Maya resume from USB wireless keyboard help

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read how to get help

Maya resume from USB wireless keyboard help

Postby boourns on Mon Jan 21, 2013 8:04 pm

I'm dual booting Win 7 and Mint 13 Maya with Cinnamon, have only minor previous experience with linux. I have gotten resume from usb working in the past on a old machine with xbmc, but can't get it working on this one. I've searched multiple sources and found multiple tutorials ranging from simple changes to /proc/acpi/wakeup and rc.local... to long tutorials involving multiple custom scripts. So not sure where I should start...

I've tried basic commands like... sudo sh -c "echo USB3 > /proc/acpi/wakeup" ... but it changed nothing, USB3 still shows disabled status. (BIOS shows front USB port is USB3)

results of cat /proc/acpi/wakeup:
Code: Select all
Device   S-state     Status   Sysfs node
P0P1     S4   *disabled 
USB1     S3   *disabled 
USB2     S3   *disabled 
USB3     S3   *disabled 
USB4     S3   *disabled 
USB5     S3   *disabled 
USB6     S3   *disabled 
USB7     S3   *disabled 
RP01     S4   *disabled 
PXSX     S4   *disabled 
RP02     S4   *disabled 
PXSX     S4   *disabled 
RP03     S4   *disabled 
PXSX     S4   *disabled 
RP04     S4   *disabled 
PXSX     S4   *disabled 
RP05     S4   *disabled 
PXSX     S4   *disabled 
RP06     S4   *disabled 
PXSX     S4   *disabled 
RP07     S4   *disabled 
PXSX     S4   *disabled 
RP08     S4   *disabled 
PXSX     S4   *disabled 
PEG0     S4   *disabled 
PEGP     S4   *disabled 
PEG1     S4   *disabled 
PEG2     S4   *disabled 
PEG3     S4   *disabled 
GLAN     S4   *enabled   pci:0000:00:19.0
EHC1     S4   *enabled   pci:0000:00:1d.0
EHC2     S4   *enabled   pci:0000:00:1a.0
XHC     S4   *disabled 
HDEF     S4   *disabled  pci:0000:00:1b.0
PWRB     S3   *enabled   


lsusb results:
Code: Select all
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver


Thanks in advance if anyone can point me in the right direction here!
boourns
Level 1
Level 1
 
Posts: 2
Joined: Mon Jan 21, 2013 6:06 pm

Linux Mint is funded by ads and donations.
 

Re: Maya resume from USB wireless keyboard help

Postby snison on Tue Jan 22, 2013 12:39 am

Is there an option in the BIOS for wake from USB? Common for Dell Notebooks and some others.
I generally don't use salutation, valedication, or please when answering your questions. I'm not a jerk; you have a question, I have a possible solution.
snison
Level 2
Level 2
 
Posts: 81
Joined: Wed Dec 26, 2012 12:42 am

Re: Maya resume from USB wireless keyboard help

Postby boourns on Tue Jan 22, 2013 5:06 am

snison wrote:Is there an option in the BIOS for wake from USB? Common for Dell Notebooks and some others.

No, nothing needs to be enabled in the BIOS from what I could find. Windows 7 wakes from sleep using the same keyboard.
For reference, the hardware is an Intel NUC
boourns
Level 1
Level 1
 
Posts: 2
Joined: Mon Jan 21, 2013 6:06 pm

Re: Maya resume from USB wireless keyboard help

Postby zeke on Wed Jan 30, 2013 11:06 pm

I believe you will need to put the following in your rc.local
Code: Select all
echo enabled > /sys/bus/usb/devices/usb2/power/wakeup
echo enabled > /sys/bus/usb/devices/2-3/power/wakeup

and reboot.
The 2 is the bus and the 3 is the device for the logitech entry in your lsusb output. At least this did it for me.
zeke
Level 1
Level 1
 
Posts: 29
Joined: Sat Sep 11, 2010 6:34 pm


Return to Newbie Questions

Who is online

Users browsing this forum: Mute Ant, Yahoo [Bot] and 22 guests