Canoot mount partitions

All Gurus once were Newbies
Forum rules
There are no such things as "stupid" questions. However if you think your question is a bit stupid, then this is the right place for you to post it. Please stick to easy to-the-point questions that you feel people can answer fast. For long and complicated questions prefer the other forums within the support section.
Before you post please read this

Canoot mount partitions

Postby skos on Mon Mar 11, 2013 1:28 am

I would like to mount all the partitions like the way i do it with windows but i only few of them allow as user to explore and rwx on them.
Here is the output of a script for my partitions
Boot Info Script 0.61 [1 April 2012]


============================= Boot Info Summary: ===============================

=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 98 for .
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:

---------------------------------------------------------------------------
search.fs_uuid d61f661c-65b3-4ed6-acb2-8b9fa28f33d6 root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 98 for .

sda1: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 14 Nadia
Boot files: /boot/grub/grub.cfg /etc/fstab

sdb1: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:

sdb2: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: According to the info in the boot sector, sdb2 starts
at sector 63. But according to the info from fdisk,
sdb2 starts at sector 409600063.
Operating System:
Boot files:

sdb3: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: According to the info in the boot sector, sdb3 starts
at sector 63. But according to the info from fdisk,
sdb3 starts at sector 614400063.
Operating System:
Boot files:

sdb4: __________________________________________________________________________

File system: Extended Partition
Boot sector type: Unknown
Boot sector info:

sdb5: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sdc2: __________________________________________________________________________

File system: btrfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files:

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 2,048 156,301,311 156,299,264 83 Linux


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdb1 2,048 208,824,319 208,822,272 83 Linux
/dev/sdb2 409,600,063 614,400,062 204,800,000 7 NTFS / exFAT / HPFS
/dev/sdb3 614,400,063 976,768,064 362,368,002 7 NTFS / exFAT / HPFS
/dev/sdb4 208,826,366 409,599,999 200,773,634 5 Extended
/dev/sdb5 208,828,416 409,599,999 200,771,584 7 NTFS / exFAT / HPFS


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdc2 2,000,896 78,163,967 76,163,072 83 Linux


"blkid" output: ________________________________________________________________

Device UUID TYPE LABEL

/dev/sda1 2fa7b4a8-9e88-44ce-8812-ff52fc58dd7f ext4 OS1
/dev/sdb1 0f0bbf2c-07f9-4950-ab0e-f8e7c7599df9 ext4
/dev/sdb2 E23AF54F3AF520E9 ntfs PROG_FILES
/dev/sdb3 7C1E19A31E19580A ntfs New Volume
/dev/sdb5 2EBBA3A241140D3E ntfs
/dev/sdc2 76cea449-c3ec-4776-9723-21a040bdfc41 btrfs

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/sda1 / ext4 (rw)
/dev/sdb2 /media/PROG_FILES fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb3 /media/sdb3 fuseblk (ro,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdb5 /media/2EBBA3A241140D3E fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdc2 /media/76cea449-c3ec-4776-9723-21a040bdfc41 btrfs (rw)


=========================== sda1/boot/grub/grub.cfg: ===========================

THANKS
skos
Level 1
Level 1
 
Posts: 7
Joined: Mon Mar 11, 2013 1:22 am

Linux Mint is funded by ads and donations.
 

Re: Canoot mount partitions

Postby skos on Wed Mar 13, 2013 1:48 pm

None?
skos
Level 1
Level 1
 
Posts: 7
Joined: Mon Mar 11, 2013 1:22 am

Re: Canoot mount partitions

Postby kyphi on Wed Mar 13, 2013 6:45 pm

like the way i do it with windows


What does that mean?

To mount any of my partitions I left click on them in Nemo where they are all listed ... and then they are mounted and can be read. Similarly, they can also be unmounted in Nemo.
kyphi
Level 5
Level 5
 
Posts: 759
Joined: Sat Jul 09, 2011 1:14 am
Location: Australia

Re: Canoot mount partitions

Postby skos on Thu Mar 14, 2013 12:43 am

i use Dolphin, but mount is working only as root
skos
Level 1
Level 1
 
Posts: 7
Joined: Mon Mar 11, 2013 1:22 am

Re: Canoot mount partitions

Postby kyphi on Thu Mar 14, 2013 6:43 pm

It appears that you have posted in the wrong forum. You might find a solution in the KDE forum.
Try here: viewforum.php?f=109
kyphi
Level 5
Level 5
 
Posts: 759
Joined: Sat Jul 09, 2011 1:14 am
Location: Australia


Return to Newbie Questions

Who is online

Users browsing this forum: No registered users and 31 guests