SOLVED Unable to connect Desktop to my Laptop
Posted: Thu Feb 14, 2013 10:26 am
I'm a french people, then excuse my english. I love linux's distributions and I have tried some but I'm prefering Mint. That for what I use Linux Mint 14 KDE on my computers. On my desktop I have installed Mint and Windows 8. My problem is: I never be able to connect my computers to the other. I need your help to do this.
As requested there are the results for this command "sudo /usr/lib/linuxmint/mintWifi/mintWifi.py" :
* I. scanning WIFI PCI devices...
-- Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
==> PCI ID = 10ec:8176 (rev 01)
-------------------------
* II. querying ndiswrapper...
-------------------------
* III. querying iwconfig...
wlan0 IEEE 802.11bgn ESSID:"Jo Ni St Al Ca"
Mode:Managed Frequency:2.412 GHz Access Point: 84:C9:B2:4A:14:BE
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=63/70 Signal level=-47 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:92 Missed beacon:0
lo no wireless extensions.
eth0 no wireless extensions.
-------------------------
* IV. querying ifconfig...
eth0 Link encap:Ethernet HWaddr 5c:26:0a:1b:c3:cf
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:2203 erreurs:0 :0 overruns:0 frame:0
TX packets:2203 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:136208 (136.2 KB) Octets transmis:136208 (136.2 KB)
wlan0 Link encap:Ethernet HWaddr 1c:65:9d:39:32:1b
inet adr:192.168.0.105 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::1e65:9dff:fe39:321b/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:27767 erreurs:0 :0 overruns:0 frame:0
TX packets:17130 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:37005935 (37.0 MB) Octets transmis:2687184 (2.6 MB)
-------------------------
* V. querying DHCP...
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service smbd reload
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the reload(8) utility, e.g. reload smbd
RTNETLINK answers: File exists
-------------------------
* VI. querying nslookup google.com...
Server: 192.168.0.1
Address: 192.168.0.1#53
Non-authoritative answer:
Name: google.com
Address: 74.125.226.40
Name: google.com
Address: 74.125.226.32
Name: google.com
Address: 74.125.226.46
Name: google.com
Address: 74.125.226.39
Name: google.com
Address: 74.125.226.37
Name: google.com
Address: 74.125.226.38
Name: google.com
Address: 74.125.226.41
Name: google.com
Address: 74.125.226.33
Name: google.com
Address: 74.125.226.35
Name: google.com
Address: 74.125.226.34
Name: google.com
Address: 74.125.226.36
Thank you for your help.
As requested there are the results for this command "sudo /usr/lib/linuxmint/mintWifi/mintWifi.py" :
* I. scanning WIFI PCI devices...
-- Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
==> PCI ID = 10ec:8176 (rev 01)
-------------------------
* II. querying ndiswrapper...
-------------------------
* III. querying iwconfig...
wlan0 IEEE 802.11bgn ESSID:"Jo Ni St Al Ca"
Mode:Managed Frequency:2.412 GHz Access Point: 84:C9:B2:4A:14:BE
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=63/70 Signal level=-47 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:92 Missed beacon:0
lo no wireless extensions.
eth0 no wireless extensions.
-------------------------
* IV. querying ifconfig...
eth0 Link encap:Ethernet HWaddr 5c:26:0a:1b:c3:cf
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:2203 erreurs:0 :0 overruns:0 frame:0
TX packets:2203 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:136208 (136.2 KB) Octets transmis:136208 (136.2 KB)
wlan0 Link encap:Ethernet HWaddr 1c:65:9d:39:32:1b
inet adr:192.168.0.105 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::1e65:9dff:fe39:321b/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:27767 erreurs:0 :0 overruns:0 frame:0
TX packets:17130 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:37005935 (37.0 MB) Octets transmis:2687184 (2.6 MB)
-------------------------
* V. querying DHCP...
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service smbd reload
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the reload(8) utility, e.g. reload smbd
RTNETLINK answers: File exists
-------------------------
* VI. querying nslookup google.com...
Server: 192.168.0.1
Address: 192.168.0.1#53
Non-authoritative answer:
Name: google.com
Address: 74.125.226.40
Name: google.com
Address: 74.125.226.32
Name: google.com
Address: 74.125.226.46
Name: google.com
Address: 74.125.226.39
Name: google.com
Address: 74.125.226.37
Name: google.com
Address: 74.125.226.38
Name: google.com
Address: 74.125.226.41
Name: google.com
Address: 74.125.226.33
Name: google.com
Address: 74.125.226.35
Name: google.com
Address: 74.125.226.34
Name: google.com
Address: 74.125.226.36
Thank you for your help.