I'm trying to get Linux Mint to work from a live DVD before deciding whether to install it. It seems to mostly work, except for the wireless card. I found a website (http://boredwookie.net/index.php/blog/b ... x-mint-13/) describing how to fix my exact problem, unfortunately I don't have access to a wired connection, so I can't use the package manager to install ndiswrapper-dkms. Under Windows, I went online and found the website (http://community.linuxmint.com/software ... apper-dkms) for that package, but it doesn't have a download link.
So I need either an http or ftp link to the ndiswrapper-dkms package or a protocol handler for apt for Windows that will let me download the package. Can anyone give me information on either of those options?
how to download ndiswrapper-dkms [SOLVED]
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
how to download ndiswrapper-dkms [SOLVED]
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: how to download ndiswrapper-dkms
Are you testing mint13? The BCM4306/2 chipset 'should' work with the b43legacy driver rather than installing a Windows driver, see http://linuxwireless.org/en/users/Drivers/b43#supported. You would still need internet access to install this however see http://forums.linuxmint.com/viewtopic.p ... om#p449391. Note you cannot permanently install drivers in a live disc.
[Edit] your original post and add [SOLVED] once your question is resolved.
“The people are my God” stressing the factor determining man’s destiny lies within man not in anything outside man, and thereby defining man as the dominator and remoulder of the world.
“The people are my God” stressing the factor determining man’s destiny lies within man not in anything outside man, and thereby defining man as the dominator and remoulder of the world.
Re: how to download ndiswrapper-dkms
Yes, it's Linux Mint 13 (using MATE). It reports the wireless card as a BCM4312, which according to the site you linked to, should work with b43 v 2.6.33 and above. Of course, it doesn't actually work. All of the instructions for making it work look like they involve re-flashing the wireless card firmware, and I really don't want to do that. Have I misunderstood what "b43-fwcutter" does?
Another site suggested using a Broadcom driver. I downloaded bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu3_amd64.deb (from a link off of a link from your link: http://packages.ubuntu.com/lucid/bcmwl-kernel-source) and tried to install it and got an error that pointed to a log file with the error "autoconf.h: No such file or directory". I haven't tried to figure out what causes that yet.
And the original file I was looking for is available at (http://archive.ubuntu.com/ubuntu/pool/u ... iswrapper/). It hadn't occurred to me to search Ubuntu's site for it. It prevents the error message I was getting from ndiswrapper before, but doesn't actually make the wireless card work; the wireless settings page is just grayed out.
Another site suggested using a Broadcom driver. I downloaded bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu3_amd64.deb (from a link off of a link from your link: http://packages.ubuntu.com/lucid/bcmwl-kernel-source) and tried to install it and got an error that pointed to a log file with the error "autoconf.h: No such file or directory". I haven't tried to figure out what causes that yet.
And the original file I was looking for is available at (http://archive.ubuntu.com/ubuntu/pool/u ... iswrapper/). It hadn't occurred to me to search Ubuntu's site for it. It prevents the error message I was getting from ndiswrapper before, but doesn't actually make the wireless card work; the wireless settings page is just grayed out.
Re: how to download ndiswrapper-dkms
The link you provided was for a BCM4306 so would apply in your anycase and you seem to be overcomplicating things by looking for other drivers. As I said some things you cannot do on a live disc as it requires installation at boot time. The 4312 should work without issue with the b43 driver unless it is the LP-PHY version, you will need to provide the output of lspci -vnn| grep 14e4.qbsmd wrote:reports the wireless card as a BCM4312
[Edit] your original post and add [SOLVED] once your question is resolved.
“The people are my God” stressing the factor determining man’s destiny lies within man not in anything outside man, and thereby defining man as the dominator and remoulder of the world.
“The people are my God” stressing the factor determining man’s destiny lies within man not in anything outside man, and thereby defining man as the dominator and remoulder of the world.
Re: how to download ndiswrapper-dkms
lspci -vnn| grep 14e4
returns
04:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
So that explains why b43 is failing.
When Linux starts, I noticed it brings up a pop-up that says something about restricted drivers for some fraction of a second. I found a GUI to enable the driver and it tried to download http://archive.ubuntu.com/ubuntu/pool/r ... _amd64.deb so I'll try that driver next.
returns
04:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
So that explains why b43 is failing.
When Linux starts, I noticed it brings up a pop-up that says something about restricted drivers for some fraction of a second. I found a GUI to enable the driver and it tried to download http://archive.ubuntu.com/ubuntu/pool/r ... _amd64.deb so I'll try that driver next.
Re: how to download ndiswrapper-dkms
Success!
Procedure:
1. Boot the live DVD. Open "menu > all > additional drivers". Assuming your network card shows up, select activate.
2. When it throws an error, open the log file it points to (/var/log/jockey.log in my case). FInd the url of the driver it attempted to download (in my case http://archive.ubuntu.com/ubuntu/pool/r ... _amd64.deb).
3. Boot your normal operating system, download the driver.
4. Boot the live DVD, Navigate to the directory where the driver was saved, and open a terminal.
5. enter "sudo dpkg -i bcmwl-kernel-source_5.100.82.38+bdcom-0ubuntu6.1_amd64.deb" (replacing the driver name with the driver you downloaded).
6. Open "menu > all > additional drivers", select activate. When it is finished it will tell you to restart. Disregard this.
7. Go back to the terminal and enter "sudo modprobe -r wl" then enter "sudo modprobe wl". Wait a few seconds.
8. Click on the taskbar networking icon and hopefully select a wireless network to connect to.
Procedure:
1. Boot the live DVD. Open "menu > all > additional drivers". Assuming your network card shows up, select activate.
2. When it throws an error, open the log file it points to (/var/log/jockey.log in my case). FInd the url of the driver it attempted to download (in my case http://archive.ubuntu.com/ubuntu/pool/r ... _amd64.deb).
3. Boot your normal operating system, download the driver.
4. Boot the live DVD, Navigate to the directory where the driver was saved, and open a terminal.
5. enter "sudo dpkg -i bcmwl-kernel-source_5.100.82.38+bdcom-0ubuntu6.1_amd64.deb" (replacing the driver name with the driver you downloaded).
6. Open "menu > all > additional drivers", select activate. When it is finished it will tell you to restart. Disregard this.
7. Go back to the terminal and enter "sudo modprobe -r wl" then enter "sudo modprobe wl". Wait a few seconds.
8. Click on the taskbar networking icon and hopefully select a wireless network to connect to.