HP LaserJet 1100 wont print allthough recognized

Forum rules
Before you post please read this

HP LaserJet 1100 wont print allthough recognized

Postby kurtkroete on Wed Nov 07, 2012 11:40 am

Hi guys,

i have an HP LaserJet 1100 that i'm trying to use via a parallel to usb adapter. I just plugged it in and my system directly recognized it:
lpstat -t gives:
Code: Select all
scheduler is running
system default destination: HP-LaserJet-1100
device for HP-LaserJet-1100: usb://HP/LaserJet%201100
HP-LaserJet-1100 accepting requests since Wed 07 Nov 2012 04:18:56 PM CET
printer HP-LaserJet-1100 is idle.  enabled since Wed 07 Nov 2012 04:18:56 PM CET
   Waiting for printer to become available.

Does anyone have an idea, what I can do? Also tried to use
hp-setup -i in order to configure the printer but without any results, since it is not recognized this way.

cheers
kurtkroete
Level 1
Level 1
 
Posts: 4
Joined: Wed Nov 07, 2012 11:32 am

Linux Mint is funded by ads and donations.
 

Re: HP LaserJet 1100 wont print allthough recognized

Postby kurtkroete on Wed Nov 07, 2012 1:07 pm

hm, i just deleted the printer in the printer settings and now i cannot get my computer to recognize it again. before it had been recognized as soon as i plugged it in :/
i already read this tutorial:
http://www.techrepublic.com/article/control-printers-in-linux-from-the-command-line/5055067
and would like to try
Code: Select all
lpadmin -p laserjet1100  -m laserjet.ppd -v ? -D "HP LaserJet 1100" -L "HPLJ1100"

The options used here include:
-p laserjetV - the name of the new printer
-m laserjet.ppd - the specification of the Postscript Printer Description file so CUPS knows how to speak to the printer
-v parallel - specifies the device to be used for the printer
-D "HP LaserJet V" - a textual description of the printer
-L "Office 502" - a textual description of the location of the printer

but i do not know how to specify the device to be used for the printer :/
Code: Select all
martin@martin-ThinkPad-R400 / $ ls /dev
agpgart          mapper              sda5      tty29  tty63      ttyS8
autofs           mcelog              sda6      tty3   tty7       ttyS9
block            mei                 sda7      tty30  tty8       uinput
bsg              mem                 sda8      tty31  tty9       urandom
btrfs-control    net                 serial    tty32  ttyACM0    usbmon0
bus              network_latency     sg0       tty33  ttyACM1    usbmon1
cdc-wdm0         network_throughput  sg1       tty34  ttyACM2    usbmon2
cdc-wdm1         null                shm       tty35  ttyprintk  usbmon3
cdrom            nvram               snapshot  tty36  ttyS0      usbmon4
cdrw             oldmem              snd       tty37  ttyS1      usbmon5
char             port                sr0       tty38  ttyS10     usbmon6
console          ppp                 stderr    tty39  ttyS11     usbmon7
core             psaux               stdin     tty4   ttyS12     usbmon8
cpu              ptmx                stdout    tty40  ttyS13     v4l
cpu_dma_latency  pts                 tpm0      tty41  ttyS14     vcs
disk             ram0                tty       tty42  ttyS15     vcs1
dri              ram1                tty0      tty43  ttyS16     vcs2
dvd              ram10               tty1      tty44  ttyS17     vcs3
dvdrw            ram11               tty10     tty45  ttyS18     vcs4
ecryptfs         ram12               tty11     tty46  ttyS19     vcs5
fb0              ram13               tty12     tty47  ttyS2      vcs6
fd               ram14               tty13     tty48  ttyS20     vcs8
full             ram15               tty14     tty49  ttyS21     vcsa
fuse             ram2                tty15     tty5   ttyS22     vcsa1
fw0              ram3                tty16     tty50  ttyS23     vcsa2
hpet             ram4                tty17     tty51  ttyS24     vcsa3
input            ram5                tty18     tty52  ttyS25     vcsa4
kmsg             ram6                tty19     tty53  ttyS26     vcsa5
log              ram7                tty2      tty54  ttyS27     vcsa6
loop0            ram8                tty20     tty55  ttyS28     vcsa8
loop1            ram9                tty21     tty56  ttyS29     vga_arbiter
loop2            random              tty22     tty57  ttyS3      video0
loop3            rfkill              tty23     tty58  ttyS30     zero
loop4            rtc                 tty24     tty59  ttyS31
loop5            rtc0                tty25     tty6   ttyS4
loop6            sda                 tty26     tty60  ttyS5
loop7            sda1                tty27     tty61  ttyS6
loop-control     sda2                tty28     tty62  ttyS7

is it possible that the parallel to usb-adapter is there listed somewhere so that i can use it somehow in the comment lpadmin?
lpinfo -v gives me:
Code: Select all
martin@martin-ThinkPad-R400 / $ lpinfo -v
network socket
direct hp
network http
network lpd
network smb
network ipp
network ipp14
network https
network ipps
network beh
direct hpfax

but i don't know what to do next
kurtkroete
Level 1
Level 1
 
Posts: 4
Joined: Wed Nov 07, 2012 11:32 am

Re: HP LaserJet 1100 wont print allthough recognized

Postby kurtkroete on Wed Nov 07, 2012 3:13 pm

okay, what i did right now is erase all the printers from the printers gui and voila, no printer is any longer recognized :/
so first of all, i tried to see if i could find the adapter, which i did with
Code: Select all
martin@martin-ThinkPad-R400 ~ $ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 17ef:1004 Lenovo Integrated Webcam
Bus 002 Device 002: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g Mobile Broadband Module
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Data Rate II
Bus 003 Device 014: ID 1a86:7584 QinHeng Electronics CH340S

and the last entry shows taht the adapter has been found, since it cannot be found when the adapter is not plugged in. next i looked at dmesg|grep usb
Code: Select all
[ 8404.786289] usblp0: USB Bidirectional printer dev 76 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8407.905619] usblp0: removed
[ 8407.946290] usblp0: USB Bidirectional printer dev 76 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8413.257726] usblp0: removed
[ 8413.298304] usblp0: USB Bidirectional printer dev 76 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8418.611049] usblp0: removed
[ 8418.648179] usblp: can't set desired altsetting 0 on interface 0
[ 8418.760084] usb 3-1: USB disconnect, device number 76
[ 8420.488097] usb 3-1: new full-speed USB device number 77 using uhci_hcd
[ 8420.654324] usblp0: USB Bidirectional printer dev 77 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8428.373709] usblp0: removed
[ 8428.414261] usblp0: USB Bidirectional printer dev 77 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8428.432120] usb 3-1: USB disconnect, device number 77
[ 8428.432250] usblp0: removed
[ 8428.672054] usb 3-1: new full-speed USB device number 78 using uhci_hcd
[ 8428.871357] usblp0: USB Bidirectional printer dev 78 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8433.725803] usblp0: removed
[ 8433.729175] usblp: can't set desired altsetting 0 on interface 0
[ 8433.888152] usb 3-1: USB disconnect, device number 78
[ 8434.128077] usb 3-1: new full-speed USB device number 79 using uhci_hcd
[ 8434.302331] usblp0: USB Bidirectional printer dev 79 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8438.985810] usblp0: removed
[ 8438.990177] usblp: can't set desired altsetting 0 on interface 0
[ 8439.096167] usb 3-1: USB disconnect, device number 79
[ 8439.336062] usb 3-1: new full-speed USB device number 80 using uhci_hcd
[ 8439.539323] usblp0: USB Bidirectional printer dev 80 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8444.306059] usblp0: removed
[ 8444.346293] usblp0: USB Bidirectional printer dev 80 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8444.552115] usb 3-1: USB disconnect, device number 80
[ 8444.552257] usblp0: removed
[ 8446.280100] usb 3-1: new full-speed USB device number 81 using uhci_hcd
[ 8446.447296] usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8449.605960] usblp0: removed
[ 8449.647301] usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8454.957814] usblp0: removed
[ 8454.998371] usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8460.305799] usblp0: removed
[ 8460.347339] usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8465.657785] usblp0: removed
[ 8465.698363] usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8471.010047] usblp0: removed
[ 8471.050368] usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8476.362558] usblp0: removed
[ 8476.403287] usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8476.544168] usb 3-1: USB disconnect, device number 81
[ 8476.544400] usblp0: removed
[ 8476.784094] usb 3-1: new full-speed USB device number 82 using uhci_hcd
[ 8476.991367] usblp0: USB Bidirectional printer dev 82 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8481.713834] usblp0: removed
[ 8481.717166] usblp: can't set desired altsetting 0 on interface 0
[ 8481.752155] usb 3-1: USB disconnect, device number 82
[ 8481.992055] usb 3-1: new full-speed USB device number 83 using uhci_hcd
[ 8482.195357] usblp0: USB Bidirectional printer dev 83 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8486.975181] usblp0: removed
[ 8487.017339] usblp0: USB Bidirectional printer dev 83 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8487.208141] usb 3-1: USB disconnect, device number 83
[ 8487.208340] usblp0: removed
[ 8488.940049] usb 3-1: new full-speed USB device number 84 using uhci_hcd
[ 8489.110319] usblp0: USB Bidirectional printer dev 84 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8492.277811] usblp0: removed
[ 8492.319356] usblp0: USB Bidirectional printer dev 84 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8497.631294] usblp0: removed
[ 8497.672326] usblp0: USB Bidirectional printer dev 84 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8497.872110] usb 3-1: USB disconnect, device number 84
[ 8497.872250] usblp0: removed
[ 8498.112068] usb 3-1: new full-speed USB device number 85 using uhci_hcd
[ 8498.321357] usblp0: USB Bidirectional printer dev 85 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8502.929928] usblp0: removed
[ 8502.933180] usblp: can't set desired altsetting 0 on interface 0
[ 8503.080187] usb 3-1: USB disconnect, device number 85
[ 8503.320076] usb 3-1: new full-speed USB device number 86 using uhci_hcd
[ 8503.508336] usblp0: USB Bidirectional printer dev 86 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8508.241786] usblp0: removed
[ 8508.265295] usblp0: USB Bidirectional printer dev 86 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8508.288109] usb 3-1: USB disconnect, device number 86
[ 8508.288456] usblp0: removed
[ 8510.064102] usb 3-1: new full-speed USB device number 87 using uhci_hcd
[ 8510.234358] usblp0: USB Bidirectional printer dev 87 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8513.522995] usblp0: removed
[ 8513.553194] usblp: can't set desired altsetting 0 on interface 0
[ 8513.744133] usb 3-1: USB disconnect, device number 87
[ 8515.476099] usb 3-1: new full-speed USB device number 88 using uhci_hcd
[ 8515.653304] usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8518.813698] usblp0: removed
[ 8518.855318] usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8524.165805] usblp0: removed
[ 8524.206363] usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8529.517953] usblp0: removed
[ 8529.558372] usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8534.869783] usblp0: removed
[ 8534.910386] usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8535.072150] usb 3-1: USB disconnect, device number 88
[ 8535.072378] usblp0: removed
[ 8535.312080] usb 3-1: new full-speed USB device number 89 using uhci_hcd
[ 8535.508376] usblp0: USB Bidirectional printer dev 89 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8540.223819] usblp0: removed
[ 8540.267343] usblp0: USB Bidirectional printer dev 89 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8540.280079] usb 3-1: USB disconnect, device number 89
[ 8540.280212] usblp0: removed
[ 8542.048090] usb 3-1: new full-speed USB device number 90 using uhci_hcd
[ 8542.221306] usblp0: USB Bidirectional printer dev 90 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8542.264179] usb 3-1: USB disconnect, device number 90
[ 8542.264363] usblp0: removed
[ 8542.504090] usb 3-1: new full-speed USB device number 91 using uhci_hcd
[ 8542.708349] usblp0: USB Bidirectional printer dev 91 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8545.526334] usblp0: removed
[ 8545.530188] usblp: can't set desired altsetting 0 on interface 0
[ 8545.736139] usb 3-1: USB disconnect, device number 91
[ 8545.976073] usb 3-1: new full-speed USB device number 92 using uhci_hcd
[ 8546.173399] usblp0: USB Bidirectional printer dev 92 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8550.789861] usblp0: removed
[ 8550.831378] usblp0: USB Bidirectional printer dev 92 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8550.944114] usb 3-1: USB disconnect, device number 92
[ 8550.944347] usblp0: removed
[ 8552.672084] usb 3-1: new full-speed USB device number 93 using uhci_hcd
[ 8552.846346] usblp0: USB Bidirectional printer dev 93 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8556.089945] usblp0: removed
[ 8556.127207] usblp: can't set desired altsetting 0 on interface 0
[ 8556.152224] usb 3-1: USB disconnect, device number 93
[ 8557.908080] usb 3-1: new full-speed USB device number 94 using uhci_hcd
[ 8558.086347] usblp0: USB Bidirectional printer dev 94 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8559.331044] usblp0: removed
[ 8559.371319] usblp0: USB Bidirectional printer dev 94 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8559.377497] usb 3-1: USB disconnect, device number 94
[ 8559.377622] usblp0: removed
[ 8561.152202] usb 3-1: new full-speed USB device number 95 using uhci_hcd
[ 8561.330350] usblp0: USB Bidirectional printer dev 95 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8566.641778] usblp0: removed
[ 8566.674213] usblp: can't set desired altsetting 0 on interface 0
[ 8566.816146] usb 3-1: USB disconnect, device number 95
[ 8568.544096] usb 3-1: new full-speed USB device number 96 using uhci_hcd
[ 8568.722359] usblp0: USB Bidirectional printer dev 96 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8571.933651] usblp0: removed
[ 8571.975350] usblp0: USB Bidirectional printer dev 96 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8577.287316] usblp0: removed
[ 8577.325210] usblp: can't set desired altsetting 0 on interface 0
[ 8577.480186] usb 3-1: USB disconnect, device number 96
[ 8579.208100] usb 3-1: new full-speed USB device number 97 using uhci_hcd
[ 8579.376328] usblp0: USB Bidirectional printer dev 97 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8582.581838] usblp0: removed
[ 8582.622376] usblp0: USB Bidirectional printer dev 97 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8582.688128] usb 3-1: USB disconnect, device number 97
[ 8582.688349] usblp0: removed
[ 8582.928088] usb 3-1: new full-speed USB device number 98 using uhci_hcd
[ 8583.142398] usblp0: USB Bidirectional printer dev 98 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8587.881763] usblp0: removed
[ 8587.885212] usblp: can't set desired altsetting 0 on interface 0
[ 8587.900121] usb 3-1: USB disconnect, device number 98
[ 8588.140068] usb 3-1: new full-speed USB device number 99 using uhci_hcd
[ 8588.315370] usblp0: USB Bidirectional printer dev 99 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8593.193737] usblp0: removed
[ 8593.234378] usblp0: USB Bidirectional printer dev 99 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8593.352155] usb 3-1: USB disconnect, device number 99
[ 8593.352372] usblp0: removed
[ 8595.080118] usb 3-1: new full-speed USB device number 100 using uhci_hcd
[ 8595.248306] usblp0: USB Bidirectional printer dev 100 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8595.248353] usb 3-1: USB disconnect, device number 100
[ 8595.248437] usblp0: removed
[ 8595.488107] usb 3-1: new full-speed USB device number 101 using uhci_hcd
[ 8595.691365] usblp0: USB Bidirectional printer dev 101 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8598.493808] usblp0: removed
[ 8598.515406] usblp0: USB Bidirectional printer dev 101 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8598.560159] usb 3-1: USB disconnect, device number 101
[ 8598.560361] usblp0: removed
[ 8600.316097] usb 3-1: new full-speed USB device number 102 using uhci_hcd
[ 8600.497367] usblp0: USB Bidirectional printer dev 102 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8601.550239] usblp0: removed
[ 8601.592341] usblp0: USB Bidirectional printer dev 102 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8601.784136] usb 3-1: USB disconnect, device number 102
[ 8601.784369] usblp0: removed
[ 8603.512109] usb 3-1: new full-speed USB device number 103 using uhci_hcd
[ 8603.689351] usblp0: USB Bidirectional printer dev 103 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8604.749311] usblp0: removed
[ 8604.790443] usblp0: USB Bidirectional printer dev 103 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8605.008113] usb 3-1: USB disconnect, device number 103
[ 8605.008265] usblp0: removed
[ 8606.736104] usb 3-1: new full-speed USB device number 104 using uhci_hcd
[ 8606.920357] usblp0: USB Bidirectional printer dev 104 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8608.691817] usblp0: removed
[ 8608.729212] usblp: can't set desired altsetting 0 on interface 0
[ 8608.976156] usb 3-1: USB disconnect, device number 104
[ 8610.704058] usb 3-1: new full-speed USB device number 105 using uhci_hcd
[ 8610.877337] usblp0: USB Bidirectional printer dev 105 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8613.985897] usblp0: removed
[ 8614.026390] usblp0: USB Bidirectional printer dev 105 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8614.184142] usb 3-1: USB disconnect, device number 105
[ 8614.184359] usblp0: removed
[ 8614.424067] usb 3-1: new full-speed USB device number 106 using uhci_hcd
[ 8614.619355] usblp0: USB Bidirectional printer dev 106 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8619.334056] usblp0: removed
[ 8619.337196] usblp: can't set desired altsetting 0 on interface 0
[ 8619.392150] usb 3-1: USB disconnect, device number 106
[ 8619.632059] usb 3-1: new full-speed USB device number 107 using uhci_hcd
[ 8619.821391] usblp0: USB Bidirectional printer dev 107 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8624.649837] usblp0: removed
[ 8624.654206] usblp: can't set desired altsetting 0 on interface 0
[ 8624.848144] usb 3-1: USB disconnect, device number 107
[ 8625.088099] usb 3-1: new full-speed USB device number 108 using uhci_hcd
[ 8625.276397] usblp0: USB Bidirectional printer dev 108 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8629.913730] usblp0: removed
[ 8629.918225] usblp: can't set desired altsetting 0 on interface 0
[ 8630.056138] usb 3-1: USB disconnect, device number 108
[ 8630.296103] usb 3-1: new full-speed USB device number 109 using uhci_hcd
[ 8630.478409] usblp0: USB Bidirectional printer dev 109 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8635.227144] usblp0: removed
[ 8635.231205] usblp: can't set desired altsetting 0 on interface 0
[ 8635.264147] usb 3-1: USB disconnect, device number 109
[ 8635.504090] usb 3-1: new full-speed USB device number 110 using uhci_hcd
[ 8635.719362] usblp0: USB Bidirectional printer dev 110 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8640.542383] usblp0: removed
[ 8640.550334] usblp: can't set desired altsetting 0 on interface 0
[ 8640.720130] usb 3-1: USB disconnect, device number 110
[ 8640.960100] usb 3-1: new full-speed USB device number 111 using uhci_hcd
[ 8641.149365] usblp0: USB Bidirectional printer dev 111 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8645.809771] usblp0: removed
[ 8645.850357] usblp0: USB Bidirectional printer dev 111 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8645.928138] usb 3-1: USB disconnect, device number 111
[ 8645.928380] usblp0: removed
[ 8647.656120] usb 3-1: new full-speed USB device number 112 using uhci_hcd
[ 8647.826365] usblp0: USB Bidirectional printer dev 112 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8651.105738] usblp0: removed
[ 8651.143222] usblp: can't set desired altsetting 0 on interface 0
[ 8651.384152] usb 3-1: USB disconnect, device number 112
[ 8653.112078] usb 3-1: new full-speed USB device number 113 using uhci_hcd
[ 8653.284378] usblp0: USB Bidirectional printer dev 113 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8656.401836] usblp0: removed
[ 8656.439231] usblp: can't set desired altsetting 0 on interface 0
[ 8656.592130] usb 3-1: USB disconnect, device number 113
[ 8658.320067] usb 3-1: new full-speed USB device number 114 using uhci_hcd
[ 8658.492352] usblp0: USB Bidirectional printer dev 114 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8658.492426] usb 3-1: USB disconnect, device number 114
[ 8658.492583] usblp0: removed
[ 8658.732060] usb 3-1: new full-speed USB device number 115 using uhci_hcd
[ 8658.942371] usblp0: USB Bidirectional printer dev 115 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8661.520855] usblp0: removed
[ 8661.562371] usblp0: USB Bidirectional printer dev 115 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8661.800150] usb 3-1: USB disconnect, device number 115
[ 8661.800394] usblp0: removed
[ 8663.528041] usb 3-1: new full-speed USB device number 116 using uhci_hcd
[ 8663.698362] usblp0: USB Bidirectional printer dev 116 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8666.822227] usblp0: removed
[ 8666.863452] usblp0: USB Bidirectional printer dev 116 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8667.008133] usb 3-1: USB disconnect, device number 116
[ 8667.008365] usblp0: removed
[ 8667.248086] usb 3-1: new full-speed USB device number 117 using uhci_hcd
[ 8667.419366] usblp0: USB Bidirectional printer dev 117 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8672.173922] usblp0: removed
[ 8672.215407] usblp0: USB Bidirectional printer dev 117 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8672.464122] usb 3-1: USB disconnect, device number 117
[ 8672.464353] usblp0: removed
[ 8673.996085] usb 3-1: new full-speed USB device number 118 using uhci_hcd
[ 8674.168496] usblp0: USB Bidirectional printer dev 118 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8674.200264] usb 3-1: USB disconnect, device number 118
[ 8674.200486] usblp0: removed
[ 8674.440092] usb 3-1: new full-speed USB device number 119 using uhci_hcd
[ 8674.656410] usblp0: USB Bidirectional printer dev 119 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8677.474309] usblp0: removed
[ 8677.478210] usblp: can't set desired altsetting 0 on interface 0
[ 8677.672110] usb 3-1: USB disconnect, device number 119
[ 8677.912060] usb 3-1: new full-speed USB device number 120 using uhci_hcd
[ 8678.120411] usblp0: USB Bidirectional printer dev 120 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8682.737816] usblp0: removed
[ 8682.778343] usblp0: USB Bidirectional printer dev 120 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8682.880128] usb 3-1: USB disconnect, device number 120
[ 8682.880363] usblp0: removed
[ 8684.608067] usb 3-1: new full-speed USB device number 121 using uhci_hcd
[ 8684.782356] usblp0: USB Bidirectional printer dev 121 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8688.039291] usblp0: removed
[ 8688.077230] usblp: can't set desired altsetting 0 on interface 0
[ 8688.088292] usb 3-1: USB disconnect, device number 121
[ 8689.860095] usb 3-1: new full-speed USB device number 122 using uhci_hcd
[ 8690.035366] usblp0: USB Bidirectional printer dev 122 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8690.072125] usb 3-1: USB disconnect, device number 122
[ 8690.072355] usblp0: removed
[ 8690.312061] usb 3-1: new full-speed USB device number 123 using uhci_hcd
[ 8690.519368] usblp0: USB Bidirectional printer dev 123 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8693.333732] usblp0: removed
[ 8693.337224] usblp: can't set desired altsetting 0 on interface 0
[ 8693.544146] usb 3-1: USB disconnect, device number 123
[ 8693.784080] usb 3-1: new full-speed USB device number 124 using uhci_hcd
[ 8693.968383] usblp0: USB Bidirectional printer dev 124 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8698.647688] usblp0: removed
[ 8698.651218] usblp: can't set desired altsetting 0 on interface 0
[ 8698.752167] usb 3-1: USB disconnect, device number 124
[ 8698.992075] usb 3-1: new full-speed USB device number 125 using uhci_hcd
[ 8699.195407] usblp0: USB Bidirectional printer dev 125 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8703.910019] usblp0: removed
[ 8703.953389] usblp0: USB Bidirectional printer dev 125 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8703.960164] usb 3-1: USB disconnect, device number 125
[ 8703.960352] usblp0: removed
[ 8705.732084] usb 3-1: new full-speed USB device number 126 using uhci_hcd
[ 8705.905345] usblp0: USB Bidirectional printer dev 126 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8709.212124] usblp0: removed
[ 8709.253382] usblp0: USB Bidirectional printer dev 126 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8714.563658] usblp0: removed
[ 8714.601245] usblp: can't set desired altsetting 0 on interface 0
[ 8714.624181] usb 3-1: USB disconnect, device number 126
[ 8716.384116] usb 3-1: new full-speed USB device number 127 using uhci_hcd
[ 8716.552370] usblp0: USB Bidirectional printer dev 127 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8719.857731] usblp0: removed
[ 8719.898419] usblp0: USB Bidirectional printer dev 127 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8725.209847] usblp0: removed
[ 8725.251377] usblp0: USB Bidirectional printer dev 127 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8730.562653] usblp0: removed
[ 8730.608366] usblp0: USB Bidirectional printer dev 127 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8731.635040] usblp0: removed
[ 8731.678523] usblp0: USB Bidirectional printer dev 127 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8731.736120] usb 3-1: USB disconnect, device number 127
[ 8731.736446] usblp0: removed
[ 8733.464088] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 8733.636334] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8735.613070] usblp0: removed
[ 8735.659386] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8736.691850] usblp0: removed
[ 8736.695222] usblp: can't set desired altsetting 0 on interface 0
[ 8736.696099] usb 3-1: USB disconnect, device number 2
[ 8736.940088] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 8737.145420] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8740.917728] usblp0: removed
[ 8740.958398] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8741.160172] usb 3-1: USB disconnect, device number 3
[ 8741.160411] usblp0: removed
[ 8742.888089] usb 3-1: new full-speed USB device number 4 using uhci_hcd
[ 8743.060359] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8746.213855] usblp0: removed
[ 8746.255410] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8751.567152] usblp0: removed
[ 8751.604260] usblp: can't set desired altsetting 0 on interface 0
[ 8751.824155] usb 3-1: USB disconnect, device number 4
[ 8753.552116] usb 3-1: new full-speed USB device number 5 using uhci_hcd
[ 8753.726364] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8753.726413] usb 3-1: USB disconnect, device number 5
[ 8753.726525] usblp0: removed
[ 8753.964052] usb 3-1: new full-speed USB device number 6 using uhci_hcd
[ 8754.180424] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8756.609241] usblp0: removed
[ 8756.651396] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8756.784145] usb 3-1: USB disconnect, device number 6
[ 8756.784375] usblp0: removed
[ 8758.512089] usb 3-1: new full-speed USB device number 7 using uhci_hcd
[ 8758.684366] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8758.684440] usb 3-1: USB disconnect, device number 7
[ 8758.684581] usblp0: removed
[ 8758.924100] usb 3-1: new full-speed USB device number 8 using uhci_hcd
[ 8759.130394] usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8761.655325] usblp0: removed
[ 8761.659243] usblp: can't set desired altsetting 0 on interface 0
[ 8761.744136] usb 3-1: USB disconnect, device number 8
[ 8761.984093] usb 3-1: new full-speed USB device number 9 using uhci_hcd
[ 8762.188395] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8766.918626] usblp0: removed
[ 8766.956433] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8767.200136] usb 3-1: USB disconnect, device number 9
[ 8767.200370] usblp0: removed
[ 8768.928096] usb 3-1: new full-speed USB device number 10 using uhci_hcd
[ 8769.099370] usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8772.214003] usblp0: removed
[ 8772.254354] usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8772.408150] usb 3-1: USB disconnect, device number 10
[ 8772.408382] usblp0: removed
[ 8772.648092] usb 3-1: new full-speed USB device number 11 using uhci_hcd
[ 8772.855379] usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8777.562388] usblp0: removed
[ 8777.605402] usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8777.616404] usb 3-1: USB disconnect, device number 11
[ 8777.616530] usblp0: removed
[ 8779.384100] usb 3-1: new full-speed USB device number 12 using uhci_hcd
[ 8779.571394] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8780.609693] usblp0: removed
[ 8780.651337] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8780.840161] usb 3-1: USB disconnect, device number 12
[ 8780.840394] usblp0: removed
[ 8782.568067] usb 3-1: new full-speed USB device number 13 using uhci_hcd
[ 8782.751380] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8788.061866] usblp0: removed
[ 8788.103384] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8793.415174] usblp0: removed
[ 8793.457388] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8798.767140] usblp0: removed
[ 8798.810388] usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8798.944153] usb 3-1: USB disconnect, device number 13
[ 8798.944401] usblp0: removed
[ 8799.184083] usb 3-1: new full-speed USB device number 14 using uhci_hcd
[ 8799.393393] usblp0: USB Bidirectional printer dev 14 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8804.070180] usblp0: removed
[ 8804.082387] usblp0: USB Bidirectional printer dev 14 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8809.393779] usblp0: removed
[ 8809.430253] usblp: can't set desired altsetting 0 on interface 0
[ 8809.608161] usb 3-1: USB disconnect, device number 14
[ 8811.336115] usb 3-1: new full-speed USB device number 15 using uhci_hcd
[ 8811.511347] usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8811.511406] usb 3-1: USB disconnect, device number 15
[ 8811.511496] usblp0: removed
[ 8811.752127] usb 3-1: new full-speed USB device number 16 using uhci_hcd
[ 8811.933372] usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8814.552864] usblp0: removed
[ 8814.594382] usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8814.816139] usb 3-1: USB disconnect, device number 16
[ 8814.816343] usblp0: removed
[ 8816.544077] usb 3-1: new full-speed USB device number 17 using uhci_hcd
[ 8816.719358] usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8817.761128] usblp0: removed
[ 8817.802362] usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8818.040152] usb 3-1: USB disconnect, device number 17
[ 8818.040383] usblp0: removed
[ 8819.768087] usb 3-1: new full-speed USB device number 18 using uhci_hcd
[ 8819.936367] usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8819.936445] usb 3-1: USB disconnect, device number 18
[ 8819.936664] usblp0: removed
[ 8820.176094] usb 3-1: new full-speed USB device number 19 using uhci_hcd
[ 8820.352402] usblp0: USB Bidirectional printer dev 19 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8825.797871] usblp0: removed
[ 8825.801358] usblp: can't set desired altsetting 0 on interface 0
[ 8825.976150] usb 3-1: USB disconnect, device number 19
[ 8826.216117] usb 3-1: new full-speed USB device number 20 using uhci_hcd
[ 8826.419381] usblp0: USB Bidirectional printer dev 20 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8831.058356] usblp0: removed
[ 8831.062264] usblp: can't set desired altsetting 0 on interface 0
[ 8831.184128] usb 3-1: USB disconnect, device number 20
[ 8831.424090] usb 3-1: new full-speed USB device number 21 using uhci_hcd
[ 8831.636439] usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8836.375331] usblp0: removed
[ 8836.417410] usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8836.640133] usb 3-1: USB disconnect, device number 21
[ 8836.640331] usblp0: removed
[ 8838.368080] usb 3-1: new full-speed USB device number 22 using uhci_hcd
[ 8838.544407] usblp0: USB Bidirectional printer dev 22 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8841.674527] usblp0: removed
[ 8841.715355] usblp0: USB Bidirectional printer dev 22 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8841.848148] usb 3-1: USB disconnect, device number 22
[ 8841.848374] usblp0: removed
[ 8842.088074] usb 3-1: new full-speed USB device number 23 using uhci_hcd
[ 8842.266453] usblp0: USB Bidirectional printer dev 23 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8846.973874] usblp0: removed
[ 8847.002465] usblp0: USB Bidirectional printer dev 23 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8847.056131] usb 3-1: USB disconnect, device number 23
[ 8847.056354] usblp0: removed
[ 8848.796058] usb 3-1: new full-speed USB device number 24 using uhci_hcd
[ 8848.966393] usblp0: USB Bidirectional printer dev 24 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8852.262233] usblp0: removed
[ 8852.303395] usblp0: USB Bidirectional printer dev 24 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8857.616079] usblp0: removed
[ 8857.657394] usblp0: USB Bidirectional printer dev 24 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8862.967291] usblp0: removed
[ 8863.008412] usblp0: USB Bidirectional printer dev 24 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8868.317875] usblp0: removed
[ 8868.358403] usblp0: USB Bidirectional printer dev 24 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8873.669881] usblp0: removed
[ 8873.707289] usblp: can't set desired altsetting 0 on interface 0
[ 8873.840157] usb 3-1: USB disconnect, device number 24
[ 8875.568108] usb 3-1: new full-speed USB device number 25 using uhci_hcd
[ 8875.739357] usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8878.967197] usblp0: removed
[ 8879.009421] usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8884.317876] usblp0: removed
[ 8884.358395] usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8889.670134] usblp0: removed
[ 8889.710423] usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8895.018641] usblp0: removed
[ 8895.060399] usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8900.370844] usblp0: removed
[ 8900.411439] usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8905.721773] usblp0: removed
[ 8905.762568] usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8905.832140] usb 3-1: USB disconnect, device number 25
[ 8905.832368] usblp0: removed
[ 8906.072076] usb 3-1: new full-speed USB device number 26 using uhci_hcd
[ 8906.285455] usblp0: USB Bidirectional printer dev 26 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8911.022361] usblp0: removed
[ 8911.026268] usblp: can't set desired altsetting 0 on interface 0
[ 8911.040128] usb 3-1: USB disconnect, device number 26
[ 8911.280076] usb 3-1: new full-speed USB device number 27 using uhci_hcd
[ 8911.490451] usblp0: USB Bidirectional printer dev 27 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8916.333888] usblp0: removed
[ 8916.374453] usblp0: USB Bidirectional printer dev 27 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8916.496123] usb 3-1: USB disconnect, device number 27
[ 8916.496476] usblp0: removed
[ 8918.224060] usb 3-1: new full-speed USB device number 28 using uhci_hcd
[ 8918.397420] usblp0: USB Bidirectional printer dev 28 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8921.633888] usblp0: removed
[ 8921.671278] usblp: can't set desired altsetting 0 on interface 0
[ 8921.704225] usb 3-1: USB disconnect, device number 28
[ 8923.452084] usb 3-1: new full-speed USB device number 29 using uhci_hcd
[ 8923.631410] usblp0: USB Bidirectional printer dev 29 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8924.676898] usblp0: removed
[ 8924.717382] usblp0: USB Bidirectional printer dev 29 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8924.928116] usb 3-1: USB disconnect, device number 29
[ 8924.928360] usblp0: removed
[ 8926.656120] usb 3-1: new full-speed USB device number 30 using uhci_hcd
[ 8926.825399] usblp0: USB Bidirectional printer dev 30 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8926.825453] usb 3-1: USB disconnect, device number 30
[ 8926.825563] usblp0: removed
[ 8927.064104] usb 3-1: new full-speed USB device number 31 using uhci_hcd
[ 8927.263448] usblp0: USB Bidirectional printer dev 31 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8932.718107] usblp0: removed
[ 8932.724062] usblp: can't set desired altsetting 0 on interface 0
[ 8932.864142] usb 3-1: USB disconnect, device number 31
[ 8933.104087] usb 3-1: new full-speed USB device number 32 using uhci_hcd
[ 8933.319354] usblp0: USB Bidirectional printer dev 32 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8937.982701] usblp0: removed
[ 8938.024400] usblp0: USB Bidirectional printer dev 32 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8938.076171] usb 3-1: USB disconnect, device number 32
[ 8938.076375] usblp0: removed
[ 8939.804115] usb 3-1: new full-speed USB device number 33 using uhci_hcd
[ 8939.986444] usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8941.285705] usblp0: removed
[ 8941.312446] usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584
[ 8941.544116] usb 3-1: USB disconnect, device number 33
[ 8941.544315] usblp0: removed
[ 8943.272106] usb 3-1: new full-speed USB device number 34 using uhci_hcd
[ 8943.445407] usblp0: USB Bidirectional printer dev 34 if 0 alt 0 proto 2 vid 0x1A86 pid 0x7584

but in /dev i find the folder /dev/usb where there is lp0 in it as soon as the adapter is plugged in. so what i did now, is that i used cups-web interface to set up the printer (but since i cannot find the ppd-file for my printer i select the printer manually) and give the adress usb://dev/usb/lp0
but that doesn't lead to ANY results. i don't know what else to do :/
does anybody have some helpfull suggestions?

[EDIT]
lpinfo -v gives:
Code: Select all
martin@martin-ThinkPad-R400 /usr/lib/cups/backend $ lpinfo -v
network ipps
network ipp14
direct hp
network https
network socket
network beh
network smb
network http
network ipp
network lpd
direct hpfax
direct usb://Unknown/Printer

[/EDIT]
kurtkroete
Level 1
Level 1
 
Posts: 4
Joined: Wed Nov 07, 2012 11:32 am

Re: HP LaserJet 1100 wont print allthough recognized

Postby ponchuk on Wed Nov 07, 2012 8:25 pm

check my post on laser scanner. i fixed the printer and scanner. there is a new plugin for hp.
ponchuk
Level 1
Level 1
 
Posts: 30
Joined: Wed Jun 08, 2011 1:19 pm

Re: HP LaserJet 1100 wont print allthough recognized

Postby kurtkroete on Thu Nov 08, 2012 10:04 am

ponchuk wrote:check my post on laser scanner. i fixed the printer and scanner. there is a new plugin for hp.

thanks for your advice, i reinstalled hplip and hplib-gui and followed the instructions given in the posted link. but the printer is not recognized either, i also tried to adress it manually with several variations.
what i also found out is, that lsusb gives me this, when only the adapter is plugged in:
Code: Select all
martin@martin-ThinkPad-R400 /dev $ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 17ef:1004 Lenovo Integrated Webcam
Bus 002 Device 002: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g Mobile Broadband Module
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Data Rate II
Bus 003 Device 093: ID 1a86:7584 QinHeng Electronics CH340S

and the last entry is not present as soon as i connect to printer to the parallel adapter and replug the whole thing into the usb port. also lpinfo -v gives me this, when the printer is UNPLUGGED?!:
Code: Select all
martin@martin-ThinkPad-R400 ~ $ lpinfo -v
network socket
network ipps
network ipp14
direct hp
network https
network http
network ipp
network lpd
network smb
network beh
direct usb://Unknown/Printer
direct hpfax

does anybody have another idea? could it be that there's a bug somewhere?
kurtkroete
Level 1
Level 1
 
Posts: 4
Joined: Wed Nov 07, 2012 11:32 am

Re: HP LaserJet 1100 wont print allthough recognized

Postby pdc_2 on Sun Nov 11, 2012 11:05 pm

your issue sounds very like the one Mr P posted

viewtopic.php?f=51&t=109243

.........the thread is listed just before yours................ usb cables.......usb to parallel switches................
pdc_2
Level 6
Level 6
 
Posts: 1179
Joined: Mon May 11, 2009 1:21 am


Return to Printers & Scanners

Who is online

Users browsing this forum: Yahoo [Bot] and 5 guests