En primer lugar, se necesita una máquina XP que M $ ha sacado de la terminal de vista hiper arriba.
a continuación, entrar en su administrador de dispositivos y tomar notas sobre lo que el puerto com ZTE está relacionada con (el mío era el COM-4 (tengo el número de puerto de las propiedades del módem controlador en el Administrador de dispositivos), y envió a los comandos AT al módem. .. Problema resuelto!
Aquí está cómo configurar Hyper Terminal y desactivar la interfaz del CD-ROM del módem:
Primero Abrir Hyper Terminal.
Segundo Cancelar el asistente "Nueva conexión".
Tercero 'Propiedades' Pick del menú "Archivo".
Cuarto Seleccione la pestaña "Configuración".
Quinto Haga clic en "Configuración ASCII ..." botón.
Sexto Y marque la casilla de verificación 'Eco de los caracteres escritos localmente ".
Hyper Terminal ya está listo para ser utilizado con humanidad! Crear una conexión nueva mediante la selección de "Nueva conexión" en el menú "Archivo". Siga el asistente, y establecer los parámetros en consecuencia.
Por último, escriba lo siguiente en la Terminal de Hyper ventana de la consola (pero como he mencionado antes, y lo hizo a mi ZTE626 y C885 Sierra, el tuyo puede ser diferente, así que consulta el manual - pero esto debería funcionar en la mayoría de los módems):
AT + ZCDRUN = 8
Y el módem debe responder con:
Cerca resultado del estado de ejecución automática (0: 1 FALLO: ÉXITO): 1
Para volver a habilitar la interfaz del CD-ROM, escriba lo siguiente:
AT + ZCDRUN = 9
Y el módem debe responder con:
Abra el estado de ejecución automática resultado (0: 1 ERROR: ÉXITO): 1
Si lo desea, en primera Asegúrese de que su módem es compatible con el comando ZCDRUN escribiendo el siguiente comando:
AT + ZCDRUN?
Si es compatible, el módem debe responder con:
+ ZCDRUN, en Aceptar.
Prueba en tu linux. mía ahora funciona en todos los LinuxMint / distribuciones Ubuntu y Kubuntu
También puede pagar para descargar el firmware más reciente para el ZTE MF626
Listen
Read phoneticallyDictionary - View detailed dictionary
first up, you will need a xp machine as m$ has removed hyper terminal from vista up.
then go into your device manager and take note on what com port the zte is connected to (mine was on COM-4 (I got the port number from the modem driver properties in Device Manager), and sent the AT commands to the modem...Problem solved!
Here's how to configure Hyper Terminal and disable the CD-ROM interface of the modem:
1. Open Hyper Terminal.
2. Cancel the 'New Connection' wizard.
3. Pick 'Properties' from the 'File' menu.
4. Select the 'Settings' tab.
5. Click on 'ASCII Setup...' button.
6. And tick the check box 'Echo typed characters locally'.
Now Hyper Terminal is ready to be humanely used! Create a new connection by selecting 'New Connection' from the 'File' menu. Follow the wizard, and set your parameters accordingly.
Finally, type the following at the Hyper Terminal console window (but like ive mentioned earlier, i did this to my ZTE626 and Sierra C885, yours maybe different, so check your manual - but this should work on majority of modems):
AT+ZCDRUN=8
And the modem should reply with:
Close autorun state result(0:FAIL 1:SUCCESS):1
To re-enable the CD-ROM interface, type the following:
AT+ZCDRUN=9
And the modem should reply with:
Open autorun state result(0:FAIL 1:SUCCESS):1
You may want to ensure at first that your modem supports the ZCDRUN command by typing the following command:
AT+ZCDRUN?
If it's supported, the modem should respond with:
+ZCDRUN,OK.
Test on your linux. mine now works on all linuxmint / ubuntu & kubuntu distros
May also pay to download the latest ZTE firmware for your mf626