Mint 17 Cinnamon

Italian Forum

Mint 17 Cinnamon

Postby vittoriogubbiotti on Thu May 22, 2014 4:02 am

Scusate se non passo per la sezione di presentazione, ma intanto volevo fare alcune osservazioni sulla release LTS Quiana. La avevo installata sul portatile ACER Aspire 5672 WLMi che uso diciamo per le prove, e che funziona sempre benissimo.
Ho dovuto smontarla di corsa e tornare a Petra 16 in quanto il kernel generic mi andava in panico sia sulla gestione della webcam Orbicam interna - perfetta in Petra - che su alcuni programmi che avevo poi installato. Il mio dubbio è che la 17 abbia ancora bisogno di molto, molto lavoro sul kernel, voi che impressione avete avuto?

Saluti cordiali, Vittorio, da Perugia
vittoriogubbiotti
Level 1
Level 1
 
Posts: 7
Joined: Tue May 20, 2014 4:17 am

Linux Mint is funded by ads and donations.
 

Re: Mint 17 Cinnamon

Postby domike on Thu May 22, 2014 5:24 am

Ciao e benvenuto!

La prima cosa da fare è aggiornare il kernel e le applicazioni incriminate (è possibile che i bug siano già segnalati e corretti, perché kernel e applicazioni sono resi pubblici 1 mese prima della pubblicazione di Mint).

Se questo non risolve i problemi, segnalarli è essenziale. Tu stesso puoi segnalarli. Ciascun programma ha il proprio sito web per la segnalazione dei bug. Infatti, Mint è una collezione di software indipendenti, sviluppati in diverse parti del mondo. Il team di Mint non lavora sul kernel, né sulle applicazioni (eccetto piccole modifiche per armonizzare).


In alternativa, mi offro di segnalarli per tuo conto, mi servono queste informazioni:

Per la webcam:

Indica i passi che riproducono il problema su un hardware uguale al tuo.

Apri un terminale, incolla e premi Invio:
Code: Select all
lspci -vvnn

e incolla il risultato qui sotto,tra tag [code].

Scatta una foto leggibile del panic, caricala su imgur.com o altro sito, e dammi il link.

Per ciascun programma che dà problemi:

Indica i passi con i quali posso riprodurre il problema sul mio computer.

Grazie!
domike
Level 1
Level 1
 
Posts: 43
Joined: Tue Feb 04, 2014 3:06 am

Re: Mint 17 Cinnamon

Postby vittoriogubbiotti on Thu May 22, 2014 8:31 am

domike wrote:Ciao e benvenuto!

La prima cosa da fare è aggiornare il kernel e le applicazioni incriminate (è possibile che i bug siano già segnalati e corretti, perché kernel e applicazioni sono resi pubblici 1 mese prima della pubblicazione di Mint).

Se questo non risolve i problemi, segnalarli è essenziale. Tu stesso puoi segnalarli. Ciascun programma ha il proprio sito web per la segnalazione dei bug. Infatti, Mint è una collezione di software indipendenti, sviluppati in diverse parti del mondo. Il team di Mint non lavora sul kernel, né sulle applicazioni (eccetto piccole modifiche per armonizzare).



Lo farei volentieri, ma per ora ho preferito - dovendo usarlo anche per lavoro, è il secondo computer e fa molto comodo.... - retrocedere a Petra. Tra un mesetto riprovo l'installazione del 17 e ne riparliamo, dai.

PS: su un assemblato con Motherboard Foxconn e scheda grafica Nvidia proprio non vuole saperne nemmeno di partire la live - in questo caso, la 64 - nemmeno in compatibility, ma quello è di mia moglie e se glielo tocco o faccio danni rischio il divorzio.

Di sicuro posso segnalare che dovrebbero mancare nel kernel alcuni legami o librerie relative all'uso della cam. Qualcuno ha fatto la stessa esperienza, magari con cam diverse?

PPS: Quindici giorni fa ho montato Petra sul computer - sempre ACER Aspire vecchiotto - di un amico, a cui ormai praticamente XP non partiva più ed era pieno di virus, e gli va come una scheggia. Prima di proporgli di evolvere voglio esser sicuro che la release sia stabilizzata.

Per finire: mi spiace di non poter contribuire oltre, ma ripeto, stavo sperimentando davvero dei problemi.

NB: Il mio "primo" comp è un Toshiba satellite 840 core 5 che appena scade la garanzia verrà quanto meno portato a dual-boot.... Ora ha Win 7 ma offre segni di instabilità, deve esserci della pazzia nel loro metodo (parlo di Microsoft).

E per finire davvero: grazie.
vittoriogubbiotti
Level 1
Level 1
 
Posts: 7
Joined: Tue May 20, 2014 4:17 am

Re: Mint 17 Cinnamon

Postby vittoriogubbiotti on Sun Jun 29, 2014 2:13 pm

Sono ripassato a Qiana e la webcam non funziona. Ecco quindi il risultato del comando che mi avevi gentilmente segnalato:

Code: Select all
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: c8100000-c81fffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 45
   Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: 44000000-441fffff
   Prefetchable memory behind bridge: 0000000044200000-00000000443fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: 44400000-446fffff
   Prefetchable memory behind bridge: 0000000044700000-00000000448fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
   I/O behind bridge: 00005000-00005fff
   Memory behind bridge: 44900000-44bfffff
   Prefetchable memory behind bridge: 0000000044c00000-0000000044dfffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
   I/O behind bridge: 00006000-00006fff
   Memory behind bridge: 44e00000-44ffffff
   Prefetchable memory behind bridge: 0000000045000000-00000000451fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 23
   Region 4: I/O ports at 1800 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 19
   Region 4: I/O ports at 1820 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 18
   Region 4: I/O ports at 1840 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 16
   Region 4: I/O ports at 1860 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 23
   Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=1K]
   Capabilities: <access denied>
   Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=56
   I/O behind bridge: 00007000-00007fff
   Memory behind bridge: c8400000-c84fffff
   Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>
   Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 19
   Region 0: I/O ports at 01f0 [size=8]
   Region 1: I/O ports at 03f4
   Region 2: I/O ports at 0170 [size=8]
   Region 3: I/O ports at 0374
   Region 4: I/O ports at 18b0 [size=16]
   Capabilities: <access denied>
   Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin B routed to IRQ 10
   Region 4: I/O ports at 18c0 [size=32]

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515/M54 [Mobility Radeon X1400] [1002:7145] (prog-if 00 [VGA controller])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
   Region 1: I/O ports at 2000 [size=256]
   Region 2: Memory at c8100000 (32-bit, non-prefetchable) [size=64K]
   [virtual] Expansion ROM at c8120000 [disabled] [size=128K]
   Capabilities: <access denied>
   Kernel driver in use: radeon

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
   Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 46
   Region 0: Memory at 44400000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>
   Kernel driver in use: iwl3945

04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express [14e4:169d] (rev 21)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 47
   Region 0: Memory at 44900000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: <access denied>
   Kernel driver in use: tg3

0a:09.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 168, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at c8404000 (32-bit, non-prefetchable) [size=4K]
   Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
   Memory window 0: 40000000-43ffffff (prefetchable)
   Memory window 1: 48000000-4bffffff
   I/O window 0: 00007000-000070ff
   I/O window 1: 00007400-000074ff
   BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
   16-bit legacy interface ports at 0001
   Capabilities: <access denied>
   Kernel driver in use: yenta_cardbus

0a:09.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at c8405000 (32-bit, non-prefetchable) [size=2K]
   Region 1: Memory at c8400000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: firewire_ohci

0a:09.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at c8406000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>
   Kernel driver in use: tifm_7xx1


A presto!
vittoriogubbiotti
Level 1
Level 1
 
Posts: 7
Joined: Tue May 20, 2014 4:17 am

Re: Mint 17 Cinnamon

Postby vittoriogubbiotti on Tue Jul 01, 2014 2:08 am

Nel frattempo, su questo vecchio portatile che uso sostanzialmente come cavia, poverino, sono passato all'edizione Debian di Mint, che mi sembra eccellente. La cam funziona, ma come dice Jep Gambardella, "a tratti" - e maluccio. Questo l'output dello stesso comando in Debian Mint:

Code: Select all
vittorio@5672wlmi ~ $ lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: c8100000-c81fffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 45
   Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: 44000000-441fffff
   Prefetchable memory behind bridge: 0000000044200000-00000000443fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: 44400000-446fffff
   Prefetchable memory behind bridge: 0000000044700000-00000000448fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
   I/O behind bridge: 00005000-00005fff
   Memory behind bridge: 44900000-44bfffff
   Prefetchable memory behind bridge: 0000000044c00000-0000000044dfffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
   I/O behind bridge: 00006000-00006fff
   Memory behind bridge: 44e00000-44ffffff
   Prefetchable memory behind bridge: 0000000045000000-00000000451fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 23
   Region 4: I/O ports at 1800 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 19
   Region 4: I/O ports at 1820 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 18
   Region 4: I/O ports at 1840 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 16
   Region 4: I/O ports at 1860 [size=32]
   Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 23
   Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=1K]
   Capabilities: <access denied>
   Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=56
   I/O behind bridge: 00007000-00007fff
   Memory behind bridge: c8400000-c84fffff
   Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>
   Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 19
   Region 0: I/O ports at 01f0 [size=8]
   Region 1: I/O ports at 03f4
   Region 2: I/O ports at 0170 [size=8]
   Region 3: I/O ports at 0374
   Region 4: I/O ports at 18b0 [size=16]
   Capabilities: <access denied>
   Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin B routed to IRQ 19
   Region 4: I/O ports at 18c0 [size=32]

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV515/M54 [Mobility Radeon X1400] [1002:7145] (prog-if 00 [VGA controller])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
   Region 1: I/O ports at 2000 [size=256]
   Region 2: Memory at c8100000 (32-bit, non-prefetchable) [size=64K]
   [virtual] Expansion ROM at c8120000 [disabled] [size=128K]
   Capabilities: <access denied>
   Kernel driver in use: radeon

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
   Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 46
   Region 0: Memory at 44400000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>
   Kernel driver in use: iwl3945

04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express [14e4:169d] (rev 21)
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 47
   Region 0: Memory at 44900000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: <access denied>
   Kernel driver in use: tg3

0a:09.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 168, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at c8404000 (32-bit, non-prefetchable) [size=4K]
   Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
   Memory window 0: 40000000-43ffffff (prefetchable)
   Memory window 1: 48000000-4bffffff
   I/O window 0: 00007000-000070ff
   I/O window 1: 00007400-000074ff
   BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
   16-bit legacy interface ports at 0001
   Kernel driver in use: yenta_cardbus

0a:09.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at c8405000 (32-bit, non-prefetchable) [size=2K]
   Region 1: Memory at c8400000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: firewire_ohci

0a:09.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
   Subsystem: Acer Incorporated [ALI] Device [1025:0094]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at c8406000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>
   Kernel driver in use: tifm_7xx1


Se qualcuno ci capisce, sono davvero curioso. Devo dire che Debian, una volta montata la versione PAE, funziona bene e riconosce bene il Dual Core, cosa che mi sembrava Cinnamon normale non facesse (in effetti, facendo lavorare bene il Dual Core T2300 in parallelo, scalda anche meno).
vittoriogubbiotti
Level 1
Level 1
 
Posts: 7
Joined: Tue May 20, 2014 4:17 am

Re: Mint 17 Cinnamon

Postby vittoriogubbiotti on Sat Aug 23, 2014 3:02 am

Uppo per consistenza e costanza del problema webcam in Quiana.
vittoriogubbiotti
Level 1
Level 1
 
Posts: 7
Joined: Tue May 20, 2014 4:17 am


Return to Italiano (Italian)

Who is online

Users browsing this forum: No registered users and 2 guests