Page 1 of 1

ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Mon Nov 26, 2012 4:18 pm
by some777
Where I can download working driver, help please.

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Mon Nov 26, 2012 4:41 pm
by remoulder

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Tue Nov 27, 2012 5:14 am
by some777
As I see, I've create my thread according this forum rules. :(

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Tue Nov 27, 2012 1:24 pm
by remoulder
Maybe you didn't see point 5?

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Tue Nov 27, 2012 2:41 pm
by DrHu
http://www.ibiblio.org/pub/Linux/docs/h ... HOWTO.html

http://www.ibiblio.org/pub/Linux/docs/h ... html#VIDEO
--for ATI specific drivers, you would either check the software manager within your distribution or check the vendor's site for a compatible driver and the ATI utility to control and setup the graphics, for the X-server (used by Linux OPSs')

Point 5 in the forum rules..
And hardware specs can be shown for your system either via the settings or control panel equivalent for your specific release of linux, or you can use inxi tool to get some data

Code: Select all

inxi -G
--graphics card
inxi -F
--detected devices by the OS..
http://www.webupd8.org/2009/11/shell-sy ... linux.html
--this tool runs in a terminal..

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Wed Nov 28, 2012 2:53 am
by some777

Code: Select all

System:    Host: Flame Kernel: 3.5.0-17-generic i686 (32 bit) Desktop: Gnome Distro: Linux Mint 14 Nadia
Machine:   System: Hewlett-Packard product: hp workstation xw8000 version: 12345678 serial: FRB4260SQG 
           Mobo: Hewlett-Packard model: 0844 version: 123 serial: P86562AM4QA0D5
           Bios: Phoenix version: JQ.W1.13US date: 04/19/04
CPU:       Single core Intel Xeon CPU (-UP-) cache: 1024 KB flags: (sse sse2) 
           Clock Speeds: 1: 3189.342 MHz 2: 3189.342 MHz
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI Radeon R200 QH [Radeon 8500] 
           X.org: 1.13.0 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 80x24 Advanced Data: N/A for root 
Audio:     Card: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver: snd_intel8x0
           Sound: Advanced Linux Sound Architecture ver: 1.0.25
Network:   Card: Intel 82540EM Gigabit Ethernet Controller driver: e1000 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:0d:9d:ff:b4:4d
Drives:    HDD Total Size: 293.6GB (47.0% used) 1: id: /dev/sda model: System size: 146.8GB 
           2: id: /dev/sdb model: Storage size: 146.8GB 
Partition: ID: / size: 132G used: 3.6G (3%) fs: ext4 ID: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 148 Uptime: 16:38 Memory: 339.2/3030.4MB Client: Shell inxi: 1.8.4 

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Wed Nov 28, 2012 1:34 pm
by remoulder
some777 wrote:ATI Radeon R200 QH [Radeon 8500]
X.org: 1.13.0 drivers: ati,radeon
Afraid you are already running the only available driver for this old card. ATI/AMD withdrew driver support for it some time ago so you have to use the built in open-source driver.

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Thu Nov 29, 2012 2:45 am
by some777
How to install an open source driver on my video card?

Re: ATI Radeon R200 QH [ATI FireGL 8800]

Posted: Thu Nov 29, 2012 5:10 am
by richardsdma
the open source driver is already installed. otherwise, you wont be able to see anything.