[solved] how long is normal KDE boot time ??
Posted: Sat Sep 22, 2012 10:34 am
hello, I'm using kde 4.8.4 now and I get this weird thing: real boot time (by stopwatch) is far different than dmesg output.. I've tried this on unofficial LMDE KDE (tracking testing, full upgrade) and Mint 13 KDE (fresh install).
On my stopwatch, the desktop loaded after 2 minutes and 26 second (on LMDE KDE) and ~ 2 minutes on Mint 13 KDE, but dmesg only show 55 sec..
here's dmesg part on lmde:
Is that normal to have 2,5 minutes boot time ?? on mint 11 (gnome2), its only 45 sec. I think my system isn't normal, still no luck on google search on optimizing KDE startup..
On my stopwatch, the desktop loaded after 2 minutes and 26 second (on LMDE KDE) and ~ 2 minutes on Mint 13 KDE, but dmesg only show 55 sec..
here's dmesg part on lmde:
Code: Select all
[ 10.020991] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 10.360169] uvesafb: monitor limits: vf = 60 Hz, hf = 48 kHz, clk = 71 MHz
[ 10.360642] uvesafb: scrolling: redraw
[ 10.360652] uvesafb: request region 0x3c0-0x3e0 failed
[ 10.361257] uvesafb: probe of uvesafb.0 failed with error -5
[ 10.365750] vga16fb: initializing
[ 10.365759] vga16fb: mapped to 0xffff8800000a0000
[ 10.365770] checking generic (c0000000 300000) vs hw (a0000 10000)
[ 10.365883] fb1: VGA16 VGA frame buffer device
[ 10.997940] Btrfs loaded
[ 11.313187] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.258619] udevd[381]: starting version 175
[ 16.547084] ACPI: acpi_idle registered with cpuidle
[ 16.946013] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 16.946176] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 16.946180] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 16.946184] powernow-k8: 2 : pstate 2 (800 MHz)
[ 17.014955] asus_wmi: ASUS WMI generic driver loaded
[ 17.220344] ACPI: Battery Slot [BAT0] (battery present)
[ 17.220820] ACPI: AC Adapter [AC0] (off-line)
[ 17.232151] asus_wmi: Initialization: 0x0
[ 17.233078] asus_wmi: BIOS WMI version: 0.9
[ 17.233440] asus_wmi: SFUN value: 0x0
[ 17.235219] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 17.237038] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [io 0xb00-0xb0f]
[ 17.237051] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.245882] asus_wmi: Backlight controlled by ACPI video driver
[ 17.250285] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 17.250490] SP5100 TCO timer: mmio address 0xbafe00 already in use
[ 17.373243] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 17.373258] Disabling lock debugging due to kernel taint
[ 17.456306] [fglrx] Maximum main memory to use for locked dma buffers: 3414 MBytes.
[ 17.456483] [fglrx] vendor: 1002 device: 9802 count: 1
[ 17.457050] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 17.457074] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.457083] pci 0000:00:01.0: setting latency timer to 64
[ 17.457522] [fglrx] Kernel PAT support is enabled
[ 17.457567] [fglrx] module loaded - fglrx 8.98.2 [Jul 27 2012] with 1 minors
[ 17.480143] cfg80211: Calling CRDA to update world regulatory domain
[ 17.483088] Bluetooth: Core ver 2.16
[ 17.483133] NET: Registered protocol family 31
[ 17.483137] Bluetooth: HCI device and connection manager initialized
[ 17.483142] Bluetooth: HCI socket layer initialized
[ 17.483146] Bluetooth: L2CAP socket layer initialized
[ 17.483156] Bluetooth: SCO socket layer initialized
[ 17.575972] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 17.576905] usbcore: registered new interface driver btusb
[ 18.131265] brcmsmac 0000:01:00.0: bus 1 slot 0 func 0 irq 7
[ 18.131376] brcmsmac 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.131392] brcmsmac 0000:01:00.0: setting latency timer to 64
[ 18.149452] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400
[ 18.233158] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 18.375559] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.375706] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 18.375766] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 18.507411] cfg80211: World regulatory domain updated:
[ 18.507425] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.507436] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.507447] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.507456] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.507465] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.507474] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.584196] Bluetooth: hci0 command tx timeout
[ 18.745148] Linux media interface: v0.10
[ 18.784179] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 18.784569] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 18.786256] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.920244] Linux video capture interface: v2.00
[ 18.958399] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[ 18.979570] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input9
[ 18.980786] usbcore: registered new interface driver uvcvideo
[ 18.980798] USB Video Class driver (1.1.1)
[ 19.000275] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 19.003338] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 19.255336] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.258334] cfg80211: Calling CRDA for country: US
[ 19.271535] cfg80211: Regulatory domain changed to country: US
[ 19.271544] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.271550] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 19.271555] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 19.271559] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.271564] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.271569] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.271573] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 23.541713] Adding 3066876k swap on /dev/sda2. Priority:-1 extents:1 across:3066876k
[ 23.600133] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 24.493413] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 24.982824] device-mapper: uevent: version 1.0.3
[ 24.984267] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 25.306231] loop: module loaded
[ 27.958645] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
[ 27.961564] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 28.334712] fuse init (API version 7.17)
[ 39.722818] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 42.574920] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 42.574932] Bluetooth: BNEP filters: protocol multicast
[ 42.586109] Bluetooth: RFCOMM TTY layer initialized
[ 42.586128] Bluetooth: RFCOMM socket layer initialized
[ 42.586135] Bluetooth: RFCOMM ver 1.11
[ 44.005148] lp: driver loaded but no devices found
[ 44.129583] ppdev: user-space parallel port driver
[ 45.038049] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 45.038068] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 45.038968] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 45.039931] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 51.278104] usbcore: registered new interface driver usbserial
[ 51.278159] USB Serial support registered for generic
[ 51.278795] usbcore: registered new interface driver usbserial_generic
[ 51.278803] usbserial: USB Serial Driver core
[ 52.539797] fglrx_pci 0000:00:01.0: irq 44 for MSI/MSI-X
[ 52.542279] [fglrx] Firegl kernel thread PID: 3493
[ 52.542711] [fglrx] Firegl kernel thread PID: 3494
[ 52.543243] [fglrx] Firegl kernel thread PID: 3495
[ 52.543448] [fglrx] IRQ 44 Enabled
[ 52.936826] [fglrx] Gart USWC size:1116 M.
[ 52.936838] [fglrx] Gart cacheable size:442 M.
[ 52.936855] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 52.936865] [fglrx] Reserved FB block: Unshared offset:fc81000, size:37f000
[ 52.936875] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 53.536153] usb 3-3: new low-speed USB device number 3 using ohci_hcd
[ 53.704216] usb 3-3: New USB device found, idVendor=1c4f, idProduct=0003
[ 53.704231] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 53.704240] usb 3-3: Product: U+P Mouse
[ 53.704247] usb 3-3: Manufacturer: SIGMACH1P
[ 53.788193] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input13
[ 53.789091] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:12.0-3/input0
[ 53.789365] usbcore: registered new interface driver usbhid
[ 53.789373] usbhid: USB HID core driver
[ 54.381356] usb 3-3: USB disconnect, device number 3
[ 55.332343] usb 3-3: new low-speed USB device number 4 using ohci_hcd
[ 55.501354] usb 3-3: New USB device found, idVendor=1c4f, idProduct=0003
[ 55.501369] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 55.501378] usb 3-3: Product: U+P Mouse
[ 55.501385] usb 3-3: Manufacturer: SIGMACH1P
[ 55.509121] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14
[ 55.510136] generic-usb 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:12.0-3/input0
faramir@faramir-1215b ~ $