64bit mmio: [0xfbef0000-0xfbefffff]
[ 0.130002] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[ 0.130013] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.130076] pci 0000:00:1e.0: transparent bridge
[ 0.130111] pci_bus 0000:00: on NUMA node 0
[ 0.130125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.130440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.130551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.130651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.139361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.139614] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.139854] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.140114] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.140356] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.140598] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.140841] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.141086] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.141511] SCSI subsystem initialized
[ 0.141637] libata version 3.00 loaded.
[ 0.141807] usbcore: registered new interface driver usbfs
[ 0.141850] usbcore: registered new interface driver hub
[ 0.141905] usbcore: registered new device driver usb
[ 0.142176] ACPI: WMI: Mapper loaded
[ 0.142181] PCI: Using ACPI for IRQ routing
[ 0.142516] Bluetooth: Core ver 2.15
[ 0.142590] NET: Registered protocol family 31
[ 0.142594] Bluetooth: HCI device and connection manager initialized
[ 0.142600] Bluetooth: HCI socket layer initialized
[ 0.142605] NetLabel: Initializing
[ 0.142609] NetLabel: domain hash size = 128
[ 0.142612] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.142639] NetLabel: unlabeled traffic allowed by default
[ 0.142949] hpet clockevent registered
[ 0.142955] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.142964] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.142976] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.151556] pnp: PnP ACPI init
[ 0.151602] ACPI: bus type pnp registered
[ 0.155424] pnp: PnP ACPI: found 13 devices
[ 0.155431] ACPI: ACPI bus type pnp unregistered
[ 0.155439] PnPBIOS: Disabled by ACPI PNP
[ 0.155467] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.155487] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.155494] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.155501] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.155508] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.155515] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.155523] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.155531] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.155543] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.155550] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.155562] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.155574] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.155586] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.155593] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.155600] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.190456] AppArmor: AppArmor Filesystem Enabled
[ 0.190533] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.190539] pci 0000:00:1c.0: IO window: disabled
[ 0.190548] pci 0000:00:1c.0: MEM window: disabled
[ 0.190555] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.190564] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.190570] pci 0000:00:1c.1: IO window: disabled
[ 0.190580] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
[ 0.190588] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.190597] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[ 0.190602] pci 0000:00:1c.2: IO window: disabled
[ 0.190612] pci 0000:00:1c.2: MEM window: 0xf8000000-0xfbefffff
[ 0.190621] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.190634] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.190639] pci 0000:00:1e.0: IO window: disabled
[ 0.190648] pci 0000:00:1e.0: MEM window: disabled
[ 0.190655] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.190678] alloc irq_desc for 16 on node -1
[ 0.190682] alloc kstat_irqs on node -1
[ 0.190695] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.190704] pci 0000:00:1c.0: setting latency timer to 64
[ 0.190715] alloc irq_desc for 17 on node -1
[ 0.190719] alloc kstat_irqs on node -1
[ 0.190727] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.190734] pci 0000:00:1c.1: setting latency timer to 64
[ 0.190745] alloc irq_desc for 18 on node -1
[ 0.190749] alloc kstat_irqs on node -1
[ 0.190757] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.190764] pci 0000:00:1c.2: setting latency timer to 64
[ 0.190775] pci 0000:00:1e.0: setting latency timer to 64
[ 0.190784] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.190791] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.190798] pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.190805] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
[ 0.190811] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.190818] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.190824] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.190899] NET: Registered protocol family 2
[ 0.191086] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.191726] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.193392] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.194291] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.194298] TCP reno registered
[ 0.194513] NET: Registered protocol family 1
[ 0.194646] Trying to unpack rootfs image as initramfs...
[ 0.644023] Switched to high resolution mode on CPU 0
[ 0.689811] Freeing initrd memory: 8039k freed
[ 0.699656] cpufreq-nforce2: No nForce2 chipset.
[ 0.699720] Scanning for low memory corruption every 60 seconds
[ 0.699950] audit: initializing netlink socket (disabled)
[ 0.700071] type=2000 audit(1270021698.700:1): initialized
[ 0.719758] highmem bounce pool size: 64 pages
[ 0.719770] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.722800] VFS: Disk quotas dquot_6.5.2
[ 0.722927] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.724440] fuse init (API version 7.12)
[ 0.724636] msgmni has been set to 1736
[ 0.725077] alg: No test for stdrng (krng)
[ 0.725106] io scheduler noop registered
[ 0.725111] io scheduler anticipatory registered
[ 0.725116] io scheduler deadline registered
[ 0.725219] io scheduler cfq registered (default)
[ 0.725246] pci 0000:00:02.0: Boot video device
[ 0.725545] alloc irq_desc for 24 on node -1
[ 0.725551] alloc kstat_irqs on node -1
[ 0.725570] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.725584] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.725766] alloc irq_desc for 25 on node -1
[ 0.725770] alloc kstat_irqs on node -1
[ 0.725782] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.725794] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.725975] alloc irq_desc for 26 on node -1
[ 0.725980] alloc kstat_irqs on node -1
[ 0.725991] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.726003] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.726158] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.726381] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.726695] ACPI: AC Adapter [AC0] (off-line)
[ 0.726834] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.726842] ACPI: Power Button [PWRF]
[ 0.726959] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.728146] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.737621] ACPI: Lid Switch [LID]
[ 0.737726] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.737732] ACPI: Sleep Button [SLPB]
[ 0.737838] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.737844] ACPI: Power Button [PWRB]
[ 0.738932] Marking TSC unstable due to TSC halts in idle
[ 0.738974] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.739028] processor LNXCPU:00: registered as cooling_device0
[ 0.739036] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.757992] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.758012] ACPI: Thermal Zone [TZ00] (27 C)
[ 0.758119] isapnp: Scanning for PnP cards...
[ 1.119671] isapnp: No Plug & Play device found
[ 1.122146] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.125066] brd: module loaded
[ 1.126125] loop: module loaded
[ 1.126297] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.126466] ahci 0000:00:1f.2: version 3.0
[ 1.126493] alloc irq_desc for 19 on node -1
[ 1.126498] alloc kstat_irqs on node -1
[ 1.126511] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.126535] ahci 0000:00:1f.2: PCI INT B disabled
[ 1.126546] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.126626] ata_piix 0000:00:1f.2: version 2.13
[ 1.126641] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.126651] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.126721] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.126870] scsi0 : ata_piix
[ 1.127140] scsi1 : ata_piix
[ 1.130559] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.130567] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.132602] Fixed MDIO Bus: probed
[ 1.132679] PPP generic driver version 2.4.2
[ 1.132901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.132948] alloc irq_desc for 23 on node -1
[ 1.132953] alloc kstat_irqs on node -1
[ 1.132968] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.132995] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.133002] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.133114] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.137092] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.137102] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.137335] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 1.152069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.152275] usb usb1: configuration #1 chosen from 1 choice
[ 1.152338] hub 1-0:1.0: USB hub found
[ 1.152356] hub 1-0:1.0: 8 ports detected
[ 1.152513] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.152555] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.152630] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.152646] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.152653] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.152736] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.152774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 1.152942] usb usb2: configuration #1 chosen from 1 choice
[ 1.153007] hub 2-0:1.0: USB hub found
[ 1.153022] hub 2-0:1.0: 2 ports detected
[ 1.153115] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.153129] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.153136] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.153213] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.153261] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 1.153425] usb usb3: configuration #1 chosen from 1 choice
[ 1.153483] hub 3-0:1.0: USB hub found
[ 1.153497] hub 3-0:1.0: 2 ports detected
[ 1.153581] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.153593] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.153600] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.153738] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.153785] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 1.153962] usb usb4: configuration #1 chosen from 1 choice
[ 1.154018] hub 4-0:1.0: USB hub found
[ 1.154032] hub 4-0:1.0: 2 ports detected
[ 1.154116] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.154129] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.154136] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.154215] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.154261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 1.154430] usb usb5: configuration #1 chosen from 1 choice
[ 1.154489] hub 5-0:1.0: USB hub found
[ 1.154503] hub 5-0:1.0: 2 ports detected
[ 1.154703] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.191539] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.191551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.191682] mice: PS/2 mouse device common for all mice
[ 1.191948] rtc_cmos 00:03: RTC can wake from S4
[ 1.193748] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.193784] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.194021] device-mapper: uevent: version 1.0.3
[ 1.194302] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
[ 1.194414] device-mapper: multipath: version 1.1.0 loaded
[ 1.194420] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.194707] EISA: Probing bus 0 at eisa.0
[ 1.194752] EISA: Detected 0 cards.
[ 1.194934] cpuidle: using governor ladder
[ 1.195066] cpuidle: using governor menu
[ 1.196104] TCP cubic registered
[ 1.196450] NET: Registered protocol family 10
[ 1.197413] lo: Disabled Privacy Extensions
[ 1.198045] NET: Registered protocol family 17
[ 1.198089] Bluetooth: L2CAP ver 2.13
[ 1.198093] Bluetooth: L2CAP socket layer initialized
[ 1.198099] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.198103] Bluetooth: SCO socket layer initialized
[ 1.198176] Bluetooth: RFCOMM TTY layer initialized
[ 1.198183] Bluetooth: RFCOMM socket layer initialized
[ 1.198187] Bluetooth: RFCOMM ver 1.11
[ 1.198243] Using IPI No-Shortcut mode
[ 1.198391] PM: Resume from disk failed.
[ 1.198419] registered taskstats version 1
[ 1.198612] Magic number: 2:838:825
[ 1.198745] rtc_cmos 00:03: setting system clock to 2010-03-31 07:48:19 UTC (1270021699)
[ 1.198753] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.198757] EDD information not available.
[ 1.235467] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.315463] ata2.00: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 1.315471] ata2.00: 31522176 sectors, multi 0: LBA
[ 1.320276] ata2.00: configured for UDMA/66
[ 1.587657] ACPI: Battery Slot [BAT0] (battery present)
[ 1.587938] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5
[ 1.588222] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.588308] sd 1:0:0:0: [sda] 31522176 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 1.588407] sd 1:0:0:0: [sda] Write Protect is off
[ 1.588414] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.588466] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.588737] sda: sda1 sda2 < sda5 >
[ 1.591206] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.591241] Freeing unused kernel memory: 544k freed
[ 1.591818] Write protecting the kernel text: 4592k
[ 1.591959] Write protecting the kernel read-only data: 1836k
[ 1.624080] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.640017] Clocksource tsc unstable (delta = -83559401 ns)
[ 1.783203] usb 1-4: configuration #1 chosen from 1 choice
[ 1.900911] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 1.957916] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input6
[ 1.958001] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.034632] Linux agpgart interface v0.103
[ 2.140875] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 2.141215] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 2.146607] usb 1-5: configuration #1 chosen from 1 choice
[ 2.153142] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.261287] usb 1-8: new high speed USB device using ehci_hcd and address 5
[ 2.263825] [drm] Initialized drm 1.1.0 20060810
[ 2.295679] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.295690] i915 0000:00:02.0: setting latency timer to 64
[ 2.320725] i2c-adapter i2c-1: unable to read EDID block.
[ 2.320736] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2.322558] Initializing USB Mass Storage driver...
[ 2.322760] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.323043] scsi3 : SCSI emulation for USB Mass Storage devices
[ 2.323186] usbcore: registered new interface driver usb-storage
[ 2.323194] USB Mass Storage support registered.
[ 2.337180] usb-storage: device found at 4
[ 2.337187] usb-storage: waiting for device to settle before scanning
[ 2.337207] usb-storage: device found at 3
[ 2.337211] usb-storage: waiting for device to settle before scanning
[ 2.616810] [drm] DAC-6: set mode 640x480 0
[ 2.707414] i2c-adapter i2c-1: unable to read EDID block.
[ 2.707426] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2.748339] [drm] TV-12: set mode NTSC 480i 0
[ 2.876637] [drm] fb0: inteldrmfb frame buffer device
[ 2.876656] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.892795] usb 1-8: configuration #1 chosen from 1 choice
[ 2.954351] render error detected, EIR: 0x00000010
[ 2.954356] page table error
[ 2.954360] PGTBL_ER: 0x00000100
[ 2.954366] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 2.954379] render error detected, EIR: 0x00000010
[ 2.954383] page table error
[ 2.954385] PGTBL_ER: 0x00000100
[ 2.973012] [drm] LVDS-8: set mode 1024x600 16
[ 3.042619] Console: switching to colour frame buffer device 128x37
[ 3.232028] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 3.305805] xor: automatically using best checksumming function: pIII_sse
[ 3.324010] pIII_sse : 2339.000 MB/sec
[ 3.324016] xor: using function: pIII_sse (2339.000 MB/sec)
[ 3.331374] device-mapper: dm-raid45: initialized v0.2594b
[ 3.426485] usb 3-1: configuration #1 chosen from 1 choice
[ 3.464456] usbcore: registered new interface driver hiddev
[ 3.488900] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[ 3.489074] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.1-1/input0
[ 3.489111] usbcore: registered new interface driver usbhid
[ 3.489118] usbhid: v2.6:USB HID core driver
[ 3.718087] PM: Starting manual resume from disk
[ 3.718098] PM: Resume from partition 8:5
[ 3.718103] PM: Checking hibernation image.
[ 3.718648] PM: Resume from disk failed.
[ 3.727189] EXT4-fs (sda1): barriers enabled
[ 3.730651] kjournald2 starting: pid 371, dev sda1:8, commit interval 5 seconds
[ 3.730677] EXT4-fs (sda1): delayed allocation enabled
[ 3.730684] EXT4-fs: file extents enabled
[ 3.733781] EXT4-fs: mballoc enabled
[ 3.733812] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.361521] Adding 706820k swap on /dev/sda5. Priority:-1 extents:1 across:706820k
[ 4.512701] udev: starting version 147
[ 4.589422] lp: driver loaded but no devices found
[ 4.773128] eeepc_laptop: Eee PC Hotkey Driver
[ 4.774595] EXT4-fs (sda1): internal journal on sda1:8
[ 4.918171] eeepc_laptop: Hotkey init flags 0x41
[ 4.919460] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 4.919470] eeepc_laptop: Get control methods supported: 0x2101711
[ 4.919607] input: Asus EeePC extra buttons as /devices/virtual/input/input8
[ 5.414588] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 5.414596] Copyright (c) 2007 Atheros Corporation.
[ 5.414675] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.414692] atl2 0000:03:00.0: setting latency timer to 64
[ 5.598257] cfg80211: Calling CRDA to update world regulatory domain
[ 5.633450] intel_rng: FWH not detected
[ 5.748644] cfg80211: World regulatory domain updated:
[ 5.748653] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.748660] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.748667] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.748673] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.748679] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.748686] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.880841] Linux video capture interface: v2.00
[ 6.125252] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 6.154085] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
[ 6.154191] usbcore: registered new interface driver uvcvideo
[ 6.154199] USB Video Class driver (v0.1.0)
[ 6.219225] psmouse serio1: ID: 10 00 64
[ 6.234204] ath5k 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.234222] ath5k 0000:01:00.0: setting latency timer to 64
[ 6.234296] ath5k 0000:01:00.0: registered as 'phy0'
[ 6.356109] ath: EEPROM regdomain: 0x60
[ 6.356117] ath: EEPROM indicates we should expect a direct regpair map
[ 6.356125] ath: Country alpha2 being used: 00
[ 6.356129] ath: Regpair used: 0x60
[ 6.397920] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.579330] elantech.c: assuming hardware version 2, firmware version 2.48
[ 6.662486] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 6.913608] phy0: Selected rate control algorithm 'minstrel'
[ 6.915004] Registered led device: ath5k-phy0::rx
[ 6.915041] Registered led device: ath5k-phy0::tx
[ 6.915048] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 6.916927] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[ 7.067367] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.067438] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.330116] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
[ 7.331102] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 7.346906] usb-storage: device scan complete
[ 7.347089] usb-storage: device scan complete
[ 7.347618] scsi 2:0:0:0: Direct-Access Kingston DT 101 II 1.00 PQ: 0 ANSI: 2
[ 7.348603] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.349254] scsi 3:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 7.369128] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 7.372483] sd 2:0:0:0: [sdb] 3905314 512-byte logical blocks: (1.99 GB/1.86 GiB)
[ 7.373419] sd 2:0:0:0: [sdb] Write Protect is off
[ 7.373429] sd 2:0:0:0: [sdb] Mode Sense: 16 25 09 51
[ 7.373434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.381327] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 7.402447] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.402462] sdb: sdb1
[ 7.417639] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 7.417652] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 11.969037] alloc irq_desc for 27 on node -1
[ 11.969045] alloc kstat_irqs on node -1
[ 11.969068] atl2 0000:03:00.0: irq 27 for MSI/MSI-X
[ 11.969585] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.015255] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.913612] ppdev: user-space parallel port driver
[ 25.710495] [drm] DAC-6: set mode 640x480 0
[ 25.817107] [drm] DAC-6: set mode 640x480 0
[ 26.211429] i2c-adapter i2c-1: unable to read EDID block.
[ 26.211438] i915 0000:00:02.0: LVDS-1: no EDID data
[ 26.253128] [drm] TV-12: set mode NTSC 480i 0
[ 26.395516] [drm] TV-12: set mode NTSC 480i 0
[ 26.542388] [drm] DAC-6: set mode 640x480 0
[ 26.655055] [drm] DAC-6: set mode 640x480 0
[ 28.679373] i2c-adapter i2c-1: unable to read EDID block.
[ 28.679385] i915 0000:00:02.0: LVDS-1: no EDID data
[ 28.803941] [drm] TV-12: set mode NTSC 480i 0
[ 28.949398] [drm] TV-12: set mode NTSC 480i 0
[ 36.932147] usb 1-4: reset high speed USB device using ehci_hcd and address 3
[ 38.345045] [drm] DAC-6: set mode 640x480 0
[ 38.457351] [drm] DAC-6: set mode 640x480 0
[ 38.530060] i2c-adapter i2c-1: unable to read EDID block.
[ 38.530070] i915 0000:00:02.0: LVDS-1: no EDID data
[ 38.572432] [drm] TV-12: set mode NTSC 480i 0
[ 38.719613] [drm] TV-12: set mode NTSC 480i 0
[ 38.880209] [drm] DAC-6: set mode 640x480 0
[ 38.993671] [drm] DAC-6: set mode 640x480 0
[ 39.066216] i2c-adapter i2c-1: unable to read EDID block.
[ 39.066229] i915 0000:00:02.0: LVDS-1: no EDID data
[ 39.108567] [drm] TV-12: set mode NTSC 480i 0
[ 39.253840] [drm] TV-12: set mode NTSC 480i 0
[ 39.413011] [drm] DAC-6: set mode 640x480 0
[ 39.525111] [drm] DAC-6: set mode 640x480 0
[ 39.593987] i2c-adapter i2c-1: unable to read EDID block.
[ 39.593998] i915 0000:00:02.0: LVDS-1: no EDID data
[ 39.636288] [drm] TV-12: set mode NTSC 480i 0
[ 39.779793] [drm] TV-12: set mode NTSC 480i 0
[ 44.940092] usb 1-4: reset high speed USB device using ehci_hcd and address 3
[ 46.947627] [drm] DAC-6: set mode 640x480 0
[ 47.068848] [drm] DAC-6: set mode 640x480 0
[ 47.133904] i2c-adapter i2c-1: unable to read EDID block.
[ 47.133913] i915 0000:00:02.0: LVDS-1: no EDID data
[ 47.176240] [drm] TV-12: set mode NTSC 480i 0
[ 47.319166] [drm] TV-12: set mode NTSC 480i 0
aaflac@aaflac-laptop ~ $
Once again, thanks for helping!!