64 bit Mint 14 and Netgear WNDA3100 USB NIC [SOLVED]

[ski98033]

Hi,

Took me a bit to figure this all out, but since I did I thought I would post my solution for others. Steps to getting this to work with LinuxMint 14 are:

First get and install the windows drivers.
1. Download the ndiswrapper drivers (attached). Make sure you download the correct version (32 or 64 bit)
2. Enter unzip Broadcom_bcm43xx_USB_64bit_v2.zip
3. Enter cd Broadcom_bcm43xx_USB_64bit_v2
3. Enter sudo ndiswrapper -i bcmn43xx64.inf
4. Enter ndiswrapper -l to verify it worked. You should see something like:

bcmn43xx64 : driver installed
device (0846:9011) present


Now we have to get the kernel module working as the version in linux mint 14 does not have the kernel module and its source fails with I try to compile it.
5. First use synaptic and search on ndiswrapper. Make sure that ndiswrapper-dkms and ndiswrapper-source are NOT installed.
6. Download the latest version of ndiswrapper (attached)
7. Enter tar -zxvf ndiswrapper-1.58rc1.tar.gz
8. Enter cd ndiswrapper-1.58rc1
9. Enter make uninstall
10. Enter make
11. Enter sudo make install
12. Enter sudo modprobe ndiswrapper

Plug in the Netgear and enter iwconfig to see it.

cheers,

ski

[geogeogeo]

Hello,

The instructions above do work for 2.4GHz with the following security options : None, WEP, WPA-PSK

I could not connect to a 5GHz nor could I with WPA2, which means that you would be limited to a 54Mbps speeds.

I suppose the problem has to do with the driver itself. Could there be a more specific updated drivers for WNDA3100V2?

[mhbell]

excellent post. I followed the instructions and it worked for me after trying other posts and forums I stumbled on this one downloaded the attachments and it worked. Thank you very much