I recently installed LInux Mint 10 on my ASUS laptop and everything works great, except the fact that in Skype my camera is upside down, and on other programs it does not exist.
I went by the terminal commands but it did not help.
I have some info so if anyone can help, I would really appreciate it, since I am a first time user. The commands I used from different links made my system crash so I am afraid to do it again.
Thanks
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg | grep uvc
[ 15.060136] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 15.083850] usbcore: registered new interface driver uvcvideo
modinfo uvcvideo
filename: /lib/modules/2.6.35-22-generic-pae/kernel/drivers/media/video/uvc/uvcvideo.ko
version: v0.1.0
license: GPL
description: USB Video Class driver
author: Laurent Pinchart <laurent.pinchart@skynet.be>
srcversion: 652EE9BEA312A154E061B94
alias: usb:v*p*d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v1C4Fp3000d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v1B3Bp2951d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v19ABp1000d00*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v19ABp1000d01[0-1]*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v19ABp1000d012[0-6]dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v18ECp3290d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v18ECp3288d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v18CDpCAFEd*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v1871p0306d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v17EFp480Bd*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v174Fp8A34d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v174Fp8A33d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v174Fp8A31d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v174Fp8A12d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v174Fp5931d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v174Fp5212d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v0E8Dp0004d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v0AC8p3420d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v0AC8p3410d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v0AC8p332Dd*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v05E3p0505d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v05ACp8501d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v058Fp3820d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v046Dp08C7d*dc*dsc*dp*icFFisc01ip00*
alias: usb:v046Dp08C6d*dc*dsc*dp*icFFisc01ip00*
alias: usb:v046Dp08C5d*dc*dsc*dp*icFFisc01ip00*
alias: usb:v046Dp08C3d*dc*dsc*dp*icFFisc01ip00*
alias: usb:v046Dp08C2d*dc*dsc*dp*icFFisc01ip00*
alias: usb:v046Dp08C1d*dc*dsc*dp*icFFisc01ip00*
alias: usb:v045Ep0723d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v045Ep00F8d*dc*dsc*dp*ic0Eisc01ip00*
alias: usb:v0458p706Ed*dc*dsc*dp*ic0Eisc01ip00*
depends: videodev,v4l1-compat
vermagic: 2.6.35-22-generic-pae SMP mod_unload modversions 686
parm: clock:Video buffers timestamp clock
parm: nodrop:Don't drop incomplete frames (uint)
parm: quirks:Forced device quirks (uint)
parm: trace:Trace level bitmask (uint)
parm: timeout:Streaming control requests timeout (uint)
Upside Down Camera Linux Mint on ASUS K70I0
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
-
angelus
Upside Down Camera Linux Mint on ASUS K70I0
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
-
lepadatu.lucian
Re: Upside Down Camera Linux Mint on ASUS K70I0
This is an old issue and has been dealt with by a software developer from fedora: Hans De Goede. You can use this step by step instructions from here:
http://www.mail-archive.com/linux-uvc-d ... 05057.html.
I noticed that the link from where you can download the library is broken so try this http://jwrdegoede.fedorapeople.org/v4l- ... st.tar.bz2.
If you have any difficulties post back and we'll see what can be done.
http://www.mail-archive.com/linux-uvc-d ... 05057.html.
I noticed that the link from where you can download the library is broken so try this http://jwrdegoede.fedorapeople.org/v4l- ... st.tar.bz2.
If you have any difficulties post back and we'll see what can be done.
-
angelus
Re: Upside Down Camera Linux Mint on ASUS K70I0
Thanks for your reply. I managed to locate my camera and it functions normally on Cheese but on Skype the picture is still upside down and on pidgin msn there is no option for a video or audio.
I did the gstreamer-properties and got this :
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'sunaudiosink'
gstreamer-properties-Message: Skipping unavailable plugin 'glimagesink'
gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
gstreamer-properties-Message: Skipping unavailable plugin 'sunaudiosrc'
Besides that, a window pops out with multimedia system selector and even after I test it I have no result on pidgin and skype. In addition, when I choose to use the webcam on fb or any other page it does not show it...
I did the gstreamer-properties and got this :
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'sunaudiosink'
gstreamer-properties-Message: Skipping unavailable plugin 'glimagesink'
gstreamer-properties-Message: Skipping unavailable plugin 'sdlvideosink'
gstreamer-properties-Message: Skipping unavailable plugin 'v4lmjpegsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'qcamsrc'
gstreamer-properties-Message: Skipping unavailable plugin 'esdmon'
gstreamer-properties-Message: Skipping unavailable plugin 'sunaudiosrc'
Besides that, a window pops out with multimedia system selector and even after I test it I have no result on pidgin and skype. In addition, when I choose to use the webcam on fb or any other page it does not show it...
-
angelus
Re: Upside Down Camera Linux Mint on ASUS K70I0
And I did this to try to unplug it but nothing...
$ modprobe snd_usb_audio
WARNING: Error inserting snd_hwdep (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-hwdep.ko): Operation not permitted
WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-page-alloc.ko): Operation not permitted
WARNING: Error inserting snd_timer (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-timer.ko): Operation not permitted
WARNING: Error inserting snd_pcm (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-pcm.ko): Operation not permitted
FATAL: Error inserting snd_usb_audio (/lib/modules/2.6.35-22-generic-pae/kernel/sound/usb/snd-usb-audio.ko): Operation not permitted
Also I did this : dmesg
[ 0.363070] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.363711] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.364352] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.364994] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.365639] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.366289] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.367033] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.367677] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
[ 0.368329] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[ 0.368971] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[ 0.369605] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.370240] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.370884] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[ 0.371533] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[ 0.372186] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.372826] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.372964] HEST: Table is not found!
[ 0.373125] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.373132] vgaarb: loaded
[ 0.373406] SCSI subsystem initialized
[ 0.373545] libata version 3.00 loaded.
[ 0.373632] usbcore: registered new interface driver usbfs
[ 0.373654] usbcore: registered new interface driver hub
[ 0.373694] usbcore: registered new device driver usb
[ 0.373983] ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
[ 0.374813] ACPI: WMI: Mapper loaded
[ 0.374817] PCI: Using ACPI for IRQ routing
[ 0.374826] PCI: pci_cache_line_size set to 64 bytes
[ 0.374989] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.374995] reserve RAM buffer: 00000000dffa8000 - 00000000dfffffff
[ 0.375155] NetLabel: Initializing
[ 0.375159] NetLabel: domain hash size = 128
[ 0.375161] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.375182] NetLabel: unlabeled traffic allowed by default
[ 0.375237] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.375247] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.375257] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.384046] Switching to clocksource tsc
[ 0.402807] AppArmor: AppArmor Filesystem Enabled
[ 0.402832] pnp: PnP ACPI init
[ 0.402862] ACPI: bus type pnp registered
[ 0.417644] pnp: PnP ACPI: found 13 devices
[ 0.417650] ACPI: ACPI bus type pnp unregistered
[ 0.417656] PnPBIOS: Disabled by ACPI PNP
[ 0.417691] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.417697] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.417703] system 00:06: [io 0x4000-0x407f] has been reserved
[ 0.417708] system 00:06: [io 0x4080-0x40ff] has been reserved
[ 0.417713] system 00:06: [io 0x4400-0x447f] has been reserved
[ 0.417718] system 00:06: [io 0x4480-0x44ff] has been reserved
[ 0.417722] system 00:06: [io 0x4800-0x487f] has been reserved
[ 0.417727] system 00:06: [io 0x4880-0x48ff] has been reserved
[ 0.417734] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.417739] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.417744] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.417750] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.417756] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.417761] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.417774] system 00:09: [io 0x0250-0x0253] has been reserved
[ 0.417779] system 00:09: [io 0x0256-0x025f] has been reserved
[ 0.417784] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.417790] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.417800] system 00:0a: [io 0x5000-0x507f] has been reserved
[ 0.417805] system 00:0a: [io 0x5080-0x50ff] has been reserved
[ 0.417815] system 00:0b: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.417825] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.417831] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.417836] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.417841] system 00:0c: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.417847] system 00:0c: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.455055] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.455061] pci 0000:00:09.0: bridge window [io disabled]
[ 0.455068] pci 0000:00:09.0: bridge window [mem disabled]
[ 0.455073] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.455082] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.455090] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.455104] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.455115] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.455132] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.455139] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.455153] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.455162] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.455179] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.455182] pci 0000:00:16.0: bridge window [io disabled]
[ 0.455195] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.455205] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.455231] pci 0000:00:09.0: setting latency timer to 64
[ 0.456194] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.456202] alloc irq_desc for 23 on node -1
[ 0.456206] alloc kstat_irqs on node -1
[ 0.456219] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.456230] pci 0000:00:0c.0: setting latency timer to 64
[ 0.457106] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.457112] alloc irq_desc for 22 on node -1
[ 0.457115] alloc kstat_irqs on node -1
[ 0.457124] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.457136] pci 0000:00:15.0: setting latency timer to 64
[ 0.458008] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.458014] alloc irq_desc for 21 on node -1
[ 0.458017] alloc kstat_irqs on node -1
[ 0.458025] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.458037] pci 0000:00:16.0: setting latency timer to 64
[ 0.458048] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.458052] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.458057] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458061] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458066] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458070] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458075] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.458079] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.458083] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458087] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458091] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458095] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458100] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.458104] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.458109] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.458114] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.458118] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.458122] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.458188] NET: Registered protocol family 2
[ 0.458316] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.458714] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.459379] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.459866] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.459872] TCP reno registered
[ 0.459880] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.459896] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.460080] NET: Registered protocol family 1
[ 0.528096] pci 0000:02:00.0: Boot video device
[ 0.528118] PCI: CLS 64 bytes, default 64
[ 0.528163] Simple Boot Flag at 0xef set to 0x1
[ 0.528477] cpufreq-nforce2: No nForce2 chipset.
[ 0.528524] Scanning for low memory corruption every 60 seconds
[ 0.528701] audit: initializing netlink socket (disabled)
[ 0.528718] type=2000 audit(1295980358.524:1): initialized
[ 0.548107] highmem bounce pool size: 64 pages
[ 0.548116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.550611] VFS: Disk quotas dquot_6.5.2
[ 0.550723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.551764] fuse init (API version 7.14)
[ 0.551929] msgmni has been set to 1615
[ 0.552381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.552387] io scheduler noop registered
[ 0.552390] io scheduler deadline registered
[ 0.552414] io scheduler cfq registered (default)
[ 0.552617] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.552747] alloc irq_desc for 40 on node -1
[ 0.552751] alloc kstat_irqs on node -1
[ 0.552778] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
[ 0.552970] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.553097] alloc irq_desc for 41 on node -1
[ 0.553100] alloc kstat_irqs on node -1
[ 0.553122] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 0.553301] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.553428] alloc irq_desc for 42 on node -1
[ 0.553431] alloc kstat_irqs on node -1
[ 0.553453] pcieport 0000:00:16.0: irq 42 for MSI/MSI-X
[ 0.553650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.553688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.553860] intel_idle: MWAIT substates: 0x2220
[ 0.553864] intel_idle: does not run on family 6 model 23
[ 0.554257] ACPI: AC Adapter [AC0] (off-line)
[ 0.554427] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.554437] ACPI: Power Button [PWRB]
[ 0.554517] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.554524] ACPI: Sleep Button [SLPB]
[ 0.554602] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.696044] ACPI: Lid Switch [LID]
[ 0.696164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.696173] ACPI: Power Button [PWRF]
[ 0.697032] ACPI: acpi_idle registered with cpuidle
[ 0.698104] Monitor-Mwait will be used to enter C-1 state
[ 0.698159] Monitor-Mwait will be used to enter C-2 state
[ 0.698198] Monitor-Mwait will be used to enter C-3 state
[ 0.698208] Marking TSC unstable due to TSC halts in idle
[ 0.698388] Switching to clocksource hpet
[ 0.736775] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059)
[ 0.736793] ACPI: Expecting a [Reference] package element, found type C
[ 0.736797] ACPI: Invalid passive threshold
[ 0.738778] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.738795] ACPI: Thermal Zone [THRM] (51 C)
[ 0.739012] ERST: Table is not found!
[ 0.739584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.742258] brd: module loaded
[ 0.743222] loop: module loaded
[ 0.744139] Fixed MDIO Bus: probed
[ 0.744196] PPP generic driver version 2.4.2
[ 0.744257] tun: Universal TUN/TAP device driver, 1.6
[ 0.744260] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.744410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.746457] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 0.746466] alloc irq_desc for 20 on node -1
[ 0.746470] alloc kstat_irqs on node -1
[ 0.746482] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 0.746507] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.746513] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.746599] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.746641] ehci_hcd 0000:00:04.1: debug port 1
[ 0.746658] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.746771] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf7f7ec00
[ 0.746821] isapnp: Scanning for PnP cards...
[ 0.795909] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.796158] hub 1-0:1.0: USB hub found
[ 0.796167] hub 1-0:1.0: 11 ports detected
[ 0.797231] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23
[ 0.797240] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
[ 0.797275] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.797280] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.797355] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.797394] ehci_hcd 0000:00:06.1: debug port 1
[ 0.797411] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 0.797442] ehci_hcd 0000:00:06.1: irq 23, io mem 0xf7f7e800
[ 0.841086] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.841333] hub 2-0:1.0: USB hub found
[ 0.841342] hub 2-0:1.0: 5 ports detected
[ 0.841469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.842415] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 0.842424] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 0.842456] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.842461] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.842540] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.842583] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf7f7f000
[ 0.883705] ACPI: Battery Slot [BAT0] (battery present)
[ 0.932065] hub 3-0:1.0: USB hub found
[ 0.932077] hub 3-0:1.0: 11 ports detected
[ 0.933140] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.933149] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 0.933181] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.933186] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.933276] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.933315] ohci_hcd 0000:00:06.0: irq 21, io mem 0xf7f7d000
[ 0.945745] Freeing initrd memory: 15808k freed
[ 0.990779] hub 4-0:1.0: USB hub found
[ 0.990790] hub 4-0:1.0: 5 ports detected
[ 0.990908] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.991100] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.994907] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.997180] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.997191] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.997236] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.997275] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.997317] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.997497] mice: PS/2 mouse device common for all mice
[ 0.997778] rtc_cmos 00:08: RTC can wake from S4
[ 0.997842] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.997897] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.998077] device-mapper: uevent: version 1.0.3
[ 0.998257] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.998364] device-mapper: multipath: version 1.1.1 loaded
[ 0.998369] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.998561] EISA: Probing bus 0 at eisa.0
[ 0.998566] EISA: Cannot allocate resource for mainboard
[ 0.998570] Cannot allocate resource for EISA slot 1
[ 0.998573] Cannot allocate resource for EISA slot 2
[ 0.998577] Cannot allocate resource for EISA slot 3
[ 0.998580] Cannot allocate resource for EISA slot 4
[ 0.998583] Cannot allocate resource for EISA slot 5
[ 0.998586] Cannot allocate resource for EISA slot 6
[ 0.998590] Cannot allocate resource for EISA slot 7
[ 0.998593] Cannot allocate resource for EISA slot 8
[ 0.998596] EISA: Detected 0 cards.
[ 0.998819] cpuidle: using governor ladder
[ 0.999003] cpuidle: using governor menu
[ 0.999542] TCP cubic registered
[ 0.999767] NET: Registered protocol family 10
[ 1.000406] lo: Disabled Privacy Extensions
[ 1.000838] NET: Registered protocol family 17
[ 1.002641] Using IPI No-Shortcut mode
[ 1.002734] PM: Resume from disk failed.
[ 1.002745] registered taskstats version 1
[ 1.003120] Magic number: 11:235:545
[ 1.003259] rtc_cmos 00:08: setting system clock to 2011-01-25 18:32:39 UTC (1295980359)
[ 1.003262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.003264] EDD information not available.
[ 1.035124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.109573] isapnp: No Plug & Play device found
[ 1.109605] Freeing unused kernel memory: 704k freed
[ 1.110013] Write protecting the kernel text: 5088k
[ 1.110117] Write protecting the kernel read-only data: 2012k
[ 1.131959] udev[85]: starting version 163
[ 1.144558] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.262272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.262922] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 1.262930] alloc irq_desc for 19 on node -1
[ 1.262932] alloc kstat_irqs on node -1
[ 1.262942] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[ 1.262998] r8169 0000:03:00.0: setting latency timer to 64
[ 1.263052] alloc irq_desc for 43 on node -1
[ 1.263055] alloc kstat_irqs on node -1
[ 1.263069] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.263671] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf848e000, 00:26:18:9f:db:0f, XID 18000000 IRQ 43
[ 1.272212] ahci 0000:00:0b.0: version 3.0
[ 1.328643] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 1.328652] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.328715] alloc irq_desc for 44 on node -1
[ 1.328718] alloc kstat_irqs on node -1
[ 1.328729] ahci 0000:00:0b.0: irq 44 for MSI/MSI-X
[ 1.328737] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.328811] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.328815] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[ 1.328820] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.346289] acpi device:2b: registered as cooling_device2
[ 1.346462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input5
[ 1.346518] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.351188] scsi0 : ahci
[ 1.356273] scsi1 : ahci
[ 1.356414] scsi2 : ahci
[ 1.356496] scsi3 : ahci
[ 1.356609] scsi4 : ahci
[ 1.356699] scsi5 : ahci
[ 1.356942] ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 44
[ 1.356945] ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 44
[ 1.356948] ata3: DUMMY
[ 1.356949] ata4: DUMMY
[ 1.356951] ata5: DUMMY
[ 1.356953] ata6: DUMMY
[ 1.676083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.676096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.690204] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[ 1.690229] ata2.00: applying bridge limits
[ 1.703611] ata2.00: configured for UDMA/100
[ 1.728475] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.728480] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.730620] ata1.00: configured for UDMA/133
[ 1.730819] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 1.731013] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.731152] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.731204] sd 0:0:0:0: [sda] Write Protect is off
[ 1.731208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.731230] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.731381] sda:
[ 1.733482] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
[ 1.740820] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.740826] Uniform CD-ROM driver Revision: 3.20
[ 1.741007] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.741078] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.742063] sda1 sda2 < sda5 >
[ 1.788493] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.273408] Btrfs loaded
[ 2.279626] xor: automatically using best checksumming function: pIII_sse
[ 2.296008] pIII_sse : 7625.000 MB/sec
[ 2.296011] xor: using function: pIII_sse (7625.000 MB/sec)
[ 2.298772] device-mapper: dm-raid45: initialized v0.2594b
[ 2.583864] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.583869] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.407350] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 3.407361] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704706
[ 3.407428] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704685
[ 3.407447] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5767205
[ 3.407464] EXT4-fs (sda1): 3 orphan inodes deleted
[ 3.407467] EXT4-fs (sda1): recovery complete
[ 3.801368] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.193024] udev[499]: starting version 163
[ 14.322726] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 14.322734] ACPI: resource nForce2_smbus [io 0x4e00-0x4e3f] conflicts with ACPI region SM00 [??? 0x00004e00-0x00004e3f flags 0x30]
[ 14.322737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.335626] Adding 9936892k swap on /dev/sda5. Priority:-1 extents:1 across:9936892k
[ 14.419318] lp: driver loaded but no devices found
[ 14.420413] Linux video capture interface: v2.00
[ 14.498795] Linux agpgart interface v0.103
[ 14.501868] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 14.510107] cfg80211: Calling CRDA to update world regulatory domain
[ 14.543113] asus_laptop: Asus Laptop Support version 0.42
[ 14.556097] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input6
[ 14.556165] usbcore: registered new interface driver uvcvideo
[ 14.556167] USB Video Class driver (v0.1.0)
[ 14.704988] asus_laptop: BSTS called, 0xff5f returned
[ 14.705056] asus_laptop: K70IO model detected
[ 14.705796] asus_laptop: Backlight controlled by ACPI video driver
[ 14.705854] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
[ 14.720284] cfg80211: World regulatory domain updated:
[ 14.720288] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.720291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720294] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720297] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720300] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720303] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720648] Registered led device: asus::mail
[ 14.720727] Registered led device: asus::touchpad
[ 14.765762] psmouse serio4: ID: 10 00 64
[ 14.806314] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[ 14.806322] alloc irq_desc for 18 on node -1
[ 14.806324] alloc kstat_irqs on node -1
[ 14.806333] ath9k 0000:04:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
[ 14.806344] ath9k 0000:04:00.0: setting latency timer to 64
[ 14.862832] ath: EEPROM regdomain: 0x60
[ 14.862835] ath: EEPROM indicates we should expect a direct regpair map
[ 14.862839] ath: Country alpha2 being used: 00
[ 14.862841] ath: Regpair used: 0x60
[ 14.871895] elantech: assuming hardware version 2, firmware version 4.1.1
[ 14.879079] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 14.879800] Registered led device: ath9k-phy0::radio
[ 14.879819] Registered led device: ath9k-phy0::assoc
[ 14.879838] Registered led device: ath9k-phy0::tx
[ 14.879857] Registered led device: ath9k-phy0::rx
[ 14.879866] phy0: Atheros AR9285 Rev:2 mem=0xf8580000, irq=18
[ 14.886214] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886279] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886838] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 14.886844] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[ 14.886848] hda_intel: Disable MSI for Nvidia chipset
[ 14.886890] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 14.908006] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 15.003559] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[ 15.038117] nvidia: module license 'NVIDIA' taints kernel.
[ 15.038126] Disabling lock debugging due to kernel taint
[ 16.104047] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.389041] r8169 0000:03:00.0: eth0: link down
[ 16.389251] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.439638] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.544072] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 17.037019] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 22
[ 17.037026] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 22 (level, low) -> IRQ 22
[ 17.037642] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 17
[ 17.037648] alloc irq_desc for 17 on node -1
[ 17.037651] alloc kstat_irqs on node -1
[ 17.037660] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[ 17.037676] nvidia 0000:02:00.0: setting latency timer to 64
[ 17.037689] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.038018] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 17.122008] ppdev: user-space parallel port driver
[ 18.394654] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 25.145933] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 67.395113] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 818.667868] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 818.864080] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 819.064081] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 819.264111] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 830.545878] r8169 0000:03:00.0: eth0: link up
[ 830.546188] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 830.612074] r8169 0000:03:00.0: eth0: link down
[ 832.454264] r8169 0000:03:00.0: eth0: link up
[ 839.395319] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 841.256056] eth0: no IPv6 routers present
[ 841.867943] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 842.064100] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 842.264097] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 842.464598] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 859.011821] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 1)
[ 859.208116] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 2)
[ 859.408111] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 3)
[ 859.608059] wlan0: authentication with 00:0b:6b:db:2d:c6 timed out
[ 876.179359] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 876.376047] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 876.576064] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 876.776075] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 885.334258] NET: Registered protocol family 24
[ 892.301793] lo: Disabled Privacy Extensions
[ 944.953636] r8169 0000:03:00.0: eth0: link down
[ 951.932546] r8169 0000:03:00.0: eth0: link up
[ 2045.420079] CE: hpet increased min_delta_ns to 7500 nsec
[ 2045.420213] CE: hpet increased min_delta_ns to 11250 nsec
$ modprobe snd_usb_audio
WARNING: Error inserting snd_hwdep (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-hwdep.ko): Operation not permitted
WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-page-alloc.ko): Operation not permitted
WARNING: Error inserting snd_timer (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-timer.ko): Operation not permitted
WARNING: Error inserting snd_pcm (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-pcm.ko): Operation not permitted
FATAL: Error inserting snd_usb_audio (/lib/modules/2.6.35-22-generic-pae/kernel/sound/usb/snd-usb-audio.ko): Operation not permitted
Also I did this : dmesg
[ 0.363070] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.363711] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.364352] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.364994] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.365639] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.366289] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.367033] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.367677] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
[ 0.368329] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[ 0.368971] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[ 0.369605] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.370240] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.370884] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[ 0.371533] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[ 0.372186] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.372826] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.372964] HEST: Table is not found!
[ 0.373125] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.373132] vgaarb: loaded
[ 0.373406] SCSI subsystem initialized
[ 0.373545] libata version 3.00 loaded.
[ 0.373632] usbcore: registered new interface driver usbfs
[ 0.373654] usbcore: registered new interface driver hub
[ 0.373694] usbcore: registered new device driver usb
[ 0.373983] ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
[ 0.374813] ACPI: WMI: Mapper loaded
[ 0.374817] PCI: Using ACPI for IRQ routing
[ 0.374826] PCI: pci_cache_line_size set to 64 bytes
[ 0.374989] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.374995] reserve RAM buffer: 00000000dffa8000 - 00000000dfffffff
[ 0.375155] NetLabel: Initializing
[ 0.375159] NetLabel: domain hash size = 128
[ 0.375161] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.375182] NetLabel: unlabeled traffic allowed by default
[ 0.375237] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.375247] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.375257] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.384046] Switching to clocksource tsc
[ 0.402807] AppArmor: AppArmor Filesystem Enabled
[ 0.402832] pnp: PnP ACPI init
[ 0.402862] ACPI: bus type pnp registered
[ 0.417644] pnp: PnP ACPI: found 13 devices
[ 0.417650] ACPI: ACPI bus type pnp unregistered
[ 0.417656] PnPBIOS: Disabled by ACPI PNP
[ 0.417691] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.417697] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.417703] system 00:06: [io 0x4000-0x407f] has been reserved
[ 0.417708] system 00:06: [io 0x4080-0x40ff] has been reserved
[ 0.417713] system 00:06: [io 0x4400-0x447f] has been reserved
[ 0.417718] system 00:06: [io 0x4480-0x44ff] has been reserved
[ 0.417722] system 00:06: [io 0x4800-0x487f] has been reserved
[ 0.417727] system 00:06: [io 0x4880-0x48ff] has been reserved
[ 0.417734] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.417739] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.417744] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.417750] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.417756] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.417761] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.417774] system 00:09: [io 0x0250-0x0253] has been reserved
[ 0.417779] system 00:09: [io 0x0256-0x025f] has been reserved
[ 0.417784] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.417790] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.417800] system 00:0a: [io 0x5000-0x507f] has been reserved
[ 0.417805] system 00:0a: [io 0x5080-0x50ff] has been reserved
[ 0.417815] system 00:0b: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.417825] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.417831] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.417836] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.417841] system 00:0c: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.417847] system 00:0c: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.455055] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.455061] pci 0000:00:09.0: bridge window [io disabled]
[ 0.455068] pci 0000:00:09.0: bridge window [mem disabled]
[ 0.455073] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.455082] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.455090] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.455104] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.455115] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.455132] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.455139] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.455153] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.455162] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.455179] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.455182] pci 0000:00:16.0: bridge window [io disabled]
[ 0.455195] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.455205] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.455231] pci 0000:00:09.0: setting latency timer to 64
[ 0.456194] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.456202] alloc irq_desc for 23 on node -1
[ 0.456206] alloc kstat_irqs on node -1
[ 0.456219] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.456230] pci 0000:00:0c.0: setting latency timer to 64
[ 0.457106] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.457112] alloc irq_desc for 22 on node -1
[ 0.457115] alloc kstat_irqs on node -1
[ 0.457124] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.457136] pci 0000:00:15.0: setting latency timer to 64
[ 0.458008] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.458014] alloc irq_desc for 21 on node -1
[ 0.458017] alloc kstat_irqs on node -1
[ 0.458025] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.458037] pci 0000:00:16.0: setting latency timer to 64
[ 0.458048] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.458052] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.458057] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458061] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458066] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458070] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458075] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.458079] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.458083] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458087] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458091] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458095] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458100] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.458104] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.458109] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.458114] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.458118] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.458122] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.458188] NET: Registered protocol family 2
[ 0.458316] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.458714] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.459379] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.459866] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.459872] TCP reno registered
[ 0.459880] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.459896] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.460080] NET: Registered protocol family 1
[ 0.528096] pci 0000:02:00.0: Boot video device
[ 0.528118] PCI: CLS 64 bytes, default 64
[ 0.528163] Simple Boot Flag at 0xef set to 0x1
[ 0.528477] cpufreq-nforce2: No nForce2 chipset.
[ 0.528524] Scanning for low memory corruption every 60 seconds
[ 0.528701] audit: initializing netlink socket (disabled)
[ 0.528718] type=2000 audit(1295980358.524:1): initialized
[ 0.548107] highmem bounce pool size: 64 pages
[ 0.548116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.550611] VFS: Disk quotas dquot_6.5.2
[ 0.550723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.551764] fuse init (API version 7.14)
[ 0.551929] msgmni has been set to 1615
[ 0.552381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.552387] io scheduler noop registered
[ 0.552390] io scheduler deadline registered
[ 0.552414] io scheduler cfq registered (default)
[ 0.552617] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.552747] alloc irq_desc for 40 on node -1
[ 0.552751] alloc kstat_irqs on node -1
[ 0.552778] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
[ 0.552970] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.553097] alloc irq_desc for 41 on node -1
[ 0.553100] alloc kstat_irqs on node -1
[ 0.553122] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 0.553301] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.553428] alloc irq_desc for 42 on node -1
[ 0.553431] alloc kstat_irqs on node -1
[ 0.553453] pcieport 0000:00:16.0: irq 42 for MSI/MSI-X
[ 0.553650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.553688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.553860] intel_idle: MWAIT substates: 0x2220
[ 0.553864] intel_idle: does not run on family 6 model 23
[ 0.554257] ACPI: AC Adapter [AC0] (off-line)
[ 0.554427] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.554437] ACPI: Power Button [PWRB]
[ 0.554517] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.554524] ACPI: Sleep Button [SLPB]
[ 0.554602] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.696044] ACPI: Lid Switch [LID]
[ 0.696164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.696173] ACPI: Power Button [PWRF]
[ 0.697032] ACPI: acpi_idle registered with cpuidle
[ 0.698104] Monitor-Mwait will be used to enter C-1 state
[ 0.698159] Monitor-Mwait will be used to enter C-2 state
[ 0.698198] Monitor-Mwait will be used to enter C-3 state
[ 0.698208] Marking TSC unstable due to TSC halts in idle
[ 0.698388] Switching to clocksource hpet
[ 0.736775] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059)
[ 0.736793] ACPI: Expecting a [Reference] package element, found type C
[ 0.736797] ACPI: Invalid passive threshold
[ 0.738778] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.738795] ACPI: Thermal Zone [THRM] (51 C)
[ 0.739012] ERST: Table is not found!
[ 0.739584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.742258] brd: module loaded
[ 0.743222] loop: module loaded
[ 0.744139] Fixed MDIO Bus: probed
[ 0.744196] PPP generic driver version 2.4.2
[ 0.744257] tun: Universal TUN/TAP device driver, 1.6
[ 0.744260] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.744410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.746457] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 0.746466] alloc irq_desc for 20 on node -1
[ 0.746470] alloc kstat_irqs on node -1
[ 0.746482] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 0.746507] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.746513] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.746599] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.746641] ehci_hcd 0000:00:04.1: debug port 1
[ 0.746658] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.746771] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf7f7ec00
[ 0.746821] isapnp: Scanning for PnP cards...
[ 0.795909] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.796158] hub 1-0:1.0: USB hub found
[ 0.796167] hub 1-0:1.0: 11 ports detected
[ 0.797231] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23
[ 0.797240] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
[ 0.797275] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.797280] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.797355] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.797394] ehci_hcd 0000:00:06.1: debug port 1
[ 0.797411] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 0.797442] ehci_hcd 0000:00:06.1: irq 23, io mem 0xf7f7e800
[ 0.841086] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.841333] hub 2-0:1.0: USB hub found
[ 0.841342] hub 2-0:1.0: 5 ports detected
[ 0.841469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.842415] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 0.842424] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 0.842456] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.842461] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.842540] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.842583] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf7f7f000
[ 0.883705] ACPI: Battery Slot [BAT0] (battery present)
[ 0.932065] hub 3-0:1.0: USB hub found
[ 0.932077] hub 3-0:1.0: 11 ports detected
[ 0.933140] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.933149] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 0.933181] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.933186] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.933276] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.933315] ohci_hcd 0000:00:06.0: irq 21, io mem 0xf7f7d000
[ 0.945745] Freeing initrd memory: 15808k freed
[ 0.990779] hub 4-0:1.0: USB hub found
[ 0.990790] hub 4-0:1.0: 5 ports detected
[ 0.990908] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.991100] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.994907] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.997180] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.997191] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.997236] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.997275] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.997317] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.997497] mice: PS/2 mouse device common for all mice
[ 0.997778] rtc_cmos 00:08: RTC can wake from S4
[ 0.997842] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.997897] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.998077] device-mapper: uevent: version 1.0.3
[ 0.998257] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.998364] device-mapper: multipath: version 1.1.1 loaded
[ 0.998369] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.998561] EISA: Probing bus 0 at eisa.0
[ 0.998566] EISA: Cannot allocate resource for mainboard
[ 0.998570] Cannot allocate resource for EISA slot 1
[ 0.998573] Cannot allocate resource for EISA slot 2
[ 0.998577] Cannot allocate resource for EISA slot 3
[ 0.998580] Cannot allocate resource for EISA slot 4
[ 0.998583] Cannot allocate resource for EISA slot 5
[ 0.998586] Cannot allocate resource for EISA slot 6
[ 0.998590] Cannot allocate resource for EISA slot 7
[ 0.998593] Cannot allocate resource for EISA slot 8
[ 0.998596] EISA: Detected 0 cards.
[ 0.998819] cpuidle: using governor ladder
[ 0.999003] cpuidle: using governor menu
[ 0.999542] TCP cubic registered
[ 0.999767] NET: Registered protocol family 10
[ 1.000406] lo: Disabled Privacy Extensions
[ 1.000838] NET: Registered protocol family 17
[ 1.002641] Using IPI No-Shortcut mode
[ 1.002734] PM: Resume from disk failed.
[ 1.002745] registered taskstats version 1
[ 1.003120] Magic number: 11:235:545
[ 1.003259] rtc_cmos 00:08: setting system clock to 2011-01-25 18:32:39 UTC (1295980359)
[ 1.003262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.003264] EDD information not available.
[ 1.035124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.109573] isapnp: No Plug & Play device found
[ 1.109605] Freeing unused kernel memory: 704k freed
[ 1.110013] Write protecting the kernel text: 5088k
[ 1.110117] Write protecting the kernel read-only data: 2012k
[ 1.131959] udev[85]: starting version 163
[ 1.144558] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.262272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.262922] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 1.262930] alloc irq_desc for 19 on node -1
[ 1.262932] alloc kstat_irqs on node -1
[ 1.262942] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[ 1.262998] r8169 0000:03:00.0: setting latency timer to 64
[ 1.263052] alloc irq_desc for 43 on node -1
[ 1.263055] alloc kstat_irqs on node -1
[ 1.263069] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.263671] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf848e000, 00:26:18:9f:db:0f, XID 18000000 IRQ 43
[ 1.272212] ahci 0000:00:0b.0: version 3.0
[ 1.328643] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 1.328652] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.328715] alloc irq_desc for 44 on node -1
[ 1.328718] alloc kstat_irqs on node -1
[ 1.328729] ahci 0000:00:0b.0: irq 44 for MSI/MSI-X
[ 1.328737] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.328811] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.328815] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[ 1.328820] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.346289] acpi device:2b: registered as cooling_device2
[ 1.346462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input5
[ 1.346518] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.351188] scsi0 : ahci
[ 1.356273] scsi1 : ahci
[ 1.356414] scsi2 : ahci
[ 1.356496] scsi3 : ahci
[ 1.356609] scsi4 : ahci
[ 1.356699] scsi5 : ahci
[ 1.356942] ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 44
[ 1.356945] ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 44
[ 1.356948] ata3: DUMMY
[ 1.356949] ata4: DUMMY
[ 1.356951] ata5: DUMMY
[ 1.356953] ata6: DUMMY
[ 1.676083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.676096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.690204] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[ 1.690229] ata2.00: applying bridge limits
[ 1.703611] ata2.00: configured for UDMA/100
[ 1.728475] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.728480] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.730620] ata1.00: configured for UDMA/133
[ 1.730819] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 1.731013] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.731152] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.731204] sd 0:0:0:0: [sda] Write Protect is off
[ 1.731208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.731230] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.731381] sda:
[ 1.733482] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
[ 1.740820] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.740826] Uniform CD-ROM driver Revision: 3.20
[ 1.741007] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.741078] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.742063] sda1 sda2 < sda5 >
[ 1.788493] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.273408] Btrfs loaded
[ 2.279626] xor: automatically using best checksumming function: pIII_sse
[ 2.296008] pIII_sse : 7625.000 MB/sec
[ 2.296011] xor: using function: pIII_sse (7625.000 MB/sec)
[ 2.298772] device-mapper: dm-raid45: initialized v0.2594b
[ 2.583864] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.583869] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.407350] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 3.407361] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704706
[ 3.407428] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704685
[ 3.407447] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5767205
[ 3.407464] EXT4-fs (sda1): 3 orphan inodes deleted
[ 3.407467] EXT4-fs (sda1): recovery complete
[ 3.801368] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.193024] udev[499]: starting version 163
[ 14.322726] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 14.322734] ACPI: resource nForce2_smbus [io 0x4e00-0x4e3f] conflicts with ACPI region SM00 [??? 0x00004e00-0x00004e3f flags 0x30]
[ 14.322737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.335626] Adding 9936892k swap on /dev/sda5. Priority:-1 extents:1 across:9936892k
[ 14.419318] lp: driver loaded but no devices found
[ 14.420413] Linux video capture interface: v2.00
[ 14.498795] Linux agpgart interface v0.103
[ 14.501868] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 14.510107] cfg80211: Calling CRDA to update world regulatory domain
[ 14.543113] asus_laptop: Asus Laptop Support version 0.42
[ 14.556097] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input6
[ 14.556165] usbcore: registered new interface driver uvcvideo
[ 14.556167] USB Video Class driver (v0.1.0)
[ 14.704988] asus_laptop: BSTS called, 0xff5f returned
[ 14.705056] asus_laptop: K70IO model detected
[ 14.705796] asus_laptop: Backlight controlled by ACPI video driver
[ 14.705854] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
[ 14.720284] cfg80211: World regulatory domain updated:
[ 14.720288] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.720291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720294] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720297] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720300] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720303] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720648] Registered led device: asus::mail
[ 14.720727] Registered led device: asus::touchpad
[ 14.765762] psmouse serio4: ID: 10 00 64
[ 14.806314] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[ 14.806322] alloc irq_desc for 18 on node -1
[ 14.806324] alloc kstat_irqs on node -1
[ 14.806333] ath9k 0000:04:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
[ 14.806344] ath9k 0000:04:00.0: setting latency timer to 64
[ 14.862832] ath: EEPROM regdomain: 0x60
[ 14.862835] ath: EEPROM indicates we should expect a direct regpair map
[ 14.862839] ath: Country alpha2 being used: 00
[ 14.862841] ath: Regpair used: 0x60
[ 14.871895] elantech: assuming hardware version 2, firmware version 4.1.1
[ 14.879079] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 14.879800] Registered led device: ath9k-phy0::radio
[ 14.879819] Registered led device: ath9k-phy0::assoc
[ 14.879838] Registered led device: ath9k-phy0::tx
[ 14.879857] Registered led device: ath9k-phy0::rx
[ 14.879866] phy0: Atheros AR9285 Rev:2 mem=0xf8580000, irq=18
[ 14.886214] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886279] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886838] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 14.886844] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[ 14.886848] hda_intel: Disable MSI for Nvidia chipset
[ 14.886890] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 14.908006] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 15.003559] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[ 15.038117] nvidia: module license 'NVIDIA' taints kernel.
[ 15.038126] Disabling lock debugging due to kernel taint
[ 16.104047] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.389041] r8169 0000:03:00.0: eth0: link down
[ 16.389251] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.439638] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.544072] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 17.037019] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 22
[ 17.037026] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 22 (level, low) -> IRQ 22
[ 17.037642] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 17
[ 17.037648] alloc irq_desc for 17 on node -1
[ 17.037651] alloc kstat_irqs on node -1
[ 17.037660] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[ 17.037676] nvidia 0000:02:00.0: setting latency timer to 64
[ 17.037689] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.038018] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 17.122008] ppdev: user-space parallel port driver
[ 18.394654] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 25.145933] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 67.395113] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 818.667868] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 818.864080] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 819.064081] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 819.264111] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 830.545878] r8169 0000:03:00.0: eth0: link up
[ 830.546188] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 830.612074] r8169 0000:03:00.0: eth0: link down
[ 832.454264] r8169 0000:03:00.0: eth0: link up
[ 839.395319] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 841.256056] eth0: no IPv6 routers present
[ 841.867943] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 842.064100] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 842.264097] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 842.464598] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 859.011821] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 1)
[ 859.208116] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 2)
[ 859.408111] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 3)
[ 859.608059] wlan0: authentication with 00:0b:6b:db:2d:c6 timed out
[ 876.179359] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 876.376047] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 876.576064] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 876.776075] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 885.334258] NET: Registered protocol family 24
[ 892.301793] lo: Disabled Privacy Extensions
[ 944.953636] r8169 0000:03:00.0: eth0: link down
[ 951.932546] r8169 0000:03:00.0: eth0: link up
[ 2045.420079] CE: hpet increased min_delta_ns to 7500 nsec
[ 2045.420213] CE: hpet increased min_delta_ns to 11250 nsec
-
angelus
Re: Upside Down Camera Linux Mint on ASUS K70I0
And I did this to try to unplug it but nothing...
$ modprobe snd_usb_audio
WARNING: Error inserting snd_hwdep (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-hwdep.ko): Operation not permitted
WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-page-alloc.ko): Operation not permitted
WARNING: Error inserting snd_timer (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-timer.ko): Operation not permitted
WARNING: Error inserting snd_pcm (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-pcm.ko): Operation not permitted
FATAL: Error inserting snd_usb_audio (/lib/modules/2.6.35-22-generic-pae/kernel/sound/usb/snd-usb-audio.ko): Operation not permitted
Also I did this : dmesg
[ 0.363070] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.363711] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.364352] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.364994] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.365639] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.366289] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.367033] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.367677] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
[ 0.368329] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[ 0.368971] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[ 0.369605] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.370240] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.370884] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[ 0.371533] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[ 0.372186] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.372826] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.372964] HEST: Table is not found!
[ 0.373125] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.373132] vgaarb: loaded
[ 0.373406] SCSI subsystem initialized
[ 0.373545] libata version 3.00 loaded.
[ 0.373632] usbcore: registered new interface driver usbfs
[ 0.373654] usbcore: registered new interface driver hub
[ 0.373694] usbcore: registered new device driver usb
[ 0.373983] ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
[ 0.374813] ACPI: WMI: Mapper loaded
[ 0.374817] PCI: Using ACPI for IRQ routing
[ 0.374826] PCI: pci_cache_line_size set to 64 bytes
[ 0.374989] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.374995] reserve RAM buffer: 00000000dffa8000 - 00000000dfffffff
[ 0.375155] NetLabel: Initializing
[ 0.375159] NetLabel: domain hash size = 128
[ 0.375161] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.375182] NetLabel: unlabeled traffic allowed by default
[ 0.375237] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.375247] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.375257] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.384046] Switching to clocksource tsc
[ 0.402807] AppArmor: AppArmor Filesystem Enabled
[ 0.402832] pnp: PnP ACPI init
[ 0.402862] ACPI: bus type pnp registered
[ 0.417644] pnp: PnP ACPI: found 13 devices
[ 0.417650] ACPI: ACPI bus type pnp unregistered
[ 0.417656] PnPBIOS: Disabled by ACPI PNP
[ 0.417691] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.417697] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.417703] system 00:06: [io 0x4000-0x407f] has been reserved
[ 0.417708] system 00:06: [io 0x4080-0x40ff] has been reserved
[ 0.417713] system 00:06: [io 0x4400-0x447f] has been reserved
[ 0.417718] system 00:06: [io 0x4480-0x44ff] has been reserved
[ 0.417722] system 00:06: [io 0x4800-0x487f] has been reserved
[ 0.417727] system 00:06: [io 0x4880-0x48ff] has been reserved
[ 0.417734] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.417739] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.417744] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.417750] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.417756] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.417761] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.417774] system 00:09: [io 0x0250-0x0253] has been reserved
[ 0.417779] system 00:09: [io 0x0256-0x025f] has been reserved
[ 0.417784] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.417790] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.417800] system 00:0a: [io 0x5000-0x507f] has been reserved
[ 0.417805] system 00:0a: [io 0x5080-0x50ff] has been reserved
[ 0.417815] system 00:0b: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.417825] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.417831] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.417836] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.417841] system 00:0c: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.417847] system 00:0c: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.455055] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.455061] pci 0000:00:09.0: bridge window [io disabled]
[ 0.455068] pci 0000:00:09.0: bridge window [mem disabled]
[ 0.455073] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.455082] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.455090] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.455104] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.455115] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.455132] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.455139] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.455153] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.455162] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.455179] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.455182] pci 0000:00:16.0: bridge window [io disabled]
[ 0.455195] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.455205] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.455231] pci 0000:00:09.0: setting latency timer to 64
[ 0.456194] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.456202] alloc irq_desc for 23 on node -1
[ 0.456206] alloc kstat_irqs on node -1
[ 0.456219] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.456230] pci 0000:00:0c.0: setting latency timer to 64
[ 0.457106] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.457112] alloc irq_desc for 22 on node -1
[ 0.457115] alloc kstat_irqs on node -1
[ 0.457124] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.457136] pci 0000:00:15.0: setting latency timer to 64
[ 0.458008] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.458014] alloc irq_desc for 21 on node -1
[ 0.458017] alloc kstat_irqs on node -1
[ 0.458025] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.458037] pci 0000:00:16.0: setting latency timer to 64
[ 0.458048] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.458052] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.458057] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458061] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458066] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458070] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458075] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.458079] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.458083] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458087] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458091] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458095] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458100] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.458104] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.458109] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.458114] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.458118] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.458122] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.458188] NET: Registered protocol family 2
[ 0.458316] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.458714] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.459379] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.459866] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.459872] TCP reno registered
[ 0.459880] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.459896] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.460080] NET: Registered protocol family 1
[ 0.528096] pci 0000:02:00.0: Boot video device
[ 0.528118] PCI: CLS 64 bytes, default 64
[ 0.528163] Simple Boot Flag at 0xef set to 0x1
[ 0.528477] cpufreq-nforce2: No nForce2 chipset.
[ 0.528524] Scanning for low memory corruption every 60 seconds
[ 0.528701] audit: initializing netlink socket (disabled)
[ 0.528718] type=2000 audit(1295980358.524:1): initialized
[ 0.548107] highmem bounce pool size: 64 pages
[ 0.548116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.550611] VFS: Disk quotas dquot_6.5.2
[ 0.550723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.551764] fuse init (API version 7.14)
[ 0.551929] msgmni has been set to 1615
[ 0.552381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.552387] io scheduler noop registered
[ 0.552390] io scheduler deadline registered
[ 0.552414] io scheduler cfq registered (default)
[ 0.552617] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.552747] alloc irq_desc for 40 on node -1
[ 0.552751] alloc kstat_irqs on node -1
[ 0.552778] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
[ 0.552970] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.553097] alloc irq_desc for 41 on node -1
[ 0.553100] alloc kstat_irqs on node -1
[ 0.553122] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 0.553301] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.553428] alloc irq_desc for 42 on node -1
[ 0.553431] alloc kstat_irqs on node -1
[ 0.553453] pcieport 0000:00:16.0: irq 42 for MSI/MSI-X
[ 0.553650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.553688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.553860] intel_idle: MWAIT substates: 0x2220
[ 0.553864] intel_idle: does not run on family 6 model 23
[ 0.554257] ACPI: AC Adapter [AC0] (off-line)
[ 0.554427] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.554437] ACPI: Power Button [PWRB]
[ 0.554517] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.554524] ACPI: Sleep Button [SLPB]
[ 0.554602] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.696044] ACPI: Lid Switch [LID]
[ 0.696164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.696173] ACPI: Power Button [PWRF]
[ 0.697032] ACPI: acpi_idle registered with cpuidle
[ 0.698104] Monitor-Mwait will be used to enter C-1 state
[ 0.698159] Monitor-Mwait will be used to enter C-2 state
[ 0.698198] Monitor-Mwait will be used to enter C-3 state
[ 0.698208] Marking TSC unstable due to TSC halts in idle
[ 0.698388] Switching to clocksource hpet
[ 0.736775] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059)
[ 0.736793] ACPI: Expecting a [Reference] package element, found type C
[ 0.736797] ACPI: Invalid passive threshold
[ 0.738778] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.738795] ACPI: Thermal Zone [THRM] (51 C)
[ 0.739012] ERST: Table is not found!
[ 0.739584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.742258] brd: module loaded
[ 0.743222] loop: module loaded
[ 0.744139] Fixed MDIO Bus: probed
[ 0.744196] PPP generic driver version 2.4.2
[ 0.744257] tun: Universal TUN/TAP device driver, 1.6
[ 0.744260] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.744410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.746457] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 0.746466] alloc irq_desc for 20 on node -1
[ 0.746470] alloc kstat_irqs on node -1
[ 0.746482] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 0.746507] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.746513] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.746599] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.746641] ehci_hcd 0000:00:04.1: debug port 1
[ 0.746658] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.746771] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf7f7ec00
[ 0.746821] isapnp: Scanning for PnP cards...
[ 0.795909] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.796158] hub 1-0:1.0: USB hub found
[ 0.796167] hub 1-0:1.0: 11 ports detected
[ 0.797231] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23
[ 0.797240] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
[ 0.797275] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.797280] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.797355] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.797394] ehci_hcd 0000:00:06.1: debug port 1
[ 0.797411] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 0.797442] ehci_hcd 0000:00:06.1: irq 23, io mem 0xf7f7e800
[ 0.841086] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.841333] hub 2-0:1.0: USB hub found
[ 0.841342] hub 2-0:1.0: 5 ports detected
[ 0.841469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.842415] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 0.842424] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 0.842456] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.842461] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.842540] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.842583] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf7f7f000
[ 0.883705] ACPI: Battery Slot [BAT0] (battery present)
[ 0.932065] hub 3-0:1.0: USB hub found
[ 0.932077] hub 3-0:1.0: 11 ports detected
[ 0.933140] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.933149] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 0.933181] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.933186] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.933276] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.933315] ohci_hcd 0000:00:06.0: irq 21, io mem 0xf7f7d000
[ 0.945745] Freeing initrd memory: 15808k freed
[ 0.990779] hub 4-0:1.0: USB hub found
[ 0.990790] hub 4-0:1.0: 5 ports detected
[ 0.990908] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.991100] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.994907] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.997180] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.997191] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.997236] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.997275] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.997317] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.997497] mice: PS/2 mouse device common for all mice
[ 0.997778] rtc_cmos 00:08: RTC can wake from S4
[ 0.997842] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.997897] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.998077] device-mapper: uevent: version 1.0.3
[ 0.998257] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.998364] device-mapper: multipath: version 1.1.1 loaded
[ 0.998369] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.998561] EISA: Probing bus 0 at eisa.0
[ 0.998566] EISA: Cannot allocate resource for mainboard
[ 0.998570] Cannot allocate resource for EISA slot 1
[ 0.998573] Cannot allocate resource for EISA slot 2
[ 0.998577] Cannot allocate resource for EISA slot 3
[ 0.998580] Cannot allocate resource for EISA slot 4
[ 0.998583] Cannot allocate resource for EISA slot 5
[ 0.998586] Cannot allocate resource for EISA slot 6
[ 0.998590] Cannot allocate resource for EISA slot 7
[ 0.998593] Cannot allocate resource for EISA slot 8
[ 0.998596] EISA: Detected 0 cards.
[ 0.998819] cpuidle: using governor ladder
[ 0.999003] cpuidle: using governor menu
[ 0.999542] TCP cubic registered
[ 0.999767] NET: Registered protocol family 10
[ 1.000406] lo: Disabled Privacy Extensions
[ 1.000838] NET: Registered protocol family 17
[ 1.002641] Using IPI No-Shortcut mode
[ 1.002734] PM: Resume from disk failed.
[ 1.002745] registered taskstats version 1
[ 1.003120] Magic number: 11:235:545
[ 1.003259] rtc_cmos 00:08: setting system clock to 2011-01-25 18:32:39 UTC (1295980359)
[ 1.003262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.003264] EDD information not available.
[ 1.035124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.109573] isapnp: No Plug & Play device found
[ 1.109605] Freeing unused kernel memory: 704k freed
[ 1.110013] Write protecting the kernel text: 5088k
[ 1.110117] Write protecting the kernel read-only data: 2012k
[ 1.131959] udev[85]: starting version 163
[ 1.144558] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.262272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.262922] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 1.262930] alloc irq_desc for 19 on node -1
[ 1.262932] alloc kstat_irqs on node -1
[ 1.262942] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[ 1.262998] r8169 0000:03:00.0: setting latency timer to 64
[ 1.263052] alloc irq_desc for 43 on node -1
[ 1.263055] alloc kstat_irqs on node -1
[ 1.263069] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.263671] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf848e000, 00:26:18:9f:db:0f, XID 18000000 IRQ 43
[ 1.272212] ahci 0000:00:0b.0: version 3.0
[ 1.328643] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 1.328652] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.328715] alloc irq_desc for 44 on node -1
[ 1.328718] alloc kstat_irqs on node -1
[ 1.328729] ahci 0000:00:0b.0: irq 44 for MSI/MSI-X
[ 1.328737] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.328811] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.328815] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[ 1.328820] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.346289] acpi device:2b: registered as cooling_device2
[ 1.346462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input5
[ 1.346518] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.351188] scsi0 : ahci
[ 1.356273] scsi1 : ahci
[ 1.356414] scsi2 : ahci
[ 1.356496] scsi3 : ahci
[ 1.356609] scsi4 : ahci
[ 1.356699] scsi5 : ahci
[ 1.356942] ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 44
[ 1.356945] ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 44
[ 1.356948] ata3: DUMMY
[ 1.356949] ata4: DUMMY
[ 1.356951] ata5: DUMMY
[ 1.356953] ata6: DUMMY
[ 1.676083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.676096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.690204] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[ 1.690229] ata2.00: applying bridge limits
[ 1.703611] ata2.00: configured for UDMA/100
[ 1.728475] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.728480] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.730620] ata1.00: configured for UDMA/133
[ 1.730819] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 1.731013] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.731152] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.731204] sd 0:0:0:0: [sda] Write Protect is off
[ 1.731208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.731230] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.731381] sda:
[ 1.733482] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
[ 1.740820] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.740826] Uniform CD-ROM driver Revision: 3.20
[ 1.741007] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.741078] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.742063] sda1 sda2 < sda5 >
[ 1.788493] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.273408] Btrfs loaded
[ 2.279626] xor: automatically using best checksumming function: pIII_sse
[ 2.296008] pIII_sse : 7625.000 MB/sec
[ 2.296011] xor: using function: pIII_sse (7625.000 MB/sec)
[ 2.298772] device-mapper: dm-raid45: initialized v0.2594b
[ 2.583864] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.583869] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.407350] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 3.407361] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704706
[ 3.407428] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704685
[ 3.407447] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5767205
[ 3.407464] EXT4-fs (sda1): 3 orphan inodes deleted
[ 3.407467] EXT4-fs (sda1): recovery complete
[ 3.801368] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.193024] udev[499]: starting version 163
[ 14.322726] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 14.322734] ACPI: resource nForce2_smbus [io 0x4e00-0x4e3f] conflicts with ACPI region SM00 [??? 0x00004e00-0x00004e3f flags 0x30]
[ 14.322737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.335626] Adding 9936892k swap on /dev/sda5. Priority:-1 extents:1 across:9936892k
[ 14.419318] lp: driver loaded but no devices found
[ 14.420413] Linux video capture interface: v2.00
[ 14.498795] Linux agpgart interface v0.103
[ 14.501868] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 14.510107] cfg80211: Calling CRDA to update world regulatory domain
[ 14.543113] asus_laptop: Asus Laptop Support version 0.42
[ 14.556097] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input6
[ 14.556165] usbcore: registered new interface driver uvcvideo
[ 14.556167] USB Video Class driver (v0.1.0)
[ 14.704988] asus_laptop: BSTS called, 0xff5f returned
[ 14.705056] asus_laptop: K70IO model detected
[ 14.705796] asus_laptop: Backlight controlled by ACPI video driver
[ 14.705854] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
[ 14.720284] cfg80211: World regulatory domain updated:
[ 14.720288] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.720291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720294] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720297] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720300] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720303] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720648] Registered led device: asus::mail
[ 14.720727] Registered led device: asus::touchpad
[ 14.765762] psmouse serio4: ID: 10 00 64
[ 14.806314] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[ 14.806322] alloc irq_desc for 18 on node -1
[ 14.806324] alloc kstat_irqs on node -1
[ 14.806333] ath9k 0000:04:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
[ 14.806344] ath9k 0000:04:00.0: setting latency timer to 64
[ 14.862832] ath: EEPROM regdomain: 0x60
[ 14.862835] ath: EEPROM indicates we should expect a direct regpair map
[ 14.862839] ath: Country alpha2 being used: 00
[ 14.862841] ath: Regpair used: 0x60
[ 14.871895] elantech: assuming hardware version 2, firmware version 4.1.1
[ 14.879079] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 14.879800] Registered led device: ath9k-phy0::radio
[ 14.879819] Registered led device: ath9k-phy0::assoc
[ 14.879838] Registered led device: ath9k-phy0::tx
[ 14.879857] Registered led device: ath9k-phy0::rx
[ 14.879866] phy0: Atheros AR9285 Rev:2 mem=0xf8580000, irq=18
[ 14.886214] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886279] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886838] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 14.886844] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[ 14.886848] hda_intel: Disable MSI for Nvidia chipset
[ 14.886890] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 14.908006] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 15.003559] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[ 15.038117] nvidia: module license 'NVIDIA' taints kernel.
[ 15.038126] Disabling lock debugging due to kernel taint
[ 16.104047] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.389041] r8169 0000:03:00.0: eth0: link down
[ 16.389251] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.439638] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.544072] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 17.037019] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 22
[ 17.037026] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 22 (level, low) -> IRQ 22
[ 17.037642] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 17
[ 17.037648] alloc irq_desc for 17 on node -1
[ 17.037651] alloc kstat_irqs on node -1
[ 17.037660] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[ 17.037676] nvidia 0000:02:00.0: setting latency timer to 64
[ 17.037689] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.038018] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 17.122008] ppdev: user-space parallel port driver
[ 18.394654] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 25.145933] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 67.395113] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 818.667868] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 818.864080] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 819.064081] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 819.264111] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 830.545878] r8169 0000:03:00.0: eth0: link up
[ 830.546188] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 830.612074] r8169 0000:03:00.0: eth0: link down
[ 832.454264] r8169 0000:03:00.0: eth0: link up
[ 839.395319] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 841.256056] eth0: no IPv6 routers present
[ 841.867943] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 842.064100] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 842.264097] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 842.464598] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 859.011821] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 1)
[ 859.208116] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 2)
[ 859.408111] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 3)
[ 859.608059] wlan0: authentication with 00:0b:6b:db:2d:c6 timed out
[ 876.179359] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 876.376047] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 876.576064] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 876.776075] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 885.334258] NET: Registered protocol family 24
[ 892.301793] lo: Disabled Privacy Extensions
[ 944.953636] r8169 0000:03:00.0: eth0: link down
[ 951.932546] r8169 0000:03:00.0: eth0: link up
[ 2045.420079] CE: hpet increased min_delta_ns to 7500 nsec
[ 2045.420213] CE: hpet increased min_delta_ns to 11250 nsec
$ modprobe snd_usb_audio
WARNING: Error inserting snd_hwdep (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-hwdep.ko): Operation not permitted
WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-page-alloc.ko): Operation not permitted
WARNING: Error inserting snd_timer (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-timer.ko): Operation not permitted
WARNING: Error inserting snd_pcm (/lib/modules/2.6.35-22-generic-pae/kernel/sound/core/snd-pcm.ko): Operation not permitted
FATAL: Error inserting snd_usb_audio (/lib/modules/2.6.35-22-generic-pae/kernel/sound/usb/snd-usb-audio.ko): Operation not permitted
Also I did this : dmesg
[ 0.363070] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.363711] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.364352] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.364994] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[ 0.365639] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.366289] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.367033] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.367677] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
[ 0.368329] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
[ 0.368971] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
[ 0.369605] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[ 0.370240] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[ 0.370884] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
[ 0.371533] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
[ 0.372186] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
[ 0.372826] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
[ 0.372964] HEST: Table is not found!
[ 0.373125] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.373132] vgaarb: loaded
[ 0.373406] SCSI subsystem initialized
[ 0.373545] libata version 3.00 loaded.
[ 0.373632] usbcore: registered new interface driver usbfs
[ 0.373654] usbcore: registered new interface driver hub
[ 0.373694] usbcore: registered new device driver usb
[ 0.373983] ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
[ 0.374813] ACPI: WMI: Mapper loaded
[ 0.374817] PCI: Using ACPI for IRQ routing
[ 0.374826] PCI: pci_cache_line_size set to 64 bytes
[ 0.374989] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.374995] reserve RAM buffer: 00000000dffa8000 - 00000000dfffffff
[ 0.375155] NetLabel: Initializing
[ 0.375159] NetLabel: domain hash size = 128
[ 0.375161] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.375182] NetLabel: unlabeled traffic allowed by default
[ 0.375237] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.375247] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.375257] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.384046] Switching to clocksource tsc
[ 0.402807] AppArmor: AppArmor Filesystem Enabled
[ 0.402832] pnp: PnP ACPI init
[ 0.402862] ACPI: bus type pnp registered
[ 0.417644] pnp: PnP ACPI: found 13 devices
[ 0.417650] ACPI: ACPI bus type pnp unregistered
[ 0.417656] PnPBIOS: Disabled by ACPI PNP
[ 0.417691] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.417697] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.417703] system 00:06: [io 0x4000-0x407f] has been reserved
[ 0.417708] system 00:06: [io 0x4080-0x40ff] has been reserved
[ 0.417713] system 00:06: [io 0x4400-0x447f] has been reserved
[ 0.417718] system 00:06: [io 0x4480-0x44ff] has been reserved
[ 0.417722] system 00:06: [io 0x4800-0x487f] has been reserved
[ 0.417727] system 00:06: [io 0x4880-0x48ff] has been reserved
[ 0.417734] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.417739] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.417744] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.417750] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.417756] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.417761] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.417774] system 00:09: [io 0x0250-0x0253] has been reserved
[ 0.417779] system 00:09: [io 0x0256-0x025f] has been reserved
[ 0.417784] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.417790] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.417800] system 00:0a: [io 0x5000-0x507f] has been reserved
[ 0.417805] system 00:0a: [io 0x5080-0x50ff] has been reserved
[ 0.417815] system 00:0b: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.417825] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.417831] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.417836] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.417841] system 00:0c: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.417847] system 00:0c: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.455055] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.455061] pci 0000:00:09.0: bridge window [io disabled]
[ 0.455068] pci 0000:00:09.0: bridge window [mem disabled]
[ 0.455073] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.455082] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.455090] pci 0000:00:0c.0: bridge window [io 0xd000-0xdfff]
[ 0.455104] pci 0000:00:0c.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.455115] pci 0000:00:0c.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.455132] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.455139] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.455153] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.455162] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.455179] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[ 0.455182] pci 0000:00:16.0: bridge window [io disabled]
[ 0.455195] pci 0000:00:16.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.455205] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.455231] pci 0000:00:09.0: setting latency timer to 64
[ 0.456194] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.456202] alloc irq_desc for 23 on node -1
[ 0.456206] alloc kstat_irqs on node -1
[ 0.456219] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.456230] pci 0000:00:0c.0: setting latency timer to 64
[ 0.457106] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.457112] alloc irq_desc for 22 on node -1
[ 0.457115] alloc kstat_irqs on node -1
[ 0.457124] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.457136] pci 0000:00:15.0: setting latency timer to 64
[ 0.458008] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.458014] alloc irq_desc for 21 on node -1
[ 0.458017] alloc kstat_irqs on node -1
[ 0.458025] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.458037] pci 0000:00:16.0: setting latency timer to 64
[ 0.458048] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.458052] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.458057] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458061] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458066] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458070] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458075] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.458079] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.458083] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.458087] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.458091] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xfbffffff]
[ 0.458095] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.458100] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.458104] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.458109] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.458114] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.458118] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.458122] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.458188] NET: Registered protocol family 2
[ 0.458316] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.458714] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.459379] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.459866] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.459872] TCP reno registered
[ 0.459880] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.459896] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.460080] NET: Registered protocol family 1
[ 0.528096] pci 0000:02:00.0: Boot video device
[ 0.528118] PCI: CLS 64 bytes, default 64
[ 0.528163] Simple Boot Flag at 0xef set to 0x1
[ 0.528477] cpufreq-nforce2: No nForce2 chipset.
[ 0.528524] Scanning for low memory corruption every 60 seconds
[ 0.528701] audit: initializing netlink socket (disabled)
[ 0.528718] type=2000 audit(1295980358.524:1): initialized
[ 0.548107] highmem bounce pool size: 64 pages
[ 0.548116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.550611] VFS: Disk quotas dquot_6.5.2
[ 0.550723] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.551764] fuse init (API version 7.14)
[ 0.551929] msgmni has been set to 1615
[ 0.552381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.552387] io scheduler noop registered
[ 0.552390] io scheduler deadline registered
[ 0.552414] io scheduler cfq registered (default)
[ 0.552617] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.552747] alloc irq_desc for 40 on node -1
[ 0.552751] alloc kstat_irqs on node -1
[ 0.552778] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
[ 0.552970] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.553097] alloc irq_desc for 41 on node -1
[ 0.553100] alloc kstat_irqs on node -1
[ 0.553122] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[ 0.553301] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.553428] alloc irq_desc for 42 on node -1
[ 0.553431] alloc kstat_irqs on node -1
[ 0.553453] pcieport 0000:00:16.0: irq 42 for MSI/MSI-X
[ 0.553650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.553688] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.553860] intel_idle: MWAIT substates: 0x2220
[ 0.553864] intel_idle: does not run on family 6 model 23
[ 0.554257] ACPI: AC Adapter [AC0] (off-line)
[ 0.554427] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.554437] ACPI: Power Button [PWRB]
[ 0.554517] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.554524] ACPI: Sleep Button [SLPB]
[ 0.554602] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.696044] ACPI: Lid Switch [LID]
[ 0.696164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.696173] ACPI: Power Button [PWRF]
[ 0.697032] ACPI: acpi_idle registered with cpuidle
[ 0.698104] Monitor-Mwait will be used to enter C-1 state
[ 0.698159] Monitor-Mwait will be used to enter C-2 state
[ 0.698198] Monitor-Mwait will be used to enter C-3 state
[ 0.698208] Marking TSC unstable due to TSC halts in idle
[ 0.698388] Switching to clocksource hpet
[ 0.736775] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20100428/nspredef-1059)
[ 0.736793] ACPI: Expecting a [Reference] package element, found type C
[ 0.736797] ACPI: Invalid passive threshold
[ 0.738778] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.738795] ACPI: Thermal Zone [THRM] (51 C)
[ 0.739012] ERST: Table is not found!
[ 0.739584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.742258] brd: module loaded
[ 0.743222] loop: module loaded
[ 0.744139] Fixed MDIO Bus: probed
[ 0.744196] PPP generic driver version 2.4.2
[ 0.744257] tun: Universal TUN/TAP device driver, 1.6
[ 0.744260] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.744410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.746457] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 0.746466] alloc irq_desc for 20 on node -1
[ 0.746470] alloc kstat_irqs on node -1
[ 0.746482] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 0.746507] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.746513] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.746599] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.746641] ehci_hcd 0000:00:04.1: debug port 1
[ 0.746658] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.746771] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf7f7ec00
[ 0.746821] isapnp: Scanning for PnP cards...
[ 0.795909] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.796158] hub 1-0:1.0: USB hub found
[ 0.796167] hub 1-0:1.0: 11 ports detected
[ 0.797231] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23
[ 0.797240] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
[ 0.797275] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.797280] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.797355] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.797394] ehci_hcd 0000:00:06.1: debug port 1
[ 0.797411] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 0.797442] ehci_hcd 0000:00:06.1: irq 23, io mem 0xf7f7e800
[ 0.841086] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.841333] hub 2-0:1.0: USB hub found
[ 0.841342] hub 2-0:1.0: 5 ports detected
[ 0.841469] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.842415] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 0.842424] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 0.842456] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.842461] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.842540] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.842583] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf7f7f000
[ 0.883705] ACPI: Battery Slot [BAT0] (battery present)
[ 0.932065] hub 3-0:1.0: USB hub found
[ 0.932077] hub 3-0:1.0: 11 ports detected
[ 0.933140] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 0.933149] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
[ 0.933181] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.933186] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.933276] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.933315] ohci_hcd 0000:00:06.0: irq 21, io mem 0xf7f7d000
[ 0.945745] Freeing initrd memory: 15808k freed
[ 0.990779] hub 4-0:1.0: USB hub found
[ 0.990790] hub 4-0:1.0: 5 ports detected
[ 0.990908] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.991100] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.994907] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.997180] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.997191] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.997236] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.997275] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.997317] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.997497] mice: PS/2 mouse device common for all mice
[ 0.997778] rtc_cmos 00:08: RTC can wake from S4
[ 0.997842] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.997897] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.998077] device-mapper: uevent: version 1.0.3
[ 0.998257] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.998364] device-mapper: multipath: version 1.1.1 loaded
[ 0.998369] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.998561] EISA: Probing bus 0 at eisa.0
[ 0.998566] EISA: Cannot allocate resource for mainboard
[ 0.998570] Cannot allocate resource for EISA slot 1
[ 0.998573] Cannot allocate resource for EISA slot 2
[ 0.998577] Cannot allocate resource for EISA slot 3
[ 0.998580] Cannot allocate resource for EISA slot 4
[ 0.998583] Cannot allocate resource for EISA slot 5
[ 0.998586] Cannot allocate resource for EISA slot 6
[ 0.998590] Cannot allocate resource for EISA slot 7
[ 0.998593] Cannot allocate resource for EISA slot 8
[ 0.998596] EISA: Detected 0 cards.
[ 0.998819] cpuidle: using governor ladder
[ 0.999003] cpuidle: using governor menu
[ 0.999542] TCP cubic registered
[ 0.999767] NET: Registered protocol family 10
[ 1.000406] lo: Disabled Privacy Extensions
[ 1.000838] NET: Registered protocol family 17
[ 1.002641] Using IPI No-Shortcut mode
[ 1.002734] PM: Resume from disk failed.
[ 1.002745] registered taskstats version 1
[ 1.003120] Magic number: 11:235:545
[ 1.003259] rtc_cmos 00:08: setting system clock to 2011-01-25 18:32:39 UTC (1295980359)
[ 1.003262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.003264] EDD information not available.
[ 1.035124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.109573] isapnp: No Plug & Play device found
[ 1.109605] Freeing unused kernel memory: 704k freed
[ 1.110013] Write protecting the kernel text: 5088k
[ 1.110117] Write protecting the kernel read-only data: 2012k
[ 1.131959] udev[85]: starting version 163
[ 1.144558] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.262272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.262922] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 1.262930] alloc irq_desc for 19 on node -1
[ 1.262932] alloc kstat_irqs on node -1
[ 1.262942] r8169 0000:03:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[ 1.262998] r8169 0000:03:00.0: setting latency timer to 64
[ 1.263052] alloc irq_desc for 43 on node -1
[ 1.263055] alloc kstat_irqs on node -1
[ 1.263069] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.263671] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf848e000, 00:26:18:9f:db:0f, XID 18000000 IRQ 43
[ 1.272212] ahci 0000:00:0b.0: version 3.0
[ 1.328643] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 1.328652] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 1.328715] alloc irq_desc for 44 on node -1
[ 1.328718] alloc kstat_irqs on node -1
[ 1.328729] ahci 0000:00:0b.0: irq 44 for MSI/MSI-X
[ 1.328737] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.328811] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.328815] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[ 1.328820] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.346289] acpi device:2b: registered as cooling_device2
[ 1.346462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:28/LNXVIDEO:00/input/input5
[ 1.346518] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.351188] scsi0 : ahci
[ 1.356273] scsi1 : ahci
[ 1.356414] scsi2 : ahci
[ 1.356496] scsi3 : ahci
[ 1.356609] scsi4 : ahci
[ 1.356699] scsi5 : ahci
[ 1.356942] ata1: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76100 irq 44
[ 1.356945] ata2: SATA max UDMA/133 abar m8192@0xf7f76000 port 0xf7f76180 irq 44
[ 1.356948] ata3: DUMMY
[ 1.356949] ata4: DUMMY
[ 1.356951] ata5: DUMMY
[ 1.356953] ata6: DUMMY
[ 1.676083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.676096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.690204] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
[ 1.690229] ata2.00: applying bridge limits
[ 1.703611] ata2.00: configured for UDMA/100
[ 1.728475] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.728480] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.730620] ata1.00: configured for UDMA/133
[ 1.730819] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 1.731013] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.731152] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.731204] sd 0:0:0:0: [sda] Write Protect is off
[ 1.731208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.731230] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.731381] sda:
[ 1.733482] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5
[ 1.740820] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.740826] Uniform CD-ROM driver Revision: 3.20
[ 1.741007] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.741078] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.742063] sda1 sda2 < sda5 >
[ 1.788493] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.273408] Btrfs loaded
[ 2.279626] xor: automatically using best checksumming function: pIII_sse
[ 2.296008] pIII_sse : 7625.000 MB/sec
[ 2.296011] xor: using function: pIII_sse (7625.000 MB/sec)
[ 2.298772] device-mapper: dm-raid45: initialized v0.2594b
[ 2.583864] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.583869] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.407350] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 3.407361] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704706
[ 3.407428] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1704685
[ 3.407447] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5767205
[ 3.407464] EXT4-fs (sda1): 3 orphan inodes deleted
[ 3.407467] EXT4-fs (sda1): recovery complete
[ 3.801368] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.193024] udev[499]: starting version 163
[ 14.322726] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 14.322734] ACPI: resource nForce2_smbus [io 0x4e00-0x4e3f] conflicts with ACPI region SM00 [??? 0x00004e00-0x00004e3f flags 0x30]
[ 14.322737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.335626] Adding 9936892k swap on /dev/sda5. Priority:-1 extents:1 across:9936892k
[ 14.419318] lp: driver loaded but no devices found
[ 14.420413] Linux video capture interface: v2.00
[ 14.498795] Linux agpgart interface v0.103
[ 14.501868] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 14.510107] cfg80211: Calling CRDA to update world regulatory domain
[ 14.543113] asus_laptop: Asus Laptop Support version 0.42
[ 14.556097] input: CNF7129 as /devices/pci0000:00/0000:00:04.1/usb1/1-5/1-5:1.0/input/input6
[ 14.556165] usbcore: registered new interface driver uvcvideo
[ 14.556167] USB Video Class driver (v0.1.0)
[ 14.704988] asus_laptop: BSTS called, 0xff5f returned
[ 14.705056] asus_laptop: K70IO model detected
[ 14.705796] asus_laptop: Backlight controlled by ACPI video driver
[ 14.705854] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
[ 14.720284] cfg80211: World regulatory domain updated:
[ 14.720288] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.720291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720294] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720297] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.720300] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720303] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.720648] Registered led device: asus::mail
[ 14.720727] Registered led device: asus::touchpad
[ 14.765762] psmouse serio4: ID: 10 00 64
[ 14.806314] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
[ 14.806322] alloc irq_desc for 18 on node -1
[ 14.806324] alloc kstat_irqs on node -1
[ 14.806333] ath9k 0000:04:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
[ 14.806344] ath9k 0000:04:00.0: setting latency timer to 64
[ 14.862832] ath: EEPROM regdomain: 0x60
[ 14.862835] ath: EEPROM indicates we should expect a direct regpair map
[ 14.862839] ath: Country alpha2 being used: 00
[ 14.862841] ath: Regpair used: 0x60
[ 14.871895] elantech: assuming hardware version 2, firmware version 4.1.1
[ 14.879079] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 14.879800] Registered led device: ath9k-phy0::radio
[ 14.879819] Registered led device: ath9k-phy0::assoc
[ 14.879838] Registered led device: ath9k-phy0::tx
[ 14.879857] Registered led device: ath9k-phy0::rx
[ 14.879866] phy0: Atheros AR9285 Rev:2 mem=0xf8580000, irq=18
[ 14.886214] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886279] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 14.886838] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 14.886844] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[ 14.886848] hda_intel: Disable MSI for Nvidia chipset
[ 14.886890] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 14.908006] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 15.003559] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[ 15.038117] nvidia: module license 'NVIDIA' taints kernel.
[ 15.038126] Disabling lock debugging due to kernel taint
[ 16.104047] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.389041] r8169 0000:03:00.0: eth0: link down
[ 16.389251] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.439638] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.544072] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 17.037019] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 22
[ 17.037026] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 22 (level, low) -> IRQ 22
[ 17.037642] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 17
[ 17.037648] alloc irq_desc for 17 on node -1
[ 17.037651] alloc kstat_irqs on node -1
[ 17.037660] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 17 (level, low) -> IRQ 17
[ 17.037676] nvidia 0000:02:00.0: setting latency timer to 64
[ 17.037689] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.038018] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 17.122008] ppdev: user-space parallel port driver
[ 18.394654] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 25.145933] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[ 67.395113] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 818.667868] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 818.864080] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 819.064081] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 819.264111] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 830.545878] r8169 0000:03:00.0: eth0: link up
[ 830.546188] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 830.612074] r8169 0000:03:00.0: eth0: link down
[ 832.454264] r8169 0000:03:00.0: eth0: link up
[ 839.395319] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 841.256056] eth0: no IPv6 routers present
[ 841.867943] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 842.064100] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 842.264097] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 842.464598] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 859.011821] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 1)
[ 859.208116] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 2)
[ 859.408111] wlan0: authenticate with 00:0b:6b:db:2d:c6 (try 3)
[ 859.608059] wlan0: authentication with 00:0b:6b:db:2d:c6 timed out
[ 876.179359] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 1)
[ 876.376047] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 2)
[ 876.576064] wlan0: direct probe to 00:0b:6b:db:2d:c6 (try 3)
[ 876.776075] wlan0: direct probe to 00:0b:6b:db:2d:c6 timed out
[ 885.334258] NET: Registered protocol family 24
[ 892.301793] lo: Disabled Privacy Extensions
[ 944.953636] r8169 0000:03:00.0: eth0: link down
[ 951.932546] r8169 0000:03:00.0: eth0: link up
[ 2045.420079] CE: hpet increased min_delta_ns to 7500 nsec
[ 2045.420213] CE: hpet increased min_delta_ns to 11250 nsec
-
lepadatu.lucian
Re: Upside Down Camera Linux Mint on ASUS K70I0
Hi,
First of all, a quick tip: I don't think it's a good idea to make those long posts because people with the same problem searching through this thread won't be able to find rapidly an answer.
Secondly, i don't quite understand what you meant by managing to locate your camera. Did you fallow the instructions in the links provided?
As for video & audio calls in pidgin they might not be implemented for the msn client. I know for a fact that for yahoo they are not. But probably they will be in future releases.
And another thing, for me cheese showed my camera normally, but skype only worked after i installed that library and I had to start it with the command LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so skype . But be careful, the command is dependent on your system. You have to follow those instructions in the links from my previous post and select what is suitable for you.
First of all, a quick tip: I don't think it's a good idea to make those long posts because people with the same problem searching through this thread won't be able to find rapidly an answer.
Secondly, i don't quite understand what you meant by managing to locate your camera. Did you fallow the instructions in the links provided?
As for video & audio calls in pidgin they might not be implemented for the msn client. I know for a fact that for yahoo they are not. But probably they will be in future releases.
And another thing, for me cheese showed my camera normally, but skype only worked after i installed that library and I had to start it with the command LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so skype . But be careful, the command is dependent on your system. You have to follow those instructions in the links from my previous post and select what is suitable for you.