no sound in Daryna solved
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions use the other forums in the support section.
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
no sound in Daryna solved
Hi, due to a motherboard failure I had to do a forced upgrade on my system. I had sound before the upgrade using ALSA, the set was a Biostar board with an AMD 3800 single core, 1GB PC3200 RAM and a Samsung 400GB PATA drive. I used the on board AC97
sound set up. Worked fine till the board died! The current set up is an AMD 6000 Dual Core with an Asrock board, 2 GB PC6400 DDR2 RAM, 500GB Samsung SATA Drive. Using the on board CM6501 audio, Audio controller is listed as; Standard Open HCD USB Host Controller, DirectX version is DirectX 9.0c. I am using (or trying to use) ALSA, but no joy. Interestingly the same sound set up works fine when I insert a "PC Linux OS" live CD and use the default "Kmix".
sound set up. Worked fine till the board died! The current set up is an AMD 6000 Dual Core with an Asrock board, 2 GB PC6400 DDR2 RAM, 500GB Samsung SATA Drive. Using the on board CM6501 audio, Audio controller is listed as; Standard Open HCD USB Host Controller, DirectX version is DirectX 9.0c. I am using (or trying to use) ALSA, but no joy. Interestingly the same sound set up works fine when I insert a "PC Linux OS" live CD and use the default "Kmix".
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Re: no sound in Daryna
You did not tell us if you use the main or the KDE edition - can make quite a difference
and
Please post the result of lspci (in a Code box)
and
I hope not - this is - well, a USB Host ControllerAudio controller is listed as; Standard Open HCD USB Host Controller
Please post the result of lspci (in a Code box)
Re: no sound in Daryna
Hi Husse, thanks for the reply. I use the main edition. Not exactly sure what you mean by "lspci in a code box"? Thanks, Calymea.
- GrayWizardLinux
- Level 6
- Posts: 1232
- Joined: Wed Sep 12, 2007 5:47 pm
- Location: Anywhere I Am!
Re: no sound in Daryna
you could check this too - I had to do this to get sound on my thinkpad:
taken from a post of mine -------
"Ok - I just went into sound again and under default mixer tracks chose pcm - I did this before a couple of times but it never took. Did it this time and it works!!!!!!
from http://www.thinkwiki.org/wiki/Installin ... tsy_Gibbon)_on_a_ThinkPad_R61
Sound
Sound card drivers are loaded out of the box but the default sound device is Microphone for some reason. You can see this by opening up the Volume Control window by right clicking on the taskbar volume applet and selecting "Open Volume Control". Because of this the special Volume buttons will also change the volume of the Microphone. To change this, click on System-> Preferences -> Sound and set Default Mixer Track to PCM."
it now works. I did have sound though prior to this but only adjustable by the icon in the panel - not the buttons.
check this - it may help or it may not even be a fix for your specific situation. Just trying to offer some advice.
taken from a post of mine -------
"Ok - I just went into sound again and under default mixer tracks chose pcm - I did this before a couple of times but it never took. Did it this time and it works!!!!!!
from http://www.thinkwiki.org/wiki/Installin ... tsy_Gibbon)_on_a_ThinkPad_R61
Sound
Sound card drivers are loaded out of the box but the default sound device is Microphone for some reason. You can see this by opening up the Volume Control window by right clicking on the taskbar volume applet and selecting "Open Volume Control". Because of this the special Volume buttons will also change the volume of the Microphone. To change this, click on System-> Preferences -> Sound and set Default Mixer Track to PCM."
it now works. I did have sound though prior to this but only adjustable by the icon in the panel - not the buttons.
check this - it may help or it may not even be a fix for your specific situation. Just trying to offer some advice.
Linux Mint - Pure Bliss!
Re: no sound in Daryna
I agree that was not quite clear, sorry I'll try to express it better in the futurecalymea wrote:Hi Husse, thanks for the reply. I use the main edition. Not exactly sure what you mean by "lspci in a code box"? Thanks, Calymea.
lspci in a terminal (of course)
Then paste it as Code because if you do that your post does not get so long, "lspci" is partially hidden
As code we get a box you can scroll.
Re: no sound in Daryna
Code: Select all
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:01.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
06:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
- GrayWizardLinux
- Level 6
- Posts: 1232
- Joined: Wed Sep 12, 2007 5:47 pm
- Location: Anywhere I Am!
Re: no sound in Daryna
thanks Husse - I never knew about pasting code that way....
Linux Mint - Pure Bliss!
Re: no sound in Daryna
Code: Select all
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
Code: Select all
alsamixer
Re: no sound in Daryna
It's not the ICH8 and I'm not sure if the tricks for ICH8 will work - but perhaps you find a solution here82801FB/FBM/FR/FW/FRW (ICH6 Family)
http://ubuntuforums.org/showthread.php?t=205449
The major sound guide
Re: no sound in Daryna
Hi, still having hassles. Perhaps a PCI sound card may be easier? Can anyone recommend a good, easy to get one that works well? Anything I need to know to set it up correctly? Thanks all.
Re: no sound in Daryna
It would seem so - not that many questions about sound in the beta topicThe new kernel seems to be less tricky with audio hardware.
Re: no sound in Daryna
Ok then. I know Elyssa is still in beta, but do we have a rough idea when we might see the final release (all going well)?
Thanks.
Thanks.
Re: no sound in Daryna
Hi everyone, looks like good news. Downloaded and tested Elyssa on live cd and sound works! So hopefully this will solve this issue, yet to try install. Fingers crossed. Thanks.
Re: no sound in Daryna
Hello, looks like good news. Tested Mint 5 on live cd and sound worked, have now installed Elyssa and sound seems to be working ok. Looking good at the moment, hopefully this a permanent fix to this issue.
Thanks to all.
Thanks to all.