Problem with Samsung ML-2010

[claude1984]

OK what is wrong here? Printer not working. Not sure I understand the URI thing, had to google it.

[Kalyk]

From this screenshot I can't tell what's wrong.
Perhaps if you start the terminal and do

Code: Select all

lsusb

then you should see the exact name of the printer.
And that is the most important thing to know I think.
That is what has to be in the link after usb://

[claude1984]

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 003: ID 0461:4e26 Primax Electronics, Ltd
Bus 005 Device 002: ID 0461:4de2 Primax Electronics, Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub



This is what I get when I do lsusb :s

[pdc_2]

Bonjour Claude; welcome to the forums

we have one of these printers pres d'ici and when I plug it in, and type

lsusb

I get

Bus 002 Device 002: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer

.....I can't see that on your lsusb printout so the computer is not seeing the printer; is it all plugged in and turned on........a usb3 port?.........a usb hub? .....try another usb port you know that works......

when you get it seen on lsusb, it is more likely to work...........I find it is auto-configured when one plugs it into Mint ..............