I did have a primary computer (Dell Dimension 8300 Pent4, 3 Ghz, 1 GiB, nVidia 5200) and a spare (Gateway E-4000 Pent4; 1.8 Ghz; 1 GiB; nVidia 5500). If the Dell hadn't died 6 weeks ago, I suppose I'd still be using it. For about six months in 2010, I'd had exclusive use a an Athon 64 X2 4000+. So when the Dell died I bought a refurbished OptiPlex GX740 4400+desktop with AMD Athlon 64 X2 Processor, doing so based upon my memory of the machine I'd had use of in 2010.
But I found it's performance lacking; I had to flash the bios (viewtopic.php?f=49&t=92219
) so that it would have hardware virtualization enabled [which was not something I'd wanted to have to do because of horror stories I've read in Android forums of folks bricking their phones (but it worked out okay thanks to clear directions and a download that could run from Windows Explorer)]. And there was another problems, so I took it back and got this one. And I consider this one to be a much better machine (at least to my tastes).
I have of course googled this model of eMachines and have noted that overall, there seems to be more dissatisfied owners/former owners of this model than there are satisfied ones, and that going by what I've read I could expect some problem (expecially, perhaps, with the power supply) somewhere down the road. So I've prayed about it; and I'm comfortable with it.
I've been to http://www.coreboot.org/Supported_Motherboards
and do not see my computer's motherboad supported, neither the chip set nor southbridge:
I do note, however, Coreboot support for AMD Fam10h Northbridges, but (as I'm out of my league here) I don't know how much of a motherboard needs to be Coreboot compatable to effectively benefit from Coreboot. I did I run across an informative, 66-minute, video in the Linux Mint Software Portage of Coreboot principals who explain what Coreboot is and why it was needed: http://linuxmintlinux.cyacomputerblog.c ... -firmware/
Posted on February 07, 2011 by learnlinux
Although I did download grub-coreboot and grub-coreboot-bin from the Linux Mint Software Portal for Linux Mint 12, it looks like didn't have to do that because I see it and other coreboot packages already in synaptic package manager on LMDE and Oneiric, and other coreboot packages in Lisa's synaptic package manager.
On LMDE (which I'm using presently), before I installed grub-coreboot 1.99-11, grub-coreboot-bin 1.99-11 and grub-linuxbios 1.99-11, boot time beginning when I selected this os from the grub menu until the login screen appeared was c. 20 seconds. After installing those packages, it's c. 14 seconds. (please note those times are only based upon casual observation).
After spending some time to no avail trying to get Cpu-G running on Ubuntu – its not happening so far (for me), I installed Nvramtool 0.0+3669-2.1 along with the other Coreboot packages, but I passed on Superiotool because it looks like an app that will make it easier for me accidentally break something. I had to reboot into Windows 7 Home Premium to use Cpu-z for the information in the screenshot. I honestly don't know whether or not cpu-z would have worked system-wide from a Virtualbox guest Windows on Ubuntu (as host). I suppose I could stop right here and see . . . No; cpu-z on Windows 7 Ultimate (guest) on Ubuntu 11.10 (host) only showed the virtual machine specs – at least as I have it set.
Since AMD announced last May that all of its processors will support Coreboot beginning with Llano (and having supported Coreboot all along since 1999), I can see nVidia offering some alternative Linux BIOS options for its mainboards not supported by Coreboot (perhaps some Openboot, Openfirmware, or U-boot implementations). But thus far, I haven't identified the origin or content of BIOS for Linux eMachines P01.B4L1013.6 KB12/05/2011.
It looks to me as if my computer has a nVidia motherboard and on the nVidia website, nVidia offers BIOS updates for that motherboard that are branded “eMachines.” After also noting Nvidia's stated commitment to Linux, (e.g. http://www.zotac.com/index.php?option=c ... 18&lang=em
) “Why isn't the NVIDIA drivers open source (sic)."
I'd be comfortable trying it out; and my computer does have “restore default settings” options in the BIOS. And the eMachines recovery app (preinstalled on sda2) is said to restore the machine to delivery settings provided that all hardware is intact. Of course, I don't know if either actually work (and I'm not wanting to undo any changes I've made).
As it turns out, I have not been able to execute the directions given in the P01.B4L1013.6 README. And apparently I'm not only one; at some point I'll post a thread at Windows 7 IT Pro Forums, where a couple of similar problems are already discussed at http://social.technet.microsoft.com/For ... 7fda88b694
. But it will be just academic because coreboot does just fine on this computer and on the Oses on which I have it installed.
Thank you for all the responses; it's appreciated.
Compaq tc4400 notebook/tablet, 2.0 GHz, 3 GB ram, 160 GB HD, (no optical drive); Windows 8, Linux Mint 13 Maya/Mat`e.